mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
b7d66c88c9
usb0 and usb1 mux settings in the sicrl register were swapped (twice!) in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci and full speed devices. The USB port config on mpc834x is done using 2 muxes: Port 0 is always used for MPH port 0, and port 1 can either be used for MPH port 1 or DR (unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM figure 1-4.. mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit positions of the usb0 / usb1 mux settings swapped. It would basically work if you specified port1 instead of port0 for the MPH controller (and happened to use ULPI phys), which is what all the 834x dts have done, even though that configuration is physically invalid. Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
313 lines
6.8 KiB
Plaintext
313 lines
6.8 KiB
Plaintext
/*
|
|
* Analogue & Micro ASP8347 Device Tree Source
|
|
*
|
|
* Copyright 2008 Codehermit
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "Analogue & Micro ASP8347E";
|
|
compatible = "analogue-and-micro,asp8347e";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8347@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <32768>;
|
|
i-cache-size = <32768>;
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x8000000>; // 128MB at 0
|
|
};
|
|
|
|
localbus@ff005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8347e-localbus",
|
|
"fsl,pq2pro-localbus",
|
|
"simple-bus";
|
|
reg = <0xff005000 0x1000>;
|
|
interrupts = <77 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
|
|
ranges = <
|
|
0 0 0xf0000000 0x02000000
|
|
>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x02000000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
};
|
|
};
|
|
|
|
soc8349@ff000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
ranges = <0x0 0xff000000 0x00100000>;
|
|
reg = <0xff000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
/* phy type (ULPI or SERIAL) are only types supported for MPH */
|
|
/* port = 0 or 1 */
|
|
usb@22000 {
|
|
compatible = "fsl-usb2-mph";
|
|
reg = <0x22000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <39 0x8>;
|
|
phy_type = "ulpi";
|
|
port0;
|
|
};
|
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
|
usb@23000 {
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x23000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <38 0x8>;
|
|
dr_mode = "otg";
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
local-mac-address = [ 00 08 e5 11 32 33 ];
|
|
interrupts = <32 0x8 33 0x8 34 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
linux,network-index = <0>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x520 0x20>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <17 0x8>;
|
|
reg = <0x1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <18 0x8>;
|
|
reg = <0x2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "TSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
ranges = <0x0 0x25000 0x1000>;
|
|
local-mac-address = [ 00 08 e5 11 32 34 ];
|
|
interrupts = <35 0x8 36 0x8 37 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy1>;
|
|
linux,network-index = <1>;
|
|
|
|
mdio@520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-tbi";
|
|
reg = <0x520 0x20>;
|
|
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <400000000>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <400000000>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
/* May need to remove if on a part without crypto engine */
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
num-channels = <4>;
|
|
channel-fifo-len = <24>;
|
|
exec-units-mask = <0x0000007e>;
|
|
/* desc mask is for rev2.0,
|
|
* we need runtime fixup for >2.0 */
|
|
descriptor-types-mask = <0x01010ebf>;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
|
|
linux,stdout-path = &serial0;
|
|
};
|
|
|
|
};
|