leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
linux/scripts/package/mkspec

149 lines
4.8 KiB
Plaintext
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#!/bin/sh
#
rpm-pkg: add generation of kernel-devel Change the spec file to generate a kernel-devel module allowing for compilation of external kernel modules. This patch requires a new minimum RPM level of 4.0.3. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-08 17:14:06 +00:00
# Output a simple RPM spec file.
# This version assumes a minimum of RPM 4.0.3.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#
# The only gothic bit here is redefining install_post to avoid
# stripping the symbols from files in the kernel which we want
#
# Patched for non-x86 by Opencon (L) 2002 <opencon@rio.skydome.net>
#
# how we were called determines which rpms we build and how we build them
kbuild: rpm-pkg: clean up mkspec Clean up the mkspec without changing the behavior. - grep CONFIG_DRM=y more simply - move "EXCLUDE" out of the "%install" section because it can be computed when the spec file is generated - remove "BuildRoot:" field, which is now redundant - do not mkdir $RPM_BUILD_ROOT/lib/modules explicitly because it is automatically created by "make modules_install" - exclude "%package devel" from source package spec file because it does not make sense where "%files devel" is already excluded - exclude "%build" from source package spec file - remove unneeded "make clean" because we had already cleaned before making tar file - merge two %ifarch ia64 conditionals - replace KBUILD_IMAGE with direct use of $(make image_name) - remove trailing empty line from the spec file Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:05 +00:00
if [ "$1" = prebuilt ]; then
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
S=DEL
kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used Zhenzhong Duan reported that running 'make O=/build/kernel binrpm-pkg' failed with the following errors: Running 'make O=/build/kernel binrpm-pkg' failed with below two errors. Makefile:600: include/config/auto.conf: No such file or directory + cp make -C /mnt/root/kernel O=/build/kernel image_name make -f /mnt/root/kernel/Makefile ... cp: invalid option -- 'C' Try 'cp --help' for more information. Prior to commit 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code 'make image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. 'make image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-05 07:51:49 +00:00
MAKE="$MAKE -f $srctree/Makefile"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
else
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
S=
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
fi
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
if grep -q CONFIG_MODULES=y .config; then
M=
else
M=DEL
fi
kbuild: rpm-pkg: clean up mkspec Clean up the mkspec without changing the behavior. - grep CONFIG_DRM=y more simply - move "EXCLUDE" out of the "%install" section because it can be computed when the spec file is generated - remove "BuildRoot:" field, which is now redundant - do not mkdir $RPM_BUILD_ROOT/lib/modules explicitly because it is automatically created by "make modules_install" - exclude "%package devel" from source package spec file because it does not make sense where "%files devel" is already excluded - exclude "%build" from source package spec file - remove unneeded "make clean" because we had already cleaned before making tar file - merge two %ifarch ia64 conditionals - replace KBUILD_IMAGE with direct use of $(make image_name) - remove trailing empty line from the spec file Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:05 +00:00
if grep -q CONFIG_DRM=y .config; then
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PROVIDES=kernel-drm
fi
PROVIDES="$PROVIDES kernel-$KERNELRELEASE"
kbuild: rpm-pkg: clean up mkspec Clean up the mkspec without changing the behavior. - grep CONFIG_DRM=y more simply - move "EXCLUDE" out of the "%install" section because it can be computed when the spec file is generated - remove "BuildRoot:" field, which is now redundant - do not mkdir $RPM_BUILD_ROOT/lib/modules explicitly because it is automatically created by "make modules_install" - exclude "%package devel" from source package spec file because it does not make sense where "%files devel" is already excluded - exclude "%build" from source package spec file - remove unneeded "make clean" because we had already cleaned before making tar file - merge two %ifarch ia64 conditionals - replace KBUILD_IMAGE with direct use of $(make image_name) - remove trailing empty line from the spec file Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:05 +00:00
__KERNELRELEASE=$(echo $KERNELRELEASE | sed -e "s/-/_/g")
kbuild: create *.mod with full directory path and remove MODVERDIR While descending directories, Kbuild produces objects for modules, but do not link final *.ko files; it is done in the modpost. To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR) for every module it is building. Some post-processing steps read the necessary information from *.mod files. This avoids descending into directories again. This mechanism was introduced in 2003 or so. Later, commit 551559e13af1 ("kbuild: implement modules.order") added modules.order. So, we can simply read it out to know all the modules with directory paths. This is easier than parsing the first line of *.mod files. $(MODVERDIR) has a flat directory structure, that is, *.mod files are named only with base names. This is based on the assumption that the module name is unique across the tree. This assumption is really fragile. Stephen Rothwell reported a race condition caused by a module name conflict: https://lkml.org/lkml/2019/5/13/991 In parallel building, two different threads could write to the same $(MODVERDIR)/*.mod simultaneously. Non-unique module names are the source of all kind of troubles, hence commit 3a48a91901c5 ("kbuild: check uniqueness of module names") introduced a new checker script. However, it is still fragile in the build system point of view because this race happens before scripts/modules-check.sh is invoked. If it happens again, the modpost will emit unclear error messages. To fix this issue completely, create *.mod with full directory path so that two threads never attempt to write to the same file. $(MODVERDIR) is no longer needed. Since modules with directory paths are listed in modules.order, Kbuild is still able to find *.mod files without additional descending. I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y, it occurs not only in the modpost stage, but also during directory descending, where sumversion.c may parse stale *.mod files. It would emit 'No such file or directory' warning when an object consisting a module is renamed, or when a single-obj module is turned into a multi-obj module or vice versa. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-07-17 06:17:57 +00:00
EXCLUDES="$RCS_TAR_IGNORE --exclude=*vmlinux* --exclude=*.mod \
kbuild: rpm-pkg: clean up mkspec Clean up the mkspec without changing the behavior. - grep CONFIG_DRM=y more simply - move "EXCLUDE" out of the "%install" section because it can be computed when the spec file is generated - remove "BuildRoot:" field, which is now redundant - do not mkdir $RPM_BUILD_ROOT/lib/modules explicitly because it is automatically created by "make modules_install" - exclude "%package devel" from source package spec file because it does not make sense where "%files devel" is already excluded - exclude "%build" from source package spec file - remove unneeded "make clean" because we had already cleaned before making tar file - merge two %ifarch ia64 conditionals - replace KBUILD_IMAGE with direct use of $(make image_name) - remove trailing empty line from the spec file Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:05 +00:00
--exclude=*.o --exclude=*.ko --exclude=*.cmd --exclude=Documentation \
kbuild: do not create wrappers for header-test-y header-test-y does not work with headers in sub-directories. For example, you may want to write a Makefile, like this: include/linux/Kbuild: header-test-y += mtd/nand.h This entry will create a wrapper include/linux/mtd/nand.hdrtest.c with the following content: #include "mtd/nand.h" To make this work, we need to add $(srctree)/include/linux to the header search path. It would be tedious to add ccflags-y. Instead, we could change the *.hdrtest.c rule to wrap: #include "nand.h" This works for in-tree build since #include "..." searches in the relative path from the header with this directive. For O=... build, we need to add $(srctree)/include/linux/mtd to the header search path, which will be even more tedious. After all, I thought it would be handier to compile headers directly without creating wrappers. I added a new build rule to compile %.h into %.h.s The target is %.h.s instead of %.h.o because it is slightly faster. Also, as for GCC, an empty assembly is smaller than an empty object. I wrote the build rule: $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $< instead of: $(CC) $(c_flags) -S -o $@ -x c $< Both work fine with GCC, but the latter is bad for Clang. This comes down to the difference in the -Wunused-function policy. GCC does not warn about unused 'static inline' functions at all. Clang does not warn about the ones in included headers, but does about the ones in the source. So, we should handle headers as headers, not as source files. In fact, this has been hidden since commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions"), but we should not rely on that. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Jani Nikula <jani.nikula@intel.com>
2019-07-01 00:58:41 +00:00
--exclude=.config.old --exclude=.missing-syscalls.d --exclude=*.s"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
# We can label the here-doc lines for conditional output to the spec file
#
# Labels:
# $S: this line is enabled only when building source package
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
# $M: this line is enabled only when CONFIG_MODULES is enabled
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
sed -e '/^DEL/d' -e 's/^\t*//' <<EOF
Name: kernel
Summary: The Linux Kernel
Version: $__KERNELRELEASE
Release: $(cat .version 2>/dev/null || echo 1)
License: GPL
Group: System Environment/Kernel
Vendor: The Linux Community
kbuild: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-19 19:46:02 +00:00
URL: https://www.kernel.org
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
$S Source: kernel-$__KERNELRELEASE.tar.gz
Provides: $PROVIDES
kbuild: rpm-pkg: fix build error when _arch is undefined Cross-building (bin)rpm-pkg fails on several architectures. For example, 'make ARCH=arm binrpm-pkg' fails like follows: sh ./scripts/package/mkspec prebuilt > ./binkernel.spec rpmbuild --define "_builddir ." --target \ arm -bb ./binkernel.spec Building target platforms: arm Building for target arm warning: line 19: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0S8t2F + umask 022 + cd . + mkdir -p /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot + make -f ./Makefile image_name + cp arch/arm/boot/zImage /home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch}/boot/vmlinuz-5.19.0-rc6 + make -f ./Makefile INSTALL_MOD_PATH=/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.%{_arch} modules_install make[3]: *** No rule to make target '/home/masahiro/rpmbuild/BUILDROOT/kernel-5.19.0_rc6-19.arch/arm/crypto/aes-arm-bs.ko{_arch}/lib/modules/5.19.0-rc6/kernel/%', needed by '__modinst'. Stop. make[2]: *** [Makefile:1768: modules_install] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.0S8t2F (%install) By default, 'buildroot' contains %{_arch} (see /usr/lib/rpm/macros). _arch is generally defined in /usr/lib/rpm/platforms/*/macros, where the platform sub-directory is specified by --target= option for cross builds. If the given arch does not exist, %{_arch} is not expanded. In the example above, --target=arm is passed to rpmbuild, but /usr/lib/rpm/platforms/arm-linux/ does not exist. The '%' character in the path confuses GNU make and rpmbuild. The same occurs for such architectures as csky, microblaze, nios2, etc. Define _arch if it has not been defined. Reported-by: Jason Self <jason@bluehome.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-07-14 05:02:40 +00:00
# $UTS_MACHINE as a fallback of _arch in case
# /usr/lib/rpm/platform/*/macros was not included.
%define _arch %{?_arch:$UTS_MACHINE}
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%define __spec_install_post /usr/lib/rpm/brp-compress || :
%define debug_package %{nil}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%description
The Linux Kernel, the operating system core itself
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%package headers
Summary: Header files for the Linux kernel for use by glibc
Group: Development/System
Obsoletes: kernel-headers
Provides: kernel-headers = %{version}
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
kbuild: rpm-pkg: clean up mkspec Clean up the mkspec without changing the behavior. - grep CONFIG_DRM=y more simply - move "EXCLUDE" out of the "%install" section because it can be computed when the spec file is generated - remove "BuildRoot:" field, which is now redundant - do not mkdir $RPM_BUILD_ROOT/lib/modules explicitly because it is automatically created by "make modules_install" - exclude "%package devel" from source package spec file because it does not make sense where "%files devel" is already excluded - exclude "%build" from source package spec file - remove unneeded "make clean" because we had already cleaned before making tar file - merge two %ifarch ia64 conditionals - replace KBUILD_IMAGE with direct use of $(make image_name) - remove trailing empty line from the spec file Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:05 +00:00
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
$S$M %package devel
$S$M Summary: Development package for building kernel modules to match the $__KERNELRELEASE kernel
$S$M Group: System Environment/Kernel
$S$M AutoReqProv: no
$S$M %description -n kernel-devel
$S$M This package provides kernel headers and makefiles sufficient to build modules
$S$M against the $__KERNELRELEASE kernel package.
$S$M
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
$S %prep
$S %setup -q
$S
$S %build
kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used Zhenzhong Duan reported that running 'make O=/build/kernel binrpm-pkg' failed with the following errors: Running 'make O=/build/kernel binrpm-pkg' failed with below two errors. Makefile:600: include/config/auto.conf: No such file or directory + cp make -C /mnt/root/kernel O=/build/kernel image_name make -f /mnt/root/kernel/Makefile ... cp: invalid option -- 'C' Try 'cp --help' for more information. Prior to commit 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code 'make image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. 'make image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-05 07:51:49 +00:00
$S $MAKE %{?_smp_mflags} KBUILD_BUILD_VERSION=%{release}
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
$S
%install
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
mkdir -p %{buildroot}/boot
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%ifarch ia64
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
mkdir -p %{buildroot}/boot/efi
kbuild: rpm-pkg: fix breakage when V=1 is used Doing make V=1 binrpm-pkg results in: Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ + umask 022 + cd . + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot + make -f ./Makefile image_name + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+ cp: invalid option -- 'e' Try 'cp --help' for more information. error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install) Because the make call to get the image name is verbose and prints additional information. Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets") Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-16 12:41:12 +00:00
cp \$($MAKE -s image_name) %{buildroot}/boot/efi/vmlinuz-$KERNELRELEASE
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
ln -s efi/vmlinuz-$KERNELRELEASE %{buildroot}/boot/
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%else
kbuild: rpm-pkg: fix breakage when V=1 is used Doing make V=1 binrpm-pkg results in: Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EgV6qJ + umask 022 + cd . + /bin/rm -rf /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + /bin/mkdir -p /home/scgl/rpmbuild/BUILDROOT + /bin/mkdir /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x + mkdir -p /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot + make -f ./Makefile image_name + cp test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) arch/s390/boot/bzImage /home/scgl/rpmbuild/BUILDROOT/kernel-6.0.0_rc5+-1.s390x/boot/vmlinuz-6.0.0-rc5+ cp: invalid option -- 'e' Try 'cp --help' for more information. error: Bad exit status from /var/tmp/rpm-tmp.EgV6qJ (%install) Because the make call to get the image name is verbose and prints additional information. Fixes: 993bdde94547 ("kbuild: add image_name to no-sync-config-targets") Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-09-16 12:41:12 +00:00
cp \$($MAKE -s image_name) %{buildroot}/boot/vmlinuz-$KERNELRELEASE
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%endif
kbuild: rpm-pkg: fix binrpm-pkg breakage when O= is used Zhenzhong Duan reported that running 'make O=/build/kernel binrpm-pkg' failed with the following errors: Running 'make O=/build/kernel binrpm-pkg' failed with below two errors. Makefile:600: include/config/auto.conf: No such file or directory + cp make -C /mnt/root/kernel O=/build/kernel image_name make -f /mnt/root/kernel/Makefile ... cp: invalid option -- 'C' Try 'cp --help' for more information. Prior to commit 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build"), both srctree and objtree were added to --include-dir redundantly, and the wrong code 'make image_name' was working by relying on that. Now, the potential issue that had previously been hidden just showed up. 'make image_name' recurses to the generated $(objtree)/Makefile and ends up with running in srctree, which is incorrect. It should be invoked with '-f $srctree/Makefile' (or KBUILD_SRC=) to be executed in objtree. Fixes: 80463f1b7bf9 ("kbuild: add --include-dir flag only for out-of-tree build") Reported-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-05 07:51:49 +00:00
$M $MAKE %{?_smp_mflags} INSTALL_MOD_PATH=%{buildroot} modules_install
$MAKE %{?_smp_mflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
cp System.map %{buildroot}/boot/System.map-$KERNELRELEASE
cp .config %{buildroot}/boot/config-$KERNELRELEASE
$S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/build
$S$M rm -f %{buildroot}/lib/modules/$KERNELRELEASE/source
$S$M mkdir -p %{buildroot}/usr/src/kernels/$KERNELRELEASE
kbuild: rpm-pkg: Support GNU tar >= 1.29 There is a change in how command line parsing is done in this version. Excludes and includes are now ordered with the file list. Since the spec file puts the file list before the exclude list it means newer tar ignores the excludes and packs all the build output into the kernel-devel RPM resulting in a huge package. Simple argument re-ordering fixes the problem. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-23 17:59:36 +00:00
$S$M tar cf - $EXCLUDES . | tar xf - -C %{buildroot}/usr/src/kernels/$KERNELRELEASE
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
$S$M cd %{buildroot}/lib/modules/$KERNELRELEASE
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
$S$M ln -sf /usr/src/kernels/$KERNELRELEASE build
$S$M ln -sf /usr/src/kernels/$KERNELRELEASE source
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%clean
kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} $RPM_BUILD_ROOT must be escaped to prevent shell from expanding it when generating the spec file. %{build_root} is more readable than \$RPM_BUILD_ROOT. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:08 +00:00
rm -rf %{buildroot}
kbuild: add vmlinux to kernel rpm We are building an automated system to test kernels weekly and need to provide an rpm to our QA dept. We would like to use the ability to create kernel rpms already in the kernel's Makefile, but need the vmlinux file included in the rpm for later debugging. This patch adds a compressed vmlinux to the kernel rpm when doing a make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot. Signed-off-by: Josh Hunt <josh@scalex86.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-12 05:10:57 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%post
if [ -x /sbin/installkernel -a -r /boot/vmlinuz-$KERNELRELEASE -a -r /boot/System.map-$KERNELRELEASE ]; then
cp /boot/vmlinuz-$KERNELRELEASE /boot/.vmlinuz-$KERNELRELEASE-rpm
cp /boot/System.map-$KERNELRELEASE /boot/.System.map-$KERNELRELEASE-rpm
rm -f /boot/vmlinuz-$KERNELRELEASE /boot/System.map-$KERNELRELEASE
/sbin/installkernel $KERNELRELEASE /boot/.vmlinuz-$KERNELRELEASE-rpm /boot/.System.map-$KERNELRELEASE-rpm
rm -f /boot/.vmlinuz-$KERNELRELEASE-rpm /boot/.System.map-$KERNELRELEASE-rpm
fi
rpm-pkg: add generation of kernel-devel Change the spec file to generate a kernel-devel module allowing for compilation of external kernel modules. This patch requires a new minimum RPM level of 4.0.3. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-08 17:14:06 +00:00
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
%preun
if [ -x /sbin/new-kernel-pkg ]; then
new-kernel-pkg --remove $KERNELRELEASE --rminitrd --initrdfile=/boot/initramfs-$KERNELRELEASE.img
kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg The new-kernel-pkg script is only present when grubby is installed, but it may not always be the case. So if the script isn't present, attempt to use the kernel-install script as a fallback instead. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-11 18:15:24 +00:00
elif [ -x /usr/bin/kernel-install ]; then
kernel-install remove $KERNELRELEASE
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
fi
%postun
if [ -x /sbin/update-bootloader ]; then
/sbin/update-bootloader --remove $KERNELRELEASE
fi
%files
%defattr (-, root, root)
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
$M /lib/modules/$KERNELRELEASE
$M %exclude /lib/modules/$KERNELRELEASE/build
$M %exclude /lib/modules/$KERNELRELEASE/source
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
/boot/*
%files headers
%defattr (-, root, root)
/usr/include
kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled When CONFIG_MODULES is disabled, make rpm-pkg / binrpm-pkg fails with the following message: The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. Do not install modules in the case. Also, omit the devel package. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:07 +00:00
$S$M
$S$M %files devel
$S$M %defattr (-, root, root)
$S$M /usr/src/kernels/$KERNELRELEASE
$S$M /lib/modules/$KERNELRELEASE/build
$S$M /lib/modules/$KERNELRELEASE/source
kbuild: rpm-pkg: refactor mkspec with here doc The repeat of echo is unreadable. The here-document is a well-known device for such scripts. One difficulty is we have a bunch of PREBUILT conditionals that would split the here-document. My idea is to add "$S" annotatation to lines only for the source package spec file, then post-process it by sed. I hope it will make our life easier than repeat of "cat <<EOF ..." I confirmed this commit still produced the same (bin)kernel.spec as before. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-30 01:10:06 +00:00
EOF
Reference in New Issue Copy Permalink