leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
038d07a283
linux/arch/x86/include/asm/inst.h

312 lines
5.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
/*
* Generate .byte code for some instructions not supported by old
* binutils.
*/
#ifndef X86_ASM_INST_H
#define X86_ASM_INST_H
#ifdef __ASSEMBLY__
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
#define REG_NUM_INVALID 100
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
#define REG_TYPE_R32 0
#define REG_TYPE_R64 1
#define REG_TYPE_XMM 2
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
#define REG_TYPE_INVALID 100
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
.macro R32_NUM opd r32
\opd = REG_NUM_INVALID
.ifc \r32,%eax
\opd = 0
.endif
.ifc \r32,%ecx
\opd = 1
.endif
.ifc \r32,%edx
\opd = 2
.endif
.ifc \r32,%ebx
\opd = 3
.endif
.ifc \r32,%esp
\opd = 4
.endif
.ifc \r32,%ebp
\opd = 5
.endif
.ifc \r32,%esi
\opd = 6
.endif
.ifc \r32,%edi
\opd = 7
.endif
#ifdef CONFIG_X86_64
.ifc \r32,%r8d
\opd = 8
.endif
.ifc \r32,%r9d
\opd = 9
.endif
.ifc \r32,%r10d
\opd = 10
.endif
.ifc \r32,%r11d
\opd = 11
.endif
.ifc \r32,%r12d
\opd = 12
.endif
.ifc \r32,%r13d
\opd = 13
.endif
.ifc \r32,%r14d
\opd = 14
.endif
.ifc \r32,%r15d
\opd = 15
.endif
#endif
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.macro R64_NUM opd r64
\opd = REG_NUM_INVALID
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
#ifdef CONFIG_X86_64
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.ifc \r64,%rax
\opd = 0
.endif
.ifc \r64,%rcx
\opd = 1
.endif
.ifc \r64,%rdx
\opd = 2
.endif
.ifc \r64,%rbx
\opd = 3
.endif
.ifc \r64,%rsp
\opd = 4
.endif
.ifc \r64,%rbp
\opd = 5
.endif
.ifc \r64,%rsi
\opd = 6
.endif
.ifc \r64,%rdi
\opd = 7
.endif
.ifc \r64,%r8
\opd = 8
.endif
.ifc \r64,%r9
\opd = 9
.endif
.ifc \r64,%r10
\opd = 10
.endif
.ifc \r64,%r11
\opd = 11
.endif
.ifc \r64,%r12
\opd = 12
.endif
.ifc \r64,%r13
\opd = 13
.endif
.ifc \r64,%r14
\opd = 14
.endif
.ifc \r64,%r15
\opd = 15
.endif
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
#endif
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
.macro XMM_NUM opd xmm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
\opd = REG_NUM_INVALID
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
.ifc \xmm,%xmm0
\opd = 0
.endif
.ifc \xmm,%xmm1
\opd = 1
.endif
.ifc \xmm,%xmm2
\opd = 2
.endif
.ifc \xmm,%xmm3
\opd = 3
.endif
.ifc \xmm,%xmm4
\opd = 4
.endif
.ifc \xmm,%xmm5
\opd = 5
.endif
.ifc \xmm,%xmm6
\opd = 6
.endif
.ifc \xmm,%xmm7
\opd = 7
.endif
.ifc \xmm,%xmm8
\opd = 8
.endif
.ifc \xmm,%xmm9
\opd = 9
.endif
.ifc \xmm,%xmm10
\opd = 10
.endif
.ifc \xmm,%xmm11
\opd = 11
.endif
.ifc \xmm,%xmm12
\opd = 12
.endif
.ifc \xmm,%xmm13
\opd = 13
.endif
.ifc \xmm,%xmm14
\opd = 14
.endif
.ifc \xmm,%xmm15
\opd = 15
.endif
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.macro REG_TYPE type reg
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
R32_NUM reg_type_r32 \reg
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
R64_NUM reg_type_r64 \reg
XMM_NUM reg_type_xmm \reg
crypto: aesni-intel - Fix another CTR build failure with gas 2.16.1 The previous AES-NI CTR optimization compiling failure gas 2.16.1 fix introduces another compiling failure by itself. This patch fixes that. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-24 13:37:57 +00:00
.if reg_type_r64 <> REG_NUM_INVALID
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
\type = REG_TYPE_R64
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
.elseif reg_type_r32 <> REG_NUM_INVALID
\type = REG_TYPE_R32
crypto: aesni-intel - Fix another CTR build failure with gas 2.16.1 The previous AES-NI CTR optimization compiling failure gas 2.16.1 fix introduces another compiling failure by itself. This patch fixes that. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-24 13:37:57 +00:00
.elseif reg_type_xmm <> REG_NUM_INVALID
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
\type = REG_TYPE_XMM
.else
\type = REG_TYPE_INVALID
.endif
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
.macro PFX_OPD_SIZE
.byte 0x66
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.macro PFX_REX opd1 opd2 W=0
.if ((\opd1 | \opd2) & 8) || \W
.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) | (\W << 3)
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
.endif
.endm
.macro MODRM mod opd1 opd2
.byte \mod | (\opd1 & 7) | ((\opd2 & 7) << 3)
.endm
.macro PSHUFB_XMM xmm1 xmm2
XMM_NUM pshufb_opd1 \xmm1
XMM_NUM pshufb_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX pshufb_opd1 pshufb_opd2
.byte 0x0f, 0x38, 0x00
MODRM 0xc0 pshufb_opd1 pshufb_opd2
.endm
.macro PCLMULQDQ imm8 xmm1 xmm2
XMM_NUM clmul_opd1 \xmm1
XMM_NUM clmul_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX clmul_opd1 clmul_opd2
.byte 0x0f, 0x3a, 0x44
MODRM 0xc0 clmul_opd1 clmul_opd2
.byte \imm8
.endm
x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko <alexander_boyko@xyratex.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-29 12:43:54 +00:00
.macro PEXTRD imm8 xmm gpr
R32_NUM extrd_opd1 \gpr
XMM_NUM extrd_opd2 \xmm
PFX_OPD_SIZE
PFX_REX extrd_opd1 extrd_opd2
.byte 0x0f, 0x3a, 0x16
MODRM 0xc0 extrd_opd1 extrd_opd2
.byte \imm8
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
.macro AESKEYGENASSIST rcon xmm1 xmm2
XMM_NUM aeskeygen_opd1 \xmm1
XMM_NUM aeskeygen_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aeskeygen_opd1 aeskeygen_opd2
.byte 0x0f, 0x3a, 0xdf
MODRM 0xc0 aeskeygen_opd1 aeskeygen_opd2
.byte \rcon
.endm
.macro AESIMC xmm1 xmm2
XMM_NUM aesimc_opd1 \xmm1
XMM_NUM aesimc_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesimc_opd1 aesimc_opd2
.byte 0x0f, 0x38, 0xdb
MODRM 0xc0 aesimc_opd1 aesimc_opd2
.endm
.macro AESENC xmm1 xmm2
XMM_NUM aesenc_opd1 \xmm1
XMM_NUM aesenc_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesenc_opd1 aesenc_opd2
.byte 0x0f, 0x38, 0xdc
MODRM 0xc0 aesenc_opd1 aesenc_opd2
.endm
.macro AESENCLAST xmm1 xmm2
XMM_NUM aesenclast_opd1 \xmm1
XMM_NUM aesenclast_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesenclast_opd1 aesenclast_opd2
.byte 0x0f, 0x38, 0xdd
MODRM 0xc0 aesenclast_opd1 aesenclast_opd2
.endm
.macro AESDEC xmm1 xmm2
XMM_NUM aesdec_opd1 \xmm1
XMM_NUM aesdec_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesdec_opd1 aesdec_opd2
.byte 0x0f, 0x38, 0xde
MODRM 0xc0 aesdec_opd1 aesdec_opd2
.endm
.macro AESDECLAST xmm1 xmm2
XMM_NUM aesdeclast_opd1 \xmm1
XMM_NUM aesdeclast_opd2 \xmm2
PFX_OPD_SIZE
PFX_REX aesdeclast_opd1 aesdeclast_opd2
.byte 0x0f, 0x38, 0xdf
MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
.endm
crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1 Andrew Morton reported that AES-NI CTR optimization failed to compile with gas 2.16.1, the error message is as follow: arch/x86/crypto/aesni-intel_asm.S: Assembler messages: arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq' arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq' To fix this, a gas macro is defined to assemble movq with 64bit general purpose registers and XMM registers. The macro will generate the raw .byte sequence for needed instructions. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-13 08:28:42 +00:00
.macro MOVQ_R64_XMM opd1 opd2
REG_TYPE movq_r64_xmm_opd1_type \opd1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
XMM_NUM movq_r64_xmm_opd1 \opd1
R64_NUM movq_r64_xmm_opd2 \opd2
.else
R64_NUM movq_r64_xmm_opd1 \opd1
XMM_NUM movq_r64_xmm_opd2 \opd2
.endif
PFX_OPD_SIZE
PFX_REX movq_r64_xmm_opd1 movq_r64_xmm_opd2 1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
.byte 0x0f, 0x7e
.else
.byte 0x0f, 0x6e
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
x86: Generate .byte code for some new instructions via gas macro It will take some time for binutils (gas) to support some newly added instructions, such as SSE4.1 instructions or the AES-NI instructions found in upcoming Intel CPU. To make the source code can be compiled by old binutils, .byte code is used instead of the assembly instruction. But the readability and flexibility of raw .byte code is not good. This patch solves the issue of raw .byte code via generating it via assembly instruction like gas macro. The syntax is as close as possible to real assembly instruction. Some helper macros such as MODRM is not a full feature implementation. It can be extended when necessary. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-09 18:52:26 +00:00
#endif
#endif
Reference in New Issue Copy Permalink