linux/drivers/scsi/aic94xx/aic94xx_seq.c

1405 lines
46 KiB
C
Raw Normal View History

[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/*
* Aic94xx SAS/SATA driver sequencer interface.
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* Parts of this code adapted from David Chaw's adp94xx_seq.c.
*
* This file is licensed under GPLv2.
*
* This file is part of the aic94xx driver.
*
* The aic94xx driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* The aic94xx driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the aic94xx driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#include <linux/firmware.h>
#include "aic94xx_reg.h"
#include "aic94xx_hwi.h"
#include "aic94xx_seq.h"
#include "aic94xx_dump.h"
/* It takes no more than 0.05 us for an instruction
* to complete. So waiting for 1 us should be more than
* plenty.
*/
#define PAUSE_DELAY 1
#define PAUSE_TRIES 1000
static const struct firmware *sequencer_fw;
static const char *sequencer_version;
static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task,
cseq_idle_loop, lseq_idle_loop;
static u8 *cseq_code, *lseq_code;
static u32 cseq_code_size, lseq_code_size;
static u16 first_scb_site_no = 0xFFFF;
static u16 last_scb_site_no;
/* ---------- Pause/Unpause CSEQ/LSEQ ---------- */
/**
* asd_pause_cseq - pause the central sequencer
* @asd_ha: pointer to host adapter structure
*
* Return 0 on success, negative on failure.
*/
int asd_pause_cseq(struct asd_ha_struct *asd_ha)
{
int count = PAUSE_TRIES;
u32 arp2ctl;
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (arp2ctl & PAUSED)
return 0;
asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (arp2ctl & PAUSED)
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't pause CSEQ\n");
return -1;
}
/**
* asd_unpause_cseq - unpause the central sequencer.
* @asd_ha: pointer to host adapter structure.
*
* Return 0 on success, negative on error.
*/
int asd_unpause_cseq(struct asd_ha_struct *asd_ha)
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (!(arp2ctl & PAUSED))
return 0;
asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL);
if (!(arp2ctl & PAUSED))
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't unpause the CSEQ\n");
return -1;
}
/**
* asd_seq_pause_lseq - pause a link sequencer
* @asd_ha: pointer to a host adapter structure
* @lseq: link sequencer of interest
*
* Return 0 on success, negative on error.
*/
static inline int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq)
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (arp2ctl & PAUSED)
return 0;
asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (arp2ctl & PAUSED)
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq);
return -1;
}
/**
* asd_pause_lseq - pause the link sequencer(s)
* @asd_ha: pointer to host adapter structure
* @lseq_mask: mask of link sequencers of interest
*
* Return 0 on success, negative on failure.
*/
int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
{
int lseq;
int err = 0;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_seq_pause_lseq(asd_ha, lseq);
if (err)
return err;
}
return err;
}
/**
* asd_seq_unpause_lseq - unpause a link sequencer
* @asd_ha: pointer to host adapter structure
* @lseq: link sequencer of interest
*
* Return 0 on success, negative on error.
*/
static inline int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq)
{
u32 arp2ctl;
int count = PAUSE_TRIES;
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (!(arp2ctl & PAUSED))
return 0;
asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE);
do {
arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq));
if (!(arp2ctl & PAUSED))
return 0;
udelay(PAUSE_DELAY);
} while (--count > 0);
ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq);
return 0;
}
/**
* asd_unpause_lseq - unpause the link sequencer(s)
* @asd_ha: pointer to host adapter structure
* @lseq_mask: mask of link sequencers of interest
*
* Return 0 on success, negative on failure.
*/
int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask)
{
int lseq;
int err = 0;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_seq_unpause_lseq(asd_ha, lseq);
if (err)
return err;
}
return err;
}
/* ---------- Downloading CSEQ/LSEQ microcode ---------- */
static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size)
{
u32 addr = CSEQ_RAM_REG_BASE_ADR;
const u32 *prog = (u32 *) _prog;
u32 i;
for (i = 0; i < size; i += 4, prog++, addr += 4) {
u32 val = asd_read_reg_dword(asd_ha, addr);
if (le32_to_cpu(*prog) != val) {
asd_printk("%s: cseq verify failed at %u "
"read:0x%x, wanted:0x%x\n",
pci_name(asd_ha->pcidev),
i, val, le32_to_cpu(*prog));
return -1;
}
}
ASD_DPRINTK("verified %d bytes, passed\n", size);
return 0;
}
/**
* asd_verify_lseq - verify the microcode of a link sequencer
* @asd_ha: pointer to host adapter structure
* @_prog: pointer to the microcode
* @size: size of the microcode in bytes
* @lseq: link sequencer of interest
*
* The link sequencer code is accessed in 4 KB pages, which are selected
* by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register.
* The 10 KB LSEQm instruction code is mapped, page at a time, at
* LmSEQRAM address.
*/
static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size, int lseq)
{
#define LSEQ_CODEPAGE_SIZE 4096
int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE;
u32 page;
const u32 *prog = (u32 *) _prog;
for (page = 0; page < pages; page++) {
u32 i;
asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq),
page << LmRAMPAGE_LSHIFT);
for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE;
i += 4, prog++, size-=4) {
u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i);
if (le32_to_cpu(*prog) != val) {
asd_printk("%s: LSEQ%d verify failed "
"page:%d, offs:%d\n",
pci_name(asd_ha->pcidev),
lseq, page, i);
return -1;
}
}
}
ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq,
(int)((u8 *)prog-_prog));
return 0;
}
/**
* asd_verify_seq -- verify CSEQ/LSEQ microcode
* @asd_ha: pointer to host adapter structure
* @prog: pointer to microcode
* @size: size of the microcode
* @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest
*
* Return 0 if microcode is correct, negative on mismatch.
*/
static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog,
u32 size, u8 lseq_mask)
{
if (lseq_mask == 0)
return asd_verify_cseq(asd_ha, prog, size);
else {
int lseq, err;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_verify_lseq(asd_ha, prog, size, lseq);
if (err)
return err;
}
}
return 0;
}
#define ASD_DMA_MODE_DOWNLOAD
#ifdef ASD_DMA_MODE_DOWNLOAD
/* This is the size of the CSEQ Mapped instruction page */
#define MAX_DMA_OVLY_COUNT ((1U << 14)-1)
static int asd_download_seq(struct asd_ha_struct *asd_ha,
const u8 * const prog, u32 size, u8 lseq_mask)
{
u32 comstaten;
u32 reg;
int page;
const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT;
struct asd_dma_tok *token;
int err = 0;
if (size % 4) {
asd_printk("sequencer program not multiple of 4\n");
return -1;
}
asd_pause_cseq(asd_ha);
asd_pause_lseq(asd_ha, 0xFF);
/* save, disable and clear interrupts */
comstaten = asd_read_reg_dword(asd_ha, COMSTATEN);
asd_write_reg_dword(asd_ha, COMSTATEN, 0);
asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK);
asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN);
asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK);
token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL);
if (!token) {
asd_printk("out of memory for dma SEQ download\n");
err = -ENOMEM;
goto out;
}
ASD_DPRINTK("dma-ing %d bytes\n", size);
for (page = 0; page < pages; page++) {
int i;
u32 left = min(size-page*MAX_DMA_OVLY_COUNT,
(u32)MAX_DMA_OVLY_COUNT);
memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left);
asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle);
asd_write_reg_dword(asd_ha, OVLYDMACNT, left);
reg = !page ? RESETOVLYDMA : 0;
reg |= (STARTOVLYDMA | OVLYHALTERR);
reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
/* Start DMA. */
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
for (i = PAUSE_TRIES*100; i > 0; i--) {
u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL);
if (!(dmadone & OVLYDMAACT))
break;
udelay(PAUSE_DELAY);
}
}
reg = asd_read_reg_dword(asd_ha, COMSTAT);
if (!(reg & OVLYDMADONE) || (reg & OVLYERR)
|| (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){
asd_printk("%s: error DMA-ing sequencer code\n",
pci_name(asd_ha->pcidev));
err = -ENODEV;
}
asd_free_coherent(asd_ha, token);
out:
asd_write_reg_dword(asd_ha, COMSTATEN, comstaten);
return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask);
}
#else /* ASD_DMA_MODE_DOWNLOAD */
static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog,
u32 size, u8 lseq_mask)
{
int i;
u32 reg = 0;
const u32 *prog = (u32 *) _prog;
if (size % 4) {
asd_printk("sequencer program not multiple of 4\n");
return -1;
}
asd_pause_cseq(asd_ha);
asd_pause_lseq(asd_ha, 0xFF);
reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ);
reg |= PIOCMODE;
asd_write_reg_dword(asd_ha, OVLYDMACNT, size);
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n",
lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : "");
for (i = 0; i < size; i += 4, prog++)
asd_write_reg_dword(asd_ha, SPIODATA, *prog);
reg = (reg & ~PIOCMODE) | OVLYHALTERR;
asd_write_reg_dword(asd_ha, OVLYDMACTL, reg);
return asd_verify_seq(asd_ha, _prog, size, lseq_mask);
}
#endif /* ASD_DMA_MODE_DOWNLOAD */
/**
* asd_seq_download_seqs - download the sequencer microcode
* @asd_ha: pointer to host adapter structure
*
* Download the central and link sequencer microcode.
*/
static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha)
{
int err;
if (!asd_ha->hw_prof.enabled_phys) {
asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev));
return -ENODEV;
}
/* Download the CSEQ */
ASD_DPRINTK("downloading CSEQ...\n");
err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0);
if (err) {
asd_printk("CSEQ download failed:%d\n", err);
return err;
}
/* Download the Link Sequencers code. All of the Link Sequencers
* microcode can be downloaded at the same time.
*/
ASD_DPRINTK("downloading LSEQs...\n");
err = asd_download_seq(asd_ha, lseq_code, lseq_code_size,
asd_ha->hw_prof.enabled_phys);
if (err) {
/* Try it one at a time */
u8 lseq;
u8 lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_download_seq(asd_ha, lseq_code,
lseq_code_size, 1<<lseq);
if (err)
break;
}
}
if (err)
asd_printk("LSEQs download failed:%d\n", err);
return err;
}
/* ---------- Initializing the chip, chip memory, etc. ---------- */
/**
* asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha)
{
/* CSEQ Mode Independent, page 4 setup. */
asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_REG0, 0);
asd_write_reg_word(asd_ha, CSEQ_REG1, 0);
asd_write_reg_dword(asd_ha, CSEQ_REG2, 0);
asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0);
{
u8 con = asd_read_reg_byte(asd_ha, CCONEXIST);
u8 val = hweight8(con);
asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val);
}
asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0);
/* CSEQ Mode independent, page 5 setup. */
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0);
asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0);
asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0);
/* CSEQ Mode independent, page 6 setup. */
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0);
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0);
asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0);
asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0);
asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0);
asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0);
asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF);
/* Calculate the free scb mask. */
{
u16 cmdctx = asd_get_cmdctx_size(asd_ha);
cmdctx = (~((cmdctx/128)-1)) >> 8;
asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx);
}
asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD,
first_scb_site_no);
asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL,
last_scb_site_no);
asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF);
/* CSEQ Mode independent, page 7 setup. */
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0);
asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0);
asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0);
asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0);
asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0);
asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0);
}
/**
* asd_init_cseq_mdp - initialize CSEQ Mode dependent pages
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha)
{
int i;
int moffs;
moffs = CSEQ_PAGE_SIZE * 2;
/* CSEQ Mode dependent, modes 0-7, page 0 setup. */
for (i = 0; i < 8; i++) {
asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF);
asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF);
asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0);
}
/* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */
/* CSEQ Mode dependent, mode 8, page 0 setup. */
asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF);
asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0);
asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0);
asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0);
asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0);
asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0);
asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0);
asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0);
asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0);
asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0);
asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE,
(u16)last_scb_site_no+1);
asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE,
(u16)asd_ha->hw_prof.max_ddbs);
/* CSEQ Mode dependent, mode 8, page 1 setup. */
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0);
asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0);
/* CSEQ Mode dependent, mode 8, page 2 setup. */
/* Tell the sequencer the bus address of the first SCB. */
asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER,
asd_ha->seq.next_scb.dma_handle);
ASD_DPRINTK("First SCB dma_handle: 0x%llx\n",
(unsigned long long)asd_ha->seq.next_scb.dma_handle);
/* Tell the sequencer the first Done List entry address. */
asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE,
asd_ha->seq.actual_dl->dma_handle);
/* Initialize the Q_DONE_POINTER with the least significant
* 4 bytes of the first Done List address. */
asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER,
ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle));
asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE);
/* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */
}
/**
* asd_init_cseq_scratch -- setup and init CSEQ
* @asd_ha: pointer to host adapter structure
*
* Setup and initialize Central sequencers. Initialiaze the mode
* independent and dependent scratch page to the default settings.
*/
static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha)
{
asd_init_cseq_mip(asd_ha);
asd_init_cseq_mdp(asd_ha);
}
/**
* asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq)
{
int i;
/* LSEQ Mode independent page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq);
asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq),
ASD_NOTIFY_ENABLE_SPINUP);
asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000);
asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0);
/* LSEQ Mode independent page 1 setup. */
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0);
/* LSEQ Mode Independent page 2 setup. */
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0);
for (i = 0; i < 12; i += 4)
asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0);
/* LSEQ Mode Independent page 3 setup. */
/* Device present timer timeout */
asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq),
ASD_DEV_PRESENT_TIMEOUT);
/* SATA interlock timer disabled */
asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq),
ASD_SATA_INTERLOCK_TIMEOUT);
/* STP shutdown timer timeout constant, IGNORED by the sequencer,
* always 0. */
asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq),
ASD_STP_SHUTDOWN_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq),
ASD_SRST_ASSERT_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq),
ASD_RCV_FIS_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq),
ASD_ONE_MILLISEC_TIMEOUT);
/* COM_INIT timer */
asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq),
ASD_TEN_MILLISEC_TIMEOUT);
asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq),
ASD_SMP_RCV_TIMEOUT);
}
/**
* asd_init_lseq_mdp -- initialize LSEQ mode dependent pages.
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq)
{
int i;
u32 moffs;
u16 ret_addr[] = {
0xFFFF, /* mode 0 */
0xFFFF, /* mode 1 */
mode2_task, /* mode 2 */
0,
0xFFFF, /* mode 4/5 */
0xFFFF, /* mode 4/5 */
};
/*
* Mode 0,1,2 and 4/5 have common field on page 0 for the first
* 14 bytes.
*/
for (i = 0; i < 3; i++) {
moffs = i * LSEQ_MODE_SCRATCH_SIZE;
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs,
ret_addr[i]);
asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0);
asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0);
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0);
asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0);
}
/*
* Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3.
*/
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET,
ret_addr[5]);
asd_write_reg_word(asd_ha,
LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
asd_write_reg_word(asd_ha,
LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
asd_write_reg_word(asd_ha,
LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF);
asd_write_reg_byte(asd_ha,
LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0);
asd_write_reg_word(asd_ha,
LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0);
/* LSEQ Mode dependent 0, page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq),
(u16)asd_ha->hw_prof.max_ddbs);
asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq),
(u16)last_scb_site_no+1);
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
(u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16));
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
(u16) LmM0INTEN_MASK & 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0);
/* LSEQ mode dependent, mode 1, page 0 setup. */
asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0);
/* LSEQ Mode dependent mode 2, page 0 setup */
asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0);
/* LSEQ Mode dependent, mode 4/5, page 0 setup. */
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0);
/*
* Set the desired interval between transmissions of the NOTIFY
* (ENABLE SPINUP) primitive. Must be initilized to val - 1.
*/
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq),
ASD_NOTIFY_TIMEOUT - 1);
/* No delay for the first NOTIFY to be sent to the attached target. */
asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq),
ASD_NOTIFY_DOWN_COUNT);
/* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */
for (i = 0; i < 2; i++) {
int j;
/* Start from Page 1 of Mode 0 and 1. */
moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
/* All the fields of page 1 can be intialized to 0. */
for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
}
/* LSEQ Mode dependent, mode 2, page 1 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0);
/* LSEQ Mode dependent, mode 4/5, page 1. */
for (i = 0; i < LSEQ_PAGE_SIZE; i+=4)
asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0);
asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF);
asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF);
asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF);
/* LSEQ Mode dependent, mode 0, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0);
asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0);
asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0);
/* LSEQ Mode Dependent 1, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0);
asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0);
/* LSEQ Mode Dependent 2, page 2 setup. */
/* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer,
* i.e. always 0. */
asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0);
asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0);
asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0);
/* LSEQ Mode Dependent 4/5, page 2 setup. */
asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0);
asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0);
}
/**
* asd_init_lseq_scratch -- setup and init link sequencers
* @asd_ha: pointer to host adapter struct
*/
static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha)
{
u8 lseq;
u8 lseq_mask;
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
asd_init_lseq_mip(asd_ha, lseq);
asd_init_lseq_mdp(asd_ha, lseq);
}
}
/**
* asd_init_scb_sites -- initialize sequencer SCB sites (memory).
* @asd_ha: pointer to host adapter structure
*
* This should be done before initializing common CSEQ and LSEQ
* scratch since those areas depend on some computed values here,
* last_scb_site_no, etc.
*/
static void asd_init_scb_sites(struct asd_ha_struct *asd_ha)
{
u16 site_no;
u16 max_scbs = 0;
for (site_no = asd_ha->hw_prof.max_scbs-1;
site_no != (u16) -1;
site_no--) {
u16 i;
/* Initialize all fields in the SCB site to 0. */
for (i = 0; i < ASD_SCB_SIZE; i += 4)
asd_scbsite_write_dword(asd_ha, site_no, i, 0);
/* Workaround needed by SEQ to fix a SATA issue is to exclude
* certain SCB sites from the free list. */
if (!SCB_SITE_VALID(site_no))
continue;
if (last_scb_site_no == 0)
last_scb_site_no = site_no;
/* For every SCB site, we need to initialize the
* following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS,
* and SG Element Flag. */
/* Q_NEXT field of the last SCB is invalidated. */
asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no);
/* Initialize SCB Site Opcode field to invalid. */
asd_scbsite_write_byte(asd_ha, site_no,
offsetof(struct scb_header, opcode),
0xFF);
/* Initialize SCB Site Flags field to mean a response
* frame has been received. This means inadvertent
* frames received to be dropped. */
asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01);
first_scb_site_no = site_no;
max_scbs++;
}
asd_ha->hw_prof.max_scbs = max_scbs;
ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs);
ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no);
ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no);
}
/**
* asd_init_cseq_cio - initialize CSEQ CIO registers
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
{
int i;
asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0);
asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS);
asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0);
asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0);
asd_ha->seq.scbpro = 0;
asd_write_reg_dword(asd_ha, SCBPRO, 0);
asd_write_reg_dword(asd_ha, CSEQCON, 0);
/* Intialize CSEQ Mode 11 Interrupt Vectors.
* The addresses are 16 bit wide and in dword units.
* The values of their macros are in byte units.
* Thus we have to divide by 4. */
asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]);
asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]);
asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]);
/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC);
/* Initialize CSEQ Scratch Page to 0x04. */
asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04);
/* Initialize CSEQ Mode[0-8] Dependent registers. */
/* Initialize Scratch Page to 0. */
for (i = 0; i < 9; i++)
asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0);
/* Reset the ARP2 Program Count. */
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
for (i = 0; i < 8; i++) {
/* Intialize Mode n Link m Interrupt Enable. */
asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
/* Initialize Mode n Request Mailbox. */
asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
}
}
/**
* asd_init_lseq_cio -- initialize LmSEQ CIO registers
* @asd_ha: pointer to host adapter structure
*/
static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq)
{
u8 *sas_addr;
int i;
/* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */
asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC);
asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0);
/* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */
for (i = 0; i < 3; i++)
asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0);
/* Initialize Mode 5 SCRATCHPAGE to 0. */
asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0);
asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0);
/* Initialize Mode 0,1,2 and 5 Interrupt Enable and
* Interrupt registers. */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF);
/* Mode 1 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF);
/* Mode 2 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF);
/* Mode 5 */
asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK);
asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF);
/* Enable HW Timer status. */
asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK);
/* Enable Primitive Status 0 and 1. */
asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK);
asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK);
/* Enable Frame Error. */
asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK);
asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50);
/* Initialize Mode 0 Transfer Level to 512. */
asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512);
/* Initialize Mode 1 Transfer Level to 256. */
asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256);
/* Initialize Program Count. */
asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
/* Enable Blind SG Move. */
asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48);
asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq),
ASD_SATA_INTERLOCK_TIMEOUT);
(void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq));
/* Clear Primitive Status 0 and 1. */
asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF);
asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF);
/* Clear HW Timer status. */
asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF);
/* Clear DMA Errors for Mode 0 and 1. */
asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF);
asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF);
/* Clear SG DMA Errors for Mode 0 and 1. */
asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF);
asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF);
/* Clear Mode 0 Buffer Parity Error. */
asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR);
/* Clear Mode 0 Frame Error register. */
asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF);
/* Reset LSEQ external interrupt arbiter. */
asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL);
/* Set the Phy SAS for the LmSEQ WWN. */
sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr;
for (i = 0; i < SAS_ADDR_SIZE; i++)
asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]);
/* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */
asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0);
/* Set the Bus Inactivity Time Limit Timer. */
asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9);
/* Enable SATA Port Multiplier. */
asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80);
/* Initialize Interrupt Vector[0-10] address in Mode 3.
* See the comment on CSEQ_INT_* */
asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]);
asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]);
asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]);
asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]);
asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]);
asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]);
asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]);
asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]);
asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]);
asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]);
asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]);
/*
* Program the Link LED control, applicable only for
* Chip Rev. B or later.
*/
asd_write_reg_dword(asd_ha, LmCONTROL(lseq),
(LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms));
/* Set the Align Rate for SAS and STP mode. */
asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT);
asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT);
}
/**
* asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox
* @asd_ha: pointer to host adapter struct
*/
static void asd_post_init_cseq(struct asd_ha_struct *asd_ha)
{
int i;
for (i = 0; i < 8; i++)
asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF);
for (i = 0; i < 8; i++)
asd_read_reg_dword(asd_ha, CMnRSPMBX(i));
/* Reset the external interrupt arbiter. */
asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL);
}
/**
* asd_init_ddb_0 -- initialize DDB 0
* @asd_ha: pointer to host adapter structure
*
* Initialize DDB site 0 which is used internally by the sequencer.
*/
static void asd_init_ddb_0(struct asd_ha_struct *asd_ha)
{
int i;
/* Zero out the DDB explicitly */
for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4)
asd_ddbsite_write_dword(asd_ha, 0, i, 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail),
asd_ha->hw_prof.max_ddbs-1);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0);
asd_ddbsite_write_word(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh),
asd_ha->hw_prof.num_phys * 2);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF);
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00);
/* DDB 0 is reserved */
set_bit(0, asd_ha->hw_prof.ddb_bitmap);
}
/**
* asd_seq_setup_seqs -- setup and initialize central and link sequencers
* @asd_ha: pointer to host adapter structure
*/
static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha)
{
int lseq;
u8 lseq_mask;
/* Initialize SCB sites. Done first to compute some values which
* the rest of the init code depends on. */
asd_init_scb_sites(asd_ha);
/* Initialize CSEQ Scratch RAM registers. */
asd_init_cseq_scratch(asd_ha);
/* Initialize LmSEQ Scratch RAM registers. */
asd_init_lseq_scratch(asd_ha);
/* Initialize CSEQ CIO registers. */
asd_init_cseq_cio(asd_ha);
asd_init_ddb_0(asd_ha);
/* Initialize LmSEQ CIO registers. */
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq)
asd_init_lseq_cio(asd_ha, lseq);
asd_post_init_cseq(asd_ha);
}
/**
* asd_seq_start_cseq -- start the central sequencer, CSEQ
* @asd_ha: pointer to host adapter structure
*/
static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha)
{
/* Reset the ARP2 instruction to location zero. */
asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
/* Unpause the CSEQ */
return asd_unpause_cseq(asd_ha);
}
/**
* asd_seq_start_lseq -- start a link sequencer
* @asd_ha: pointer to host adapter structure
* @lseq: the link sequencer of interest
*/
static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
{
/* Reset the ARP2 instruction to location zero. */
asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop);
/* Unpause the LmSEQ */
return asd_seq_unpause_lseq(asd_ha, lseq);
}
static int asd_request_firmware(struct asd_ha_struct *asd_ha)
{
int err, i;
struct sequencer_file_header header, *hdr_ptr;
u32 csum = 0;
u16 *ptr_cseq_vecs, *ptr_lseq_vecs;
if (sequencer_fw)
/* already loaded */
return 0;
err = request_firmware(&sequencer_fw,
SAS_RAZOR_SEQUENCER_FW_FILE,
&asd_ha->pcidev->dev);
if (err)
return err;
hdr_ptr = (struct sequencer_file_header *)sequencer_fw->data;
header.csum = le32_to_cpu(hdr_ptr->csum);
header.major = le32_to_cpu(hdr_ptr->major);
header.minor = le32_to_cpu(hdr_ptr->minor);
sequencer_version = hdr_ptr->version;
header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset);
header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size);
header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset);
header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size);
header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset);
header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size);
header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset);
header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size);
header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task);
header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop);
header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop);
for (i = sizeof(header.csum); i < sequencer_fw->size; i++)
csum += sequencer_fw->data[i];
if (csum != header.csum) {
asd_printk("Firmware file checksum mismatch\n");
return -EINVAL;
}
if (header.cseq_table_size != CSEQ_NUM_VECS ||
header.lseq_table_size != LSEQ_NUM_VECS) {
asd_printk("Firmware file table size mismatch\n");
return -EINVAL;
}
ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset];
ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset];
mode2_task = header.mode2_task;
cseq_idle_loop = header.cseq_idle_loop;
lseq_idle_loop = header.lseq_idle_loop;
for (i = 0; i < CSEQ_NUM_VECS; i++)
cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]);
for (i = 0; i < LSEQ_NUM_VECS; i++)
lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]);
cseq_code = &sequencer_fw->data[header.cseq_code_offset];
cseq_code_size = header.cseq_code_size;
lseq_code = &sequencer_fw->data[header.lseq_code_offset];
lseq_code_size = header.lseq_code_size;
return 0;
}
int asd_init_seqs(struct asd_ha_struct *asd_ha)
{
int err;
err = asd_request_firmware(asd_ha);
if (err) {
asd_printk("Failed to load sequencer firmware file %s, error %d\n",
SAS_RAZOR_SEQUENCER_FW_FILE, err);
return err;
}
asd_printk("using sequencer %s\n", sequencer_version);
err = asd_seq_download_seqs(asd_ha);
if (err) {
asd_printk("couldn't download sequencers for %s\n",
pci_name(asd_ha->pcidev));
return err;
}
asd_seq_setup_seqs(asd_ha);
return 0;
}
int asd_start_seqs(struct asd_ha_struct *asd_ha)
{
int err;
u8 lseq_mask;
int lseq;
err = asd_seq_start_cseq(asd_ha);
if (err) {
asd_printk("couldn't start CSEQ for %s\n",
pci_name(asd_ha->pcidev));
return err;
}
lseq_mask = asd_ha->hw_prof.enabled_phys;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
err = asd_seq_start_lseq(asd_ha, lseq);
if (err) {
asd_printk("coudln't start LSEQ %d for %s\n", lseq,
pci_name(asd_ha->pcidev));
return err;
}
}
return 0;
}
/**
* asd_update_port_links -- update port_map_by_links and phy_is_up
* @sas_phy: pointer to the phy which has been added to a port
*
* 1) When a link reset has completed and we got BYTES DMAED with a
* valid frame we call this function for that phy, to indicate that
* the phy is up, i.e. we update the phy_is_up in DDB 0. The
* sequencer checks phy_is_up when pending SCBs are to be sent, and
* when an open address frame has been received.
*
* 2) When we know of ports, we call this function to update the map
* of phys participaing in that port, i.e. we update the
* port_map_by_links in DDB 0. When a HARD_RESET primitive has been
* received, the sequencer disables all phys in that port.
* port_map_by_links is also used as the conn_mask byte in the
* initiator/target port DDB.
*/
void asd_update_port_links(struct asd_sas_phy *sas_phy)
{
struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
const u8 phy_mask = (u8) sas_phy->port->phy_mask;
u8 phy_is_up;
u8 mask;
int i, err;
for_each_phy(phy_mask, mask, i)
asd_ddbsite_write_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared,
port_map_by_links)+i,phy_mask);
for (i = 0; i < 12; i++) {
phy_is_up = asd_ddbsite_read_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up));
err = asd_ddbsite_update_byte(asd_ha, 0,
offsetof(struct asd_ddb_seq_shared, phy_is_up),
phy_is_up,
phy_is_up | phy_mask);
if (!err)
break;
else if (err == -EFAULT) {
asd_printk("phy_is_up: parity error in DDB 0\n");
break;
}
}
if (err)
asd_printk("couldn't update DDB 0:error:%d\n", err);
}
MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE);