leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
07fb51c6bd
linux/drivers/infiniband/hw/mlx4/ah.c

200 lines
6.1 KiB
C
Raw Normal View History

IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
/*
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
#include <rdma/ib_addr.h>
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 14:19:22 +00:00
#include <rdma/ib_cache.h>
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
#include <linux/inet.h>
#include <linux/string.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
#include "mlx4_ib.h"
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
int mlx4_ib_resolve_grh(struct mlx4_ib_dev *dev, const struct ib_ah_attr *ah_attr,
u8 *mac, int *is_mcast, u8 port)
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
{
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
struct in6_addr in6;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
*is_mcast = 0;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
memcpy(&in6, ah_attr->grh.dgid.raw, sizeof in6);
if (rdma_link_local_addr(&in6))
rdma_get_ll_mac(&in6, mac);
else if (rdma_is_multicast_addr(&in6)) {
rdma_get_mcast_mac(&in6, mac);
*is_mcast = 1;
} else
return -EINVAL;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
return 0;
}
static struct ib_ah *create_ib_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr,
struct mlx4_ib_ah *ah)
{
struct mlx4_dev *dev = to_mdev(pd->device)->dev;
ah->av.ib.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24));
ah->av.ib.g_slid = ah_attr->src_path_bits;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (ah_attr->ah_flags & IB_AH_GRH) {
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
ah->av.ib.g_slid |= 0x80;
ah->av.ib.gid_index = ah_attr->grh.sgid_index;
ah->av.ib.hop_limit = ah_attr->grh.hop_limit;
ah->av.ib.sl_tclass_flowlabel |=
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
cpu_to_be32((ah_attr->grh.traffic_class << 20) |
ah_attr->grh.flow_label);
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
memcpy(ah->av.ib.dgid, ah_attr->grh.dgid.raw, 16);
}
ah->av.ib.dlid = cpu_to_be16(ah_attr->dlid);
if (ah_attr->static_rate) {
ah->av.ib.stat_rate = ah_attr->static_rate + MLX4_STAT_RATE_OFFSET;
while (ah->av.ib.stat_rate > IB_RATE_2_5_GBPS + MLX4_STAT_RATE_OFFSET &&
!(1 << ah->av.ib.stat_rate & dev->caps.stat_rate_support))
--ah->av.ib.stat_rate;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
ah->av.ib.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 28);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
return &ah->ibah;
}
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
static struct ib_ah *create_iboe_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr,
struct mlx4_ib_ah *ah)
{
struct mlx4_ib_dev *ibdev = to_mdev(pd->device);
struct mlx4_dev *dev = ibdev->dev;
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 14:19:22 +00:00
union ib_gid sgid;
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
u8 mac[6];
int err;
int is_mcast;
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 14:19:22 +00:00
u16 vlan_tag;
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
err = mlx4_ib_resolve_grh(ibdev, ah_attr, mac, &is_mcast, ah_attr->port_num);
if (err)
return ERR_PTR(err);
memcpy(ah->av.eth.mac, mac, 6);
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 14:19:22 +00:00
err = ib_get_cached_gid(pd->device, ah_attr->port_num, ah_attr->grh.sgid_index, &sgid);
if (err)
return ERR_PTR(err);
vlan_tag = rdma_get_vlan_id(&sgid);
if (vlan_tag < 0x1000)
vlan_tag |= (ah_attr->sl & 7) << 13;
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
ah->av.eth.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24));
ah->av.eth.gid_index = ah_attr->grh.sgid_index;
IB/mlx4: Add VLAN support for IBoE This patch allows IBoE traffic to be encapsulated in 802.1Q tagged VLAN frames. The VLAN tag is encoded in the GID and derived from it by a simple computation. The netdev notifier callback is modified to catch VLAN device addition/removal and the port's GID table is updated to reflect the change, so that for each netdevice there is an entry in the GID table. When the port's GID table is exhausted, GID entries will not be added. Only children of the main interfaces can add to the GID table; if a VLAN interface is added on another VLAN interface (e.g. "vconfig add eth2.6 8"), then that interfaces will not add an entry to the GID table. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-26 14:19:22 +00:00
ah->av.eth.vlan = cpu_to_be16(vlan_tag);
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
if (ah_attr->static_rate) {
ah->av.eth.stat_rate = ah_attr->static_rate + MLX4_STAT_RATE_OFFSET;
while (ah->av.eth.stat_rate > IB_RATE_2_5_GBPS + MLX4_STAT_RATE_OFFSET &&
!(1 << ah->av.eth.stat_rate & dev->caps.stat_rate_support))
--ah->av.eth.stat_rate;
}
/*
* HW requires multicast LID so we just choose one.
*/
if (is_mcast)
ah->av.ib.dlid = cpu_to_be16(0xc000);
memcpy(ah->av.eth.dgid, ah_attr->grh.dgid.raw, 16);
IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE For IBoE, SLs 0-7 are mapped to Ethernet 802.1Q user priority bits (pbits) which are part of the VLAN tag, SLs 8-15 are reserved. Under Ethernet, the ConnectX firmware treats (decode/encode) the four bit SL field in various constructs such as QPC / UD WQE / CQE as PPP0 and not as 0PPP. This correlates well to the fact that within the vlan tag the pbits are located in bits 15-13 and not 12-14. The current code wasn't consistent around that area - the encoding was correct for the IBoE QPC.path.schedule_queue field, but was wrong for IBoE CQEs and when MLX header was built. These inconsistencies resulted in wrong SL <--> wire 802.1Q pbits mapping, which is fixed by using SL <--> PPP0 all around the place. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-12-11 14:40:05 +00:00
ah->av.eth.sl_tclass_flowlabel = cpu_to_be32(ah_attr->sl << 29);
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
return &ah->ibah;
}
struct ib_ah *mlx4_ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
{
struct mlx4_ib_ah *ah;
struct ib_ah *ret;
ah = kzalloc(sizeof *ah, GFP_ATOMIC);
if (!ah)
return ERR_PTR(-ENOMEM);
if (rdma_port_get_link_layer(pd->device, ah_attr->port_num) == IB_LINK_LAYER_ETHERNET) {
if (!(ah_attr->ah_flags & IB_AH_GRH)) {
ret = ERR_PTR(-EINVAL);
} else {
/*
* TBD: need to handle the case when we get
* called in an atomic context and there we
* might sleep. We don't expect this
* currently since we're working with link
* local addresses which we can translate
* without going to sleep.
*/
ret = create_iboe_ah(pd, ah_attr, ah);
}
if (IS_ERR(ret))
kfree(ah);
return ret;
} else
return create_ib_ah(pd, ah_attr, ah); /* never fails */
}
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
int mlx4_ib_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr)
{
struct mlx4_ib_ah *ah = to_mah(ibah);
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
enum rdma_link_layer ll;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
memset(ah_attr, 0, sizeof *ah_attr);
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
ah_attr->sl = be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 28;
ah_attr->port_num = be32_to_cpu(ah->av.ib.port_pd) >> 24;
ll = rdma_port_get_link_layer(ibah->device, ah_attr->port_num);
ah_attr->dlid = ll == IB_LINK_LAYER_INFINIBAND ? be16_to_cpu(ah->av.ib.dlid) : 0;
if (ah->av.ib.stat_rate)
ah_attr->static_rate = ah->av.ib.stat_rate - MLX4_STAT_RATE_OFFSET;
ah_attr->src_path_bits = ah->av.ib.g_slid & 0x7F;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
if (mlx4_ib_ah_grh_present(ah)) {
ah_attr->ah_flags = IB_AH_GRH;
ah_attr->grh.traffic_class =
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 20;
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
ah_attr->grh.flow_label =
IB/mlx4: Add support for IBoE Add support for IBoE to mlx4_ib. The bulk of the code is handling the new address vector fields; mlx4 needs the MAC address of a remote node to include it in a WQE (for datagrams) or in the QP context (for connected QPs). Address resolution is done by assuming all unicast GIDs are either link-local IPv6 addresses. Multicast group attach/detach needs to update the NIC's multicast filters; but since attaching a QP to a multicast group can be done before the QP is bound to a port, for IBoE we need to keep track of all multicast groups that a QP is attached too before it transitions from INIT to RTR (since it does not have a port in the INIT state). Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Many things cleaned up and otherwise monkeyed with; hope I didn't introduce too many bugs. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 04:08:52 +00:00
be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) & 0xfffff;
ah_attr->grh.hop_limit = ah->av.ib.hop_limit;
ah_attr->grh.sgid_index = ah->av.ib.gid_index;
memcpy(ah_attr->grh.dgid.raw, ah->av.ib.dgid, 16);
IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters Add an InfiniBand driver for Mellanox ConnectX adapters. Because these adapters can also be used as ethernet NICs and Fibre Channel HBAs, the driver is split into two modules: mlx4_core: Handles low-level things like device initialization and processing firmware commands. Also controls resource allocation so that the InfiniBand, ethernet and FC functions can share a device without stepping on each other. mlx4_ib: Handles InfiniBand-specific things; plugs into the InfiniBand midlayer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09 01:00:38 +00:00
}
return 0;
}
int mlx4_ib_destroy_ah(struct ib_ah *ah)
{
kfree(to_mah(ah));
return 0;
}
Reference in New Issue Copy Permalink