mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 10:31:54 +00:00
dcc8722a64
By moving the two JP12 jumpers 90 degrees, and switching the setting of SW2.8, the sbc8548 can be configured to boot off the alternate 64MB SODIMM, which when populated with u-boot can be a handy recovery option, in case the u-boot in the 8MB soldered on flash gets corrupted. Here we add an alternate dts file to match that configuration. To better highlight the differences, the output from the u-boot "fli" command is shown for the normal configuration and then the alternate configuration. Normal: ----------------------- Bank # 1: CFI conformant flash (8 x 8) Size: 8 MB in 64 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 2 ms, buffer size: 32 bytes Sector Start Addresses: FF800000 E FF820000 E FF840000 E FF860000 E FF880000 E [...] FFEE0000 E FFF00000 E FFF20000 E FFF40000 E FFF60000 E FFF80000 FFFA0000 RO FFFC0000 RO FFFE0000 RO Bank # 2: CFI conformant flash (32 x 8) Size: 64 MB in 128 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 2 ms, buffer size: 32 bytes Sector Start Addresses: EC000000 E EC080000 E EC100000 E EC180000 E EC200000 E [...] EFC00000 E EFC80000 E EFD00000 E EFD80000 E EFE00000 E EFE80000 E EFF00000 EFF80000 ----------------------- Alternate: ----------------------- Bank # 1: CFI conformant flash (32 x 8) Size: 64 MB in 128 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 2 ms, buffer size: 32 bytes Sector Start Addresses: FC000000 E FC080000 E FC100000 E FC180000 E FC200000 E [...] FFC00000 E FFC80000 E FFD00000 E FFD80000 E FFE00000 E FFE80000 E FFF00000 RO FFF80000 RO Bank # 2: CFI conformant flash (8 x 8) Size: 8 MB in 64 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17 Erase timeout: 4096 ms, write timeout: 1 ms Buffer write timeout: 2 ms, buffer size: 32 bytes Sector Start Addresses: EF800000 E EF820000 E EF840000 E EF860000 E EF880000 E [...] EFEE0000 E EFF00000 E EFF20000 E EFF40000 E EFF60000 E EFF80000 E EFFA0000 EFFC0000 EFFE0000 ----------------------- Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
116 lines
2.5 KiB
Plaintext
116 lines
2.5 KiB
Plaintext
/*
|
|
* SBC8548 Device Tree Source
|
|
*
|
|
* Configured for booting off the alternate (64MB SODIMM) flash.
|
|
* Requires switching JP12 jumpers and changing SW2.8 setting.
|
|
*
|
|
* Copyright 2013 Wind River Systems Inc.
|
|
*
|
|
* Paul Gortmaker (see MAINTAINERS for contact information)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
/include/ "sbc8548-pre.dtsi"
|
|
|
|
/{
|
|
localbus@e0000000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
reg = <0xe0000000 0x5000>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/
|
|
0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
|
|
0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
|
|
0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
|
|
0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/
|
|
|
|
flash@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0 0x0 0x04000000>;
|
|
compatible = "intel,JS28F128", "cfi-flash";
|
|
bank-width = <4>;
|
|
device-width = <1>;
|
|
partition@0x0 {
|
|
label = "space";
|
|
/* FC000000 -> FFEFFFFF */
|
|
reg = <0x00000000 0x03f00000>;
|
|
};
|
|
partition@0x03f00000 {
|
|
label = "bootloader";
|
|
/* FFF00000 -> FFFFFFFF */
|
|
reg = <0x03f00000 0x00100000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
|
|
epld@5,0 {
|
|
compatible = "wrs,epld-localbus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
reg = <0x5 0x0 0x00b10000>;
|
|
ranges = <
|
|
0x0 0x0 0x5 0x000000 0x1fff /* LED */
|
|
0x1 0x0 0x5 0x100000 0x1fff /* Switches */
|
|
0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
|
|
0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
|
|
>;
|
|
|
|
led@0,0 {
|
|
compatible = "led";
|
|
reg = <0x0 0x0 0x1fff>;
|
|
};
|
|
|
|
switches@1,0 {
|
|
compatible = "switches";
|
|
reg = <0x1 0x0 0x1fff>;
|
|
};
|
|
|
|
hw-rev@3,0 {
|
|
compatible = "hw-rev";
|
|
reg = <0x3 0x0 0x1fff>;
|
|
};
|
|
|
|
eeprom@b,0 {
|
|
compatible = "eeprom";
|
|
reg = <0xb 0 0x1fff>;
|
|
};
|
|
|
|
};
|
|
|
|
alt-flash@6,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "intel,JS28F640", "cfi-flash";
|
|
reg = <0x6 0x0 0x800000>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
partition@0x0 {
|
|
label = "space";
|
|
/* EF800000 -> EFF9FFFF */
|
|
reg = <0x00000000 0x007a0000>;
|
|
};
|
|
partition@0x7a0000 {
|
|
label = "bootloader";
|
|
/* EFFA0000 -> EFFFFFFF */
|
|
reg = <0x007a0000 0x00060000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
|
|
};
|
|
};
|
|
|
|
/include/ "sbc8548-post.dtsi"
|