Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-25 05:32:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
ffcd06b6d1
linux/drivers/devfreq/rk3399_dmc.c
Uwe Kleine-König 8eba5b6934 PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2024-05-08 23:53:08 +09:00

489 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd.
* Author: Lin Huang <hl@rock-chips.com>
*/
#include <linux/arm-smccc.h>
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/devfreq.h>
#include <linux/devfreq-event.h>
#include <linux/interrupt.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/rwsem.h>
#include <linux/suspend.h>
#include <soc/rockchip/pm_domains.h>
#include <soc/rockchip/rockchip_grf.h>
#include <soc/rockchip/rk3399_grf.h>
#include <soc/rockchip/rockchip_sip.h>
#define NS_TO_CYCLE(NS, MHz) (((NS) * (MHz)) / NSEC_PER_USEC)
#define RK3399_SET_ODT_PD_0_SR_IDLE GENMASK(7, 0)
#define RK3399_SET_ODT_PD_0_SR_MC_GATE_IDLE GENMASK(15, 8)
#define RK3399_SET_ODT_PD_0_STANDBY_IDLE GENMASK(31, 16)
#define RK3399_SET_ODT_PD_1_PD_IDLE GENMASK(11, 0)
#define RK3399_SET_ODT_PD_1_SRPD_LITE_IDLE GENMASK(27, 16)
#define RK3399_SET_ODT_PD_2_ODT_ENABLE BIT(0)
struct rk3399_dmcfreq {
struct device *dev;
struct devfreq *devfreq;
struct devfreq_dev_profile profile;
struct devfreq_simple_ondemand_data ondemand_data;
struct clk *dmc_clk;
struct devfreq_event_dev *edev;
struct mutex lock;
struct regulator *vdd_center;
struct regmap *regmap_pmu;
unsigned long rate, target_rate;
unsigned long volt, target_volt;
unsigned int odt_dis_freq;
unsigned int pd_idle_ns;
unsigned int sr_idle_ns;
unsigned int sr_mc_gate_idle_ns;
unsigned int srpd_lite_idle_ns;
unsigned int standby_idle_ns;
unsigned int ddr3_odt_dis_freq;
unsigned int lpddr3_odt_dis_freq;
unsigned int lpddr4_odt_dis_freq;
unsigned int pd_idle_dis_freq;
unsigned int sr_idle_dis_freq;
unsigned int sr_mc_gate_idle_dis_freq;
unsigned int srpd_lite_idle_dis_freq;
unsigned int standby_idle_dis_freq;
};
static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
u32 flags)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
struct dev_pm_opp *opp;
unsigned long old_clk_rate = dmcfreq->rate;
unsigned long target_volt, target_rate;
unsigned int ddrcon_mhz;
struct arm_smccc_res res;
int err;
u32 odt_pd_arg0 = 0;
u32 odt_pd_arg1 = 0;
u32 odt_pd_arg2 = 0;
opp = devfreq_recommended_opp(dev, freq, flags);
if (IS_ERR(opp))
return PTR_ERR(opp);
target_rate = dev_pm_opp_get_freq(opp);
target_volt = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);
if (dmcfreq->rate == target_rate)
return 0;
mutex_lock(&dmcfreq->lock);
/*
* Ensure power-domain transitions don't interfere with ARM Trusted
* Firmware power-domain idling.
*/
err = rockchip_pmu_block();
if (err) {
dev_err(dev, "Failed to block PMU: %d\n", err);
goto out_unlock;
}
/*
* Some idle parameters may be based on the DDR controller clock, which
* is half of the DDR frequency.
* pd_idle and standby_idle are based on the controller clock cycle.
* sr_idle_cycle, sr_mc_gate_idle_cycle, and srpd_lite_idle_cycle
* are based on the 1024 controller clock cycle
*/
ddrcon_mhz = target_rate / USEC_PER_SEC / 2;
u32p_replace_bits(&odt_pd_arg1,
NS_TO_CYCLE(dmcfreq->pd_idle_ns, ddrcon_mhz),
RK3399_SET_ODT_PD_1_PD_IDLE);
u32p_replace_bits(&odt_pd_arg0,
NS_TO_CYCLE(dmcfreq->standby_idle_ns, ddrcon_mhz),
RK3399_SET_ODT_PD_0_STANDBY_IDLE);
u32p_replace_bits(&odt_pd_arg0,
DIV_ROUND_UP(NS_TO_CYCLE(dmcfreq->sr_idle_ns,
ddrcon_mhz), 1024),
RK3399_SET_ODT_PD_0_SR_IDLE);
u32p_replace_bits(&odt_pd_arg0,
DIV_ROUND_UP(NS_TO_CYCLE(dmcfreq->sr_mc_gate_idle_ns,
ddrcon_mhz), 1024),
RK3399_SET_ODT_PD_0_SR_MC_GATE_IDLE);
u32p_replace_bits(&odt_pd_arg1,
DIV_ROUND_UP(NS_TO_CYCLE(dmcfreq->srpd_lite_idle_ns,
ddrcon_mhz), 1024),
RK3399_SET_ODT_PD_1_SRPD_LITE_IDLE);
if (dmcfreq->regmap_pmu) {
if (target_rate >= dmcfreq->sr_idle_dis_freq)
odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_SR_IDLE;
if (target_rate >= dmcfreq->sr_mc_gate_idle_dis_freq)
odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_SR_MC_GATE_IDLE;
if (target_rate >= dmcfreq->standby_idle_dis_freq)
odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_STANDBY_IDLE;
if (target_rate >= dmcfreq->pd_idle_dis_freq)
odt_pd_arg1 &= ~RK3399_SET_ODT_PD_1_PD_IDLE;
if (target_rate >= dmcfreq->srpd_lite_idle_dis_freq)
odt_pd_arg1 &= ~RK3399_SET_ODT_PD_1_SRPD_LITE_IDLE;
if (target_rate >= dmcfreq->odt_dis_freq)
odt_pd_arg2 |= RK3399_SET_ODT_PD_2_ODT_ENABLE;
/*
* This makes a SMC call to the TF-A to set the DDR PD
* (power-down) timings and to enable or disable the
* ODT (on-die termination) resistors.
*/
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, odt_pd_arg0, odt_pd_arg1,
ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD, odt_pd_arg2,
0, 0, 0, &res);
}
/*
* If frequency scaling from low to high, adjust voltage first.
* If frequency scaling from high to low, adjust frequency first.
*/
if (old_clk_rate < target_rate) {
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
target_volt);
if (err) {
dev_err(dev, "Cannot set voltage %lu uV\n",
target_volt);
goto out;
}
}
err = clk_set_rate(dmcfreq->dmc_clk, target_rate);
if (err) {
dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
err);
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
dmcfreq->volt);
goto out;
}
/*
* Check the dpll rate,
* There only two result we will get,
* 1. Ddr frequency scaling fail, we still get the old rate.
* 2. Ddr frequency scaling sucessful, we get the rate we set.
*/
dmcfreq->rate = clk_get_rate(dmcfreq->dmc_clk);
/* If get the incorrect rate, set voltage to old value. */
if (dmcfreq->rate != target_rate) {
dev_err(dev, "Got wrong frequency, Request %lu, Current %lu\n",
target_rate, dmcfreq->rate);
regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
dmcfreq->volt);
goto out;
} else if (old_clk_rate > target_rate)
err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
target_volt);
if (err)
dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
dmcfreq->rate = target_rate;
dmcfreq->volt = target_volt;
out:
rockchip_pmu_unblock();
out_unlock:
mutex_unlock(&dmcfreq->lock);
return err;
}
static int rk3399_dmcfreq_get_dev_status(struct device *dev,
struct devfreq_dev_status *stat)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
struct devfreq_event_data edata;
int ret = 0;
ret = devfreq_event_get_event(dmcfreq->edev, &edata);
if (ret < 0)
return ret;
stat->current_frequency = dmcfreq->rate;
stat->busy_time = edata.load_count;
stat->total_time = edata.total_count;
return ret;
}
static int rk3399_dmcfreq_get_cur_freq(struct device *dev, unsigned long *freq)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
*freq = dmcfreq->rate;
return 0;
}
static __maybe_unused int rk3399_dmcfreq_suspend(struct device *dev)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
int ret = 0;
ret = devfreq_event_disable_edev(dmcfreq->edev);
if (ret < 0) {
dev_err(dev, "failed to disable the devfreq-event devices\n");
return ret;
}
ret = devfreq_suspend_device(dmcfreq->devfreq);
if (ret < 0) {
dev_err(dev, "failed to suspend the devfreq devices\n");
return ret;
}
return 0;
}
static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(dev);
int ret = 0;
ret = devfreq_event_enable_edev(dmcfreq->edev);
if (ret < 0) {
dev_err(dev, "failed to enable the devfreq-event devices\n");
return ret;
}
ret = devfreq_resume_device(dmcfreq->devfreq);
if (ret < 0) {
dev_err(dev, "failed to resume the devfreq devices\n");
return ret;
}
return ret;
}
static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend,
rk3399_dmcfreq_resume);
static int rk3399_dmcfreq_of_props(struct rk3399_dmcfreq *data,
struct device_node *np)
{
int ret = 0;
/*
* These are all optional, and serve as minimum bounds. Give them large
* (i.e., never "disabled") values if the DT doesn't specify one.
*/
data->pd_idle_dis_freq =
data->sr_idle_dis_freq =
data->sr_mc_gate_idle_dis_freq =
data->srpd_lite_idle_dis_freq =
data->standby_idle_dis_freq = UINT_MAX;
ret |= of_property_read_u32(np, "rockchip,pd-idle-ns",
&data->pd_idle_ns);
ret |= of_property_read_u32(np, "rockchip,sr-idle-ns",
&data->sr_idle_ns);
ret |= of_property_read_u32(np, "rockchip,sr-mc-gate-idle-ns",
&data->sr_mc_gate_idle_ns);
ret |= of_property_read_u32(np, "rockchip,srpd-lite-idle-ns",
&data->srpd_lite_idle_ns);
ret |= of_property_read_u32(np, "rockchip,standby-idle-ns",
&data->standby_idle_ns);
ret |= of_property_read_u32(np, "rockchip,ddr3_odt_dis_freq",
&data->ddr3_odt_dis_freq);
ret |= of_property_read_u32(np, "rockchip,lpddr3_odt_dis_freq",
&data->lpddr3_odt_dis_freq);
ret |= of_property_read_u32(np, "rockchip,lpddr4_odt_dis_freq",
&data->lpddr4_odt_dis_freq);
ret |= of_property_read_u32(np, "rockchip,pd-idle-dis-freq-hz",
&data->pd_idle_dis_freq);
ret |= of_property_read_u32(np, "rockchip,sr-idle-dis-freq-hz",
&data->sr_idle_dis_freq);
ret |= of_property_read_u32(np, "rockchip,sr-mc-gate-idle-dis-freq-hz",
&data->sr_mc_gate_idle_dis_freq);
ret |= of_property_read_u32(np, "rockchip,srpd-lite-idle-dis-freq-hz",
&data->srpd_lite_idle_dis_freq);
ret |= of_property_read_u32(np, "rockchip,standby-idle-dis-freq-hz",
&data->standby_idle_dis_freq);
return ret;
}
static int rk3399_dmcfreq_probe(struct platform_device *pdev)
{
struct arm_smccc_res res;
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node, *node;
struct rk3399_dmcfreq *data;
int ret;
struct dev_pm_opp *opp;
u32 ddr_type;
u32 val;
data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
if (!data)
return -ENOMEM;
mutex_init(&data->lock);
data->vdd_center = devm_regulator_get(dev, "center");
if (IS_ERR(data->vdd_center))
return dev_err_probe(dev, PTR_ERR(data->vdd_center),
"Cannot get the regulator \"center\"\n");
data->dmc_clk = devm_clk_get(dev, "dmc_clk");
if (IS_ERR(data->dmc_clk))
return dev_err_probe(dev, PTR_ERR(data->dmc_clk),
"Cannot get the clk dmc_clk\n");
data->edev = devfreq_event_get_edev_by_phandle(dev, "devfreq-events", 0);
if (IS_ERR(data->edev))
return -EPROBE_DEFER;
ret = devfreq_event_enable_edev(data->edev);
if (ret < 0) {
dev_err(dev, "failed to enable devfreq-event devices\n");
return ret;
}
rk3399_dmcfreq_of_props(data, np);
node = of_parse_phandle(np, "rockchip,pmu", 0);
if (!node)
goto no_pmu;
data->regmap_pmu = syscon_node_to_regmap(node);
of_node_put(node);
if (IS_ERR(data->regmap_pmu)) {
ret = PTR_ERR(data->regmap_pmu);
goto err_edev;
}
regmap_read(data->regmap_pmu, RK3399_PMUGRF_OS_REG2, &val);
ddr_type = FIELD_GET(RK3399_PMUGRF_OS_REG2_DDRTYPE, val);
switch (ddr_type) {
case ROCKCHIP_DDRTYPE_DDR3:
data->odt_dis_freq = data->ddr3_odt_dis_freq;
break;
case ROCKCHIP_DDRTYPE_LPDDR3:
data->odt_dis_freq = data->lpddr3_odt_dis_freq;
break;
case ROCKCHIP_DDRTYPE_LPDDR4:
data->odt_dis_freq = data->lpddr4_odt_dis_freq;
break;
default:
ret = -EINVAL;
goto err_edev;
}
no_pmu:
arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
ROCKCHIP_SIP_CONFIG_DRAM_INIT,
0, 0, 0, 0, &res);
/*
* We add a devfreq driver to our parent since it has a device tree node
* with operating points.
*/
if (devm_pm_opp_of_add_table(dev)) {
dev_err(dev, "Invalid operating-points in device tree.\n");
ret = -EINVAL;
goto err_edev;
}
data->ondemand_data.upthreshold = 25;
data->ondemand_data.downdifferential = 15;
data->rate = clk_get_rate(data->dmc_clk);
opp = devfreq_recommended_opp(dev, &data->rate, 0);
if (IS_ERR(opp)) {
ret = PTR_ERR(opp);
goto err_edev;
}
data->rate = dev_pm_opp_get_freq(opp);
data->volt = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);
data->profile = (struct devfreq_dev_profile) {
.polling_ms = 200,
.target = rk3399_dmcfreq_target,
.get_dev_status = rk3399_dmcfreq_get_dev_status,
.get_cur_freq = rk3399_dmcfreq_get_cur_freq,
.initial_freq = data->rate,
};
data->devfreq = devm_devfreq_add_device(dev,
&data->profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
&data->ondemand_data);
if (IS_ERR(data->devfreq)) {
ret = PTR_ERR(data->devfreq);
goto err_edev;
}
devm_devfreq_register_opp_notifier(dev, data->devfreq);
data->dev = dev;
platform_set_drvdata(pdev, data);
return 0;
err_edev:
devfreq_event_disable_edev(data->edev);
return ret;
}
static void rk3399_dmcfreq_remove(struct platform_device *pdev)
{
struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev);
devfreq_event_disable_edev(dmcfreq->edev);
}
static const struct of_device_id rk3399dmc_devfreq_of_match[] = {
{ .compatible = "rockchip,rk3399-dmc" },
{ },
};
MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match);
static struct platform_driver rk3399_dmcfreq_driver = {
.probe = rk3399_dmcfreq_probe,
.remove_new = rk3399_dmcfreq_remove,
.driver = {
.name = "rk3399-dmc-freq",
.pm = &rk3399_dmcfreq_pm,
.of_match_table = rk3399dmc_devfreq_of_match,
},
};
module_platform_driver(rk3399_dmcfreq_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Lin Huang <hl@rock-chips.com>");
MODULE_DESCRIPTION("RK3399 dmcfreq driver with devfreq framework");
Reference in New Issue View Git Blame Copy Permalink