linux/arch/loongarch/kernel/head.S
Youling Tang 3f89765d62 LoongArch: kdump: Add single kernel image implementation
This feature depends on the kernel being relocatable.

Enable using single kernel image for kdump, and then no longer need to
build two kernels (production kernel and capture kernel share a single
kernel image).

Also enable CONFIG_CRASH_DUMP in loongson3_defconfig.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-02-25 22:12:17 +08:00

145 lines
3.2 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#include <linux/init.h>
#include <linux/threads.h>
#include <asm/addrspace.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/bug.h>
#include <asm/regdef.h>
#include <asm/loongarch.h>
#include <asm/stackframe.h>
#ifdef CONFIG_EFI_STUB
#include "efi-header.S"
__HEAD
_head:
.word MZ_MAGIC /* "MZ", MS-DOS header */
.org 0x8
.dword kernel_entry /* Kernel entry point */
.dword _end - _text /* Kernel image effective size */
.quad PHYS_LINK_KADDR /* Kernel image load offset from start of RAM */
.org 0x38 /* 0x20 ~ 0x37 reserved */
.long LINUX_PE_MAGIC
.long pe_header - _head /* Offset to the PE header */
pe_header:
__EFI_PE_HEADER
SYM_DATA(kernel_asize, .long _end - _text);
SYM_DATA(kernel_fsize, .long _edata - _text);
SYM_DATA(kernel_offset, .long kernel_offset - _text);
#endif
__REF
.align 12
SYM_CODE_START(kernel_entry) # kernel entry point
/* Config direct window and set PG */
li.d t0, CSR_DMW0_INIT # UC, PLV0, 0x8000 xxxx xxxx xxxx
csrwr t0, LOONGARCH_CSR_DMWIN0
li.d t0, CSR_DMW1_INIT # CA, PLV0, 0x9000 xxxx xxxx xxxx
csrwr t0, LOONGARCH_CSR_DMWIN1
JUMP_VIRT_ADDR t0, t1
/* Enable PG */
li.w t0, 0xb0 # PLV=0, IE=0, PG=1
csrwr t0, LOONGARCH_CSR_CRMD
li.w t0, 0x04 # PLV=0, PIE=1, PWE=0
csrwr t0, LOONGARCH_CSR_PRMD
li.w t0, 0x00 # FPE=0, SXE=0, ASXE=0, BTE=0
csrwr t0, LOONGARCH_CSR_EUEN
la.pcrel t0, __bss_start # clear .bss
st.d zero, t0, 0
la.pcrel t1, __bss_stop - LONGSIZE
1:
addi.d t0, t0, LONGSIZE
st.d zero, t0, 0
bne t0, t1, 1b
la.pcrel t0, fw_arg0
st.d a0, t0, 0 # firmware arguments
la.pcrel t0, fw_arg1
st.d a1, t0, 0
la.pcrel t0, fw_arg2
st.d a2, t0, 0
/* KSave3 used for percpu base, initialized as 0 */
csrwr zero, PERCPU_BASE_KS
/* GPR21 used for percpu base (runtime), initialized as 0 */
move u0, zero
la.pcrel tp, init_thread_union
/* Set the SP after an empty pt_regs. */
PTR_LI sp, (_THREAD_SIZE - PT_SIZE)
PTR_ADD sp, sp, tp
set_saved_sp sp, t0, t1
#ifdef CONFIG_RELOCATABLE
bl relocate_kernel
#ifdef CONFIG_RANDOMIZE_BASE
/* Repoint the sp into the new kernel */
PTR_LI sp, (_THREAD_SIZE - PT_SIZE)
PTR_ADD sp, sp, tp
set_saved_sp sp, t0, t1
#endif
/* relocate_kernel() returns the new kernel entry point */
jr a0
ASM_BUG()
#endif
bl start_kernel
ASM_BUG()
SYM_CODE_END(kernel_entry)
#ifdef CONFIG_SMP
/*
* SMP slave cpus entry point. Board specific code for bootstrap calls this
* function after setting up the stack and tp registers.
*/
SYM_CODE_START(smpboot_entry)
li.d t0, CSR_DMW0_INIT # UC, PLV0
csrwr t0, LOONGARCH_CSR_DMWIN0
li.d t0, CSR_DMW1_INIT # CA, PLV0
csrwr t0, LOONGARCH_CSR_DMWIN1
JUMP_VIRT_ADDR t0, t1
/* Enable PG */
li.w t0, 0xb0 # PLV=0, IE=0, PG=1
csrwr t0, LOONGARCH_CSR_CRMD
li.w t0, 0x04 # PLV=0, PIE=1, PWE=0
csrwr t0, LOONGARCH_CSR_PRMD
li.w t0, 0x00 # FPE=0, SXE=0, ASXE=0, BTE=0
csrwr t0, LOONGARCH_CSR_EUEN
la.pcrel t0, cpuboot_data
ld.d sp, t0, CPU_BOOT_STACK
ld.d tp, t0, CPU_BOOT_TINFO
bl start_secondary
ASM_BUG()
SYM_CODE_END(smpboot_entry)
#endif /* CONFIG_SMP */
SYM_ENTRY(kernel_entry_end, SYM_L_GLOBAL, SYM_A_NONE)