linux/fs/gfs2/rgrp.c

2646 lines
69 KiB
C
Raw Normal View History

/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License version 2.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/fs.h>
#include <linux/gfs2_ondisk.h>
#include <linux/prefetch.h>
#include <linux/blkdev.h>
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
#include <linux/rbtree.h>
#include <linux/random.h>
#include "gfs2.h"
#include "incore.h"
#include "glock.h"
#include "glops.h"
#include "lops.h"
#include "meta_io.h"
#include "quota.h"
#include "rgrp.h"
#include "super.h"
#include "trans.h"
#include "util.h"
#include "log.h"
#include "inode.h"
#include "trace_gfs2.h"
#define BFITNOENT ((u32)~0)
#define NO_BLOCK ((u64)~0)
#if BITS_PER_LONG == 32
#define LBITMASK (0x55555555UL)
#define LBITSKIP55 (0x55555555UL)
#define LBITSKIP00 (0x00000000UL)
#else
#define LBITMASK (0x5555555555555555UL)
#define LBITSKIP55 (0x5555555555555555UL)
#define LBITSKIP00 (0x0000000000000000UL)
#endif
/*
* These routines are used by the resource group routines (rgrp.c)
* to keep track of block allocation. Each block is represented by two
* bits. So, each byte represents GFS2_NBBY (i.e. 4) blocks.
*
* 0 = Free
* 1 = Used (not metadata)
* 2 = Unlinked (still in use) inode
* 3 = Used (metadata)
*/
struct gfs2_extent {
struct gfs2_rbm rbm;
u32 len;
};
static const char valid_change[16] = {
/* current */
/* n */ 0, 1, 1, 1,
/* e */ 1, 0, 0, 0,
/* w */ 0, 0, 0, 1,
1, 0, 0, 0
};
static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext,
const struct gfs2_inode *ip, bool nowrap,
const struct gfs2_alloc_parms *ap);
/**
* gfs2_setbit - Set a bit in the bitmaps
* @rbm: The position of the bit to set
* @do_clone: Also set the clone bitmap, if it exists
* @new_state: the new state of the block
*
*/
static inline void gfs2_setbit(const struct gfs2_rbm *rbm, bool do_clone,
unsigned char new_state)
{
unsigned char *byte1, *byte2, *end, cur_state;
struct gfs2_bitmap *bi = rbm_bi(rbm);
unsigned int buflen = bi->bi_len;
const unsigned int bit = (rbm->offset % GFS2_NBBY) * GFS2_BIT_SIZE;
byte1 = bi->bi_bh->b_data + bi->bi_offset + (rbm->offset / GFS2_NBBY);
end = bi->bi_bh->b_data + bi->bi_offset + buflen;
BUG_ON(byte1 >= end);
cur_state = (*byte1 >> bit) & GFS2_BIT_MASK;
if (unlikely(!valid_change[new_state * 4 + cur_state])) {
pr_warn("buf_blk = 0x%x old_state=%d, new_state=%d\n",
rbm->offset, cur_state, new_state);
pr_warn("rgrp=0x%llx bi_start=0x%x\n",
(unsigned long long)rbm->rgd->rd_addr, bi->bi_start);
pr_warn("bi_offset=0x%x bi_len=0x%x\n",
bi->bi_offset, bi->bi_len);
dump_stack();
gfs2_consist_rgrpd(rbm->rgd);
return;
}
*byte1 ^= (cur_state ^ new_state) << bit;
if (do_clone && bi->bi_clone) {
byte2 = bi->bi_clone + bi->bi_offset + (rbm->offset / GFS2_NBBY);
cur_state = (*byte2 >> bit) & GFS2_BIT_MASK;
*byte2 ^= (cur_state ^ new_state) << bit;
}
}
/**
* gfs2_testbit - test a bit in the bitmaps
* @rbm: The bit to test
*
* Returns: The two bit block state of the requested bit
*/
static inline u8 gfs2_testbit(const struct gfs2_rbm *rbm)
{
struct gfs2_bitmap *bi = rbm_bi(rbm);
const u8 *buffer = bi->bi_bh->b_data + bi->bi_offset;
const u8 *byte;
unsigned int bit;
byte = buffer + (rbm->offset / GFS2_NBBY);
bit = (rbm->offset % GFS2_NBBY) * GFS2_BIT_SIZE;
return (*byte >> bit) & GFS2_BIT_MASK;
}
/**
* gfs2_bit_search
* @ptr: Pointer to bitmap data
* @mask: Mask to use (normally 0x55555.... but adjusted for search start)
* @state: The state we are searching for
*
* We xor the bitmap data with a patter which is the bitwise opposite
* of what we are looking for, this gives rise to a pattern of ones
* wherever there is a match. Since we have two bits per entry, we
* take this pattern, shift it down by one place and then and it with
* the original. All the even bit positions (0,2,4, etc) then represent
* successful matches, so we mask with 0x55555..... to remove the unwanted
* odd bit positions.
*
* This allows searching of a whole u64 at once (32 blocks) with a
* single test (on 64 bit arches).
*/
static inline u64 gfs2_bit_search(const __le64 *ptr, u64 mask, u8 state)
{
u64 tmp;
static const u64 search[] = {
[0] = 0xffffffffffffffffULL,
[1] = 0xaaaaaaaaaaaaaaaaULL,
[2] = 0x5555555555555555ULL,
[3] = 0x0000000000000000ULL,
};
tmp = le64_to_cpu(*ptr) ^ search[state];
tmp &= (tmp >> 1);
tmp &= mask;
return tmp;
}
/**
* rs_cmp - multi-block reservation range compare
* @blk: absolute file system block number of the new reservation
* @len: number of blocks in the new reservation
* @rs: existing reservation to compare against
*
* returns: 1 if the block range is beyond the reach of the reservation
* -1 if the block range is before the start of the reservation
* 0 if the block range overlaps with the reservation
*/
static inline int rs_cmp(u64 blk, u32 len, struct gfs2_blkreserv *rs)
{
u64 startblk = gfs2_rbm_to_block(&rs->rs_rbm);
if (blk >= startblk + rs->rs_free)
return 1;
if (blk + len - 1 < startblk)
return -1;
return 0;
}
/**
* gfs2_bitfit - Search an rgrp's bitmap buffer to find a bit-pair representing
* a block in a given allocation state.
* @buf: the buffer that holds the bitmaps
* @len: the length (in bytes) of the buffer
* @goal: start search at this block's bit-pair (within @buffer)
* @state: GFS2_BLKST_XXX the state of the block we're looking for.
*
* Scope of @goal and returned block number is only within this bitmap buffer,
* not entire rgrp or filesystem. @buffer will be offset from the actual
* beginning of a bitmap block buffer, skipping any header structures, but
* headers are always a multiple of 64 bits long so that the buffer is
* always aligned to a 64 bit boundary.
*
* The size of the buffer is in bytes, but is it assumed that it is
* always ok to read a complete multiple of 64 bits at the end
* of the block in case the end is no aligned to a natural boundary.
*
* Return: the block number (bitmap buffer scope) that was found
*/
static u32 gfs2_bitfit(const u8 *buf, const unsigned int len,
u32 goal, u8 state)
{
u32 spoint = (goal << 1) & ((8*sizeof(u64)) - 1);
const __le64 *ptr = ((__le64 *)buf) + (goal >> 5);
const __le64 *end = (__le64 *)(buf + ALIGN(len, sizeof(u64)));
u64 tmp;
u64 mask = 0x5555555555555555ULL;
u32 bit;
/* Mask off bits we don't care about at the start of the search */
mask <<= spoint;
tmp = gfs2_bit_search(ptr, mask, state);
ptr++;
while(tmp == 0 && ptr < end) {
tmp = gfs2_bit_search(ptr, 0x5555555555555555ULL, state);
ptr++;
}
/* Mask off any bits which are more than len bytes from the start */
if (ptr == end && (len & (sizeof(u64) - 1)))
tmp &= (((u64)~0) >> (64 - 8*(len & (sizeof(u64) - 1))));
/* Didn't find anything, so return */
if (tmp == 0)
return BFITNOENT;
ptr--;
bit = __ffs64(tmp);
bit /= 2; /* two bits per entry in the bitmap */
return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
}
/**
* gfs2_rbm_from_block - Set the rbm based upon rgd and block number
* @rbm: The rbm with rgd already set correctly
* @block: The block number (filesystem relative)
*
* This sets the bi and offset members of an rbm based on a
* resource group and a filesystem relative block number. The
* resource group must be set in the rbm on entry, the bi and
* offset members will be set by this function.
*
* Returns: 0 on success, or an error code
*/
static int gfs2_rbm_from_block(struct gfs2_rbm *rbm, u64 block)
{
u64 rblock = block - rbm->rgd->rd_data0;
if (WARN_ON_ONCE(rblock > UINT_MAX))
return -EINVAL;
if (block >= rbm->rgd->rd_data0 + rbm->rgd->rd_data)
return -E2BIG;
rbm->bii = 0;
GFS2: Speed up gfs2_rbm_from_block This patch is a rewrite of function gfs2_rbm_from_block. Rather than looping to find the right bitmap, the code now does a few simple math calculations. I compared the performance of both algorithms side by side and the new algorithm is noticeably faster. Sample instrumentation output from a "fast" machine: 5 million calls: millisec spent: Orig: 166 New: 113 5 million calls: millisec spent: Orig: 189 New: 114 In addition, I ran postmark (on a somewhat slowr CPU) before the after the new algorithm was put in place and postmark showed a decent improvement: Before the new algorithm: ------------------------- Time: 645 seconds total 584 seconds of transactions (171 per second) Files: 150087 created (232 per second) Creation alone: 100000 files (2083 per second) Mixed with transactions: 50087 files (85 per second) 49995 read (85 per second) 49991 appended (85 per second) 150087 deleted (232 per second) Deletion alone: 100174 files (7705 per second) Mixed with transactions: 49913 files (85 per second) Data: 273.42 megabytes read (434.08 kilobytes per second) 852.13 megabytes written (1.32 megabytes per second) With the new algorithm: ----------------------- Time: 599 seconds total 530 seconds of transactions (188 per second) Files: 150087 created (250 per second) Creation alone: 100000 files (1886 per second) Mixed with transactions: 50087 files (94 per second) 49995 read (94 per second) 49991 appended (94 per second) 150087 deleted (250 per second) Deletion alone: 100174 files (6260 per second) Mixed with transactions: 49913 files (94 per second) Data: 273.42 megabytes read (467.42 kilobytes per second) 852.13 megabytes written (1.42 megabytes per second) Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-10-19 12:32:51 +00:00
rbm->offset = (u32)(rblock);
/* Check if the block is within the first block */
if (rbm->offset < rbm_bi(rbm)->bi_blocks)
GFS2: Speed up gfs2_rbm_from_block This patch is a rewrite of function gfs2_rbm_from_block. Rather than looping to find the right bitmap, the code now does a few simple math calculations. I compared the performance of both algorithms side by side and the new algorithm is noticeably faster. Sample instrumentation output from a "fast" machine: 5 million calls: millisec spent: Orig: 166 New: 113 5 million calls: millisec spent: Orig: 189 New: 114 In addition, I ran postmark (on a somewhat slowr CPU) before the after the new algorithm was put in place and postmark showed a decent improvement: Before the new algorithm: ------------------------- Time: 645 seconds total 584 seconds of transactions (171 per second) Files: 150087 created (232 per second) Creation alone: 100000 files (2083 per second) Mixed with transactions: 50087 files (85 per second) 49995 read (85 per second) 49991 appended (85 per second) 150087 deleted (232 per second) Deletion alone: 100174 files (7705 per second) Mixed with transactions: 49913 files (85 per second) Data: 273.42 megabytes read (434.08 kilobytes per second) 852.13 megabytes written (1.32 megabytes per second) With the new algorithm: ----------------------- Time: 599 seconds total 530 seconds of transactions (188 per second) Files: 150087 created (250 per second) Creation alone: 100000 files (1886 per second) Mixed with transactions: 50087 files (94 per second) 49995 read (94 per second) 49991 appended (94 per second) 150087 deleted (250 per second) Deletion alone: 100174 files (6260 per second) Mixed with transactions: 49913 files (94 per second) Data: 273.42 megabytes read (467.42 kilobytes per second) 852.13 megabytes written (1.42 megabytes per second) Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-10-19 12:32:51 +00:00
return 0;
/* Adjust for the size diff between gfs2_meta_header and gfs2_rgrp */
rbm->offset += (sizeof(struct gfs2_rgrp) -
sizeof(struct gfs2_meta_header)) * GFS2_NBBY;
rbm->bii = rbm->offset / rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
rbm->offset -= rbm->bii * rbm->rgd->rd_sbd->sd_blocks_per_bitmap;
return 0;
}
/**
* gfs2_rbm_incr - increment an rbm structure
* @rbm: The rbm with rgd already set correctly
*
* This function takes an existing rbm structure and increments it to the next
* viable block offset.
*
* Returns: If incrementing the offset would cause the rbm to go past the
* end of the rgrp, true is returned, otherwise false.
*
*/
static bool gfs2_rbm_incr(struct gfs2_rbm *rbm)
{
if (rbm->offset + 1 < rbm_bi(rbm)->bi_blocks) { /* in the same bitmap */
rbm->offset++;
return false;
}
if (rbm->bii == rbm->rgd->rd_length - 1) /* at the last bitmap */
return true;
rbm->offset = 0;
rbm->bii++;
return false;
}
/**
* gfs2_unaligned_extlen - Look for free blocks which are not byte aligned
* @rbm: Position to search (value/result)
* @n_unaligned: Number of unaligned blocks to check
* @len: Decremented for each block found (terminate on zero)
*
* Returns: true if a non-free block is encountered
*/
static bool gfs2_unaligned_extlen(struct gfs2_rbm *rbm, u32 n_unaligned, u32 *len)
{
u32 n;
u8 res;
for (n = 0; n < n_unaligned; n++) {
res = gfs2_testbit(rbm);
if (res != GFS2_BLKST_FREE)
return true;
(*len)--;
if (*len == 0)
return true;
if (gfs2_rbm_incr(rbm))
return true;
}
return false;
}
/**
* gfs2_free_extlen - Return extent length of free blocks
* @rrbm: Starting position
* @len: Max length to check
*
* Starting at the block specified by the rbm, see how many free blocks
* there are, not reading more than len blocks ahead. This can be done
* using memchr_inv when the blocks are byte aligned, but has to be done
* on a block by block basis in case of unaligned blocks. Also this
* function can cope with bitmap boundaries (although it must stop on
* a resource group boundary)
*
* Returns: Number of free blocks in the extent
*/
static u32 gfs2_free_extlen(const struct gfs2_rbm *rrbm, u32 len)
{
struct gfs2_rbm rbm = *rrbm;
u32 n_unaligned = rbm.offset & 3;
u32 size = len;
u32 bytes;
u32 chunk_size;
u8 *ptr, *start, *end;
u64 block;
struct gfs2_bitmap *bi;
if (n_unaligned &&
gfs2_unaligned_extlen(&rbm, 4 - n_unaligned, &len))
goto out;
n_unaligned = len & 3;
/* Start is now byte aligned */
while (len > 3) {
bi = rbm_bi(&rbm);
start = bi->bi_bh->b_data;
if (bi->bi_clone)
start = bi->bi_clone;
end = start + bi->bi_bh->b_size;
start += bi->bi_offset;
BUG_ON(rbm.offset & 3);
start += (rbm.offset / GFS2_NBBY);
bytes = min_t(u32, len / GFS2_NBBY, (end - start));
ptr = memchr_inv(start, 0, bytes);
chunk_size = ((ptr == NULL) ? bytes : (ptr - start));
chunk_size *= GFS2_NBBY;
BUG_ON(len < chunk_size);
len -= chunk_size;
block = gfs2_rbm_to_block(&rbm);
if (gfs2_rbm_from_block(&rbm, block + chunk_size)) {
n_unaligned = 0;
break;
}
if (ptr) {
n_unaligned = 3;
break;
}
n_unaligned = len & 3;
}
/* Deal with any bits left over at the end */
if (n_unaligned)
gfs2_unaligned_extlen(&rbm, n_unaligned, &len);
out:
return size - len;
}
/**
* gfs2_bitcount - count the number of bits in a certain state
* @rgd: the resource group descriptor
* @buffer: the buffer that holds the bitmaps
* @buflen: the length (in bytes) of the buffer
* @state: the state of the block we're looking for
*
* Returns: The number of bits
*/
static u32 gfs2_bitcount(struct gfs2_rgrpd *rgd, const u8 *buffer,
unsigned int buflen, u8 state)
{
const u8 *byte = buffer;
const u8 *end = buffer + buflen;
const u8 state1 = state << 2;
const u8 state2 = state << 4;
const u8 state3 = state << 6;
u32 count = 0;
for (; byte < end; byte++) {
if (((*byte) & 0x03) == state)
count++;
if (((*byte) & 0x0C) == state1)
count++;
if (((*byte) & 0x30) == state2)
count++;
if (((*byte) & 0xC0) == state3)
count++;
}
return count;
}
/**
* gfs2_rgrp_verify - Verify that a resource group is consistent
* @rgd: the rgrp
*
*/
void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd)
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_bitmap *bi = NULL;
u32 length = rgd->rd_length;
u32 count[4], tmp;
int buf, x;
memset(count, 0, 4 * sizeof(u32));
/* Count # blocks in each of 4 possible allocation states */
for (buf = 0; buf < length; buf++) {
bi = rgd->rd_bits + buf;
for (x = 0; x < 4; x++)
count[x] += gfs2_bitcount(rgd,
bi->bi_bh->b_data +
bi->bi_offset,
bi->bi_len, x);
}
if (count[0] != rgd->rd_free) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "free data mismatch: %u != %u\n",
count[0], rgd->rd_free);
return;
}
tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
if (count[1] != tmp) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used data mismatch: %u != %u\n",
count[1], tmp);
return;
}
if (count[2] + count[3] != rgd->rd_dinodes) {
if (gfs2_consist_rgrpd(rgd))
fs_err(sdp, "used metadata mismatch: %u != %u\n",
count[2] + count[3], rgd->rd_dinodes);
return;
}
}
static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
{
u64 first = rgd->rd_data0;
u64 last = first + rgd->rd_data;
return first <= block && block < last;
}
/**
* gfs2_blk2rgrpd - Find resource group for a given data/meta block number
* @sdp: The GFS2 superblock
* @blk: The data block number
* @exact: True if this needs to be an exact match
*
* Returns: The resource group, or NULL if not found
*/
struct gfs2_rgrpd *gfs2_blk2rgrpd(struct gfs2_sbd *sdp, u64 blk, bool exact)
{
struct rb_node *n, *next;
struct gfs2_rgrpd *cur;
spin_lock(&sdp->sd_rindex_spin);
n = sdp->sd_rindex_tree.rb_node;
while (n) {
cur = rb_entry(n, struct gfs2_rgrpd, rd_node);
next = NULL;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
if (blk < cur->rd_addr)
next = n->rb_left;
else if (blk >= cur->rd_data0 + cur->rd_data)
next = n->rb_right;
if (next == NULL) {
spin_unlock(&sdp->sd_rindex_spin);
if (exact) {
if (blk < cur->rd_addr)
return NULL;
if (blk >= cur->rd_data0 + cur->rd_data)
return NULL;
}
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
return cur;
}
n = next;
}
spin_unlock(&sdp->sd_rindex_spin);
return NULL;
}
/**
* gfs2_rgrpd_get_first - get the first Resource Group in the filesystem
* @sdp: The GFS2 superblock
*
* Returns: The first rgrp in the filesystem
*/
struct gfs2_rgrpd *gfs2_rgrpd_get_first(struct gfs2_sbd *sdp)
{
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
const struct rb_node *n;
struct gfs2_rgrpd *rgd;
spin_lock(&sdp->sd_rindex_spin);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
n = rb_first(&sdp->sd_rindex_tree);
rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
spin_unlock(&sdp->sd_rindex_spin);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
return rgd;
}
/**
* gfs2_rgrpd_get_next - get the next RG
* @rgd: the resource group descriptor
*
* Returns: The next rgrp
*/
struct gfs2_rgrpd *gfs2_rgrpd_get_next(struct gfs2_rgrpd *rgd)
{
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
struct gfs2_sbd *sdp = rgd->rd_sbd;
const struct rb_node *n;
spin_lock(&sdp->sd_rindex_spin);
n = rb_next(&rgd->rd_node);
if (n == NULL)
n = rb_first(&sdp->sd_rindex_tree);
if (unlikely(&rgd->rd_node == n)) {
spin_unlock(&sdp->sd_rindex_spin);
return NULL;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
}
rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
spin_unlock(&sdp->sd_rindex_spin);
return rgd;
}
void check_and_update_goal(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
if (!ip->i_goal || gfs2_blk2rgrpd(sdp, ip->i_goal, 1) == NULL)
ip->i_goal = ip->i_no_addr;
}
void gfs2_free_clones(struct gfs2_rgrpd *rgd)
{
int x;
for (x = 0; x < rgd->rd_length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
kfree(bi->bi_clone);
bi->bi_clone = NULL;
}
}
/**
* gfs2_rs_alloc - make sure we have a reservation assigned to the inode
* @ip: the inode for this reservation
*/
int gfs2_rs_alloc(struct gfs2_inode *ip)
{
int error = 0;
down_write(&ip->i_rw_mutex);
if (ip->i_res)
goto out;
ip->i_res = kmem_cache_zalloc(gfs2_rsrv_cachep, GFP_NOFS);
if (!ip->i_res) {
error = -ENOMEM;
goto out;
}
RB_CLEAR_NODE(&ip->i_res->rs_node);
out:
up_write(&ip->i_rw_mutex);
return error;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
{
gfs2_print_dbg(seq, " B: n:%llu s:%llu b:%u f:%u\n",
(unsigned long long)rs->rs_inum,
(unsigned long long)gfs2_rbm_to_block(&rs->rs_rbm),
rs->rs_rbm.offset, rs->rs_free);
}
/**
* __rs_deltree - remove a multi-block reservation from the rgd tree
* @rs: The reservation to remove
*
*/
static void __rs_deltree(struct gfs2_blkreserv *rs)
{
struct gfs2_rgrpd *rgd;
if (!gfs2_rs_active(rs))
return;
rgd = rs->rs_rbm.rgd;
trace_gfs2_rs(rs, TRACE_RS_TREEDEL);
rb_erase(&rs->rs_node, &rgd->rd_rstree);
RB_CLEAR_NODE(&rs->rs_node);
if (rs->rs_free) {
struct gfs2_bitmap *bi = rbm_bi(&rs->rs_rbm);
/* return reserved blocks to the rgrp */
BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free);
rs->rs_rbm.rgd->rd_reserved -= rs->rs_free;
/* The rgrp extent failure point is likely not to increase;
it will only do so if the freed blocks are somehow
contiguous with a span of free blocks that follows. Still,
it will force the number to be recalculated later. */
rgd->rd_extfail_pt += rs->rs_free;
rs->rs_free = 0;
clear_bit(GBF_FULL, &bi->bi_flags);
}
}
/**
* gfs2_rs_deltree - remove a multi-block reservation from the rgd tree
* @rs: The reservation to remove
*
*/
void gfs2_rs_deltree(struct gfs2_blkreserv *rs)
{
struct gfs2_rgrpd *rgd;
rgd = rs->rs_rbm.rgd;
if (rgd) {
spin_lock(&rgd->rd_rsspin);
__rs_deltree(rs);
spin_unlock(&rgd->rd_rsspin);
}
}
/**
* gfs2_rs_delete - delete a multi-block reservation
* @ip: The inode for this reservation
* @wcount: The inode's write count, or NULL
*
*/
void gfs2_rs_delete(struct gfs2_inode *ip, atomic_t *wcount)
{
down_write(&ip->i_rw_mutex);
if (ip->i_res && ((wcount == NULL) || (atomic_read(wcount) <= 1))) {
gfs2_rs_deltree(ip->i_res);
BUG_ON(ip->i_res->rs_free);
kmem_cache_free(gfs2_rsrv_cachep, ip->i_res);
ip->i_res = NULL;
}
up_write(&ip->i_rw_mutex);
}
/**
* return_all_reservations - return all reserved blocks back to the rgrp.
* @rgd: the rgrp that needs its space back
*
* We previously reserved a bunch of blocks for allocation. Now we need to
* give them back. This leave the reservation structures in tact, but removes
* all of their corresponding "no-fly zones".
*/
static void return_all_reservations(struct gfs2_rgrpd *rgd)
{
struct rb_node *n;
struct gfs2_blkreserv *rs;
spin_lock(&rgd->rd_rsspin);
while ((n = rb_first(&rgd->rd_rstree))) {
rs = rb_entry(n, struct gfs2_blkreserv, rs_node);
__rs_deltree(rs);
}
spin_unlock(&rgd->rd_rsspin);
}
void gfs2_clear_rgrpd(struct gfs2_sbd *sdp)
{
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
struct rb_node *n;
struct gfs2_rgrpd *rgd;
struct gfs2_glock *gl;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
while ((n = rb_first(&sdp->sd_rindex_tree))) {
rgd = rb_entry(n, struct gfs2_rgrpd, rd_node);
gl = rgd->rd_gl;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
rb_erase(n, &sdp->sd_rindex_tree);
if (gl) {
spin_lock(&gl->gl_spin);
gl->gl_object = NULL;
spin_unlock(&gl->gl_spin);
gfs2_glock_add_to_lru(gl);
gfs2_glock_put(gl);
}
gfs2_free_clones(rgd);
kfree(rgd->rd_bits);
return_all_reservations(rgd);
kmem_cache_free(gfs2_rgrpd_cachep, rgd);
}
}
static void gfs2_rindex_print(const struct gfs2_rgrpd *rgd)
{
pr_info("ri_addr = %llu\n", (unsigned long long)rgd->rd_addr);
pr_info("ri_length = %u\n", rgd->rd_length);
pr_info("ri_data0 = %llu\n", (unsigned long long)rgd->rd_data0);
pr_info("ri_data = %u\n", rgd->rd_data);
pr_info("ri_bitbytes = %u\n", rgd->rd_bitbytes);
}
/**
* gfs2_compute_bitstructs - Compute the bitmap sizes
* @rgd: The resource group descriptor
*
* Calculates bitmap descriptors, one for each block that contains bitmap data
*
* Returns: errno
*/
static int compute_bitstructs(struct gfs2_rgrpd *rgd)
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_bitmap *bi;
u32 length = rgd->rd_length; /* # blocks in hdr & bitmap */
u32 bytes_left, bytes;
int x;
if (!length)
return -EINVAL;
rgd->rd_bits = kcalloc(length, sizeof(struct gfs2_bitmap), GFP_NOFS);
if (!rgd->rd_bits)
return -ENOMEM;
bytes_left = rgd->rd_bitbytes;
for (x = 0; x < length; x++) {
bi = rgd->rd_bits + x;
bi->bi_flags = 0;
/* small rgrp; bitmap stored completely in header block */
if (length == 1) {
bytes = bytes_left;
bi->bi_offset = sizeof(struct gfs2_rgrp);
bi->bi_start = 0;
bi->bi_len = bytes;
bi->bi_blocks = bytes * GFS2_NBBY;
/* header block */
} else if (x == 0) {
bytes = sdp->sd_sb.sb_bsize - sizeof(struct gfs2_rgrp);
bi->bi_offset = sizeof(struct gfs2_rgrp);
bi->bi_start = 0;
bi->bi_len = bytes;
bi->bi_blocks = bytes * GFS2_NBBY;
/* last block */
} else if (x + 1 == length) {
bytes = bytes_left;
bi->bi_offset = sizeof(struct gfs2_meta_header);
bi->bi_start = rgd->rd_bitbytes - bytes_left;
bi->bi_len = bytes;
bi->bi_blocks = bytes * GFS2_NBBY;
/* other blocks */
} else {
bytes = sdp->sd_sb.sb_bsize -
sizeof(struct gfs2_meta_header);
bi->bi_offset = sizeof(struct gfs2_meta_header);
bi->bi_start = rgd->rd_bitbytes - bytes_left;
bi->bi_len = bytes;
bi->bi_blocks = bytes * GFS2_NBBY;
}
bytes_left -= bytes;
}
if (bytes_left) {
gfs2_consist_rgrpd(rgd);
return -EIO;
}
bi = rgd->rd_bits + (length - 1);
if ((bi->bi_start + bi->bi_len) * GFS2_NBBY != rgd->rd_data) {
if (gfs2_consist_rgrpd(rgd)) {
gfs2_rindex_print(rgd);
fs_err(sdp, "start=%u len=%u offset=%u\n",
bi->bi_start, bi->bi_len, bi->bi_offset);
}
return -EIO;
}
return 0;
}
[GFS2] kernel changes to support new gfs2_grow command This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-09 14:37:57 +00:00
/**
* gfs2_ri_total - Total up the file system space, according to the rindex.
* @sdp: the filesystem
[GFS2] kernel changes to support new gfs2_grow command This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-09 14:37:57 +00:00
*
*/
u64 gfs2_ri_total(struct gfs2_sbd *sdp)
{
u64 total_data = 0;
struct inode *inode = sdp->sd_rindex;
struct gfs2_inode *ip = GFS2_I(inode);
char buf[sizeof(struct gfs2_rindex)];
int error, rgrps;
for (rgrps = 0;; rgrps++) {
loff_t pos = rgrps * sizeof(struct gfs2_rindex);
if (pos + sizeof(struct gfs2_rindex) > i_size_read(inode))
[GFS2] kernel changes to support new gfs2_grow command This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-09 14:37:57 +00:00
break;
error = gfs2_internal_read(ip, buf, &pos,
[GFS2] kernel changes to support new gfs2_grow command This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-09 14:37:57 +00:00
sizeof(struct gfs2_rindex));
if (error != sizeof(struct gfs2_rindex))
break;
total_data += be32_to_cpu(((struct gfs2_rindex *)buf)->ri_data);
[GFS2] kernel changes to support new gfs2_grow command This is another revision of my gfs2 kernel patch that allows gfs2_grow to function properly. Steve Whitehouse expressed some concerns about the previous patch and I restructured it based on his comments. The previous patch was doing the statfs_change at file close time, under its own transaction. The current patch does the statfs_change inside the gfs2_commit_write function, which keeps it under the umbrella of the inode transaction. I can't call ri_update to re-read the rindex file during the transaction because the transaction may have outstanding unwritten buffers attached to the rgrps that would be otherwise blown away. So instead, I created a new function, gfs2_ri_total, that will re-read the rindex file just to total the file system space for the sake of the statfs_change. The ri_update will happen later, when gfs2 realizes the version number has changed, as it happened before my patch. Since the statfs_change is happening at write_commit time and there may be multiple writes to the rindex file for one grow operation. So one consequence of this restructuring is that instead of getting one kernel message to indicate the change, you may see several. For example, before when you did a gfs2_grow, you'd get a single message like: GFS2: File system extended by 247876 blocks (968MB) Now you get something like: GFS2: File system extended by 207896 blocks (812MB) GFS2: File system extended by 39980 blocks (156MB) This version has also been successfully run against the hours-long "gfs2_fsck_hellfire" test that does several gfs2_grow and gfs2_fsck while interjecting file system damage. It does this repeatedly under a variety Resource Group conditions. Signed-off-By: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-09 14:37:57 +00:00
}
return total_data;
}
static int rgd_insert(struct gfs2_rgrpd *rgd)
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct rb_node **newn = &sdp->sd_rindex_tree.rb_node, *parent = NULL;
/* Figure out where to put new node */
while (*newn) {
struct gfs2_rgrpd *cur = rb_entry(*newn, struct gfs2_rgrpd,
rd_node);
parent = *newn;
if (rgd->rd_addr < cur->rd_addr)
newn = &((*newn)->rb_left);
else if (rgd->rd_addr > cur->rd_addr)
newn = &((*newn)->rb_right);
else
return -EEXIST;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
}
rb_link_node(&rgd->rd_node, parent, newn);
rb_insert_color(&rgd->rd_node, &sdp->sd_rindex_tree);
sdp->sd_rgrps++;
return 0;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
}
/**
* read_rindex_entry - Pull in a new resource index entry from the disk
* @ip: Pointer to the rindex inode
*
* Returns: 0 on success, > 0 on EOF, error code otherwise
*/
static int read_rindex_entry(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
const unsigned bsize = sdp->sd_sb.sb_bsize;
loff_t pos = sdp->sd_rgrps * sizeof(struct gfs2_rindex);
struct gfs2_rindex buf;
int error;
struct gfs2_rgrpd *rgd;
if (pos >= i_size_read(&ip->i_inode))
return 1;
error = gfs2_internal_read(ip, (char *)&buf, &pos,
sizeof(struct gfs2_rindex));
if (error != sizeof(struct gfs2_rindex))
return (error == 0) ? 1 : error;
rgd = kmem_cache_zalloc(gfs2_rgrpd_cachep, GFP_NOFS);
error = -ENOMEM;
if (!rgd)
return error;
rgd->rd_sbd = sdp;
rgd->rd_addr = be64_to_cpu(buf.ri_addr);
rgd->rd_length = be32_to_cpu(buf.ri_length);
rgd->rd_data0 = be64_to_cpu(buf.ri_data0);
rgd->rd_data = be32_to_cpu(buf.ri_data);
rgd->rd_bitbytes = be32_to_cpu(buf.ri_bitbytes);
spin_lock_init(&rgd->rd_rsspin);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
error = compute_bitstructs(rgd);
if (error)
goto fail;
error = gfs2_glock_get(sdp, rgd->rd_addr,
&gfs2_rgrp_glops, CREATE, &rgd->rd_gl);
if (error)
goto fail;
rgd->rd_gl->gl_object = rgd;
rgd->rd_gl->gl_vm.start = rgd->rd_addr * bsize;
rgd->rd_gl->gl_vm.end = rgd->rd_gl->gl_vm.start + (rgd->rd_length * bsize) - 1;
rgd->rd_rgl = (struct gfs2_rgrp_lvb *)rgd->rd_gl->gl_lksb.sb_lvbptr;
rgd->rd_flags &= ~(GFS2_RDF_UPTODATE | GFS2_RDF_PREFERRED);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
if (rgd->rd_data > sdp->sd_max_rg_data)
sdp->sd_max_rg_data = rgd->rd_data;
spin_lock(&sdp->sd_rindex_spin);
error = rgd_insert(rgd);
spin_unlock(&sdp->sd_rindex_spin);
if (!error)
return 0;
error = 0; /* someone else read in the rgrp; free it and ignore it */
gfs2_glock_put(rgd->rd_gl);
fail:
kfree(rgd->rd_bits);
kmem_cache_free(gfs2_rgrpd_cachep, rgd);
return error;
}
/**
* set_rgrp_preferences - Run all the rgrps, selecting some we prefer to use
* @sdp: the GFS2 superblock
*
* The purpose of this function is to select a subset of the resource groups
* and mark them as PREFERRED. We do it in such a way that each node prefers
* to use a unique set of rgrps to minimize glock contention.
*/
static void set_rgrp_preferences(struct gfs2_sbd *sdp)
{
struct gfs2_rgrpd *rgd, *first;
int i;
/* Skip an initial number of rgrps, based on this node's journal ID.
That should start each node out on its own set. */
rgd = gfs2_rgrpd_get_first(sdp);
for (i = 0; i < sdp->sd_lockstruct.ls_jid; i++)
rgd = gfs2_rgrpd_get_next(rgd);
first = rgd;
do {
rgd->rd_flags |= GFS2_RDF_PREFERRED;
for (i = 0; i < sdp->sd_journals; i++) {
rgd = gfs2_rgrpd_get_next(rgd);
if (!rgd || rgd == first)
break;
}
} while (rgd && rgd != first);
}
/**
* gfs2_ri_update - Pull in a new resource index from the disk
* @ip: pointer to the rindex inode
*
* Returns: 0 on successful update, error code otherwise
*/
static int gfs2_ri_update(struct gfs2_inode *ip)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
int error;
do {
error = read_rindex_entry(ip);
} while (error == 0);
if (error < 0)
return error;
set_rgrp_preferences(sdp);
sdp->sd_rindex_uptodate = 1;
return 0;
}
/**
* gfs2_rindex_update - Update the rindex if required
* @sdp: The GFS2 superblock
*
* We grab a lock on the rindex inode to make sure that it doesn't
* change whilst we are performing an operation. We keep this lock
* for quite long periods of time compared to other locks. This
* doesn't matter, since it is shared and it is very, very rarely
* accessed in the exclusive mode (i.e. only when expanding the filesystem).
*
* This makes sure that we're using the latest copy of the resource index
* special file, which might have been updated if someone expanded the
* filesystem (via gfs2_grow utility), which adds new resource groups.
*
* Returns: 0 on succeess, error code otherwise
*/
int gfs2_rindex_update(struct gfs2_sbd *sdp)
{
struct gfs2_inode *ip = GFS2_I(sdp->sd_rindex);
struct gfs2_glock *gl = ip->i_gl;
struct gfs2_holder ri_gh;
int error = 0;
int unlock_required = 0;
/* Read new copy from disk if we don't have the latest */
if (!sdp->sd_rindex_uptodate) {
if (!gfs2_glock_is_locked_by_me(gl)) {
error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
if (error)
return error;
unlock_required = 1;
}
if (!sdp->sd_rindex_uptodate)
error = gfs2_ri_update(ip);
if (unlock_required)
gfs2_glock_dq_uninit(&ri_gh);
}
return error;
}
static void gfs2_rgrp_in(struct gfs2_rgrpd *rgd, const void *buf)
{
const struct gfs2_rgrp *str = buf;
u32 rg_flags;
rg_flags = be32_to_cpu(str->rg_flags);
rg_flags &= ~GFS2_RDF_MASK;
rgd->rd_flags &= GFS2_RDF_MASK;
rgd->rd_flags |= rg_flags;
rgd->rd_free = be32_to_cpu(str->rg_free);
rgd->rd_dinodes = be32_to_cpu(str->rg_dinodes);
rgd->rd_igeneration = be64_to_cpu(str->rg_igeneration);
}
static void gfs2_rgrp_out(struct gfs2_rgrpd *rgd, void *buf)
{
struct gfs2_rgrp *str = buf;
str->rg_flags = cpu_to_be32(rgd->rd_flags & ~GFS2_RDF_MASK);
str->rg_free = cpu_to_be32(rgd->rd_free);
str->rg_dinodes = cpu_to_be32(rgd->rd_dinodes);
str->__pad = cpu_to_be32(0);
str->rg_igeneration = cpu_to_be64(rgd->rd_igeneration);
memset(&str->rg_reserved, 0, sizeof(str->rg_reserved));
}
static int gfs2_rgrp_lvb_valid(struct gfs2_rgrpd *rgd)
{
struct gfs2_rgrp_lvb *rgl = rgd->rd_rgl;
struct gfs2_rgrp *str = (struct gfs2_rgrp *)rgd->rd_bits[0].bi_bh->b_data;
if (rgl->rl_flags != str->rg_flags || rgl->rl_free != str->rg_free ||
rgl->rl_dinodes != str->rg_dinodes ||
rgl->rl_igeneration != str->rg_igeneration)
return 0;
return 1;
}
static void gfs2_rgrp_ondisk2lvb(struct gfs2_rgrp_lvb *rgl, const void *buf)
{
const struct gfs2_rgrp *str = buf;
rgl->rl_magic = cpu_to_be32(GFS2_MAGIC);
rgl->rl_flags = str->rg_flags;
rgl->rl_free = str->rg_free;
rgl->rl_dinodes = str->rg_dinodes;
rgl->rl_igeneration = str->rg_igeneration;
rgl->__pad = 0UL;
}
static void update_rgrp_lvb_unlinked(struct gfs2_rgrpd *rgd, u32 change)
{
struct gfs2_rgrp_lvb *rgl = rgd->rd_rgl;
u32 unlinked = be32_to_cpu(rgl->rl_unlinked) + change;
rgl->rl_unlinked = cpu_to_be32(unlinked);
}
static u32 count_unlinked(struct gfs2_rgrpd *rgd)
{
struct gfs2_bitmap *bi;
const u32 length = rgd->rd_length;
const u8 *buffer = NULL;
u32 i, goal, count = 0;
for (i = 0, bi = rgd->rd_bits; i < length; i++, bi++) {
goal = 0;
buffer = bi->bi_bh->b_data + bi->bi_offset;
WARN_ON(!buffer_uptodate(bi->bi_bh));
while (goal < bi->bi_len * GFS2_NBBY) {
goal = gfs2_bitfit(buffer, bi->bi_len, goal,
GFS2_BLKST_UNLINKED);
if (goal == BFITNOENT)
break;
count++;
goal++;
}
}
return count;
}
/**
* gfs2_rgrp_bh_get - Read in a RG's header and bitmaps
* @rgd: the struct gfs2_rgrpd describing the RG to read in
*
* Read in all of a Resource Group's header and bitmap blocks.
* Caller must eventually call gfs2_rgrp_relse() to free the bitmaps.
*
* Returns: errno
*/
static int gfs2_rgrp_bh_get(struct gfs2_rgrpd *rgd)
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_glock *gl = rgd->rd_gl;
unsigned int length = rgd->rd_length;
struct gfs2_bitmap *bi;
unsigned int x, y;
int error;
if (rgd->rd_bits[0].bi_bh != NULL)
return 0;
for (x = 0; x < length; x++) {
bi = rgd->rd_bits + x;
error = gfs2_meta_read(gl, rgd->rd_addr + x, 0, &bi->bi_bh);
if (error)
goto fail;
}
for (y = length; y--;) {
bi = rgd->rd_bits + y;
error = gfs2_meta_wait(sdp, bi->bi_bh);
if (error)
goto fail;
if (gfs2_metatype_check(sdp, bi->bi_bh, y ? GFS2_METATYPE_RB :
GFS2_METATYPE_RG)) {
error = -EIO;
goto fail;
}
}
if (!(rgd->rd_flags & GFS2_RDF_UPTODATE)) {
for (x = 0; x < length; x++)
clear_bit(GBF_FULL, &rgd->rd_bits[x].bi_flags);
gfs2_rgrp_in(rgd, (rgd->rd_bits[0].bi_bh)->b_data);
rgd->rd_flags |= (GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
rgd->rd_free_clone = rgd->rd_free;
/* max out the rgrp allocation failure point */
rgd->rd_extfail_pt = rgd->rd_free;
}
if (cpu_to_be32(GFS2_MAGIC) != rgd->rd_rgl->rl_magic) {
rgd->rd_rgl->rl_unlinked = cpu_to_be32(count_unlinked(rgd));
gfs2_rgrp_ondisk2lvb(rgd->rd_rgl,
rgd->rd_bits[0].bi_bh->b_data);
}
else if (sdp->sd_args.ar_rgrplvb) {
if (!gfs2_rgrp_lvb_valid(rgd)){
gfs2_consist_rgrpd(rgd);
error = -EIO;
goto fail;
}
if (rgd->rd_rgl->rl_unlinked == 0)
rgd->rd_flags &= ~GFS2_RDF_CHECK;
}
return 0;
fail:
while (x--) {
bi = rgd->rd_bits + x;
brelse(bi->bi_bh);
bi->bi_bh = NULL;
gfs2_assert_warn(sdp, !bi->bi_clone);
}
return error;
}
static int update_rgrp_lvb(struct gfs2_rgrpd *rgd)
{
u32 rl_flags;
if (rgd->rd_flags & GFS2_RDF_UPTODATE)
return 0;
if (cpu_to_be32(GFS2_MAGIC) != rgd->rd_rgl->rl_magic)
return gfs2_rgrp_bh_get(rgd);
rl_flags = be32_to_cpu(rgd->rd_rgl->rl_flags);
rl_flags &= ~GFS2_RDF_MASK;
rgd->rd_flags &= GFS2_RDF_MASK;
rgd->rd_flags |= (rl_flags | GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
if (rgd->rd_rgl->rl_unlinked == 0)
rgd->rd_flags &= ~GFS2_RDF_CHECK;
rgd->rd_free = be32_to_cpu(rgd->rd_rgl->rl_free);
rgd->rd_free_clone = rgd->rd_free;
rgd->rd_dinodes = be32_to_cpu(rgd->rd_rgl->rl_dinodes);
rgd->rd_igeneration = be64_to_cpu(rgd->rd_rgl->rl_igeneration);
return 0;
}
int gfs2_rgrp_go_lock(struct gfs2_holder *gh)
{
struct gfs2_rgrpd *rgd = gh->gh_gl->gl_object;
struct gfs2_sbd *sdp = rgd->rd_sbd;
if (gh->gh_flags & GL_SKIP && sdp->sd_args.ar_rgrplvb)
return 0;
return gfs2_rgrp_bh_get(rgd);
}
/**
* gfs2_rgrp_brelse - Release RG bitmaps read in with gfs2_rgrp_bh_get()
* @rgd: The resource group
*
*/
void gfs2_rgrp_brelse(struct gfs2_rgrpd *rgd)
{
int x, length = rgd->rd_length;
for (x = 0; x < length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
if (bi->bi_bh) {
brelse(bi->bi_bh);
bi->bi_bh = NULL;
}
}
}
/**
* gfs2_rgrp_go_unlock - Unlock a rgrp glock
* @gh: The glock holder for the resource group
*
*/
void gfs2_rgrp_go_unlock(struct gfs2_holder *gh)
{
struct gfs2_rgrpd *rgd = gh->gh_gl->gl_object;
int demote_requested = test_bit(GLF_DEMOTE, &gh->gh_gl->gl_flags) |
test_bit(GLF_PENDING_DEMOTE, &gh->gh_gl->gl_flags);
if (rgd && demote_requested)
gfs2_rgrp_brelse(rgd);
}
int gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
struct buffer_head *bh,
const struct gfs2_bitmap *bi, unsigned minlen, u64 *ptrimmed)
{
struct super_block *sb = sdp->sd_vfs;
u64 blk;
sector_t start = 0;
sector_t nr_blks = 0;
int rv;
unsigned int x;
u32 trimmed = 0;
u8 diff;
for (x = 0; x < bi->bi_len; x++) {
const u8 *clone = bi->bi_clone ? bi->bi_clone : bi->bi_bh->b_data;
clone += bi->bi_offset;
clone += x;
if (bh) {
const u8 *orig = bh->b_data + bi->bi_offset + x;
diff = ~(*orig | (*orig >> 1)) & (*clone | (*clone >> 1));
} else {
diff = ~(*clone | (*clone >> 1));
}
diff &= 0x55;
if (diff == 0)
continue;
blk = offset + ((bi->bi_start + x) * GFS2_NBBY);
while(diff) {
if (diff & 1) {
if (nr_blks == 0)
goto start_new_extent;
if ((start + nr_blks) != blk) {
if (nr_blks >= minlen) {
rv = sb_issue_discard(sb,
start, nr_blks,
GFP_NOFS, 0);
if (rv)
goto fail;
trimmed += nr_blks;
}
nr_blks = 0;
start_new_extent:
start = blk;
}
nr_blks++;
}
diff >>= 2;
blk++;
}
}
if (nr_blks >= minlen) {
rv = sb_issue_discard(sb, start, nr_blks, GFP_NOFS, 0);
if (rv)
goto fail;
trimmed += nr_blks;
}
if (ptrimmed)
*ptrimmed = trimmed;
return 0;
fail:
if (sdp->sd_args.ar_discard)
fs_warn(sdp, "error %d on discard request, turning discards off for this filesystem", rv);
sdp->sd_args.ar_discard = 0;
return -EIO;
}
/**
* gfs2_fitrim - Generate discard requests for unused bits of the filesystem
* @filp: Any file on the filesystem
* @argp: Pointer to the arguments (also used to pass result)
*
* Returns: 0 on success, otherwise error code
*/
int gfs2_fitrim(struct file *filp, void __user *argp)
{
struct inode *inode = file_inode(filp);
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct request_queue *q = bdev_get_queue(sdp->sd_vfs->s_bdev);
struct buffer_head *bh;
struct gfs2_rgrpd *rgd;
struct gfs2_rgrpd *rgd_end;
struct gfs2_holder gh;
struct fstrim_range r;
int ret = 0;
u64 amt;
u64 trimmed = 0;
u64 start, end, minlen;
unsigned int x;
unsigned bs_shift = sdp->sd_sb.sb_bsize_shift;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
if (copy_from_user(&r, argp, sizeof(r)))
return -EFAULT;
ret = gfs2_rindex_update(sdp);
if (ret)
return ret;
start = r.start >> bs_shift;
end = start + (r.len >> bs_shift);
minlen = max_t(u64, r.minlen,
q->limits.discard_granularity) >> bs_shift;
if (end <= start || minlen > sdp->sd_max_rg_data)
return -EINVAL;
rgd = gfs2_blk2rgrpd(sdp, start, 0);
rgd_end = gfs2_blk2rgrpd(sdp, end, 0);
if ((gfs2_rgrpd_get_first(sdp) == gfs2_rgrpd_get_next(rgd_end))
&& (start > rgd_end->rd_data0 + rgd_end->rd_data))
return -EINVAL; /* start is beyond the end of the fs */
while (1) {
ret = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, &gh);
if (ret)
goto out;
if (!(rgd->rd_flags & GFS2_RGF_TRIMMED)) {
/* Trim each bitmap in the rgrp */
for (x = 0; x < rgd->rd_length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
ret = gfs2_rgrp_send_discards(sdp,
rgd->rd_data0, NULL, bi, minlen,
&amt);
if (ret) {
gfs2_glock_dq_uninit(&gh);
goto out;
}
trimmed += amt;
}
/* Mark rgrp as having been trimmed */
ret = gfs2_trans_begin(sdp, RES_RG_HDR, 0);
if (ret == 0) {
bh = rgd->rd_bits[0].bi_bh;
rgd->rd_flags |= GFS2_RGF_TRIMMED;
gfs2_trans_add_meta(rgd->rd_gl, bh);
gfs2_rgrp_out(rgd, bh->b_data);
gfs2_rgrp_ondisk2lvb(rgd->rd_rgl, bh->b_data);
gfs2_trans_end(sdp);
}
}
gfs2_glock_dq_uninit(&gh);
if (rgd == rgd_end)
break;
rgd = gfs2_rgrpd_get_next(rgd);
}
out:
r.len = trimmed << bs_shift;
if (copy_to_user(argp, &r, sizeof(r)))
return -EFAULT;
return ret;
}
/**
* rs_insert - insert a new multi-block reservation into the rgrp's rb_tree
* @ip: the inode structure
*
*/
static void rs_insert(struct gfs2_inode *ip)
{
struct rb_node **newn, *parent = NULL;
int rc;
struct gfs2_blkreserv *rs = ip->i_res;
struct gfs2_rgrpd *rgd = rs->rs_rbm.rgd;
u64 fsblock = gfs2_rbm_to_block(&rs->rs_rbm);
BUG_ON(gfs2_rs_active(rs));
spin_lock(&rgd->rd_rsspin);
newn = &rgd->rd_rstree.rb_node;
while (*newn) {
struct gfs2_blkreserv *cur =
rb_entry(*newn, struct gfs2_blkreserv, rs_node);
parent = *newn;
rc = rs_cmp(fsblock, rs->rs_free, cur);
if (rc > 0)
newn = &((*newn)->rb_right);
else if (rc < 0)
newn = &((*newn)->rb_left);
else {
spin_unlock(&rgd->rd_rsspin);
WARN_ON(1);
return;
}
}
rb_link_node(&rs->rs_node, parent, newn);
rb_insert_color(&rs->rs_node, &rgd->rd_rstree);
/* Do our rgrp accounting for the reservation */
rgd->rd_reserved += rs->rs_free; /* blocks reserved */
spin_unlock(&rgd->rd_rsspin);
trace_gfs2_rs(rs, TRACE_RS_INSERT);
}
/**
* rg_mblk_search - find a group of multiple free blocks to form a reservation
* @rgd: the resource group descriptor
* @ip: pointer to the inode for which we're reserving blocks
* @ap: the allocation parameters
*
*/
static void rg_mblk_search(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip,
const struct gfs2_alloc_parms *ap)
{
struct gfs2_rbm rbm = { .rgd = rgd, };
u64 goal;
struct gfs2_blkreserv *rs = ip->i_res;
u32 extlen;
u32 free_blocks = rgd->rd_free_clone - rgd->rd_reserved;
int ret;
struct inode *inode = &ip->i_inode;
if (S_ISDIR(inode->i_mode))
extlen = 1;
else {
extlen = max_t(u32, atomic_read(&rs->rs_sizehint), ap->target);
extlen = clamp(extlen, RGRP_RSRV_MINBLKS, free_blocks);
}
if ((rgd->rd_free_clone < rgd->rd_reserved) || (free_blocks < extlen))
return;
/* Find bitmap block that contains bits for goal block */
if (rgrp_contains_block(rgd, ip->i_goal))
goal = ip->i_goal;
else
goal = rgd->rd_last_alloc + rgd->rd_data0;
if (WARN_ON(gfs2_rbm_from_block(&rbm, goal)))
return;
ret = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, &extlen, ip, true, ap);
if (ret == 0) {
rs->rs_rbm = rbm;
rs->rs_free = extlen;
rs->rs_inum = ip->i_no_addr;
rs_insert(ip);
} else {
if (goal == rgd->rd_last_alloc + rgd->rd_data0)
rgd->rd_last_alloc = 0;
}
}
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
/**
* gfs2_next_unreserved_block - Return next block that is not reserved
* @rgd: The resource group
* @block: The starting block
* @length: The required length
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
* @ip: Ignore any reservations for this inode
*
* If the block does not appear in any reservation, then return the
* block number unchanged. If it does appear in the reservation, then
* keep looking through the tree of reservations in order to find the
* first block number which is not reserved.
*/
static u64 gfs2_next_unreserved_block(struct gfs2_rgrpd *rgd, u64 block,
u32 length,
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
const struct gfs2_inode *ip)
{
struct gfs2_blkreserv *rs;
struct rb_node *n;
int rc;
spin_lock(&rgd->rd_rsspin);
n = rgd->rd_rstree.rb_node;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
while (n) {
rs = rb_entry(n, struct gfs2_blkreserv, rs_node);
rc = rs_cmp(block, length, rs);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (rc < 0)
n = n->rb_left;
else if (rc > 0)
n = n->rb_right;
else
break;
}
if (n) {
while ((rs_cmp(block, length, rs) == 0) && (ip->i_res != rs)) {
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
block = gfs2_rbm_to_block(&rs->rs_rbm) + rs->rs_free;
n = n->rb_right;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (n == NULL)
break;
rs = rb_entry(n, struct gfs2_blkreserv, rs_node);
}
}
spin_unlock(&rgd->rd_rsspin);
return block;
}
/**
* gfs2_reservation_check_and_update - Check for reservations during block alloc
* @rbm: The current position in the resource group
* @ip: The inode for which we are searching for blocks
* @minext: The minimum extent length
* @maxext: A pointer to the maximum extent structure
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
*
* This checks the current position in the rgrp to see whether there is
* a reservation covering this block. If not then this function is a
* no-op. If there is, then the position is moved to the end of the
* contiguous reservation(s) so that we are pointing at the first
* non-reserved block.
*
* Returns: 0 if no reservation, 1 if @rbm has changed, otherwise an error
*/
static int gfs2_reservation_check_and_update(struct gfs2_rbm *rbm,
const struct gfs2_inode *ip,
u32 minext,
struct gfs2_extent *maxext)
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
{
u64 block = gfs2_rbm_to_block(rbm);
u32 extlen = 1;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
u64 nblock;
int ret;
/*
* If we have a minimum extent length, then skip over any extent
* which is less than the min extent length in size.
*/
if (minext) {
extlen = gfs2_free_extlen(rbm, minext);
if (extlen <= maxext->len)
goto fail;
}
/*
* Check the extent which has been found against the reservations
* and skip if parts of it are already reserved
*/
nblock = gfs2_next_unreserved_block(rbm->rgd, block, extlen, ip);
if (nblock == block) {
if (!minext || extlen >= minext)
return 0;
if (extlen > maxext->len) {
maxext->len = extlen;
maxext->rbm = *rbm;
}
fail:
nblock = block + extlen;
}
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
ret = gfs2_rbm_from_block(rbm, nblock);
if (ret < 0)
return ret;
return 1;
}
/**
* gfs2_rbm_find - Look for blocks of a particular state
* @rbm: Value/result starting position and final position
* @state: The state which we want to find
* @minext: Pointer to the requested extent length (NULL for a single block)
* This is updated to be the actual reservation size.
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
* @ip: If set, check for reservations
* @nowrap: Stop looking at the end of the rgrp, rather than wrapping
* around until we've reached the starting point.
* @ap: the allocation parameters
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
*
* Side effects:
* - If looking for free blocks, we set GBF_FULL on each bitmap which
* has no free blocks in it.
* - If looking for free blocks, we set rd_extfail_pt on each rgrp which
* has come up short on a free block search.
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
*
* Returns: 0 on success, -ENOSPC if there is no block of the requested state
*/
static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext,
const struct gfs2_inode *ip, bool nowrap,
const struct gfs2_alloc_parms *ap)
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
{
struct buffer_head *bh;
int initial_bii;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
u32 initial_offset;
int first_bii = rbm->bii;
u32 first_offset = rbm->offset;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
u32 offset;
u8 *buffer;
int n = 0;
int iters = rbm->rgd->rd_length;
int ret;
struct gfs2_bitmap *bi;
struct gfs2_extent maxext = { .rbm.rgd = rbm->rgd, };
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
/* If we are not starting at the beginning of a bitmap, then we
* need to add one to the bitmap count to ensure that we search
* the starting bitmap twice.
*/
if (rbm->offset != 0)
iters++;
while(1) {
bi = rbm_bi(rbm);
if (test_bit(GBF_FULL, &bi->bi_flags) &&
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
(state == GFS2_BLKST_FREE))
goto next_bitmap;
bh = bi->bi_bh;
buffer = bh->b_data + bi->bi_offset;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
WARN_ON(!buffer_uptodate(bh));
if (state != GFS2_BLKST_UNLINKED && bi->bi_clone)
buffer = bi->bi_clone + bi->bi_offset;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
initial_offset = rbm->offset;
offset = gfs2_bitfit(buffer, bi->bi_len, rbm->offset, state);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (offset == BFITNOENT)
goto bitmap_full;
rbm->offset = offset;
if (ip == NULL)
return 0;
initial_bii = rbm->bii;
ret = gfs2_reservation_check_and_update(rbm, ip,
minext ? *minext : 0,
&maxext);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (ret == 0)
return 0;
if (ret > 0) {
n += (rbm->bii - initial_bii);
goto next_iter;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
}
if (ret == -E2BIG) {
rbm->bii = 0;
rbm->offset = 0;
n += (rbm->bii - initial_bii);
goto res_covered_end_of_rgrp;
}
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
return ret;
bitmap_full: /* Mark bitmap as full and fall through */
if ((state == GFS2_BLKST_FREE) && initial_offset == 0)
set_bit(GBF_FULL, &bi->bi_flags);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
next_bitmap: /* Find next bitmap in the rgrp */
rbm->offset = 0;
rbm->bii++;
if (rbm->bii == rbm->rgd->rd_length)
rbm->bii = 0;
res_covered_end_of_rgrp:
if ((rbm->bii == 0) && nowrap)
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
break;
n++;
next_iter:
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (n >= iters)
break;
}
if (minext == NULL || state != GFS2_BLKST_FREE)
return -ENOSPC;
/* If the extent was too small, and it's smaller than the smallest
to have failed before, remember for future reference that it's
useless to search this rgrp again for this amount or more. */
if ((first_offset == 0) && (first_bii == 0) &&
(*minext < rbm->rgd->rd_extfail_pt))
rbm->rgd->rd_extfail_pt = *minext;
/* If the maximum extent we found is big enough to fulfill the
minimum requirements, use it anyway. */
if (maxext.len) {
*rbm = maxext.rbm;
*minext = maxext.len;
return 0;
}
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
return -ENOSPC;
}
/**
* try_rgrp_unlink - Look for any unlinked, allocated, but unused inodes
* @rgd: The rgrp
* @last_unlinked: block address of the last dinode we unlinked
* @skip: block address we should explicitly not unlink
*
* Returns: 0 if no error
* The inode, if one has been found, in inode.
*/
static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip)
{
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
u64 block;
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_glock *gl;
struct gfs2_inode *ip;
int error;
int found = 0;
struct gfs2_rbm rbm = { .rgd = rgd, .bii = 0, .offset = 0 };
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
while (1) {
down_write(&sdp->sd_log_flush_lock);
error = gfs2_rbm_find(&rbm, GFS2_BLKST_UNLINKED, NULL, NULL,
true, NULL);
up_write(&sdp->sd_log_flush_lock);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (error == -ENOSPC)
break;
if (WARN_ON_ONCE(error))
break;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
block = gfs2_rbm_to_block(&rbm);
if (gfs2_rbm_from_block(&rbm, block + 1))
break;
if (*last_unlinked != NO_BLOCK && block <= *last_unlinked)
continue;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (block == skip)
continue;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
*last_unlinked = block;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
error = gfs2_glock_get(sdp, block, &gfs2_inode_glops, CREATE, &gl);
if (error)
continue;
/* If the inode is already in cache, we can ignore it here
* because the existing inode disposal code will deal with
* it when all refs have gone away. Accessing gl_object like
* this is not safe in general. Here it is ok because we do
* not dereference the pointer, and we only need an approx
* answer to whether it is NULL or not.
*/
ip = gl->gl_object;
if (ip || queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
gfs2_glock_put(gl);
else
found++;
/* Limit reclaim to sensible number of tasks */
if (found > NR_CPUS)
return;
}
rgd->rd_flags &= ~GFS2_RDF_CHECK;
return;
}
/**
* gfs2_rgrp_congested - Use stats to figure out whether an rgrp is congested
* @rgd: The rgrp in question
* @loops: An indication of how picky we can be (0=very, 1=less so)
*
* This function uses the recently added glock statistics in order to
* figure out whether a parciular resource group is suffering from
* contention from multiple nodes. This is done purely on the basis
* of timings, since this is the only data we have to work with and
* our aim here is to reject a resource group which is highly contended
* but (very important) not to do this too often in order to ensure that
* we do not land up introducing fragmentation by changing resource
* groups when not actually required.
*
* The calculation is fairly simple, we want to know whether the SRTTB
* (i.e. smoothed round trip time for blocking operations) to acquire
* the lock for this rgrp's glock is significantly greater than the
* time taken for resource groups on average. We introduce a margin in
* the form of the variable @var which is computed as the sum of the two
* respective variences, and multiplied by a factor depending on @loops
* and whether we have a lot of data to base the decision on. This is
* then tested against the square difference of the means in order to
* decide whether the result is statistically significant or not.
*
* Returns: A boolean verdict on the congestion status
*/
static bool gfs2_rgrp_congested(const struct gfs2_rgrpd *rgd, int loops)
{
const struct gfs2_glock *gl = rgd->rd_gl;
const struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct gfs2_lkstats *st;
u64 r_dcount, l_dcount;
u64 l_srttb, a_srttb = 0;
s64 srttb_diff;
u64 sqr_diff;
u64 var;
int cpu, nonzero = 0;
preempt_disable();
for_each_present_cpu(cpu) {
st = &per_cpu_ptr(sdp->sd_lkstats, cpu)->lkstats[LM_TYPE_RGRP];
if (st->stats[GFS2_LKS_SRTTB]) {
a_srttb += st->stats[GFS2_LKS_SRTTB];
nonzero++;
}
}
st = &this_cpu_ptr(sdp->sd_lkstats)->lkstats[LM_TYPE_RGRP];
if (nonzero)
do_div(a_srttb, nonzero);
r_dcount = st->stats[GFS2_LKS_DCOUNT];
var = st->stats[GFS2_LKS_SRTTVARB] +
gl->gl_stats.stats[GFS2_LKS_SRTTVARB];
preempt_enable();
l_srttb = gl->gl_stats.stats[GFS2_LKS_SRTTB];
l_dcount = gl->gl_stats.stats[GFS2_LKS_DCOUNT];
if ((l_dcount < 1) || (r_dcount < 1) || (a_srttb == 0))
return false;
srttb_diff = a_srttb - l_srttb;
sqr_diff = srttb_diff * srttb_diff;
var *= 2;
if (l_dcount < 8 || r_dcount < 8)
var *= 2;
if (loops == 1)
var *= 2;
return ((srttb_diff < 0) && (sqr_diff > var));
}
/**
* gfs2_rgrp_used_recently
* @rs: The block reservation with the rgrp to test
* @msecs: The time limit in milliseconds
*
* Returns: True if the rgrp glock has been used within the time limit
*/
static bool gfs2_rgrp_used_recently(const struct gfs2_blkreserv *rs,
u64 msecs)
{
u64 tdiff;
tdiff = ktime_to_ns(ktime_sub(ktime_get_real(),
rs->rs_rbm.rgd->rd_gl->gl_dstamp));
return tdiff > (msecs * 1000 * 1000);
}
static u32 gfs2_orlov_skip(const struct gfs2_inode *ip)
{
const struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
u32 skip;
get_random_bytes(&skip, sizeof(skip));
return skip % sdp->sd_rgrps;
}
static bool gfs2_select_rgrp(struct gfs2_rgrpd **pos, const struct gfs2_rgrpd *begin)
{
struct gfs2_rgrpd *rgd = *pos;
struct gfs2_sbd *sdp = rgd->rd_sbd;
rgd = gfs2_rgrpd_get_next(rgd);
if (rgd == NULL)
rgd = gfs2_rgrpd_get_first(sdp);
*pos = rgd;
if (rgd != begin) /* If we didn't wrap */
return true;
return false;
}
/**
* fast_to_acquire - determine if a resource group will be fast to acquire
*
* If this is one of our preferred rgrps, it should be quicker to acquire,
* because we tried to set ourselves up as dlm lock master.
*/
static inline int fast_to_acquire(struct gfs2_rgrpd *rgd)
{
struct gfs2_glock *gl = rgd->rd_gl;
if (gl->gl_state != LM_ST_UNLOCKED && list_empty(&gl->gl_holders) &&
!test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags) &&
!test_bit(GLF_DEMOTE, &gl->gl_flags))
return 1;
if (rgd->rd_flags & GFS2_RDF_PREFERRED)
return 1;
return 0;
}
/**
* gfs2_inplace_reserve - Reserve space in the filesystem
* @ip: the inode to reserve space for
* @ap: the allocation parameters
*
* We try our best to find an rgrp that has at least ap->target blocks
* available. After a couple of passes (loops == 2), the prospects of finding
* such an rgrp diminish. At this stage, we return the first rgrp that has
* atleast ap->min_target blocks available. Either way, we set ap->allowed to
* the number of blocks available in the chosen rgrp.
*
* Returns: 0 on success,
* -ENOMEM if a suitable rgrp can't be found
* errno otherwise
*/
int gfs2_inplace_reserve(struct gfs2_inode *ip, struct gfs2_alloc_parms *ap)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *begin = NULL;
struct gfs2_blkreserv *rs = ip->i_res;
int error = 0, rg_locked, flags = 0;
u64 last_unlinked = NO_BLOCK;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
int loops = 0;
u32 skip = 0;
if (sdp->sd_args.ar_rgrplvb)
flags |= GL_SKIP;
if (gfs2_assert_warn(sdp, ap->target))
return -EINVAL;
if (gfs2_rs_active(rs)) {
begin = rs->rs_rbm.rgd;
} else if (ip->i_rgd && rgrp_contains_block(ip->i_rgd, ip->i_goal)) {
rs->rs_rbm.rgd = begin = ip->i_rgd;
} else {
check_and_update_goal(ip);
rs->rs_rbm.rgd = begin = gfs2_blk2rgrpd(sdp, ip->i_goal, 1);
}
if (S_ISDIR(ip->i_inode.i_mode) && (ap->aflags & GFS2_AF_ORLOV))
skip = gfs2_orlov_skip(ip);
if (rs->rs_rbm.rgd == NULL)
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 08:53:19 +00:00
return -EBADSLT;
while (loops < 3) {
rg_locked = 1;
if (!gfs2_glock_is_locked_by_me(rs->rs_rbm.rgd->rd_gl)) {
rg_locked = 0;
if (skip && skip--)
goto next_rgrp;
if (!gfs2_rs_active(rs)) {
if (loops == 0 &&
!fast_to_acquire(rs->rs_rbm.rgd))
goto next_rgrp;
if ((loops < 2) &&
gfs2_rgrp_used_recently(rs, 1000) &&
gfs2_rgrp_congested(rs->rs_rbm.rgd, loops))
goto next_rgrp;
}
error = gfs2_glock_nq_init(rs->rs_rbm.rgd->rd_gl,
LM_ST_EXCLUSIVE, flags,
&rs->rs_rgd_gh);
if (unlikely(error))
return error;
if (!gfs2_rs_active(rs) && (loops < 2) &&
gfs2_rgrp_congested(rs->rs_rbm.rgd, loops))
goto skip_rgrp;
if (sdp->sd_args.ar_rgrplvb) {
error = update_rgrp_lvb(rs->rs_rbm.rgd);
if (unlikely(error)) {
gfs2_glock_dq_uninit(&rs->rs_rgd_gh);
return error;
}
}
}
/* Skip unuseable resource groups */
if ((rs->rs_rbm.rgd->rd_flags & (GFS2_RGF_NOALLOC |
GFS2_RDF_ERROR)) ||
(loops == 0 && ap->target > rs->rs_rbm.rgd->rd_extfail_pt))
goto skip_rgrp;
if (sdp->sd_args.ar_rgrplvb)
gfs2_rgrp_bh_get(rs->rs_rbm.rgd);
/* Get a reservation if we don't already have one */
if (!gfs2_rs_active(rs))
rg_mblk_search(rs->rs_rbm.rgd, ip, ap);
/* Skip rgrps when we can't get a reservation on first pass */
if (!gfs2_rs_active(rs) && (loops < 1))
goto check_rgrp;
/* If rgrp has enough free space, use it */
if (rs->rs_rbm.rgd->rd_free_clone >= ap->target ||
(loops == 2 && ap->min_target &&
rs->rs_rbm.rgd->rd_free_clone >= ap->min_target)) {
ip->i_rgd = rs->rs_rbm.rgd;
ap->allowed = ip->i_rgd->rd_free_clone;
return 0;
}
check_rgrp:
/* Check for unlinked inodes which can be reclaimed */
if (rs->rs_rbm.rgd->rd_flags & GFS2_RDF_CHECK)
try_rgrp_unlink(rs->rs_rbm.rgd, &last_unlinked,
ip->i_no_addr);
skip_rgrp:
/* Drop reservation, if we couldn't use reserved rgrp */
if (gfs2_rs_active(rs))
gfs2_rs_deltree(rs);
/* Unlock rgrp if required */
if (!rg_locked)
gfs2_glock_dq_uninit(&rs->rs_rgd_gh);
next_rgrp:
/* Find the next rgrp, and continue looking */
if (gfs2_select_rgrp(&rs->rs_rbm.rgd, begin))
continue;
if (skip)
continue;
/* If we've scanned all the rgrps, but found no free blocks
* then this checks for some less likely conditions before
* trying again.
*/
loops++;
/* Check that fs hasn't grown if writing to rindex */
if (ip == GFS2_I(sdp->sd_rindex) && !sdp->sd_rindex_uptodate) {
error = gfs2_ri_update(ip);
if (error)
return error;
}
/* Flushing the log may release space */
if (loops == 2)
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 03:26:55 +00:00
gfs2_log_flush(sdp, NULL, NORMAL_FLUSH);
}
return -ENOSPC;
}
/**
* gfs2_inplace_release - release an inplace reservation
* @ip: the inode the reservation was taken out on
*
* Release a reservation made by gfs2_inplace_reserve().
*/
void gfs2_inplace_release(struct gfs2_inode *ip)
{
struct gfs2_blkreserv *rs = ip->i_res;
if (rs->rs_rgd_gh.gh_gl)
gfs2_glock_dq_uninit(&rs->rs_rgd_gh);
}
/**
* gfs2_get_block_type - Check a block in a RG is of given type
* @rgd: the resource group holding the block
* @block: the block number
*
* Returns: The block type (GFS2_BLKST_*)
*/
static unsigned char gfs2_get_block_type(struct gfs2_rgrpd *rgd, u64 block)
{
struct gfs2_rbm rbm = { .rgd = rgd, };
int ret;
ret = gfs2_rbm_from_block(&rbm, block);
WARN_ON_ONCE(ret != 0);
return gfs2_testbit(&rbm);
}
/**
* gfs2_alloc_extent - allocate an extent from a given bitmap
* @rbm: the resource group information
* @dinode: TRUE if the first block we allocate is for a dinode
* @n: The extent length (value/result)
*
* Add the bitmap buffer to the transaction.
* Set the found bits to @new_state to change block's allocation state.
*/
static void gfs2_alloc_extent(const struct gfs2_rbm *rbm, bool dinode,
unsigned int *n)
{
struct gfs2_rbm pos = { .rgd = rbm->rgd, };
const unsigned int elen = *n;
u64 block;
int ret;
*n = 1;
block = gfs2_rbm_to_block(rbm);
gfs2_trans_add_meta(rbm->rgd->rd_gl, rbm_bi(rbm)->bi_bh);
gfs2_setbit(rbm, true, dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
block++;
while (*n < elen) {
ret = gfs2_rbm_from_block(&pos, block);
if (ret || gfs2_testbit(&pos) != GFS2_BLKST_FREE)
break;
gfs2_trans_add_meta(pos.rgd->rd_gl, rbm_bi(&pos)->bi_bh);
gfs2_setbit(&pos, true, GFS2_BLKST_USED);
(*n)++;
block++;
}
}
/**
* rgblk_free - Change alloc state of given block(s)
* @sdp: the filesystem
* @bstart: the start of a run of blocks to free
* @blen: the length of the block run (all must lie within ONE RG!)
* @new_state: GFS2_BLKST_XXX the after-allocation block state
*
* Returns: Resource group containing the block(s)
*/
static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart,
u32 blen, unsigned char new_state)
{
struct gfs2_rbm rbm;
struct gfs2_bitmap *bi, *bi_prev = NULL;
rbm.rgd = gfs2_blk2rgrpd(sdp, bstart, 1);
if (!rbm.rgd) {
if (gfs2_consist(sdp))
fs_err(sdp, "block = %llu\n", (unsigned long long)bstart);
return NULL;
}
gfs2_rbm_from_block(&rbm, bstart);
while (blen--) {
bi = rbm_bi(&rbm);
if (bi != bi_prev) {
if (!bi->bi_clone) {
bi->bi_clone = kmalloc(bi->bi_bh->b_size,
GFP_NOFS | __GFP_NOFAIL);
memcpy(bi->bi_clone + bi->bi_offset,
bi->bi_bh->b_data + bi->bi_offset,
bi->bi_len);
}
gfs2_trans_add_meta(rbm.rgd->rd_gl, bi->bi_bh);
bi_prev = bi;
}
gfs2_setbit(&rbm, false, new_state);
gfs2_rbm_incr(&rbm);
}
return rbm.rgd;
}
/**
* gfs2_rgrp_dump - print out an rgrp
* @seq: The iterator
* @gl: The glock in question
*
*/
void gfs2_rgrp_dump(struct seq_file *seq, const struct gfs2_glock *gl)
{
struct gfs2_rgrpd *rgd = gl->gl_object;
struct gfs2_blkreserv *trs;
const struct rb_node *n;
if (rgd == NULL)
return;
gfs2_print_dbg(seq, " R: n:%llu f:%02x b:%u/%u i:%u r:%u e:%u\n",
(unsigned long long)rgd->rd_addr, rgd->rd_flags,
rgd->rd_free, rgd->rd_free_clone, rgd->rd_dinodes,
rgd->rd_reserved, rgd->rd_extfail_pt);
spin_lock(&rgd->rd_rsspin);
for (n = rb_first(&rgd->rd_rstree); n; n = rb_next(&trs->rs_node)) {
trs = rb_entry(n, struct gfs2_blkreserv, rs_node);
dump_rs(seq, trs);
}
spin_unlock(&rgd->rd_rsspin);
}
static void gfs2_rgrp_error(struct gfs2_rgrpd *rgd)
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
fs_warn(sdp, "rgrp %llu has an error, marking it readonly until umount\n",
(unsigned long long)rgd->rd_addr);
fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
gfs2_rgrp_dump(NULL, rgd->rd_gl);
rgd->rd_flags |= GFS2_RDF_ERROR;
}
/**
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
* gfs2_adjust_reservation - Adjust (or remove) a reservation after allocation
* @ip: The inode we have just allocated blocks for
* @rbm: The start of the allocated blocks
* @len: The extent length
*
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
* Adjusts a reservation after an allocation has taken place. If the
* reservation does not match the allocation, or if it is now empty
* then it is removed.
*/
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
static void gfs2_adjust_reservation(struct gfs2_inode *ip,
const struct gfs2_rbm *rbm, unsigned len)
{
struct gfs2_blkreserv *rs = ip->i_res;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
struct gfs2_rgrpd *rgd = rbm->rgd;
unsigned rlen;
u64 block;
int ret;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
spin_lock(&rgd->rd_rsspin);
if (gfs2_rs_active(rs)) {
if (gfs2_rbm_eq(&rs->rs_rbm, rbm)) {
block = gfs2_rbm_to_block(rbm);
ret = gfs2_rbm_from_block(&rs->rs_rbm, block + len);
rlen = min(rs->rs_free, len);
rs->rs_free -= rlen;
rgd->rd_reserved -= rlen;
trace_gfs2_rs(rs, TRACE_RS_CLAIM);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (rs->rs_free && !ret)
goto out;
/* We used up our block reservation, so we should
reserve more blocks next time. */
atomic_add(RGRP_RSRV_ADDBLKS, &rs->rs_sizehint);
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
}
__rs_deltree(rs);
}
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
out:
spin_unlock(&rgd->rd_rsspin);
}
/**
* gfs2_set_alloc_start - Set starting point for block allocation
* @rbm: The rbm which will be set to the required location
* @ip: The gfs2 inode
* @dinode: Flag to say if allocation includes a new inode
*
* This sets the starting point from the reservation if one is active
* otherwise it falls back to guessing a start point based on the
* inode's goal block or the last allocation point in the rgrp.
*/
static void gfs2_set_alloc_start(struct gfs2_rbm *rbm,
const struct gfs2_inode *ip, bool dinode)
{
u64 goal;
if (gfs2_rs_active(ip->i_res)) {
*rbm = ip->i_res->rs_rbm;
return;
}
if (!dinode && rgrp_contains_block(rbm->rgd, ip->i_goal))
goal = ip->i_goal;
else
goal = rbm->rgd->rd_last_alloc + rbm->rgd->rd_data0;
gfs2_rbm_from_block(rbm, goal);
}
/**
* gfs2_alloc_blocks - Allocate one or more blocks of data and/or a dinode
* @ip: the inode to allocate the block for
* @bn: Used to return the starting block number
* @nblocks: requested number of blocks/extent length (value/result)
* @dinode: 1 if we're allocating a dinode block, else 0
* @generation: the generation number of the inode
*
* Returns: 0 or error
*/
int gfs2_alloc_blocks(struct gfs2_inode *ip, u64 *bn, unsigned int *nblocks,
bool dinode, u64 *generation)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct buffer_head *dibh;
struct gfs2_rbm rbm = { .rgd = ip->i_rgd, };
unsigned int ndata;
u64 block; /* block, within the file system scope */
int error;
gfs2_set_alloc_start(&rbm, ip, dinode);
error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, NULL, ip, false, NULL);
if (error == -ENOSPC) {
gfs2_set_alloc_start(&rbm, ip, dinode);
error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, NULL, NULL, false,
NULL);
}
/* Since all blocks are reserved in advance, this shouldn't happen */
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (error) {
fs_warn(sdp, "inum=%llu error=%d, nblocks=%u, full=%d fail_pt=%d\n",
(unsigned long long)ip->i_no_addr, error, *nblocks,
test_bit(GBF_FULL, &rbm.rgd->rd_bits->bi_flags),
rbm.rgd->rd_extfail_pt);
goto rgrp_error;
}
gfs2_alloc_extent(&rbm, dinode, nblocks);
block = gfs2_rbm_to_block(&rbm);
rbm.rgd->rd_last_alloc = block - rbm.rgd->rd_data0;
GFS2: Replace rgblk_search with gfs2_rbm_find This is part of a series of patches which are introducing the gfs2_rbm structure throughout the block allocation code. The main aim of this part is to create a search function which can deal directly with struct gfs2_rbm. In this case it specifies the initial position at which to start the search and also the point at which the search terminates. The net result of this is to clean up the search code and make it rather more readable, and the various possible exceptions which may occur during the search are partitioned into their own functions. There are some bug fixes too. We should not be checking the reservations while allocating extents - the time for that is when we are searching for where to put the extent, not when we've already made that decision. Also, rgblk_search had two uses, and in only one of those cases did it make sense to check for reservations. This is fixed in the new gfs2_rbm_find function, which has a cleaner interface. The reservation checking has been improved by always checking for contiguous reservations, and returning the first free block after all contiguous reservations. This is done under the spin lock to ensure consistancy of the tree. The allocation of extents is now in all cases done by the existing allocation code, and if there is an active reservation, that is updated after the fact. Again this is done under the spin lock, since it entails changing the lookup key for the reservation in question. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-08-01 19:35:05 +00:00
if (gfs2_rs_active(ip->i_res))
gfs2_adjust_reservation(ip, &rbm, *nblocks);
ndata = *nblocks;
if (dinode)
ndata--;
if (!dinode) {
ip->i_goal = block + ndata - 1;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (error == 0) {
struct gfs2_dinode *di =
(struct gfs2_dinode *)dibh->b_data;
gfs2_trans_add_meta(ip->i_gl, dibh);
di->di_goal_meta = di->di_goal_data =
cpu_to_be64(ip->i_goal);
brelse(dibh);
}
}
if (rbm.rgd->rd_free < *nblocks) {
pr_warn("nblocks=%u\n", *nblocks);
goto rgrp_error;
}
rbm.rgd->rd_free -= *nblocks;
if (dinode) {
rbm.rgd->rd_dinodes++;
*generation = rbm.rgd->rd_igeneration++;
if (*generation == 0)
*generation = rbm.rgd->rd_igeneration++;
}
gfs2_trans_add_meta(rbm.rgd->rd_gl, rbm.rgd->rd_bits[0].bi_bh);
gfs2_rgrp_out(rbm.rgd, rbm.rgd->rd_bits[0].bi_bh->b_data);
gfs2_rgrp_ondisk2lvb(rbm.rgd->rd_rgl, rbm.rgd->rd_bits[0].bi_bh->b_data);
gfs2_statfs_change(sdp, 0, -(s64)*nblocks, dinode ? 1 : 0);
if (dinode)
gfs2_trans_add_unrevoke(sdp, block, *nblocks);
gfs2_quota_change(ip, *nblocks, ip->i_inode.i_uid, ip->i_inode.i_gid);
rbm.rgd->rd_free_clone -= *nblocks;
trace_gfs2_block_alloc(ip, rbm.rgd, block, *nblocks,
dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED);
*bn = block;
return 0;
rgrp_error:
gfs2_rgrp_error(rbm.rgd);
return -EIO;
}
/**
* __gfs2_free_blocks - free a contiguous run of block(s)
* @ip: the inode these blocks are being freed from
* @bstart: first block of a run of contiguous blocks
* @blen: the length of the block run
* @meta: 1 if the blocks represent metadata
*
*/
void __gfs2_free_blocks(struct gfs2_inode *ip, u64 bstart, u32 blen, int meta)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd;
rgd = rgblk_free(sdp, bstart, blen, GFS2_BLKST_FREE);
if (!rgd)
return;
trace_gfs2_block_alloc(ip, rgd, bstart, blen, GFS2_BLKST_FREE);
rgd->rd_free += blen;
rgd->rd_flags &= ~GFS2_RGF_TRIMMED;
gfs2_trans_add_meta(rgd->rd_gl, rgd->rd_bits[0].bi_bh);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
gfs2_rgrp_ondisk2lvb(rgd->rd_rgl, rgd->rd_bits[0].bi_bh->b_data);
/* Directories keep their data in the metadata address space */
if (meta || ip->i_depth)
gfs2_meta_wipe(ip, bstart, blen);
GFS2: deallocation performance patch This patch is a performance improvement to GFS2's dealloc code. Rather than update the quota file and statfs file for every single block that's stripped off in unlink function do_strip, this patch keeps track and updates them once for every layer that's stripped. This is done entirely inside the existing transaction, so there should be no risk of corruption. The other functions that deallocate blocks will be unaffected because they are using wrapper functions that do the same thing that they do today. I tested this code on my roth cluster by creating 200 files in a directory, each of which is 100MB, then on four nodes, I simultaneously deleted the files, thus competing for GFS2 resources (but different files). The commands I used were: [root@roth-01]# time for i in `seq 1 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-02]# time for i in `seq 2 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-03]# time for i in `seq 3 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-05]# time for i in `seq 4 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done The performance increase was significant: roth-01 roth-02 roth-03 roth-05 --------- --------- --------- --------- old: real 0m34.027 0m25.021s 0m23.906s 0m35.646s new: real 0m22.379s 0m24.362s 0m24.133s 0m18.562s Total time spent deleting: old: 118.6s new: 89.4 For this particular case, this showed a 25% performance increase for GFS2 unlinks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-23 21:11:33 +00:00
}
GFS2: deallocation performance patch This patch is a performance improvement to GFS2's dealloc code. Rather than update the quota file and statfs file for every single block that's stripped off in unlink function do_strip, this patch keeps track and updates them once for every layer that's stripped. This is done entirely inside the existing transaction, so there should be no risk of corruption. The other functions that deallocate blocks will be unaffected because they are using wrapper functions that do the same thing that they do today. I tested this code on my roth cluster by creating 200 files in a directory, each of which is 100MB, then on four nodes, I simultaneously deleted the files, thus competing for GFS2 resources (but different files). The commands I used were: [root@roth-01]# time for i in `seq 1 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-02]# time for i in `seq 2 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-03]# time for i in `seq 3 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done [root@roth-05]# time for i in `seq 4 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done The performance increase was significant: roth-01 roth-02 roth-03 roth-05 --------- --------- --------- --------- old: real 0m34.027 0m25.021s 0m23.906s 0m35.646s new: real 0m22.379s 0m24.362s 0m24.133s 0m18.562s Total time spent deleting: old: 118.6s new: 89.4 For this particular case, this showed a 25% performance increase for GFS2 unlinks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-02-23 21:11:33 +00:00
/**
* gfs2_free_meta - free a contiguous run of data block(s)
* @ip: the inode these blocks are being freed from
* @bstart: first block of a run of contiguous blocks
* @blen: the length of the block run
*
*/
void gfs2_free_meta(struct gfs2_inode *ip, u64 bstart, u32 blen)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
__gfs2_free_blocks(ip, bstart, blen, 1);
gfs2_statfs_change(sdp, 0, +blen, 0);
gfs2_quota_change(ip, -(s64)blen, ip->i_inode.i_uid, ip->i_inode.i_gid);
}
void gfs2_unlink_di(struct inode *inode)
{
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct gfs2_rgrpd *rgd;
u64 blkno = ip->i_no_addr;
rgd = rgblk_free(sdp, blkno, 1, GFS2_BLKST_UNLINKED);
if (!rgd)
return;
trace_gfs2_block_alloc(ip, rgd, blkno, 1, GFS2_BLKST_UNLINKED);
gfs2_trans_add_meta(rgd->rd_gl, rgd->rd_bits[0].bi_bh);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
gfs2_rgrp_ondisk2lvb(rgd->rd_rgl, rgd->rd_bits[0].bi_bh->b_data);
update_rgrp_lvb_unlinked(rgd, 1);
}
static void gfs2_free_uninit_di(struct gfs2_rgrpd *rgd, u64 blkno)
{
struct gfs2_sbd *sdp = rgd->rd_sbd;
struct gfs2_rgrpd *tmp_rgd;
tmp_rgd = rgblk_free(sdp, blkno, 1, GFS2_BLKST_FREE);
if (!tmp_rgd)
return;
gfs2_assert_withdraw(sdp, rgd == tmp_rgd);
if (!rgd->rd_dinodes)
gfs2_consist_rgrpd(rgd);
rgd->rd_dinodes--;
rgd->rd_free++;
gfs2_trans_add_meta(rgd->rd_gl, rgd->rd_bits[0].bi_bh);
gfs2_rgrp_out(rgd, rgd->rd_bits[0].bi_bh->b_data);
gfs2_rgrp_ondisk2lvb(rgd->rd_rgl, rgd->rd_bits[0].bi_bh->b_data);
update_rgrp_lvb_unlinked(rgd, -1);
gfs2_statfs_change(sdp, 0, +1, -1);
}
void gfs2_free_di(struct gfs2_rgrpd *rgd, struct gfs2_inode *ip)
{
gfs2_free_uninit_di(rgd, ip->i_no_addr);
trace_gfs2_block_alloc(ip, rgd, ip->i_no_addr, 1, GFS2_BLKST_FREE);
gfs2_quota_change(ip, -1, ip->i_inode.i_uid, ip->i_inode.i_gid);
gfs2_meta_wipe(ip, ip->i_no_addr, 1);
}
/**
* gfs2_check_blk_type - Check the type of a block
* @sdp: The superblock
* @no_addr: The block number to check
* @type: The block type we are looking for
*
* Returns: 0 if the block type matches the expected type
* -ESTALE if it doesn't match
* or -ve errno if something went wrong while checking
*/
int gfs2_check_blk_type(struct gfs2_sbd *sdp, u64 no_addr, unsigned int type)
{
struct gfs2_rgrpd *rgd;
struct gfs2_holder rgd_gh;
int error = -EINVAL;
rgd = gfs2_blk2rgrpd(sdp, no_addr, 1);
if (!rgd)
goto fail;
error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_SHARED, 0, &rgd_gh);
if (error)
goto fail;
if (gfs2_get_block_type(rgd, no_addr) != type)
error = -ESTALE;
gfs2_glock_dq_uninit(&rgd_gh);
fail:
return error;
}
/**
* gfs2_rlist_add - add a RG to a list of RGs
* @ip: the inode
* @rlist: the list of resource groups
* @block: the block
*
* Figure out what RG a block belongs to and add that RG to the list
*
* FIXME: Don't use NOFAIL
*
*/
void gfs2_rlist_add(struct gfs2_inode *ip, struct gfs2_rgrp_list *rlist,
u64 block)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
struct gfs2_rgrpd *rgd;
struct gfs2_rgrpd **tmp;
unsigned int new_space;
unsigned int x;
if (gfs2_assert_warn(sdp, !rlist->rl_ghs))
return;
if (ip->i_rgd && rgrp_contains_block(ip->i_rgd, block))
rgd = ip->i_rgd;
else
rgd = gfs2_blk2rgrpd(sdp, block, 1);
if (!rgd) {
fs_err(sdp, "rlist_add: no rgrp for block %llu\n", (unsigned long long)block);
return;
}
ip->i_rgd = rgd;
for (x = 0; x < rlist->rl_rgrps; x++)
if (rlist->rl_rgd[x] == rgd)
return;
if (rlist->rl_rgrps == rlist->rl_space) {
new_space = rlist->rl_space + 10;
tmp = kcalloc(new_space, sizeof(struct gfs2_rgrpd *),
GFP_NOFS | __GFP_NOFAIL);
if (rlist->rl_rgd) {
memcpy(tmp, rlist->rl_rgd,
rlist->rl_space * sizeof(struct gfs2_rgrpd *));
kfree(rlist->rl_rgd);
}
rlist->rl_space = new_space;
rlist->rl_rgd = tmp;
}
rlist->rl_rgd[rlist->rl_rgrps++] = rgd;
}
/**
* gfs2_rlist_alloc - all RGs have been added to the rlist, now allocate
* and initialize an array of glock holders for them
* @rlist: the list of resource groups
* @state: the lock state to acquire the RG lock in
*
* FIXME: Don't use NOFAIL
*
*/
void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist, unsigned int state)
{
unsigned int x;
rlist->rl_ghs = kcalloc(rlist->rl_rgrps, sizeof(struct gfs2_holder),
GFP_NOFS | __GFP_NOFAIL);
for (x = 0; x < rlist->rl_rgrps; x++)
gfs2_holder_init(rlist->rl_rgd[x]->rd_gl,
state, 0,
&rlist->rl_ghs[x]);
}
/**
* gfs2_rlist_free - free a resource group list
* @rlist: the list of resource groups
*
*/
void gfs2_rlist_free(struct gfs2_rgrp_list *rlist)
{
unsigned int x;
kfree(rlist->rl_rgd);
if (rlist->rl_ghs) {
for (x = 0; x < rlist->rl_rgrps; x++)
gfs2_holder_uninit(&rlist->rl_ghs[x]);
kfree(rlist->rl_ghs);
rlist->rl_ghs = NULL;
}
}