mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
a4972b1b9a
Remove the function i5100_recmema_dm_buf_id() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Link: http://lkml.kernel.org/r/1420999030-21770-1-git-send-email-rickard_strandqvist@spectrumdigital.se Signed-off-by: Borislav Petkov <bp@suse.de>
1246 lines
30 KiB
C
1246 lines
30 KiB
C
/*
|
|
* Intel 5100 Memory Controllers kernel module
|
|
*
|
|
* This file may be distributed under the terms of the
|
|
* GNU General Public License.
|
|
*
|
|
* This module is based on the following document:
|
|
*
|
|
* Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
|
|
* http://download.intel.com/design/chipsets/datashts/318378.pdf
|
|
*
|
|
* The intel 5100 has two independent channels. EDAC core currently
|
|
* can not reflect this configuration so instead the chip-select
|
|
* rows for each respective channel are laid out one after another,
|
|
* the first half belonging to channel 0, the second half belonging
|
|
* to channel 1.
|
|
*
|
|
* This driver is for DDR2 DIMMs, and it uses chip select to select among the
|
|
* several ranks. However, instead of showing memories as ranks, it outputs
|
|
* them as DIMM's. An internal table creates the association between ranks
|
|
* and DIMM's.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/edac.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mmzone.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
#include "edac_core.h"
|
|
|
|
/* register addresses */
|
|
|
|
/* device 16, func 1 */
|
|
#define I5100_MC 0x40 /* Memory Control Register */
|
|
#define I5100_MC_SCRBEN_MASK (1 << 7)
|
|
#define I5100_MC_SCRBDONE_MASK (1 << 4)
|
|
#define I5100_MS 0x44 /* Memory Status Register */
|
|
#define I5100_SPDDATA 0x48 /* Serial Presence Detect Status Reg */
|
|
#define I5100_SPDCMD 0x4c /* Serial Presence Detect Command Reg */
|
|
#define I5100_TOLM 0x6c /* Top of Low Memory */
|
|
#define I5100_MIR0 0x80 /* Memory Interleave Range 0 */
|
|
#define I5100_MIR1 0x84 /* Memory Interleave Range 1 */
|
|
#define I5100_AMIR_0 0x8c /* Adjusted Memory Interleave Range 0 */
|
|
#define I5100_AMIR_1 0x90 /* Adjusted Memory Interleave Range 1 */
|
|
#define I5100_FERR_NF_MEM 0xa0 /* MC First Non Fatal Errors */
|
|
#define I5100_FERR_NF_MEM_M16ERR_MASK (1 << 16)
|
|
#define I5100_FERR_NF_MEM_M15ERR_MASK (1 << 15)
|
|
#define I5100_FERR_NF_MEM_M14ERR_MASK (1 << 14)
|
|
#define I5100_FERR_NF_MEM_M12ERR_MASK (1 << 12)
|
|
#define I5100_FERR_NF_MEM_M11ERR_MASK (1 << 11)
|
|
#define I5100_FERR_NF_MEM_M10ERR_MASK (1 << 10)
|
|
#define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6)
|
|
#define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5)
|
|
#define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4)
|
|
#define I5100_FERR_NF_MEM_M1ERR_MASK (1 << 1)
|
|
#define I5100_FERR_NF_MEM_ANY_MASK \
|
|
(I5100_FERR_NF_MEM_M16ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M15ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M14ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M12ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M11ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M10ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M6ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M5ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M4ERR_MASK | \
|
|
I5100_FERR_NF_MEM_M1ERR_MASK)
|
|
#define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */
|
|
#define I5100_EMASK_MEM 0xa8 /* MC Error Mask Register */
|
|
#define I5100_MEM0EINJMSK0 0x200 /* Injection Mask0 Register Channel 0 */
|
|
#define I5100_MEM1EINJMSK0 0x208 /* Injection Mask0 Register Channel 1 */
|
|
#define I5100_MEMXEINJMSK0_EINJEN (1 << 27)
|
|
#define I5100_MEM0EINJMSK1 0x204 /* Injection Mask1 Register Channel 0 */
|
|
#define I5100_MEM1EINJMSK1 0x206 /* Injection Mask1 Register Channel 1 */
|
|
|
|
/* Device 19, Function 0 */
|
|
#define I5100_DINJ0 0x9a
|
|
|
|
/* device 21 and 22, func 0 */
|
|
#define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */
|
|
#define I5100_DMIR 0x15c /* DIMM Interleave Range */
|
|
#define I5100_VALIDLOG 0x18c /* Valid Log Markers */
|
|
#define I5100_NRECMEMA 0x190 /* Non-Recoverable Memory Error Log Reg A */
|
|
#define I5100_NRECMEMB 0x194 /* Non-Recoverable Memory Error Log Reg B */
|
|
#define I5100_REDMEMA 0x198 /* Recoverable Memory Data Error Log Reg A */
|
|
#define I5100_REDMEMB 0x19c /* Recoverable Memory Data Error Log Reg B */
|
|
#define I5100_RECMEMA 0x1a0 /* Recoverable Memory Error Log Reg A */
|
|
#define I5100_RECMEMB 0x1a4 /* Recoverable Memory Error Log Reg B */
|
|
#define I5100_MTR_4 0x1b0 /* Memory Technology Registers 4,5 */
|
|
|
|
/* bit field accessors */
|
|
|
|
static inline u32 i5100_mc_scrben(u32 mc)
|
|
{
|
|
return mc >> 7 & 1;
|
|
}
|
|
|
|
static inline u32 i5100_mc_errdeten(u32 mc)
|
|
{
|
|
return mc >> 5 & 1;
|
|
}
|
|
|
|
static inline u32 i5100_mc_scrbdone(u32 mc)
|
|
{
|
|
return mc >> 4 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_spddata_rdo(u16 a)
|
|
{
|
|
return a >> 15 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_spddata_sbe(u16 a)
|
|
{
|
|
return a >> 13 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_spddata_busy(u16 a)
|
|
{
|
|
return a >> 12 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_spddata_data(u16 a)
|
|
{
|
|
return a & ((1 << 8) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba,
|
|
u32 data, u32 cmd)
|
|
{
|
|
return ((dti & ((1 << 4) - 1)) << 28) |
|
|
((ckovrd & 1) << 27) |
|
|
((sa & ((1 << 3) - 1)) << 24) |
|
|
((ba & ((1 << 8) - 1)) << 16) |
|
|
((data & ((1 << 8) - 1)) << 8) |
|
|
(cmd & 1);
|
|
}
|
|
|
|
static inline u16 i5100_tolm_tolm(u16 a)
|
|
{
|
|
return a >> 12 & ((1 << 4) - 1);
|
|
}
|
|
|
|
static inline u16 i5100_mir_limit(u16 a)
|
|
{
|
|
return a >> 4 & ((1 << 12) - 1);
|
|
}
|
|
|
|
static inline u16 i5100_mir_way1(u16 a)
|
|
{
|
|
return a >> 1 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_mir_way0(u16 a)
|
|
{
|
|
return a & 1;
|
|
}
|
|
|
|
static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a)
|
|
{
|
|
return a >> 28 & 1;
|
|
}
|
|
|
|
static inline u32 i5100_ferr_nf_mem_any(u32 a)
|
|
{
|
|
return a & I5100_FERR_NF_MEM_ANY_MASK;
|
|
}
|
|
|
|
static inline u32 i5100_nerr_nf_mem_any(u32 a)
|
|
{
|
|
return i5100_ferr_nf_mem_any(a);
|
|
}
|
|
|
|
static inline u32 i5100_dmir_limit(u32 a)
|
|
{
|
|
return a >> 16 & ((1 << 11) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_dmir_rank(u32 a, u32 i)
|
|
{
|
|
return a >> (4 * i) & ((1 << 2) - 1);
|
|
}
|
|
|
|
static inline u16 i5100_mtr_present(u16 a)
|
|
{
|
|
return a >> 10 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_mtr_ethrottle(u16 a)
|
|
{
|
|
return a >> 9 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_mtr_width(u16 a)
|
|
{
|
|
return a >> 8 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_mtr_numbank(u16 a)
|
|
{
|
|
return a >> 6 & 1;
|
|
}
|
|
|
|
static inline u16 i5100_mtr_numrow(u16 a)
|
|
{
|
|
return a >> 2 & ((1 << 2) - 1);
|
|
}
|
|
|
|
static inline u16 i5100_mtr_numcol(u16 a)
|
|
{
|
|
return a & ((1 << 2) - 1);
|
|
}
|
|
|
|
|
|
static inline u32 i5100_validlog_redmemvalid(u32 a)
|
|
{
|
|
return a >> 2 & 1;
|
|
}
|
|
|
|
static inline u32 i5100_validlog_recmemvalid(u32 a)
|
|
{
|
|
return a >> 1 & 1;
|
|
}
|
|
|
|
static inline u32 i5100_validlog_nrecmemvalid(u32 a)
|
|
{
|
|
return a & 1;
|
|
}
|
|
|
|
static inline u32 i5100_nrecmema_merr(u32 a)
|
|
{
|
|
return a >> 15 & ((1 << 5) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_nrecmema_bank(u32 a)
|
|
{
|
|
return a >> 12 & ((1 << 3) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_nrecmema_rank(u32 a)
|
|
{
|
|
return a >> 8 & ((1 << 3) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_nrecmema_dm_buf_id(u32 a)
|
|
{
|
|
return a & ((1 << 8) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_nrecmemb_cas(u32 a)
|
|
{
|
|
return a >> 16 & ((1 << 13) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_nrecmemb_ras(u32 a)
|
|
{
|
|
return a & ((1 << 16) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_redmemb_ecc_locator(u32 a)
|
|
{
|
|
return a & ((1 << 18) - 1);
|
|
}
|
|
|
|
static inline u32 i5100_recmema_merr(u32 a)
|
|
{
|
|
return i5100_nrecmema_merr(a);
|
|
}
|
|
|
|
static inline u32 i5100_recmema_bank(u32 a)
|
|
{
|
|
return i5100_nrecmema_bank(a);
|
|
}
|
|
|
|
static inline u32 i5100_recmema_rank(u32 a)
|
|
{
|
|
return i5100_nrecmema_rank(a);
|
|
}
|
|
|
|
static inline u32 i5100_recmemb_cas(u32 a)
|
|
{
|
|
return i5100_nrecmemb_cas(a);
|
|
}
|
|
|
|
static inline u32 i5100_recmemb_ras(u32 a)
|
|
{
|
|
return i5100_nrecmemb_ras(a);
|
|
}
|
|
|
|
/* some generic limits */
|
|
#define I5100_MAX_RANKS_PER_CHAN 6
|
|
#define I5100_CHANNELS 2
|
|
#define I5100_MAX_RANKS_PER_DIMM 4
|
|
#define I5100_DIMM_ADDR_LINES (6 - 3) /* 64 bits / 8 bits per byte */
|
|
#define I5100_MAX_DIMM_SLOTS_PER_CHAN 4
|
|
#define I5100_MAX_RANK_INTERLEAVE 4
|
|
#define I5100_MAX_DMIRS 5
|
|
#define I5100_SCRUB_REFRESH_RATE (5 * 60 * HZ)
|
|
|
|
struct i5100_priv {
|
|
/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
|
|
int dimm_numrank[I5100_CHANNELS][I5100_MAX_DIMM_SLOTS_PER_CHAN];
|
|
|
|
/*
|
|
* mainboard chip select map -- maps i5100 chip selects to
|
|
* DIMM slot chip selects. In the case of only 4 ranks per
|
|
* channel, the mapping is fairly obvious but not unique.
|
|
* we map -1 -> NC and assume both channels use the same
|
|
* map...
|
|
*
|
|
*/
|
|
int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CHAN][I5100_MAX_RANKS_PER_DIMM];
|
|
|
|
/* memory interleave range */
|
|
struct {
|
|
u64 limit;
|
|
unsigned way[2];
|
|
} mir[I5100_CHANNELS];
|
|
|
|
/* adjusted memory interleave range register */
|
|
unsigned amir[I5100_CHANNELS];
|
|
|
|
/* dimm interleave range */
|
|
struct {
|
|
unsigned rank[I5100_MAX_RANK_INTERLEAVE];
|
|
u64 limit;
|
|
} dmir[I5100_CHANNELS][I5100_MAX_DMIRS];
|
|
|
|
/* memory technology registers... */
|
|
struct {
|
|
unsigned present; /* 0 or 1 */
|
|
unsigned ethrottle; /* 0 or 1 */
|
|
unsigned width; /* 4 or 8 bits */
|
|
unsigned numbank; /* 2 or 3 lines */
|
|
unsigned numrow; /* 13 .. 16 lines */
|
|
unsigned numcol; /* 11 .. 12 lines */
|
|
} mtr[I5100_CHANNELS][I5100_MAX_RANKS_PER_CHAN];
|
|
|
|
u64 tolm; /* top of low memory in bytes */
|
|
unsigned ranksperchan; /* number of ranks per channel */
|
|
|
|
struct pci_dev *mc; /* device 16 func 1 */
|
|
struct pci_dev *einj; /* device 19 func 0 */
|
|
struct pci_dev *ch0mm; /* device 21 func 0 */
|
|
struct pci_dev *ch1mm; /* device 22 func 0 */
|
|
|
|
struct delayed_work i5100_scrubbing;
|
|
int scrub_enable;
|
|
|
|
/* Error injection */
|
|
u8 inject_channel;
|
|
u8 inject_hlinesel;
|
|
u8 inject_deviceptr1;
|
|
u8 inject_deviceptr2;
|
|
u16 inject_eccmask1;
|
|
u16 inject_eccmask2;
|
|
|
|
struct dentry *debugfs;
|
|
};
|
|
|
|
static struct dentry *i5100_debugfs;
|
|
|
|
/* map a rank/chan to a slot number on the mainboard */
|
|
static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
|
|
int chan, int rank)
|
|
{
|
|
const struct i5100_priv *priv = mci->pvt_info;
|
|
int i;
|
|
|
|
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
|
|
int j;
|
|
const int numrank = priv->dimm_numrank[chan][i];
|
|
|
|
for (j = 0; j < numrank; j++)
|
|
if (priv->dimm_csmap[i][j] == rank)
|
|
return i * 2 + chan;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static const char *i5100_err_msg(unsigned err)
|
|
{
|
|
static const char *merrs[] = {
|
|
"unknown", /* 0 */
|
|
"uncorrectable data ECC on replay", /* 1 */
|
|
"unknown", /* 2 */
|
|
"unknown", /* 3 */
|
|
"aliased uncorrectable demand data ECC", /* 4 */
|
|
"aliased uncorrectable spare-copy data ECC", /* 5 */
|
|
"aliased uncorrectable patrol data ECC", /* 6 */
|
|
"unknown", /* 7 */
|
|
"unknown", /* 8 */
|
|
"unknown", /* 9 */
|
|
"non-aliased uncorrectable demand data ECC", /* 10 */
|
|
"non-aliased uncorrectable spare-copy data ECC", /* 11 */
|
|
"non-aliased uncorrectable patrol data ECC", /* 12 */
|
|
"unknown", /* 13 */
|
|
"correctable demand data ECC", /* 14 */
|
|
"correctable spare-copy data ECC", /* 15 */
|
|
"correctable patrol data ECC", /* 16 */
|
|
"unknown", /* 17 */
|
|
"SPD protocol error", /* 18 */
|
|
"unknown", /* 19 */
|
|
"spare copy initiated", /* 20 */
|
|
"spare copy completed", /* 21 */
|
|
};
|
|
unsigned i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(merrs); i++)
|
|
if (1 << i & err)
|
|
return merrs[i];
|
|
|
|
return "none";
|
|
}
|
|
|
|
/* convert csrow index into a rank (per channel -- 0..5) */
|
|
static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
|
|
{
|
|
const struct i5100_priv *priv = mci->pvt_info;
|
|
|
|
return csrow % priv->ranksperchan;
|
|
}
|
|
|
|
/* convert csrow index into a channel (0..1) */
|
|
static int i5100_csrow_to_chan(const struct mem_ctl_info *mci, int csrow)
|
|
{
|
|
const struct i5100_priv *priv = mci->pvt_info;
|
|
|
|
return csrow / priv->ranksperchan;
|
|
}
|
|
|
|
static void i5100_handle_ce(struct mem_ctl_info *mci,
|
|
int chan,
|
|
unsigned bank,
|
|
unsigned rank,
|
|
unsigned long syndrome,
|
|
unsigned cas,
|
|
unsigned ras,
|
|
const char *msg)
|
|
{
|
|
char detail[80];
|
|
|
|
/* Form out message */
|
|
snprintf(detail, sizeof(detail),
|
|
"bank %u, cas %u, ras %u\n",
|
|
bank, cas, ras);
|
|
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
|
|
0, 0, syndrome,
|
|
chan, rank, -1,
|
|
msg, detail);
|
|
}
|
|
|
|
static void i5100_handle_ue(struct mem_ctl_info *mci,
|
|
int chan,
|
|
unsigned bank,
|
|
unsigned rank,
|
|
unsigned long syndrome,
|
|
unsigned cas,
|
|
unsigned ras,
|
|
const char *msg)
|
|
{
|
|
char detail[80];
|
|
|
|
/* Form out message */
|
|
snprintf(detail, sizeof(detail),
|
|
"bank %u, cas %u, ras %u\n",
|
|
bank, cas, ras);
|
|
|
|
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
|
|
0, 0, syndrome,
|
|
chan, rank, -1,
|
|
msg, detail);
|
|
}
|
|
|
|
static void i5100_read_log(struct mem_ctl_info *mci, int chan,
|
|
u32 ferr, u32 nerr)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
struct pci_dev *pdev = (chan) ? priv->ch1mm : priv->ch0mm;
|
|
u32 dw;
|
|
u32 dw2;
|
|
unsigned syndrome = 0;
|
|
unsigned ecc_loc = 0;
|
|
unsigned merr;
|
|
unsigned bank;
|
|
unsigned rank;
|
|
unsigned cas;
|
|
unsigned ras;
|
|
|
|
pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
|
|
|
|
if (i5100_validlog_redmemvalid(dw)) {
|
|
pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
|
|
syndrome = dw2;
|
|
pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
|
|
ecc_loc = i5100_redmemb_ecc_locator(dw2);
|
|
}
|
|
|
|
if (i5100_validlog_recmemvalid(dw)) {
|
|
const char *msg;
|
|
|
|
pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
|
|
merr = i5100_recmema_merr(dw2);
|
|
bank = i5100_recmema_bank(dw2);
|
|
rank = i5100_recmema_rank(dw2);
|
|
|
|
pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
|
|
cas = i5100_recmemb_cas(dw2);
|
|
ras = i5100_recmemb_ras(dw2);
|
|
|
|
/* FIXME: not really sure if this is what merr is...
|
|
*/
|
|
if (!merr)
|
|
msg = i5100_err_msg(ferr);
|
|
else
|
|
msg = i5100_err_msg(nerr);
|
|
|
|
i5100_handle_ce(mci, chan, bank, rank, syndrome, cas, ras, msg);
|
|
}
|
|
|
|
if (i5100_validlog_nrecmemvalid(dw)) {
|
|
const char *msg;
|
|
|
|
pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
|
|
merr = i5100_nrecmema_merr(dw2);
|
|
bank = i5100_nrecmema_bank(dw2);
|
|
rank = i5100_nrecmema_rank(dw2);
|
|
|
|
pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
|
|
cas = i5100_nrecmemb_cas(dw2);
|
|
ras = i5100_nrecmemb_ras(dw2);
|
|
|
|
/* FIXME: not really sure if this is what merr is...
|
|
*/
|
|
if (!merr)
|
|
msg = i5100_err_msg(ferr);
|
|
else
|
|
msg = i5100_err_msg(nerr);
|
|
|
|
i5100_handle_ue(mci, chan, bank, rank, syndrome, cas, ras, msg);
|
|
}
|
|
|
|
pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
|
|
}
|
|
|
|
static void i5100_check_error(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
u32 dw, dw2;
|
|
|
|
pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
|
|
if (i5100_ferr_nf_mem_any(dw)) {
|
|
|
|
pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
|
|
|
|
i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
|
|
i5100_ferr_nf_mem_any(dw),
|
|
i5100_nerr_nf_mem_any(dw2));
|
|
|
|
pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, dw2);
|
|
}
|
|
pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
|
|
}
|
|
|
|
/* The i5100 chipset will scrub the entire memory once, then
|
|
* set a done bit. Continuous scrubbing is achieved by enqueing
|
|
* delayed work to a workqueue, checking every few minutes if
|
|
* the scrubbing has completed and if so reinitiating it.
|
|
*/
|
|
|
|
static void i5100_refresh_scrubbing(struct work_struct *work)
|
|
{
|
|
struct delayed_work *i5100_scrubbing = container_of(work,
|
|
struct delayed_work,
|
|
work);
|
|
struct i5100_priv *priv = container_of(i5100_scrubbing,
|
|
struct i5100_priv,
|
|
i5100_scrubbing);
|
|
u32 dw;
|
|
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
|
|
if (priv->scrub_enable) {
|
|
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
|
|
if (i5100_mc_scrbdone(dw)) {
|
|
dw |= I5100_MC_SCRBEN_MASK;
|
|
pci_write_config_dword(priv->mc, I5100_MC, dw);
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
}
|
|
|
|
schedule_delayed_work(&(priv->i5100_scrubbing),
|
|
I5100_SCRUB_REFRESH_RATE);
|
|
}
|
|
}
|
|
/*
|
|
* The bandwidth is based on experimentation, feel free to refine it.
|
|
*/
|
|
static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
u32 dw;
|
|
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
if (bandwidth) {
|
|
priv->scrub_enable = 1;
|
|
dw |= I5100_MC_SCRBEN_MASK;
|
|
schedule_delayed_work(&(priv->i5100_scrubbing),
|
|
I5100_SCRUB_REFRESH_RATE);
|
|
} else {
|
|
priv->scrub_enable = 0;
|
|
dw &= ~I5100_MC_SCRBEN_MASK;
|
|
cancel_delayed_work(&(priv->i5100_scrubbing));
|
|
}
|
|
pci_write_config_dword(priv->mc, I5100_MC, dw);
|
|
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
|
|
bandwidth = 5900000 * i5100_mc_scrben(dw);
|
|
|
|
return bandwidth;
|
|
}
|
|
|
|
static int i5100_get_scrub_rate(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
u32 dw;
|
|
|
|
pci_read_config_dword(priv->mc, I5100_MC, &dw);
|
|
|
|
return 5900000 * i5100_mc_scrben(dw);
|
|
}
|
|
|
|
static struct pci_dev *pci_get_device_func(unsigned vendor,
|
|
unsigned device,
|
|
unsigned func)
|
|
{
|
|
struct pci_dev *ret = NULL;
|
|
|
|
while (1) {
|
|
ret = pci_get_device(vendor, device, ret);
|
|
|
|
if (!ret)
|
|
break;
|
|
|
|
if (PCI_FUNC(ret->devfn) == func)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned long i5100_npages(struct mem_ctl_info *mci, int csrow)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
const unsigned chan_rank = i5100_csrow_to_rank(mci, csrow);
|
|
const unsigned chan = i5100_csrow_to_chan(mci, csrow);
|
|
unsigned addr_lines;
|
|
|
|
/* dimm present? */
|
|
if (!priv->mtr[chan][chan_rank].present)
|
|
return 0ULL;
|
|
|
|
addr_lines =
|
|
I5100_DIMM_ADDR_LINES +
|
|
priv->mtr[chan][chan_rank].numcol +
|
|
priv->mtr[chan][chan_rank].numrow +
|
|
priv->mtr[chan][chan_rank].numbank;
|
|
|
|
return (unsigned long)
|
|
((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
|
|
}
|
|
|
|
static void i5100_init_mtr(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
|
|
int i;
|
|
|
|
for (i = 0; i < I5100_CHANNELS; i++) {
|
|
int j;
|
|
struct pci_dev *pdev = mms[i];
|
|
|
|
for (j = 0; j < I5100_MAX_RANKS_PER_CHAN; j++) {
|
|
const unsigned addr =
|
|
(j < 4) ? I5100_MTR_0 + j * 2 :
|
|
I5100_MTR_4 + (j - 4) * 2;
|
|
u16 w;
|
|
|
|
pci_read_config_word(pdev, addr, &w);
|
|
|
|
priv->mtr[i][j].present = i5100_mtr_present(w);
|
|
priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w);
|
|
priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w);
|
|
priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w);
|
|
priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w);
|
|
priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* FIXME: make this into a real i2c adapter (so that dimm-decode
|
|
* will work)?
|
|
*/
|
|
static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
|
|
u8 ch, u8 slot, u8 addr, u8 *byte)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
u16 w;
|
|
unsigned long et;
|
|
|
|
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
|
|
if (i5100_spddata_busy(w))
|
|
return -1;
|
|
|
|
pci_write_config_dword(priv->mc, I5100_SPDCMD,
|
|
i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr,
|
|
0, 0));
|
|
|
|
/* wait up to 100ms */
|
|
et = jiffies + HZ / 10;
|
|
udelay(100);
|
|
while (1) {
|
|
pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
|
|
if (!i5100_spddata_busy(w))
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w))
|
|
return -1;
|
|
|
|
*byte = i5100_spddata_data(w);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* fill dimm chip select map
|
|
*
|
|
* FIXME:
|
|
* o not the only way to may chip selects to dimm slots
|
|
* o investigate if there is some way to obtain this map from the bios
|
|
*/
|
|
static void i5100_init_dimm_csmap(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
int i;
|
|
|
|
for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
|
|
int j;
|
|
|
|
for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
|
|
priv->dimm_csmap[i][j] = -1; /* default NC */
|
|
}
|
|
|
|
/* only 2 chip selects per slot... */
|
|
if (priv->ranksperchan == 4) {
|
|
priv->dimm_csmap[0][0] = 0;
|
|
priv->dimm_csmap[0][1] = 3;
|
|
priv->dimm_csmap[1][0] = 1;
|
|
priv->dimm_csmap[1][1] = 2;
|
|
priv->dimm_csmap[2][0] = 2;
|
|
priv->dimm_csmap[3][0] = 3;
|
|
} else {
|
|
priv->dimm_csmap[0][0] = 0;
|
|
priv->dimm_csmap[0][1] = 1;
|
|
priv->dimm_csmap[1][0] = 2;
|
|
priv->dimm_csmap[1][1] = 3;
|
|
priv->dimm_csmap[2][0] = 4;
|
|
priv->dimm_csmap[2][1] = 5;
|
|
}
|
|
}
|
|
|
|
static void i5100_init_dimm_layout(struct pci_dev *pdev,
|
|
struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
int i;
|
|
|
|
for (i = 0; i < I5100_CHANNELS; i++) {
|
|
int j;
|
|
|
|
for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CHAN; j++) {
|
|
u8 rank;
|
|
|
|
if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
|
|
priv->dimm_numrank[i][j] = 0;
|
|
else
|
|
priv->dimm_numrank[i][j] = (rank & 3) + 1;
|
|
}
|
|
}
|
|
|
|
i5100_init_dimm_csmap(mci);
|
|
}
|
|
|
|
static void i5100_init_interleaving(struct pci_dev *pdev,
|
|
struct mem_ctl_info *mci)
|
|
{
|
|
u16 w;
|
|
u32 dw;
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
|
|
int i;
|
|
|
|
pci_read_config_word(pdev, I5100_TOLM, &w);
|
|
priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024;
|
|
|
|
pci_read_config_word(pdev, I5100_MIR0, &w);
|
|
priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28;
|
|
priv->mir[0].way[1] = i5100_mir_way1(w);
|
|
priv->mir[0].way[0] = i5100_mir_way0(w);
|
|
|
|
pci_read_config_word(pdev, I5100_MIR1, &w);
|
|
priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28;
|
|
priv->mir[1].way[1] = i5100_mir_way1(w);
|
|
priv->mir[1].way[0] = i5100_mir_way0(w);
|
|
|
|
pci_read_config_word(pdev, I5100_AMIR_0, &w);
|
|
priv->amir[0] = w;
|
|
pci_read_config_word(pdev, I5100_AMIR_1, &w);
|
|
priv->amir[1] = w;
|
|
|
|
for (i = 0; i < I5100_CHANNELS; i++) {
|
|
int j;
|
|
|
|
for (j = 0; j < 5; j++) {
|
|
int k;
|
|
|
|
pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
|
|
|
|
priv->dmir[i][j].limit =
|
|
(u64) i5100_dmir_limit(dw) << 28;
|
|
for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
|
|
priv->dmir[i][j].rank[k] =
|
|
i5100_dmir_rank(dw, k);
|
|
}
|
|
}
|
|
|
|
i5100_init_mtr(mci);
|
|
}
|
|
|
|
static void i5100_init_csrows(struct mem_ctl_info *mci)
|
|
{
|
|
int i;
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
|
|
for (i = 0; i < mci->tot_dimms; i++) {
|
|
struct dimm_info *dimm;
|
|
const unsigned long npages = i5100_npages(mci, i);
|
|
const unsigned chan = i5100_csrow_to_chan(mci, i);
|
|
const unsigned rank = i5100_csrow_to_rank(mci, i);
|
|
|
|
if (!npages)
|
|
continue;
|
|
|
|
dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
|
|
chan, rank, 0);
|
|
|
|
dimm->nr_pages = npages;
|
|
dimm->grain = 32;
|
|
dimm->dtype = (priv->mtr[chan][rank].width == 4) ?
|
|
DEV_X4 : DEV_X8;
|
|
dimm->mtype = MEM_RDDR2;
|
|
dimm->edac_mode = EDAC_SECDED;
|
|
snprintf(dimm->label, sizeof(dimm->label), "DIMM%u",
|
|
i5100_rank_to_slot(mci, chan, rank));
|
|
|
|
edac_dbg(2, "dimm channel %d, rank %d, size %ld\n",
|
|
chan, rank, (long)PAGES_TO_MiB(npages));
|
|
}
|
|
}
|
|
|
|
/****************************************************************************
|
|
* Error injection routines
|
|
****************************************************************************/
|
|
|
|
static void i5100_do_inject(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
u32 mask0;
|
|
u16 mask1;
|
|
|
|
/* MEM[1:0]EINJMSK0
|
|
* 31 - ADDRMATCHEN
|
|
* 29:28 - HLINESEL
|
|
* 00 Reserved
|
|
* 01 Lower half of cache line
|
|
* 10 Upper half of cache line
|
|
* 11 Both upper and lower parts of cache line
|
|
* 27 - EINJEN
|
|
* 25:19 - XORMASK1 for deviceptr1
|
|
* 9:5 - SEC2RAM for deviceptr2
|
|
* 4:0 - FIR2RAM for deviceptr1
|
|
*/
|
|
mask0 = ((priv->inject_hlinesel & 0x3) << 28) |
|
|
I5100_MEMXEINJMSK0_EINJEN |
|
|
((priv->inject_eccmask1 & 0xffff) << 10) |
|
|
((priv->inject_deviceptr2 & 0x1f) << 5) |
|
|
(priv->inject_deviceptr1 & 0x1f);
|
|
|
|
/* MEM[1:0]EINJMSK1
|
|
* 15:0 - XORMASK2 for deviceptr2
|
|
*/
|
|
mask1 = priv->inject_eccmask2;
|
|
|
|
if (priv->inject_channel == 0) {
|
|
pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0);
|
|
pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1);
|
|
} else {
|
|
pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0);
|
|
pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1);
|
|
}
|
|
|
|
/* Error Injection Response Function
|
|
* Intel 5100 Memory Controller Hub Chipset (318378) datasheet
|
|
* hints about this register but carry no data about them. All
|
|
* data regarding device 19 is based on experimentation and the
|
|
* Intel 7300 Chipset Memory Controller Hub (318082) datasheet
|
|
* which appears to be accurate for the i5100 in this area.
|
|
*
|
|
* The injection code don't work without setting this register.
|
|
* The register needs to be flipped off then on else the hardware
|
|
* will only preform the first injection.
|
|
*
|
|
* Stop condition bits 7:4
|
|
* 1010 - Stop after one injection
|
|
* 1011 - Never stop injecting faults
|
|
*
|
|
* Start condition bits 3:0
|
|
* 1010 - Never start
|
|
* 1011 - Start immediately
|
|
*/
|
|
pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa);
|
|
pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab);
|
|
}
|
|
|
|
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
|
|
static ssize_t inject_enable_write(struct file *file, const char __user *data,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct device *dev = file->private_data;
|
|
struct mem_ctl_info *mci = to_mci(dev);
|
|
|
|
i5100_do_inject(mci);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations i5100_inject_enable_fops = {
|
|
.open = simple_open,
|
|
.write = inject_enable_write,
|
|
.llseek = generic_file_llseek,
|
|
};
|
|
|
|
static int i5100_setup_debugfs(struct mem_ctl_info *mci)
|
|
{
|
|
struct i5100_priv *priv = mci->pvt_info;
|
|
|
|
if (!i5100_debugfs)
|
|
return -ENODEV;
|
|
|
|
priv->debugfs = debugfs_create_dir(mci->bus->name, i5100_debugfs);
|
|
|
|
if (!priv->debugfs)
|
|
return -ENOMEM;
|
|
|
|
debugfs_create_x8("inject_channel", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_channel);
|
|
debugfs_create_x8("inject_hlinesel", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_hlinesel);
|
|
debugfs_create_x8("inject_deviceptr1", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_deviceptr1);
|
|
debugfs_create_x8("inject_deviceptr2", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_deviceptr2);
|
|
debugfs_create_x16("inject_eccmask1", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_eccmask1);
|
|
debugfs_create_x16("inject_eccmask2", S_IRUGO | S_IWUSR, priv->debugfs,
|
|
&priv->inject_eccmask2);
|
|
debugfs_create_file("inject_enable", S_IWUSR, priv->debugfs,
|
|
&mci->dev, &i5100_inject_enable_fops);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
int rc;
|
|
struct mem_ctl_info *mci;
|
|
struct edac_mc_layer layers[2];
|
|
struct i5100_priv *priv;
|
|
struct pci_dev *ch0mm, *ch1mm, *einj;
|
|
int ret = 0;
|
|
u32 dw;
|
|
int ranksperch;
|
|
|
|
if (PCI_FUNC(pdev->devfn) != 1)
|
|
return -ENODEV;
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc < 0) {
|
|
ret = rc;
|
|
goto bail;
|
|
}
|
|
|
|
/* ECC enabled? */
|
|
pci_read_config_dword(pdev, I5100_MC, &dw);
|
|
if (!i5100_mc_errdeten(dw)) {
|
|
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
|
|
ret = -ENODEV;
|
|
goto bail_pdev;
|
|
}
|
|
|
|
/* figure out how many ranks, from strapped state of 48GB_Mode input */
|
|
pci_read_config_dword(pdev, I5100_MS, &dw);
|
|
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
|
|
|
|
/* enable error reporting... */
|
|
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
|
|
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
|
|
pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
|
|
|
|
/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
|
|
ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_5100_21, 0);
|
|
if (!ch0mm) {
|
|
ret = -ENODEV;
|
|
goto bail_pdev;
|
|
}
|
|
|
|
rc = pci_enable_device(ch0mm);
|
|
if (rc < 0) {
|
|
ret = rc;
|
|
goto bail_ch0;
|
|
}
|
|
|
|
/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
|
|
ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_5100_22, 0);
|
|
if (!ch1mm) {
|
|
ret = -ENODEV;
|
|
goto bail_disable_ch0;
|
|
}
|
|
|
|
rc = pci_enable_device(ch1mm);
|
|
if (rc < 0) {
|
|
ret = rc;
|
|
goto bail_ch1;
|
|
}
|
|
|
|
layers[0].type = EDAC_MC_LAYER_CHANNEL;
|
|
layers[0].size = 2;
|
|
layers[0].is_virt_csrow = false;
|
|
layers[1].type = EDAC_MC_LAYER_SLOT;
|
|
layers[1].size = ranksperch;
|
|
layers[1].is_virt_csrow = true;
|
|
mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
|
|
sizeof(*priv));
|
|
if (!mci) {
|
|
ret = -ENOMEM;
|
|
goto bail_disable_ch1;
|
|
}
|
|
|
|
|
|
/* device 19, func 0, Error injection */
|
|
einj = pci_get_device_func(PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_5100_19, 0);
|
|
if (!einj) {
|
|
ret = -ENODEV;
|
|
goto bail_einj;
|
|
}
|
|
|
|
rc = pci_enable_device(einj);
|
|
if (rc < 0) {
|
|
ret = rc;
|
|
goto bail_disable_einj;
|
|
}
|
|
|
|
|
|
mci->pdev = &pdev->dev;
|
|
|
|
priv = mci->pvt_info;
|
|
priv->ranksperchan = ranksperch;
|
|
priv->mc = pdev;
|
|
priv->ch0mm = ch0mm;
|
|
priv->ch1mm = ch1mm;
|
|
priv->einj = einj;
|
|
|
|
INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
|
|
|
|
/* If scrubbing was already enabled by the bios, start maintaining it */
|
|
pci_read_config_dword(pdev, I5100_MC, &dw);
|
|
if (i5100_mc_scrben(dw)) {
|
|
priv->scrub_enable = 1;
|
|
schedule_delayed_work(&(priv->i5100_scrubbing),
|
|
I5100_SCRUB_REFRESH_RATE);
|
|
}
|
|
|
|
i5100_init_dimm_layout(pdev, mci);
|
|
i5100_init_interleaving(pdev, mci);
|
|
|
|
mci->mtype_cap = MEM_FLAG_FB_DDR2;
|
|
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
|
|
mci->edac_cap = EDAC_FLAG_SECDED;
|
|
mci->mod_name = "i5100_edac.c";
|
|
mci->mod_ver = "not versioned";
|
|
mci->ctl_name = "i5100";
|
|
mci->dev_name = pci_name(pdev);
|
|
mci->ctl_page_to_phys = NULL;
|
|
|
|
mci->edac_check = i5100_check_error;
|
|
mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
|
|
mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
|
|
|
|
priv->inject_channel = 0;
|
|
priv->inject_hlinesel = 0;
|
|
priv->inject_deviceptr1 = 0;
|
|
priv->inject_deviceptr2 = 0;
|
|
priv->inject_eccmask1 = 0;
|
|
priv->inject_eccmask2 = 0;
|
|
|
|
i5100_init_csrows(mci);
|
|
|
|
/* this strange construction seems to be in every driver, dunno why */
|
|
switch (edac_op_state) {
|
|
case EDAC_OPSTATE_POLL:
|
|
case EDAC_OPSTATE_NMI:
|
|
break;
|
|
default:
|
|
edac_op_state = EDAC_OPSTATE_POLL;
|
|
break;
|
|
}
|
|
|
|
if (edac_mc_add_mc(mci)) {
|
|
ret = -ENODEV;
|
|
goto bail_scrub;
|
|
}
|
|
|
|
i5100_setup_debugfs(mci);
|
|
|
|
return ret;
|
|
|
|
bail_scrub:
|
|
priv->scrub_enable = 0;
|
|
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
|
|
edac_mc_free(mci);
|
|
|
|
bail_disable_einj:
|
|
pci_disable_device(einj);
|
|
|
|
bail_einj:
|
|
pci_dev_put(einj);
|
|
|
|
bail_disable_ch1:
|
|
pci_disable_device(ch1mm);
|
|
|
|
bail_ch1:
|
|
pci_dev_put(ch1mm);
|
|
|
|
bail_disable_ch0:
|
|
pci_disable_device(ch0mm);
|
|
|
|
bail_ch0:
|
|
pci_dev_put(ch0mm);
|
|
|
|
bail_pdev:
|
|
pci_disable_device(pdev);
|
|
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
static void i5100_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct mem_ctl_info *mci;
|
|
struct i5100_priv *priv;
|
|
|
|
mci = edac_mc_del_mc(&pdev->dev);
|
|
|
|
if (!mci)
|
|
return;
|
|
|
|
priv = mci->pvt_info;
|
|
|
|
debugfs_remove_recursive(priv->debugfs);
|
|
|
|
priv->scrub_enable = 0;
|
|
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
|
|
|
|
pci_disable_device(pdev);
|
|
pci_disable_device(priv->ch0mm);
|
|
pci_disable_device(priv->ch1mm);
|
|
pci_disable_device(priv->einj);
|
|
pci_dev_put(priv->ch0mm);
|
|
pci_dev_put(priv->ch1mm);
|
|
pci_dev_put(priv->einj);
|
|
|
|
edac_mc_free(mci);
|
|
}
|
|
|
|
static const struct pci_device_id i5100_pci_tbl[] = {
|
|
/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
|
|
|
|
static struct pci_driver i5100_driver = {
|
|
.name = KBUILD_BASENAME,
|
|
.probe = i5100_init_one,
|
|
.remove = i5100_remove_one,
|
|
.id_table = i5100_pci_tbl,
|
|
};
|
|
|
|
static int __init i5100_init(void)
|
|
{
|
|
int pci_rc;
|
|
|
|
i5100_debugfs = debugfs_create_dir("i5100_edac", NULL);
|
|
|
|
pci_rc = pci_register_driver(&i5100_driver);
|
|
return (pci_rc < 0) ? pci_rc : 0;
|
|
}
|
|
|
|
static void __exit i5100_exit(void)
|
|
{
|
|
debugfs_remove(i5100_debugfs);
|
|
|
|
pci_unregister_driver(&i5100_driver);
|
|
}
|
|
|
|
module_init(i5100_init);
|
|
module_exit(i5100_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR
|
|
("Arthur Jones <ajones@riverbed.com>");
|
|
MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");
|