leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
linux/arch/arm/configs/mxs_defconfig

175 lines
3.9 KiB
Plaintext
Raw Permalink Normal View History

ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_SYSVIPC=y
ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=y According to https://www.kernel.org/doc/html/latest/timers/no_hz.html, CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer kernels, so let's reflect that in the 32-bit ARM defconfigs. Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-25 16:20:35 +00:00
CONFIG_NO_HZ_IDLE=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_HIGH_RES_TIMERS=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 14:13:50 +00:00
CONFIG_PREEMPT_VOLUNTARY=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
ARM: mxs_defconfig: Enable CONFIG_CGROUPS In order to support systemd we need to enable CONFIG_CGROUPS. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-14 15:13:49 +00:00
CONFIG_CGROUPS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
ARM: mxs_defconfig: Enable initramfs support This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-25 11:24:00 +00:00
CONFIG_BLK_DEV_INITRD=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_PERF_EVENTS=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 14:13:50 +00:00
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MXS=y
CONFIG_AEABI=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 12:47:57 +00:00
# CONFIG_COMPAT_BRK is not set
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CAN=m
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT Newer versions of udev (such as 182) requires CONFIG_DEVTMPFS_MOUNT to be selected, otherwise we get a stuck console: Starting udev Starting Bootlog daemon: bootlogd: cannot deduce real console device Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-17 01:32:04 +00:00
CONFIG_DEVTMPFS_MOUNT=y
ARM: mxs: Let GPMI driver be built by default Let GPMI driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-21 03:20:13 +00:00
CONFIG_MTD=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
ARM: mxs_defconfig: Add SPI and LRADC support Add SPI and LRADC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-27 16:23:29 +00:00
CONFIG_MTD_DATAFLASH=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 15:47:44 +00:00
CONFIG_MTD_RAW_NAND=y
ARM: mxs: Let GPMI driver be built by default Let GPMI driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-21 03:20:13 +00:00
CONFIG_MTD_NAND_GPMI_NAND=y
ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80) These defconfigs contain the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-01 06:26:36 +00:00
CONFIG_MTD_SPI_NOR=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_NETDEVICES=y
CONFIG_ENC28J60=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_ICPLUS_PHY=y
CONFIG_MICREL_PHY=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig So keep it in sync to help further changes in defconfig. The explanation for removing the Kconfig symbols: CONFIG_FHANDLE=y: verified that it is still selected selected CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore CONFIG_NVMEM=y: verified that it is still selected CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now CONFIG_TIMER_STATS=y: does not exist anymore Boot tested on a imx28evk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16 17:10:09 +00:00
CONFIG_REALTEK_PHY=y
CONFIG_SMSC_PHY=y
ARM: defconfig: reorder defconfig files The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-11 13:56:36 +00:00
CONFIG_CAN_FLEXCAN=m
ARM: mxs_defconfig: Cleanup mxs_defconfig Generate mxs_defconfig by doing: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig No functional change. The goal here is to cleanup mxs_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 12:15:54 +00:00
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
# CONFIG_WLAN is not set
ARM: mxs_defconfig: Build CONFIG_INPUT_EVDEV as built-in Build CONFIG_INPUT_EVDEV as a built-in driver, as it makes easier to test the LRADC touchscreen driver, for example, by using the 'evtest' tool. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-08 15:36:43 +00:00
CONFIG_INPUT_EVDEV=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
ARM: mxs_defconfig: Re-enable MXS LRADC The MXS LRADC driver left staging and has been split. So re-enable the driver and remove the obsolete entries. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-14 15:13:50 +00:00
CONFIG_TOUCHSCREEN_MXS_LRADC=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: mxs_defconfig: Let AUART driver be built by default Let AUART driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-06-15 11:32:30 +00:00
CONFIG_SERIAL_MXS_AUART=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C_COMPAT is not set
ARM: mx28: Let audio support be built by default Let audio support be built by default. As sgtl5000 codec is connected via I2C, let MXS I2C driver also be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-16 18:51:31 +00:00
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MXS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_SPI=y
CONFIG_SPI_GPIO=m
ARM: mxs_defconfig: Add SPI and LRADC support Add SPI and LRADC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-27 16:23:29 +00:00
CONFIG_SPI_MXS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
ARM: mxs_defconfig: Select watchdog driver Select watchdog driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-01 12:42:33 +00:00
CONFIG_WATCHDOG=y
CONFIG_STMP3XXX_RTC_WATCHDOG=y
ARM: mxs_defconfig: Re-enable MXS LRADC The MXS LRADC driver left staging and has been split. So re-enable the driver and remove the obsolete entries. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-14 15:13:50 +00:00
CONFIG_MFD_MXS_LRADC=y
ARM: mx28: Let audio support be built by default Let audio support be built by default. As sgtl5000 codec is connected via I2C, let MXS I2C driver also be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-16 18:51:31 +00:00
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: mxs_defconfig: use MXSFB DRM driver Use the the DRM driver for MXSFB LCD controller (used in i.MX23/ i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be removed. Note that this does not remove CONFIG_FB. CONFIG_FB gets selected implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-12 10:59:41 +00:00
CONFIG_DRM=y
ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G imx23-evk and imx28-evk boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-20 20:39:20 +00:00
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
ARM: mxs_defconfig: use MXSFB DRM driver Use the the DRM driver for MXSFB LCD controller (used in i.MX23/ i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be removed. Note that this does not remove CONFIG_FB. CONFIG_FB gets selected implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-12 10:59:41 +00:00
CONFIG_DRM_MXSFB=y
ARM: mxs_defconfig: Enable the framebuffer Currently, when booting Linux on a imx28-evk board there is no display activity. Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS, CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G, CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO, CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8 and CONFIG_FONT_8x16. Based on commit c54467482ffd ("ARM: imx_v6_v7_defconfig: enable fb"). Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-21 16:45:05 +00:00
CONFIG_FB=y
ARM: mxs_defconfig: use MXSFB DRM driver Use the the DRM driver for MXSFB LCD controller (used in i.MX23/ i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be removed. Note that this does not remove CONFIG_FB. CONFIG_FB gets selected implicity by CONFIG_DRM/CONFIG_DRM_KMS_FB_HELPER. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-12 10:59:41 +00:00
CONFIG_FB_MODE_HELPERS=y
ARM: mxs_defconfig: Add framebuffer support Add framebuffer support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-09 21:16:46 +00:00
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_LOGO=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
ARM: mxs_defconfig: Enable USB host Enable USB host. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-06 04:43:19 +00:00
CONFIG_USB=y
ARM: mxs_defconfig: Make USB host functional again commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST. Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again. Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-27 17:03:58 +00:00
CONFIG_USB_EHCI_HCD=y
ARM: mxs_defconfig: Cleanup mxs_defconfig Generate mxs_defconfig by doing: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig No functional change. The goal here is to cleanup mxs_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 12:15:54 +00:00
CONFIG_USB_STORAGE=y
ARM: mxs_defconfig: Enable USB host Enable USB host. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-06 04:43:19 +00:00
CONFIG_USB_CHIPIDEA=y
ARM: mxs_defconfig: Add CHIPIDEA_UDC support Generated by doing: make mxs_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-30 14:22:30 +00:00
CONFIG_USB_CHIPIDEA_UDC=y
ARM: mxs_defconfig: Enable USB host Enable USB host. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-06 04:43:19 +00:00
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_MXS_PHY=y
ARM: mxs_defconfig: Add CHIPIDEA_UDC support Generated by doing: make mxs_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-30 14:22:30 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_MMC=y
CONFIG_MMC_MXS=y
ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support Add LED, PWM and MTD_CHAR support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-06 16:59:06 +00:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
ARM: mxs_defconfig: Change CONFIG_RTC_CLASS 'm' to 'y' The patch fixes the warning below. arch/arm/configs/mxs_defconfig:92:warning: symbol value 'm' invalid for RTC_CLASS Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-25 13:55:38 +00:00
CONFIG_RTC_CLASS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_RTC_DRV_DS1307=m
ARM: mxs_defconfig: Enable RTC driver Let RTC driver driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-04 16:37:50 +00:00
CONFIG_RTC_DRV_STMP=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_DMADEVICES=y
CONFIG_MXS_DMA=y
ARM: mxs_defconfig: Add SPI and LRADC support Add SPI and LRADC support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-27 16:23:29 +00:00
CONFIG_IIO=y
ARM: mxs_defconfig: Re-enable MXS LRADC The MXS LRADC driver left staging and has been split. So re-enable the driver and remove the obsolete entries. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-14 15:13:50 +00:00
CONFIG_MXS_LRADC_ADC=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig So keep it in sync to help further changes in defconfig. The explanation for removing the Kconfig symbols: CONFIG_FHANDLE=y: verified that it is still selected selected CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore CONFIG_NVMEM=y: verified that it is still selected CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now CONFIG_TIMER_STATS=y: does not exist anymore Boot tested on a imx28evk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16 17:10:09 +00:00
CONFIG_IIO_SYSFS_TRIGGER=y
ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support Add LED, PWM and MTD_CHAR support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-06 16:59:06 +00:00
CONFIG_PWM=y
CONFIG_PWM_MXS=y
ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP Select the mxs ocotp driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-30 14:35:08 +00:00
CONFIG_NVMEM_MXS_OCOTP=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_EXT4_FS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
# CONFIG_DNOTIFY is not set
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
ARM: mxs_defconfig: Add VFAT support Select CONFIG_VFAT_FS by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-06 22:09:46 +00:00
CONFIG_VFAT_FS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
ARM: mxs: Update mxs_defconfig Regenerate the mxs_defconfig to match recent kernel using the following commands: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig Then enable these features: - MTD block access - UBI and UBIFS - JFFS2 - EXT2 and EXT4 - AT24 EEPROM support - Support for most of the SPI flashes - Support for ethernet PHYs that are usually used on mxs designs Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-21 02:07:31 +00:00
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
ARM: mxs_defconfig: Improve USB related support Select the following USB related options: - USB Ethernet adapter (needed for mx23-olinuxino) - Native language support (needed for mounting USB pen drives, for example) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-07 17:16:23 +00:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 14:13:50 +00:00
CONFIG_CRYPTO_DEV_MXS_DCP=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC7=m
CONFIG_FONTS=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_PRINTK_TIME=y
ARM: refresh defconfig files A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20 12:47:57 +00:00
CONFIG_DEBUG_KERNEL=y
ARM: defconfig: reorder defconfig files The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-11 13:56:36 +00:00
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_FRAME_WARN=2048
ARM: mxs_defconfig: Cleanup mxs_defconfig Generate mxs_defconfig by doing: make mxs_defconfig make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig No functional change. The goal here is to cleanup mxs_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-30 12:15:54 +00:00
CONFIG_MAGIC_SYSRQ=y
ARM: mxs_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/mxs_defconfig So keep it in sync to help further changes in defconfig. The explanation for removing the Kconfig symbols: CONFIG_FHANDLE=y: verified that it is still selected selected CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore CONFIG_NVMEM=y: verified that it is still selected CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now CONFIG_TIMER_STATS=y: does not exist anymore Boot tested on a imx28evk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16 17:10:09 +00:00
CONFIG_SOFTLOCKUP_DETECTOR=y
ARM: configs: add defconfig for mach-mxs Covers MX23, MX28 and STMP378x. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-29 13:06:40 +00:00
CONFIG_PROVE_LOCKING=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
Reference in New Issue Copy Permalink