linux/arch/um/drivers/virtio_uml.c

1458 lines
36 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Virtio vhost-user driver
*
* Copyright(c) 2019 Intel Corporation
*
* This driver allows virtio devices to be used over a vhost-user socket.
*
* Guest devices can be instantiated by kernel module or command line
* parameters. One device will be created for each parameter. Syntax:
*
* virtio_uml.device=<socket>:<virtio_id>[:<platform_id>]
* where:
* <socket> := vhost-user socket path to connect
* <virtio_id> := virtio device id (as in virtio_ids.h)
* <platform_id> := (optional) platform device id
*
* example:
* virtio_uml.device=/var/uml.socket:1
*
* Based on Virtio MMIO driver by Pawel Moll, copyright 2011-2014, ARM Ltd.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
#include <linux/virtio_ring.h>
#include <linux/time-internal.h>
#include <linux/virtio-uml.h>
#include <shared/as-layout.h>
#include <irq_kern.h>
#include <init.h>
#include <os.h>
#include "vhost_user.h"
#define MAX_SUPPORTED_QUEUE_SIZE 256
#define to_virtio_uml_device(_vdev) \
container_of(_vdev, struct virtio_uml_device, vdev)
struct virtio_uml_platform_data {
u32 virtio_device_id;
const char *socket_path;
struct work_struct conn_broken_wk;
struct platform_device *pdev;
};
struct virtio_uml_device {
struct virtio_device vdev;
struct platform_device *pdev;
struct virtio_uml_platform_data *pdata;
spinlock_t sock_lock;
int sock, req_fd, irq;
u64 features;
u64 protocol_features;
u8 status;
u8 registered:1;
u8 suspended:1;
u8 no_vq_suspend:1;
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
u8 config_changed_irq:1;
uint64_t vq_irq_vq_map;
int recv_rc;
};
struct virtio_uml_vq_info {
int kick_fd, call_fd;
char name[32];
bool suspended;
};
extern unsigned long long physmem_size, highmem;
#define vu_err(vu_dev, ...) dev_err(&(vu_dev)->pdev->dev, ##__VA_ARGS__)
/* Vhost-user protocol */
static int full_sendmsg_fds(int fd, const void *buf, unsigned int len,
const int *fds, unsigned int fds_num)
{
int rc;
do {
rc = os_sendmsg_fds(fd, buf, len, fds, fds_num);
if (rc > 0) {
buf += rc;
len -= rc;
fds = NULL;
fds_num = 0;
}
} while (len && (rc >= 0 || rc == -EINTR));
if (rc < 0)
return rc;
return 0;
}
static int full_read(int fd, void *buf, int len, bool abortable)
{
int rc;
if (!len)
return 0;
do {
rc = os_read_file(fd, buf, len);
if (rc > 0) {
buf += rc;
len -= rc;
}
} while (len && (rc > 0 || rc == -EINTR || (!abortable && rc == -EAGAIN)));
if (rc < 0)
return rc;
if (rc == 0)
return -ECONNRESET;
return 0;
}
static int vhost_user_recv_header(int fd, struct vhost_user_msg *msg)
{
return full_read(fd, msg, sizeof(msg->header), true);
}
static int vhost_user_recv(struct virtio_uml_device *vu_dev,
int fd, struct vhost_user_msg *msg,
size_t max_payload_size, bool wait)
{
size_t size;
int rc;
/*
* In virtio time-travel mode, we're handling all the vhost-user
* FDs by polling them whenever appropriate. However, we may get
* into a situation where we're sending out an interrupt message
* to a device (e.g. a net device) and need to handle a simulation
* time message while doing so, e.g. one that tells us to update
* our idea of how long we can run without scheduling.
*
* Thus, we need to not just read() from the given fd, but need
* to also handle messages for the simulation time - this function
* does that for us while waiting for the given fd to be readable.
*/
if (wait)
time_travel_wait_readable(fd);
rc = vhost_user_recv_header(fd, msg);
if (rc)
return rc;
size = msg->header.size;
if (size > max_payload_size)
return -EPROTO;
return full_read(fd, &msg->payload, size, false);
}
static void vhost_user_check_reset(struct virtio_uml_device *vu_dev,
int rc)
{
struct virtio_uml_platform_data *pdata = vu_dev->pdata;
if (rc != -ECONNRESET)
return;
if (!vu_dev->registered)
return;
virtio_break_device(&vu_dev->vdev);
schedule_work(&pdata->conn_broken_wk);
}
static int vhost_user_recv_resp(struct virtio_uml_device *vu_dev,
struct vhost_user_msg *msg,
size_t max_payload_size)
{
int rc = vhost_user_recv(vu_dev, vu_dev->sock, msg,
max_payload_size, true);
if (rc) {
vhost_user_check_reset(vu_dev, rc);
return rc;
}
if (msg->header.flags != (VHOST_USER_FLAG_REPLY | VHOST_USER_VERSION))
return -EPROTO;
return 0;
}
static int vhost_user_recv_u64(struct virtio_uml_device *vu_dev,
u64 *value)
{
struct vhost_user_msg msg;
int rc = vhost_user_recv_resp(vu_dev, &msg,
sizeof(msg.payload.integer));
if (rc)
return rc;
if (msg.header.size != sizeof(msg.payload.integer))
return -EPROTO;
*value = msg.payload.integer;
return 0;
}
static int vhost_user_recv_req(struct virtio_uml_device *vu_dev,
struct vhost_user_msg *msg,
size_t max_payload_size)
{
int rc = vhost_user_recv(vu_dev, vu_dev->req_fd, msg,
max_payload_size, false);
if (rc)
return rc;
if ((msg->header.flags & ~VHOST_USER_FLAG_NEED_REPLY) !=
VHOST_USER_VERSION)
return -EPROTO;
return 0;
}
static int vhost_user_send(struct virtio_uml_device *vu_dev,
bool need_response, struct vhost_user_msg *msg,
int *fds, size_t num_fds)
{
size_t size = sizeof(msg->header) + msg->header.size;
unsigned long flags;
bool request_ack;
int rc;
msg->header.flags |= VHOST_USER_VERSION;
/*
* The need_response flag indicates that we already need a response,
* e.g. to read the features. In these cases, don't request an ACK as
* it is meaningless. Also request an ACK only if supported.
*/
request_ack = !need_response;
if (!(vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_REPLY_ACK)))
request_ack = false;
if (request_ack)
msg->header.flags |= VHOST_USER_FLAG_NEED_REPLY;
spin_lock_irqsave(&vu_dev->sock_lock, flags);
rc = full_sendmsg_fds(vu_dev->sock, msg, size, fds, num_fds);
if (rc < 0)
goto out;
if (request_ack) {
uint64_t status;
rc = vhost_user_recv_u64(vu_dev, &status);
if (rc)
goto out;
if (status) {
vu_err(vu_dev, "slave reports error: %llu\n", status);
rc = -EIO;
goto out;
}
}
out:
spin_unlock_irqrestore(&vu_dev->sock_lock, flags);
return rc;
}
static int vhost_user_send_no_payload(struct virtio_uml_device *vu_dev,
bool need_response, u32 request)
{
struct vhost_user_msg msg = {
.header.request = request,
};
return vhost_user_send(vu_dev, need_response, &msg, NULL, 0);
}
static int vhost_user_send_no_payload_fd(struct virtio_uml_device *vu_dev,
u32 request, int fd)
{
struct vhost_user_msg msg = {
.header.request = request,
};
return vhost_user_send(vu_dev, false, &msg, &fd, 1);
}
static int vhost_user_send_u64(struct virtio_uml_device *vu_dev,
u32 request, u64 value)
{
struct vhost_user_msg msg = {
.header.request = request,
.header.size = sizeof(msg.payload.integer),
.payload.integer = value,
};
return vhost_user_send(vu_dev, false, &msg, NULL, 0);
}
static int vhost_user_set_owner(struct virtio_uml_device *vu_dev)
{
return vhost_user_send_no_payload(vu_dev, false, VHOST_USER_SET_OWNER);
}
static int vhost_user_get_features(struct virtio_uml_device *vu_dev,
u64 *features)
{
int rc = vhost_user_send_no_payload(vu_dev, true,
VHOST_USER_GET_FEATURES);
if (rc)
return rc;
return vhost_user_recv_u64(vu_dev, features);
}
static int vhost_user_set_features(struct virtio_uml_device *vu_dev,
u64 features)
{
return vhost_user_send_u64(vu_dev, VHOST_USER_SET_FEATURES, features);
}
static int vhost_user_get_protocol_features(struct virtio_uml_device *vu_dev,
u64 *protocol_features)
{
int rc = vhost_user_send_no_payload(vu_dev, true,
VHOST_USER_GET_PROTOCOL_FEATURES);
if (rc)
return rc;
return vhost_user_recv_u64(vu_dev, protocol_features);
}
static int vhost_user_set_protocol_features(struct virtio_uml_device *vu_dev,
u64 protocol_features)
{
return vhost_user_send_u64(vu_dev, VHOST_USER_SET_PROTOCOL_FEATURES,
protocol_features);
}
static void vhost_user_reply(struct virtio_uml_device *vu_dev,
struct vhost_user_msg *msg, int response)
{
struct vhost_user_msg reply = {
.payload.integer = response,
};
size_t size = sizeof(reply.header) + sizeof(reply.payload.integer);
int rc;
reply.header = msg->header;
reply.header.flags &= ~VHOST_USER_FLAG_NEED_REPLY;
reply.header.flags |= VHOST_USER_FLAG_REPLY;
reply.header.size = sizeof(reply.payload.integer);
rc = full_sendmsg_fds(vu_dev->req_fd, &reply, size, NULL, 0);
if (rc)
vu_err(vu_dev,
"sending reply to slave request failed: %d (size %zu)\n",
rc, size);
}
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
static irqreturn_t vu_req_read_message(struct virtio_uml_device *vu_dev,
struct time_travel_event *ev)
{
struct virtqueue *vq;
int response = 1;
struct {
struct vhost_user_msg msg;
u8 extra_payload[512];
} msg;
int rc;
irqreturn_t irq_rc = IRQ_NONE;
while (1) {
rc = vhost_user_recv_req(vu_dev, &msg.msg,
sizeof(msg.msg.payload) +
sizeof(msg.extra_payload));
if (rc)
break;
switch (msg.msg.header.request) {
case VHOST_USER_SLAVE_CONFIG_CHANGE_MSG:
vu_dev->config_changed_irq = true;
response = 0;
break;
case VHOST_USER_SLAVE_VRING_CALL:
virtio_device_for_each_vq((&vu_dev->vdev), vq) {
if (vq->index == msg.msg.payload.vring_state.index) {
response = 0;
vu_dev->vq_irq_vq_map |= BIT_ULL(vq->index);
break;
}
}
break;
case VHOST_USER_SLAVE_IOTLB_MSG:
/* not supported - VIRTIO_F_ACCESS_PLATFORM */
case VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG:
/* not supported - VHOST_USER_PROTOCOL_F_HOST_NOTIFIER */
default:
vu_err(vu_dev, "unexpected slave request %d\n",
msg.msg.header.request);
}
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
if (ev && !vu_dev->suspended)
time_travel_add_irq_event(ev);
if (msg.msg.header.flags & VHOST_USER_FLAG_NEED_REPLY)
vhost_user_reply(vu_dev, &msg.msg, response);
irq_rc = IRQ_HANDLED;
};
/* mask EAGAIN as we try non-blocking read until socket is empty */
vu_dev->recv_rc = (rc == -EAGAIN) ? 0 : rc;
return irq_rc;
}
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
static irqreturn_t vu_req_interrupt(int irq, void *data)
{
struct virtio_uml_device *vu_dev = data;
irqreturn_t ret = IRQ_HANDLED;
if (!um_irq_timetravel_handler_used())
ret = vu_req_read_message(vu_dev, NULL);
if (vu_dev->recv_rc) {
vhost_user_check_reset(vu_dev, vu_dev->recv_rc);
} else if (vu_dev->vq_irq_vq_map) {
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
struct virtqueue *vq;
virtio_device_for_each_vq((&vu_dev->vdev), vq) {
if (vu_dev->vq_irq_vq_map & BIT_ULL(vq->index))
vring_interrupt(0 /* ignored */, vq);
}
vu_dev->vq_irq_vq_map = 0;
} else if (vu_dev->config_changed_irq) {
virtio_config_changed(&vu_dev->vdev);
vu_dev->config_changed_irq = false;
}
return ret;
}
static void vu_req_interrupt_comm_handler(int irq, int fd, void *data,
struct time_travel_event *ev)
{
vu_req_read_message(data, ev);
}
static int vhost_user_init_slave_req(struct virtio_uml_device *vu_dev)
{
int rc, req_fds[2];
/* Use a pipe for slave req fd, SIGIO is not supported for eventfd */
rc = os_pipe(req_fds, true, true);
if (rc < 0)
return rc;
vu_dev->req_fd = req_fds[0];
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
rc = um_request_irq_tt(UM_IRQ_ALLOC, vu_dev->req_fd, IRQ_READ,
vu_req_interrupt, IRQF_SHARED,
vu_dev->pdev->name, vu_dev,
vu_req_interrupt_comm_handler);
if (rc < 0)
goto err_close;
vu_dev->irq = rc;
rc = vhost_user_send_no_payload_fd(vu_dev, VHOST_USER_SET_SLAVE_REQ_FD,
req_fds[1]);
if (rc)
goto err_free_irq;
goto out;
err_free_irq:
um_free_irq(vu_dev->irq, vu_dev);
err_close:
os_close_file(req_fds[0]);
out:
/* Close unused write end of request fds */
os_close_file(req_fds[1]);
return rc;
}
static int vhost_user_init(struct virtio_uml_device *vu_dev)
{
int rc = vhost_user_set_owner(vu_dev);
if (rc)
return rc;
rc = vhost_user_get_features(vu_dev, &vu_dev->features);
if (rc)
return rc;
if (vu_dev->features & BIT_ULL(VHOST_USER_F_PROTOCOL_FEATURES)) {
rc = vhost_user_get_protocol_features(vu_dev,
&vu_dev->protocol_features);
if (rc)
return rc;
vu_dev->protocol_features &= VHOST_USER_SUPPORTED_PROTOCOL_F;
rc = vhost_user_set_protocol_features(vu_dev,
vu_dev->protocol_features);
if (rc)
return rc;
}
if (vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_SLAVE_REQ)) {
rc = vhost_user_init_slave_req(vu_dev);
if (rc)
return rc;
}
return 0;
}
static void vhost_user_get_config(struct virtio_uml_device *vu_dev,
u32 offset, void *buf, u32 len)
{
u32 cfg_size = offset + len;
struct vhost_user_msg *msg;
size_t payload_size = sizeof(msg->payload.config) + cfg_size;
size_t msg_size = sizeof(msg->header) + payload_size;
int rc;
if (!(vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_CONFIG)))
return;
msg = kzalloc(msg_size, GFP_KERNEL);
if (!msg)
return;
msg->header.request = VHOST_USER_GET_CONFIG;
msg->header.size = payload_size;
msg->payload.config.offset = 0;
msg->payload.config.size = cfg_size;
rc = vhost_user_send(vu_dev, true, msg, NULL, 0);
if (rc) {
vu_err(vu_dev, "sending VHOST_USER_GET_CONFIG failed: %d\n",
rc);
goto free;
}
rc = vhost_user_recv_resp(vu_dev, msg, msg_size);
if (rc) {
vu_err(vu_dev,
"receiving VHOST_USER_GET_CONFIG response failed: %d\n",
rc);
goto free;
}
if (msg->header.size != payload_size ||
msg->payload.config.size != cfg_size) {
rc = -EPROTO;
vu_err(vu_dev,
"Invalid VHOST_USER_GET_CONFIG sizes (payload %d expected %zu, config %u expected %u)\n",
msg->header.size, payload_size,
msg->payload.config.size, cfg_size);
goto free;
}
memcpy(buf, msg->payload.config.payload + offset, len);
free:
kfree(msg);
}
static void vhost_user_set_config(struct virtio_uml_device *vu_dev,
u32 offset, const void *buf, u32 len)
{
struct vhost_user_msg *msg;
size_t payload_size = sizeof(msg->payload.config) + len;
size_t msg_size = sizeof(msg->header) + payload_size;
int rc;
if (!(vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_CONFIG)))
return;
msg = kzalloc(msg_size, GFP_KERNEL);
if (!msg)
return;
msg->header.request = VHOST_USER_SET_CONFIG;
msg->header.size = payload_size;
msg->payload.config.offset = offset;
msg->payload.config.size = len;
memcpy(msg->payload.config.payload, buf, len);
rc = vhost_user_send(vu_dev, false, msg, NULL, 0);
if (rc)
vu_err(vu_dev, "sending VHOST_USER_SET_CONFIG failed: %d\n",
rc);
kfree(msg);
}
static int vhost_user_init_mem_region(u64 addr, u64 size, int *fd_out,
struct vhost_user_mem_region *region_out)
{
unsigned long long mem_offset;
int rc = phys_mapping(addr, &mem_offset);
if (WARN(rc < 0, "phys_mapping of 0x%llx returned %d\n", addr, rc))
return -EFAULT;
*fd_out = rc;
region_out->guest_addr = addr;
region_out->user_addr = addr;
region_out->size = size;
region_out->mmap_offset = mem_offset;
/* Ensure mapping is valid for the entire region */
rc = phys_mapping(addr + size - 1, &mem_offset);
if (WARN(rc != *fd_out, "phys_mapping of 0x%llx failed: %d != %d\n",
addr + size - 1, rc, *fd_out))
return -EFAULT;
return 0;
}
static int vhost_user_set_mem_table(struct virtio_uml_device *vu_dev)
{
struct vhost_user_msg msg = {
.header.request = VHOST_USER_SET_MEM_TABLE,
.header.size = sizeof(msg.payload.mem_regions),
.payload.mem_regions.num = 1,
};
unsigned long reserved = uml_reserved - uml_physmem;
int fds[2];
int rc;
/*
* This is a bit tricky, see also the comment with setup_physmem().
*
* Essentially, setup_physmem() uses a file to mmap() our physmem,
* but the code and data we *already* have is omitted. To us, this
* is no difference, since they both become part of our address
* space and memory consumption. To somebody looking in from the
* outside, however, it is different because the part of our memory
* consumption that's already part of the binary (code/data) is not
* mapped from the file, so it's not visible to another mmap from
* the file descriptor.
*
* Thus, don't advertise this space to the vhost-user slave. This
* means that the slave will likely abort or similar when we give
* it an address from the hidden range, since it's not marked as
* a valid address, but at least that way we detect the issue and
* don't just have the slave read an all-zeroes buffer from the
* shared memory file, or write something there that we can never
* see (depending on the direction of the virtqueue traffic.)
*
* Since we usually don't want to use .text for virtio buffers,
* this effectively means that you cannot use
* 1) global variables, which are in the .bss and not in the shm
* file-backed memory
* 2) the stack in some processes, depending on where they have
* their stack (or maybe only no interrupt stack?)
*
* The stack is already not typically valid for DMA, so this isn't
* much of a restriction, but global variables might be encountered.
*
* It might be possible to fix it by copying around the data that's
* between bss_start and where we map the file now, but it's not
* something that you typically encounter with virtio drivers, so
* it didn't seem worthwhile.
*/
rc = vhost_user_init_mem_region(reserved, physmem_size - reserved,
&fds[0],
&msg.payload.mem_regions.regions[0]);
if (rc < 0)
return rc;
if (highmem) {
msg.payload.mem_regions.num++;
rc = vhost_user_init_mem_region(__pa(end_iomem), highmem,
&fds[1], &msg.payload.mem_regions.regions[1]);
if (rc < 0)
return rc;
}
return vhost_user_send(vu_dev, false, &msg, fds,
msg.payload.mem_regions.num);
}
static int vhost_user_set_vring_state(struct virtio_uml_device *vu_dev,
u32 request, u32 index, u32 num)
{
struct vhost_user_msg msg = {
.header.request = request,
.header.size = sizeof(msg.payload.vring_state),
.payload.vring_state.index = index,
.payload.vring_state.num = num,
};
return vhost_user_send(vu_dev, false, &msg, NULL, 0);
}
static int vhost_user_set_vring_num(struct virtio_uml_device *vu_dev,
u32 index, u32 num)
{
return vhost_user_set_vring_state(vu_dev, VHOST_USER_SET_VRING_NUM,
index, num);
}
static int vhost_user_set_vring_base(struct virtio_uml_device *vu_dev,
u32 index, u32 offset)
{
return vhost_user_set_vring_state(vu_dev, VHOST_USER_SET_VRING_BASE,
index, offset);
}
static int vhost_user_set_vring_addr(struct virtio_uml_device *vu_dev,
u32 index, u64 desc, u64 used, u64 avail,
u64 log)
{
struct vhost_user_msg msg = {
.header.request = VHOST_USER_SET_VRING_ADDR,
.header.size = sizeof(msg.payload.vring_addr),
.payload.vring_addr.index = index,
.payload.vring_addr.desc = desc,
.payload.vring_addr.used = used,
.payload.vring_addr.avail = avail,
.payload.vring_addr.log = log,
};
return vhost_user_send(vu_dev, false, &msg, NULL, 0);
}
static int vhost_user_set_vring_fd(struct virtio_uml_device *vu_dev,
u32 request, int index, int fd)
{
struct vhost_user_msg msg = {
.header.request = request,
.header.size = sizeof(msg.payload.integer),
.payload.integer = index,
};
if (index & ~VHOST_USER_VRING_INDEX_MASK)
return -EINVAL;
if (fd < 0) {
msg.payload.integer |= VHOST_USER_VRING_POLL_MASK;
return vhost_user_send(vu_dev, false, &msg, NULL, 0);
}
return vhost_user_send(vu_dev, false, &msg, &fd, 1);
}
static int vhost_user_set_vring_call(struct virtio_uml_device *vu_dev,
int index, int fd)
{
return vhost_user_set_vring_fd(vu_dev, VHOST_USER_SET_VRING_CALL,
index, fd);
}
static int vhost_user_set_vring_kick(struct virtio_uml_device *vu_dev,
int index, int fd)
{
return vhost_user_set_vring_fd(vu_dev, VHOST_USER_SET_VRING_KICK,
index, fd);
}
static int vhost_user_set_vring_enable(struct virtio_uml_device *vu_dev,
u32 index, bool enable)
{
if (!(vu_dev->features & BIT_ULL(VHOST_USER_F_PROTOCOL_FEATURES)))
return 0;
return vhost_user_set_vring_state(vu_dev, VHOST_USER_SET_VRING_ENABLE,
index, enable);
}
/* Virtio interface */
static bool vu_notify(struct virtqueue *vq)
{
struct virtio_uml_vq_info *info = vq->priv;
const uint64_t n = 1;
int rc;
if (info->suspended)
return true;
time_travel_propagate_time();
if (info->kick_fd < 0) {
struct virtio_uml_device *vu_dev;
vu_dev = to_virtio_uml_device(vq->vdev);
return vhost_user_set_vring_state(vu_dev, VHOST_USER_VRING_KICK,
vq->index, 0) == 0;
}
do {
rc = os_write_file(info->kick_fd, &n, sizeof(n));
} while (rc == -EINTR);
return !WARN(rc != sizeof(n), "write returned %d\n", rc);
}
static irqreturn_t vu_interrupt(int irq, void *opaque)
{
struct virtqueue *vq = opaque;
struct virtio_uml_vq_info *info = vq->priv;
uint64_t n;
int rc;
irqreturn_t ret = IRQ_NONE;
do {
rc = os_read_file(info->call_fd, &n, sizeof(n));
if (rc == sizeof(n))
ret |= vring_interrupt(irq, vq);
} while (rc == sizeof(n) || rc == -EINTR);
WARN(rc != -EAGAIN, "read returned %d\n", rc);
return ret;
}
static void vu_get(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
vhost_user_get_config(vu_dev, offset, buf, len);
}
static void vu_set(struct virtio_device *vdev, unsigned offset,
const void *buf, unsigned len)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
vhost_user_set_config(vu_dev, offset, buf, len);
}
static u8 vu_get_status(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
return vu_dev->status;
}
static void vu_set_status(struct virtio_device *vdev, u8 status)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
vu_dev->status = status;
}
static void vu_reset(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
vu_dev->status = 0;
}
static void vu_del_vq(struct virtqueue *vq)
{
struct virtio_uml_vq_info *info = vq->priv;
if (info->call_fd >= 0) {
struct virtio_uml_device *vu_dev;
vu_dev = to_virtio_uml_device(vq->vdev);
um_free_irq(vu_dev->irq, vq);
os_close_file(info->call_fd);
}
if (info->kick_fd >= 0)
os_close_file(info->kick_fd);
vring_del_virtqueue(vq);
kfree(info);
}
static void vu_del_vqs(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
struct virtqueue *vq, *n;
u64 features;
/* Note: reverse order as a workaround to a decoding bug in snabb */
list_for_each_entry_reverse(vq, &vdev->vqs, list)
WARN_ON(vhost_user_set_vring_enable(vu_dev, vq->index, false));
/* Ensure previous messages have been processed */
WARN_ON(vhost_user_get_features(vu_dev, &features));
list_for_each_entry_safe(vq, n, &vdev->vqs, list)
vu_del_vq(vq);
}
static int vu_setup_vq_call_fd(struct virtio_uml_device *vu_dev,
struct virtqueue *vq)
{
struct virtio_uml_vq_info *info = vq->priv;
int call_fds[2];
int rc;
/* no call FD needed/desired in this case */
if (vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS) &&
vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_SLAVE_REQ)) {
info->call_fd = -1;
return 0;
}
/* Use a pipe for call fd, since SIGIO is not supported for eventfd */
rc = os_pipe(call_fds, true, true);
if (rc < 0)
return rc;
info->call_fd = call_fds[0];
rc = um_request_irq(vu_dev->irq, info->call_fd, IRQ_READ,
vu_interrupt, IRQF_SHARED, info->name, vq);
if (rc < 0)
goto close_both;
rc = vhost_user_set_vring_call(vu_dev, vq->index, call_fds[1]);
if (rc)
goto release_irq;
goto out;
release_irq:
um_free_irq(vu_dev->irq, vq);
close_both:
os_close_file(call_fds[0]);
out:
/* Close (unused) write end of call fds */
os_close_file(call_fds[1]);
return rc;
}
static struct virtqueue *vu_setup_vq(struct virtio_device *vdev,
unsigned index, vq_callback_t *callback,
const char *name, bool ctx)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
struct platform_device *pdev = vu_dev->pdev;
struct virtio_uml_vq_info *info;
struct virtqueue *vq;
int num = MAX_SUPPORTED_QUEUE_SIZE;
int rc;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
rc = -ENOMEM;
goto error_kzalloc;
}
snprintf(info->name, sizeof(info->name), "%s.%d-%s", pdev->name,
pdev->id, name);
vq = vring_create_virtqueue(index, num, PAGE_SIZE, vdev, true, true,
ctx, vu_notify, callback, info->name);
if (!vq) {
rc = -ENOMEM;
goto error_create;
}
vq->priv = info;
vq->num_max = num;
num = virtqueue_get_vring_size(vq);
if (vu_dev->protocol_features &
BIT_ULL(VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS)) {
info->kick_fd = -1;
} else {
rc = os_eventfd(0, 0);
if (rc < 0)
goto error_kick;
info->kick_fd = rc;
}
rc = vu_setup_vq_call_fd(vu_dev, vq);
if (rc)
goto error_call;
rc = vhost_user_set_vring_num(vu_dev, index, num);
if (rc)
goto error_setup;
rc = vhost_user_set_vring_base(vu_dev, index, 0);
if (rc)
goto error_setup;
rc = vhost_user_set_vring_addr(vu_dev, index,
virtqueue_get_desc_addr(vq),
virtqueue_get_used_addr(vq),
virtqueue_get_avail_addr(vq),
(u64) -1);
if (rc)
goto error_setup;
return vq;
error_setup:
if (info->call_fd >= 0) {
um_free_irq(vu_dev->irq, vq);
os_close_file(info->call_fd);
}
error_call:
if (info->kick_fd >= 0)
os_close_file(info->kick_fd);
error_kick:
vring_del_virtqueue(vq);
error_create:
kfree(info);
error_kzalloc:
return ERR_PTR(rc);
}
static int vu_find_vqs(struct virtio_device *vdev, unsigned nvqs,
struct virtqueue *vqs[], vq_callback_t *callbacks[],
const char * const names[], const bool *ctx,
struct irq_affinity *desc)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
int i, queue_idx = 0, rc;
struct virtqueue *vq;
um: time-travel: rework interrupt handling in ext mode In external time-travel mode, where time is controlled via the controller application socket, interrupt handling is a little tricky. For example on virtio, the following happens: * we receive a message (that requires an ACK) on the vhost-user socket * we add a time-travel event to handle the interrupt (this causes communication on the time socket) * we ACK the original vhost-user message * we then handle the interrupt once the event is triggered This protocol ensures that the sender of the interrupt only continues to run in the simulation when the time-travel event has been added. So far, this was only done in the virtio driver, but it was actually wrong, because only virtqueue interrupts were handled this way, and config change interrupts were handled immediately. Additionally, the messages were actually handled in the real Linux interrupt handler, but Linux interrupt handlers are part of the simulation and shouldn't run while there's no time event. To really do this properly and only handle all kinds of interrupts in the time-travel event when we are scheduled to run in the simulation, rework this to plug in to the lower interrupt layers in UML directly: Add a um_request_irq_tt() function that let's a time-travel aware driver request an interrupt with an additional timetravel_handler() that is called outside of the context of the simulation, to handle the message only. It then adds an event to the time-travel calendar if necessary, and no "real" Linux code runs outside of the time simulation. This also hooks in with suspend/resume properly now, since this new timetravel_handler() can run while Linux is suspended and interrupts are disabled, and decide to wake up (or not) the system based on the message it received. Importantly in this case, it ACKs the message before the system even resumes and interrupts are re-enabled, thus allowing the simulation to progress properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-15 09:52:24 +00:00
/* not supported for now */
if (WARN_ON(nvqs > 64))
return -EINVAL;
rc = vhost_user_set_mem_table(vu_dev);
if (rc)
return rc;
for (i = 0; i < nvqs; ++i) {
if (!names[i]) {
vqs[i] = NULL;
continue;
}
vqs[i] = vu_setup_vq(vdev, queue_idx++, callbacks[i], names[i],
ctx ? ctx[i] : false);
if (IS_ERR(vqs[i])) {
rc = PTR_ERR(vqs[i]);
goto error_setup;
}
}
list_for_each_entry(vq, &vdev->vqs, list) {
struct virtio_uml_vq_info *info = vq->priv;
if (info->kick_fd >= 0) {
rc = vhost_user_set_vring_kick(vu_dev, vq->index,
info->kick_fd);
if (rc)
goto error_setup;
}
rc = vhost_user_set_vring_enable(vu_dev, vq->index, true);
if (rc)
goto error_setup;
}
return 0;
error_setup:
vu_del_vqs(vdev);
return rc;
}
static u64 vu_get_features(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
return vu_dev->features;
}
static int vu_finalize_features(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
u64 supported = vdev->features & VHOST_USER_SUPPORTED_F;
vring_transport_features(vdev);
vu_dev->features = vdev->features | supported;
return vhost_user_set_features(vu_dev, vu_dev->features);
}
static const char *vu_bus_name(struct virtio_device *vdev)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
return vu_dev->pdev->name;
}
static const struct virtio_config_ops virtio_uml_config_ops = {
.get = vu_get,
.set = vu_set,
.get_status = vu_get_status,
.set_status = vu_set_status,
.reset = vu_reset,
.find_vqs = vu_find_vqs,
.del_vqs = vu_del_vqs,
.get_features = vu_get_features,
.finalize_features = vu_finalize_features,
.bus_name = vu_bus_name,
};
static void virtio_uml_release_dev(struct device *d)
{
struct virtio_device *vdev =
container_of(d, struct virtio_device, dev);
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
time_travel_propagate_time();
/* might not have been opened due to not negotiating the feature */
if (vu_dev->req_fd >= 0) {
um_free_irq(vu_dev->irq, vu_dev);
os_close_file(vu_dev->req_fd);
}
os_close_file(vu_dev->sock);
kfree(vu_dev);
}
void virtio_uml_set_no_vq_suspend(struct virtio_device *vdev,
bool no_vq_suspend)
{
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
if (WARN_ON(vdev->config != &virtio_uml_config_ops))
return;
vu_dev->no_vq_suspend = no_vq_suspend;
dev_info(&vdev->dev, "%sabled VQ suspend\n",
no_vq_suspend ? "dis" : "en");
}
static void vu_of_conn_broken(struct work_struct *wk)
{
/*
* We can't remove the device from the devicetree so the only thing we
* can do is warn.
*/
WARN_ON(1);
}
/* Platform device */
static struct virtio_uml_platform_data *
virtio_uml_create_pdata(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct virtio_uml_platform_data *pdata;
int ret;
if (!np)
return ERR_PTR(-EINVAL);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
INIT_WORK(&pdata->conn_broken_wk, vu_of_conn_broken);
pdata->pdev = pdev;
ret = of_property_read_string(np, "socket-path", &pdata->socket_path);
if (ret)
return ERR_PTR(ret);
ret = of_property_read_u32(np, "virtio-device-id",
&pdata->virtio_device_id);
if (ret)
return ERR_PTR(ret);
return pdata;
}
static int virtio_uml_probe(struct platform_device *pdev)
{
struct virtio_uml_platform_data *pdata = pdev->dev.platform_data;
struct virtio_uml_device *vu_dev;
int rc;
if (!pdata) {
pdata = virtio_uml_create_pdata(pdev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
vu_dev = kzalloc(sizeof(*vu_dev), GFP_KERNEL);
if (!vu_dev)
return -ENOMEM;
vu_dev->pdata = pdata;
vu_dev->vdev.dev.parent = &pdev->dev;
vu_dev->vdev.dev.release = virtio_uml_release_dev;
vu_dev->vdev.config = &virtio_uml_config_ops;
vu_dev->vdev.id.device = pdata->virtio_device_id;
vu_dev->vdev.id.vendor = VIRTIO_DEV_ANY_ID;
vu_dev->pdev = pdev;
vu_dev->req_fd = -1;
time_travel_propagate_time();
do {
rc = os_connect_socket(pdata->socket_path);
} while (rc == -EINTR);
if (rc < 0)
goto error_free;
vu_dev->sock = rc;
spin_lock_init(&vu_dev->sock_lock);
rc = vhost_user_init(vu_dev);
if (rc)
goto error_init;
platform_set_drvdata(pdev, vu_dev);
device_set_wakeup_capable(&vu_dev->vdev.dev, true);
rc = register_virtio_device(&vu_dev->vdev);
if (rc)
put_device(&vu_dev->vdev.dev);
vu_dev->registered = 1;
return rc;
error_init:
os_close_file(vu_dev->sock);
error_free:
kfree(vu_dev);
return rc;
}
static int virtio_uml_remove(struct platform_device *pdev)
{
struct virtio_uml_device *vu_dev = platform_get_drvdata(pdev);
unregister_virtio_device(&vu_dev->vdev);
return 0;
}
/* Command line device list */
static void vu_cmdline_release_dev(struct device *d)
{
}
static struct device vu_cmdline_parent = {
.init_name = "virtio-uml-cmdline",
.release = vu_cmdline_release_dev,
};
static bool vu_cmdline_parent_registered;
static int vu_cmdline_id;
static int vu_unregister_cmdline_device(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct virtio_uml_platform_data *pdata = pdev->dev.platform_data;
kfree(pdata->socket_path);
platform_device_unregister(pdev);
return 0;
}
static void vu_conn_broken(struct work_struct *wk)
{
struct virtio_uml_platform_data *pdata;
pdata = container_of(wk, struct virtio_uml_platform_data, conn_broken_wk);
vu_unregister_cmdline_device(&pdata->pdev->dev, NULL);
}
static int vu_cmdline_set(const char *device, const struct kernel_param *kp)
{
const char *ids = strchr(device, ':');
unsigned int virtio_device_id;
int processed, consumed, err;
char *socket_path;
struct virtio_uml_platform_data pdata, *ppdata;
struct platform_device *pdev;
if (!ids || ids == device)
return -EINVAL;
processed = sscanf(ids, ":%u%n:%d%n",
&virtio_device_id, &consumed,
&vu_cmdline_id, &consumed);
if (processed < 1 || ids[consumed])
return -EINVAL;
if (!vu_cmdline_parent_registered) {
err = device_register(&vu_cmdline_parent);
if (err) {
pr_err("Failed to register parent device!\n");
put_device(&vu_cmdline_parent);
return err;
}
vu_cmdline_parent_registered = true;
}
socket_path = kmemdup_nul(device, ids - device, GFP_KERNEL);
if (!socket_path)
return -ENOMEM;
pdata.virtio_device_id = (u32) virtio_device_id;
pdata.socket_path = socket_path;
pr_info("Registering device virtio-uml.%d id=%d at %s\n",
vu_cmdline_id, virtio_device_id, socket_path);
pdev = platform_device_register_data(&vu_cmdline_parent, "virtio-uml",
vu_cmdline_id++, &pdata,
sizeof(pdata));
err = PTR_ERR_OR_ZERO(pdev);
if (err)
goto free;
ppdata = pdev->dev.platform_data;
ppdata->pdev = pdev;
INIT_WORK(&ppdata->conn_broken_wk, vu_conn_broken);
return 0;
free:
kfree(socket_path);
return err;
}
static int vu_cmdline_get_device(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct virtio_uml_platform_data *pdata = pdev->dev.platform_data;
char *buffer = data;
unsigned int len = strlen(buffer);
snprintf(buffer + len, PAGE_SIZE - len, "%s:%d:%d\n",
pdata->socket_path, pdata->virtio_device_id, pdev->id);
return 0;
}
static int vu_cmdline_get(char *buffer, const struct kernel_param *kp)
{
buffer[0] = '\0';
if (vu_cmdline_parent_registered)
device_for_each_child(&vu_cmdline_parent, buffer,
vu_cmdline_get_device);
return strlen(buffer) + 1;
}
static const struct kernel_param_ops vu_cmdline_param_ops = {
.set = vu_cmdline_set,
.get = vu_cmdline_get,
};
device_param_cb(device, &vu_cmdline_param_ops, NULL, S_IRUSR);
__uml_help(vu_cmdline_param_ops,
"virtio_uml.device=<socket>:<virtio_id>[:<platform_id>]\n"
" Configure a virtio device over a vhost-user socket.\n"
" See virtio_ids.h for a list of possible virtio device id values.\n"
" Optionally use a specific platform_device id.\n\n"
);
static void vu_unregister_cmdline_devices(void)
{
if (vu_cmdline_parent_registered) {
device_for_each_child(&vu_cmdline_parent, NULL,
vu_unregister_cmdline_device);
device_unregister(&vu_cmdline_parent);
vu_cmdline_parent_registered = false;
}
}
/* Platform driver */
static const struct of_device_id virtio_uml_match[] = {
{ .compatible = "virtio,uml", },
{ }
};
MODULE_DEVICE_TABLE(of, virtio_uml_match);
static int virtio_uml_suspend(struct platform_device *pdev, pm_message_t state)
{
struct virtio_uml_device *vu_dev = platform_get_drvdata(pdev);
if (!vu_dev->no_vq_suspend) {
struct virtqueue *vq;
virtio_device_for_each_vq((&vu_dev->vdev), vq) {
struct virtio_uml_vq_info *info = vq->priv;
info->suspended = true;
vhost_user_set_vring_enable(vu_dev, vq->index, false);
}
}
if (!device_may_wakeup(&vu_dev->vdev.dev)) {
vu_dev->suspended = true;
return 0;
}
return irq_set_irq_wake(vu_dev->irq, 1);
}
static int virtio_uml_resume(struct platform_device *pdev)
{
struct virtio_uml_device *vu_dev = platform_get_drvdata(pdev);
if (!vu_dev->no_vq_suspend) {
struct virtqueue *vq;
virtio_device_for_each_vq((&vu_dev->vdev), vq) {
struct virtio_uml_vq_info *info = vq->priv;
info->suspended = false;
vhost_user_set_vring_enable(vu_dev, vq->index, true);
}
}
vu_dev->suspended = false;
if (!device_may_wakeup(&vu_dev->vdev.dev))
return 0;
return irq_set_irq_wake(vu_dev->irq, 0);
}
static struct platform_driver virtio_uml_driver = {
.probe = virtio_uml_probe,
.remove = virtio_uml_remove,
.driver = {
.name = "virtio-uml",
.of_match_table = virtio_uml_match,
},
.suspend = virtio_uml_suspend,
.resume = virtio_uml_resume,
};
static int __init virtio_uml_init(void)
{
return platform_driver_register(&virtio_uml_driver);
}
static void __exit virtio_uml_exit(void)
{
platform_driver_unregister(&virtio_uml_driver);
vu_unregister_cmdline_devices();
}
module_init(virtio_uml_init);
module_exit(virtio_uml_exit);
__uml_exitcall(virtio_uml_exit);
MODULE_DESCRIPTION("UML driver for vhost-user virtio devices");
MODULE_LICENSE("GPL");