Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-27 14:41:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
fe557319aa
linux/arch/arm/mach-pxa/colibri-pxa320.c
Linus Walleij fdabc466f3 usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors 
Instead of using the legacy GPIO API and keeping track on
polarity inversion semantics in the driver, switch to use
GPIO descriptors for this driver and change all consumers
in the process.

This makes it possible to retire platform data completely:
the only remaining platform data member was "wakeup" which
was intended to make the vbus interrupt wakeup capable,
but was not set by any users and thus remained unused. VBUS
was not waking any devices up. Leave a comment about it so
later developers using the platform can consider setting it
to always enabled so plugging in USB wakes up the platform.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200123155013.93249-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23 19:20:57 +01:00

265 lines
6.3 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-pxa/colibri-pxa320.c
*
* Support for Toradex PXA320/310 based Colibri module
*
* Daniel Mack <daniel@caiaq.de>
* Matthias Meier <matthias.j.meier@gmx.net>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include "pxa320.h"
#include "colibri.h"
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include "pxa27x-udc.h"
#include "udc.h"
#include "generic.h"
#include "devices.h"
#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
/* MMC */
GPIO22_MMC1_CLK,
GPIO23_MMC1_CMD,
GPIO18_MMC1_DAT0,
GPIO19_MMC1_DAT1,
GPIO20_MMC1_DAT2,
GPIO21_MMC1_DAT3,
GPIO28_GPIO, /* SD detect */
/* UART 1 configuration (may be set by bootloader) */
GPIO99_UART1_CTS,
GPIO104_UART1_RTS,
GPIO97_UART1_RXD,
GPIO98_UART1_TXD,
GPIO101_UART1_DTR,
GPIO103_UART1_DSR,
GPIO100_UART1_DCD,
GPIO102_UART1_RI,
/* UART 2 configuration */
GPIO109_UART2_CTS,
GPIO112_UART2_RTS,
GPIO110_UART2_RXD,
GPIO111_UART2_TXD,
/* UART 3 configuration */
GPIO30_UART3_RXD,
GPIO31_UART3_TXD,
/* UHC */
GPIO2_2_USBH_PEN,
GPIO3_2_USBH_PWR,
/* I2C */
GPIO32_I2C_SCL,
GPIO33_I2C_SDA,
/* PCMCIA */
MFP_CFG(GPIO59, AF7), /* PRST ; AF7 to tristate */
MFP_CFG(GPIO61, AF7), /* PCE1 ; AF7 to tristate */
MFP_CFG(GPIO60, AF7), /* PCE2 ; AF7 to tristate */
MFP_CFG(GPIO62, AF7), /* PCD ; AF7 to tristate */
MFP_CFG(GPIO56, AF7), /* PSKTSEL ; AF7 to tristate */
GPIO27_GPIO, /* RDnWR ; input/tristate */
GPIO50_GPIO, /* PREG ; input/tristate */
GPIO2_RDY,
GPIO5_NPIOR,
GPIO6_NPIOW,
GPIO7_NPIOS16,
GPIO8_NPWAIT,
GPIO29_GPIO, /* PRDY (READY GPIO) */
GPIO57_GPIO, /* PPEN (POWER GPIO) */
GPIO81_GPIO, /* PCD (DETECT GPIO) */
GPIO77_GPIO, /* PRST (RESET GPIO) */
GPIO53_GPIO, /* PBVD1 */
GPIO79_GPIO, /* PBVD2 */
GPIO54_GPIO, /* POE */
};
#else
static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
#endif
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
.flags = 0, /* defined later */
.wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
[0] = {
.start = PXA3xx_CS2_PHYS,
.end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
static struct platform_device asix_device = {
.name = "ax88796",
.id = 0,
.num_resources = ARRAY_SIZE(colibri_asix_resource),
.resource = colibri_asix_resource,
.dev = {
.platform_data = &colibri_asix_platdata
}
};
static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
GPIO3_nCS2, /* AX88796 chip select */
GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
};
static void __init colibri_pxa320_init_eth(void)
{
colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
platform_device_register(&asix_device);
}
#else
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
.dev_id = "gpio-vbus",
.table = {
GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
"vbus", GPIO_ACTIVE_HIGH),
{ },
},
};
static struct platform_device colibri_pxa320_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
};
static void colibri_pxa320_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
UP2OCR = UP2OCR_HXOE;
}
static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
.udc_command = colibri_pxa320_udc_command,
.gpio_pullup = -1,
};
static void __init colibri_pxa320_init_udc(void)
{
pxa_set_udc_info(&colibri_pxa320_udc_info);
gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
platform_device_register(&colibri_pxa320_gpio_vbus);
}
#else
static inline void colibri_pxa320_init_udc(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
GPIO6_2_LCD_LDD_0,
GPIO7_2_LCD_LDD_1,
GPIO8_2_LCD_LDD_2,
GPIO9_2_LCD_LDD_3,
GPIO10_2_LCD_LDD_4,
GPIO11_2_LCD_LDD_5,
GPIO12_2_LCD_LDD_6,
GPIO13_2_LCD_LDD_7,
GPIO63_LCD_LDD_8,
GPIO64_LCD_LDD_9,
GPIO65_LCD_LDD_10,
GPIO66_LCD_LDD_11,
GPIO67_LCD_LDD_12,
GPIO68_LCD_LDD_13,
GPIO69_LCD_LDD_14,
GPIO70_LCD_LDD_15,
GPIO71_LCD_LDD_16,
GPIO72_LCD_LDD_17,
GPIO73_LCD_CS_N,
GPIO74_LCD_VSYNC,
GPIO14_2_LCD_FCLK,
GPIO15_2_LCD_LCLK,
GPIO16_2_LCD_PCLK,
GPIO17_2_LCD_BIAS,
};
static void __init colibri_pxa320_init_lcd(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
}
#else
static inline void colibri_pxa320_init_lcd(void) {}
#endif
#if defined(CONFIG_SND_AC97_CODEC) || \
defined(CONFIG_SND_AC97_CODEC_MODULE)
static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
GPIO34_AC97_SYSCLK,
GPIO35_AC97_SDATA_IN_0,
GPIO37_AC97_SDATA_OUT,
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET
};
static inline void __init colibri_pxa320_init_ac97(void)
{
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
pxa_set_ac97_info(NULL);
}
#else
static inline void colibri_pxa320_init_ac97(void) {}
#endif
void __init colibri_pxa320_init(void)
{
colibri_pxa320_init_eth();
colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
colibri_pxa320_init_udc();
/* Evalboard init */
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
colibri_evalboard_init();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.atag_offset = 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink