linux/drivers/iio/light/hid-sensor-als.c

395 lines
10 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* HID Sensors Driver
* Copyright (c) 2012, Intel Corporation.
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include "../common/hid-sensors/hid-sensor-trigger.h"
enum {
CHANNEL_SCAN_INDEX_INTENSITY = 0,
CHANNEL_SCAN_INDEX_ILLUM = 1,
CHANNEL_SCAN_INDEX_MAX
};
#define CHANNEL_SCAN_INDEX_TIMESTAMP CHANNEL_SCAN_INDEX_MAX
struct als_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info als_illum;
struct {
u32 illum[CHANNEL_SCAN_INDEX_MAX];
u64 timestamp __aligned(8);
} scan;
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
int value_offset;
s64 timestamp;
};
static const u32 als_sensitivity_addresses[] = {
HID_USAGE_SENSOR_DATA_LIGHT,
HID_USAGE_SENSOR_LIGHT_ILLUM,
};
/* Channel definitions */
static const struct iio_chan_spec als_channels[] = {
{
.type = IIO_INTENSITY,
.modified = 1,
.channel2 = IIO_MOD_LIGHT_BOTH,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS) |
BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
.scan_index = CHANNEL_SCAN_INDEX_INTENSITY,
},
{
.type = IIO_LIGHT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS) |
BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE),
.scan_index = CHANNEL_SCAN_INDEX_ILLUM,
},
IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
};
/* Adjust channel real bits based on report descriptor */
static void als_adjust_channel_bit_mask(struct iio_chan_spec *channels,
int channel, int size)
{
channels[channel].scan_type.sign = 's';
/* Real storage bits will change based on the report desc. */
channels[channel].scan_type.realbits = size * 8;
/* Maximum size of a sample to capture is u32 */
channels[channel].scan_type.storagebits = sizeof(u32) * 8;
}
/* Channel read_raw handler */
static int als_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct als_state *als_state = iio_priv(indio_dev);
int report_id = -1;
u32 address;
int ret_type;
s32 min;
*val = 0;
*val2 = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->scan_index) {
case CHANNEL_SCAN_INDEX_INTENSITY:
case CHANNEL_SCAN_INDEX_ILLUM:
report_id = als_state->als_illum.report_id;
min = als_state->als_illum.logical_minimum;
address = HID_USAGE_SENSOR_LIGHT_ILLUM;
break;
default:
report_id = -1;
break;
}
if (report_id >= 0) {
hid_sensor_power_state(&als_state->common_attributes,
true);
*val = sensor_hub_input_attr_get_raw_value(
als_state->common_attributes.hsdev,
HID_USAGE_SENSOR_ALS, address,
report_id,
SENSOR_HUB_SYNC,
min < 0);
hid_sensor_power_state(&als_state->common_attributes,
false);
} else {
*val = 0;
return -EINVAL;
}
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
*val = als_state->scale_pre_decml;
*val2 = als_state->scale_post_decml;
ret_type = als_state->scale_precision;
break;
case IIO_CHAN_INFO_OFFSET:
*val = als_state->value_offset;
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SAMP_FREQ:
ret_type = hid_sensor_read_samp_freq_value(
&als_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS:
ret_type = hid_sensor_read_raw_hyst_value(
&als_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS_RELATIVE:
ret_type = hid_sensor_read_raw_hyst_rel_value(
&als_state->common_attributes, val, val2);
break;
default:
ret_type = -EINVAL;
break;
}
return ret_type;
}
/* Channel write_raw handler */
static int als_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct als_state *als_state = iio_priv(indio_dev);
int ret = 0;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
ret = hid_sensor_write_samp_freq_value(
&als_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS:
ret = hid_sensor_write_raw_hyst_value(
&als_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS_RELATIVE:
ret = hid_sensor_write_raw_hyst_rel_value(
&als_state->common_attributes, val, val2);
break;
default:
ret = -EINVAL;
}
return ret;
}
static const struct iio_info als_info = {
.read_raw = &als_read_raw,
.write_raw = &als_write_raw,
};
/* Callback handler to send event after all samples are received and captured */
static int als_proc_event(struct hid_sensor_hub_device *hsdev,
unsigned usage_id,
void *priv)
{
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct als_state *als_state = iio_priv(indio_dev);
dev_dbg(&indio_dev->dev, "als_proc_event\n");
if (atomic_read(&als_state->common_attributes.data_ready)) {
if (!als_state->timestamp)
als_state->timestamp = iio_get_time_ns(indio_dev);
iio_push_to_buffers_with_timestamp(indio_dev, &als_state->scan,
als_state->timestamp);
als_state->timestamp = 0;
}
return 0;
}
/* Capture samples in local storage */
static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
unsigned usage_id,
size_t raw_len, char *raw_data,
void *priv)
{
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct als_state *als_state = iio_priv(indio_dev);
int ret = -EINVAL;
u32 sample_data = *(u32 *)raw_data;
switch (usage_id) {
case HID_USAGE_SENSOR_LIGHT_ILLUM:
als_state->scan.illum[CHANNEL_SCAN_INDEX_INTENSITY] = sample_data;
als_state->scan.illum[CHANNEL_SCAN_INDEX_ILLUM] = sample_data;
ret = 0;
break;
case HID_USAGE_SENSOR_TIME_TIMESTAMP:
als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes,
*(s64 *)raw_data);
break;
default:
break;
}
return ret;
}
/* Parse report which is specific to an usage id*/
static int als_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
struct iio_chan_spec *channels,
unsigned usage_id,
struct als_state *st)
{
int ret;
ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
usage_id,
HID_USAGE_SENSOR_LIGHT_ILLUM,
&st->als_illum);
if (ret < 0)
return ret;
als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_INTENSITY,
st->als_illum.size);
als_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_ILLUM,
st->als_illum.size);
dev_dbg(&pdev->dev, "als %x:%x\n", st->als_illum.index,
st->als_illum.report_id);
st->scale_precision = hid_sensor_format_scale(
HID_USAGE_SENSOR_ALS,
&st->als_illum,
&st->scale_pre_decml, &st->scale_post_decml);
return ret;
}
/* Function to initialize the processing for usage id */
static int hid_als_probe(struct platform_device *pdev)
{
int ret = 0;
static const char *name = "als";
struct iio_dev *indio_dev;
struct als_state *als_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct als_state));
if (!indio_dev)
return -ENOMEM;
platform_set_drvdata(pdev, indio_dev);
als_state = iio_priv(indio_dev);
als_state->common_attributes.hsdev = hsdev;
als_state->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_ALS,
&als_state->common_attributes,
als_sensitivity_addresses,
ARRAY_SIZE(als_sensitivity_addresses));
if (ret) {
dev_err(&pdev->dev, "failed to setup common attributes\n");
return ret;
}
indio_dev->channels = kmemdup(als_channels,
sizeof(als_channels), GFP_KERNEL);
if (!indio_dev->channels) {
dev_err(&pdev->dev, "failed to duplicate channels\n");
return -ENOMEM;
}
ret = als_parse_report(pdev, hsdev,
(struct iio_chan_spec *)indio_dev->channels,
HID_USAGE_SENSOR_ALS, als_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
goto error_free_dev_mem;
}
indio_dev->num_channels =
ARRAY_SIZE(als_channels);
indio_dev->info = &als_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
atomic_set(&als_state->common_attributes.data_ready, 0);
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-24 04:34:18 +00:00
ret = hid_sensor_setup_trigger(indio_dev, name,
&als_state->common_attributes);
if (ret < 0) {
dev_err(&pdev->dev, "trigger setup failed\n");
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-24 04:34:18 +00:00
goto error_free_dev_mem;
}
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&pdev->dev, "device register failed\n");
goto error_remove_trigger;
}
als_state->callbacks.send_event = als_proc_event;
als_state->callbacks.capture_sample = als_capture_sample;
als_state->callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_ALS,
&als_state->callbacks);
if (ret < 0) {
dev_err(&pdev->dev, "callback reg failed\n");
goto error_iio_unreg;
}
return ret;
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-24 04:34:18 +00:00
hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes);
error_free_dev_mem:
kfree(indio_dev->channels);
return ret;
}
/* Function to deinitialize the processing for usage id */
static int hid_als_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct als_state *als_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
iio_device_unregister(indio_dev);
iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-24 04:34:18 +00:00
hid_sensor_remove_trigger(indio_dev, &als_state->common_attributes);
kfree(indio_dev->channels);
return 0;
}
static const struct platform_device_id hid_als_ids[] = {
{
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200041",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_als_ids);
static struct platform_driver hid_als_platform_driver = {
.id_table = hid_als_ids,
.driver = {
.name = KBUILD_MODNAME,
.pm = &hid_sensor_pm_ops,
},
.probe = hid_als_probe,
.remove = hid_als_remove,
};
module_platform_driver(hid_als_platform_driver);
MODULE_DESCRIPTION("HID Sensor ALS");
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
MODULE_LICENSE("GPL");