linux/drivers/base/cpu.c
Linus Torvalds 40031da445 ACPI and power management updates for 3.12-rc1
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
     of Intel Thunderbolt support on systems that use ACPI for signalling
     Thunderbolt hotplug events.  This also should make ACPIPHP work in
     some cases in which it was known to have problems.  From
     Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
 
  2) ACPI core code cleanups and dock station support cleanups from
     Jiang Liu and Rafael J Wysocki.
 
  3) Fixes for locking problems related to ACPI device hotplug from
     Rafael J Wysocki.
 
  4) ACPICA update to version 20130725 includig fixes, cleanups, support
     for more than 256 GPEs per GPE block and a change to make the ACPI
     PM Timer optional (we've seen systems without the PM Timer in the
     field already).  One of the fixes, related to the DeRefOf operator,
     is necessary to prevent some Windows 8 oriented AML from causing
     problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.
 
  5) Removal of the old and long deprecated /proc/acpi/event interface
     and related driver changes from Thomas Renninger.
 
  6) ACPI and Xen changes to make the reduced hardware sleep work with
     the latter from Ben Guthro.
 
  7) ACPI video driver cleanups and a blacklist of systems that should
     not tell the BIOS that they are compatible with Windows 8 (or ACPI
     backlight and possibly other things will not work on them).  From
     Felipe Contreras.
 
  8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
     Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
     Toshi Kani, and Wei Yongjun.
 
  9) cpufreq ondemand governor target frequency selection change to
     reduce oscillations between min and max frequencies (essentially,
     it causes the governor to choose target frequencies proportional
     to load) from Stratos Karafotis.
 
 10) cpufreq fixes allowing sysfs attributes file permissions to be
     preserved over suspend/resume cycles Srivatsa S Bhat.
 
 11) Removal of Device Tree parsing for CPU device nodes from multiple
     cpufreq drivers that required some changes related to
     of_get_cpu_node() to be made in a few architectures and in the
     driver core.  From Sudeep KarkadaNagesha.
 
 12) cpufreq core fixes and cleanups related to mutual exclusion and
     driver module references from Viresh Kumar, Lukasz Majewski and
     Rafael J Wysocki.
 
 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
     Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
     Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
     Stratos Karafotis, and Viresh Kumar.
 
 14) Fixes to prevent race conditions in coupled cpuidle from happening
     from Colin Cross.
 
 15) cpuidle core fixes and cleanups from Daniel Lezcano and
     Tuukka Tikkanen.
 
 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
     Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
     and Sahara.
 
 17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
 
 18) PNP subsystem conversion to using struct dev_pm_ops for power
     management from Shuah Khan.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSJcKhAAoJEKhOf7ml8uNsplIQAJSOshxhkkemvFOuHZ+0YIbh
 R9aufjXeDkMDBi8YtU+tB7ERth1j+0LUSM0NTnP51U7e+7eSGobA9s5jSZQj2l7r
 HFtnSOegLuKAfqwgfSLK91xa1rTFdfW0Kych9G2nuHtBIt6P0Oc59Cb5M0oy6QXs
 nVtaDEuU//tmO71+EF5HnMJHabRTrpvtn/7NbDUpU7LZYpWJrHJFT9xt1rXNab7H
 YRCATPm3kXGRg58Doc3EZE4G3D7DLvq74jWMaI089X/m5Pg1G6upqArypOy6oxdP
 p2FEzYVrb2bi8fakXp7BBeO1gCJTAqIgAkbSSZHLpGhFaeEMmb9/DWPXdm2TjzMV
 c1EEucvsqZWoprXgy12i5Hk814xN8d8nBBLg/UYiRJ44nc/hevXfyE9ZYj6bkseJ
 +GNHmZIa1QYC05nnGli4+W4kHns8EZf/gmvIxnPuco1RN2yMWagrud5/G6Dr9M2B
 hzJV6qauLVzgZso4oe79zv9aVxe/dPHKANLD/sg23WBiJJbJF1ocBlnj2Xlbpqze
 pmMUWGiO/gUiS0fmpW/lAJauza5jFmSCjE4E8R0Gyn0j4YXjmMhdEanaU6J3VuCi
 yVgEzYEth4sowq4AflMMLKYN+WmozDnK7taZRGmT0t+EKRFKLT6EgnNrkQgs1vKl
 oawD9LM4fZ8E0yroOEme
 =CgqW
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...
2013-09-03 15:59:39 -07:00

381 lines
9.3 KiB
C

/*
* CPU subsystem support
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/cpu.h>
#include <linux/topology.h>
#include <linux/device.h>
#include <linux/node.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/percpu.h>
#include <linux/acpi.h>
#include <linux/of.h>
#include "base.h"
static DEFINE_PER_CPU(struct device *, cpu_sys_devices);
static int cpu_subsys_match(struct device *dev, struct device_driver *drv)
{
/* ACPI style match is the only one that may succeed. */
if (acpi_driver_match_device(dev, drv))
return 1;
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
static void change_cpu_under_node(struct cpu *cpu,
unsigned int from_nid, unsigned int to_nid)
{
int cpuid = cpu->dev.id;
unregister_cpu_under_node(cpuid, from_nid);
register_cpu_under_node(cpuid, to_nid);
cpu->node_id = to_nid;
}
static int __ref cpu_subsys_online(struct device *dev)
{
struct cpu *cpu = container_of(dev, struct cpu, dev);
int cpuid = dev->id;
int from_nid, to_nid;
int ret = -ENODEV;
cpu_hotplug_driver_lock();
from_nid = cpu_to_node(cpuid);
if (from_nid == NUMA_NO_NODE)
goto out;
ret = cpu_up(cpuid);
/*
* When hot adding memory to memoryless node and enabling a cpu
* on the node, node number of the cpu may internally change.
*/
to_nid = cpu_to_node(cpuid);
if (from_nid != to_nid)
change_cpu_under_node(cpu, from_nid, to_nid);
out:
cpu_hotplug_driver_unlock();
return ret;
}
static int cpu_subsys_offline(struct device *dev)
{
int ret;
cpu_hotplug_driver_lock();
ret = cpu_down(dev->id);
cpu_hotplug_driver_unlock();
return ret;
}
void unregister_cpu(struct cpu *cpu)
{
int logical_cpu = cpu->dev.id;
unregister_cpu_under_node(logical_cpu, cpu_to_node(logical_cpu));
device_unregister(&cpu->dev);
per_cpu(cpu_sys_devices, logical_cpu) = NULL;
return;
}
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
static ssize_t cpu_probe_store(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t count)
{
return arch_cpu_probe(buf, count);
}
static ssize_t cpu_release_store(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t count)
{
return arch_cpu_release(buf, count);
}
static DEVICE_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store);
#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
#endif /* CONFIG_HOTPLUG_CPU */
struct bus_type cpu_subsys = {
.name = "cpu",
.dev_name = "cpu",
.match = cpu_subsys_match,
#ifdef CONFIG_HOTPLUG_CPU
.online = cpu_subsys_online,
.offline = cpu_subsys_offline,
#endif
};
EXPORT_SYMBOL_GPL(cpu_subsys);
#ifdef CONFIG_KEXEC
#include <linux/kexec.h>
static ssize_t show_crash_notes(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct cpu *cpu = container_of(dev, struct cpu, dev);
ssize_t rc;
unsigned long long addr;
int cpunum;
cpunum = cpu->dev.id;
/*
* Might be reading other cpu's data based on which cpu read thread
* has been scheduled. But cpu data (memory) is allocated once during
* boot up and this data does not change there after. Hence this
* operation should be safe. No locking required.
*/
addr = per_cpu_ptr_to_phys(per_cpu_ptr(crash_notes, cpunum));
rc = sprintf(buf, "%Lx\n", addr);
return rc;
}
static DEVICE_ATTR(crash_notes, 0400, show_crash_notes, NULL);
static ssize_t show_crash_notes_size(struct device *dev,
struct device_attribute *attr,
char *buf)
{
ssize_t rc;
rc = sprintf(buf, "%zu\n", sizeof(note_buf_t));
return rc;
}
static DEVICE_ATTR(crash_notes_size, 0400, show_crash_notes_size, NULL);
static struct attribute *crash_note_cpu_attrs[] = {
&dev_attr_crash_notes.attr,
&dev_attr_crash_notes_size.attr,
NULL
};
static struct attribute_group crash_note_cpu_attr_group = {
.attrs = crash_note_cpu_attrs,
};
#endif
static const struct attribute_group *common_cpu_attr_groups[] = {
#ifdef CONFIG_KEXEC
&crash_note_cpu_attr_group,
#endif
NULL
};
static const struct attribute_group *hotplugable_cpu_attr_groups[] = {
#ifdef CONFIG_KEXEC
&crash_note_cpu_attr_group,
#endif
NULL
};
/*
* Print cpu online, possible, present, and system maps
*/
struct cpu_attr {
struct device_attribute attr;
const struct cpumask *const * const map;
};
static ssize_t show_cpus_attr(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct cpu_attr *ca = container_of(attr, struct cpu_attr, attr);
int n = cpulist_scnprintf(buf, PAGE_SIZE-2, *(ca->map));
buf[n++] = '\n';
buf[n] = '\0';
return n;
}
#define _CPU_ATTR(name, map) \
{ __ATTR(name, 0444, show_cpus_attr, NULL), map }
/* Keep in sync with cpu_subsys_attrs */
static struct cpu_attr cpu_attrs[] = {
_CPU_ATTR(online, &cpu_online_mask),
_CPU_ATTR(possible, &cpu_possible_mask),
_CPU_ATTR(present, &cpu_present_mask),
};
/*
* Print values for NR_CPUS and offlined cpus
*/
static ssize_t print_cpus_kernel_max(struct device *dev,
struct device_attribute *attr, char *buf)
{
int n = snprintf(buf, PAGE_SIZE-2, "%d\n", NR_CPUS - 1);
return n;
}
static DEVICE_ATTR(kernel_max, 0444, print_cpus_kernel_max, NULL);
/* arch-optional setting to enable display of offline cpus >= nr_cpu_ids */
unsigned int total_cpus;
static ssize_t print_cpus_offline(struct device *dev,
struct device_attribute *attr, char *buf)
{
int n = 0, len = PAGE_SIZE-2;
cpumask_var_t offline;
/* display offline cpus < nr_cpu_ids */
if (!alloc_cpumask_var(&offline, GFP_KERNEL))
return -ENOMEM;
cpumask_andnot(offline, cpu_possible_mask, cpu_online_mask);
n = cpulist_scnprintf(buf, len, offline);
free_cpumask_var(offline);
/* display offline cpus >= nr_cpu_ids */
if (total_cpus && nr_cpu_ids < total_cpus) {
if (n && n < len)
buf[n++] = ',';
if (nr_cpu_ids == total_cpus-1)
n += snprintf(&buf[n], len - n, "%d", nr_cpu_ids);
else
n += snprintf(&buf[n], len - n, "%d-%d",
nr_cpu_ids, total_cpus-1);
}
n += snprintf(&buf[n], len - n, "\n");
return n;
}
static DEVICE_ATTR(offline, 0444, print_cpus_offline, NULL);
static void cpu_device_release(struct device *dev)
{
/*
* This is an empty function to prevent the driver core from spitting a
* warning at us. Yes, I know this is directly opposite of what the
* documentation for the driver core and kobjects say, and the author
* of this code has already been publically ridiculed for doing
* something as foolish as this. However, at this point in time, it is
* the only way to handle the issue of statically allocated cpu
* devices. The different architectures will have their cpu device
* code reworked to properly handle this in the near future, so this
* function will then be changed to correctly free up the memory held
* by the cpu device.
*
* Never copy this way of doing things, or you too will be made fun of
* on the linux-kernel list, you have been warned.
*/
}
/*
* register_cpu - Setup a sysfs device for a CPU.
* @cpu - cpu->hotpluggable field set to 1 will generate a control file in
* sysfs for this CPU.
* @num - CPU number to use when creating the device.
*
* Initialize and register the CPU device.
*/
int register_cpu(struct cpu *cpu, int num)
{
int error;
cpu->node_id = cpu_to_node(num);
memset(&cpu->dev, 0x00, sizeof(struct device));
cpu->dev.id = num;
cpu->dev.bus = &cpu_subsys;
cpu->dev.release = cpu_device_release;
cpu->dev.offline_disabled = !cpu->hotpluggable;
cpu->dev.offline = !cpu_online(num);
cpu->dev.of_node = of_get_cpu_node(num, NULL);
#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
cpu->dev.bus->uevent = arch_cpu_uevent;
#endif
cpu->dev.groups = common_cpu_attr_groups;
if (cpu->hotpluggable)
cpu->dev.groups = hotplugable_cpu_attr_groups;
error = device_register(&cpu->dev);
if (!error)
per_cpu(cpu_sys_devices, num) = &cpu->dev;
if (!error)
register_cpu_under_node(num, cpu_to_node(num));
return error;
}
struct device *get_cpu_device(unsigned cpu)
{
if (cpu < nr_cpu_ids && cpu_possible(cpu))
return per_cpu(cpu_sys_devices, cpu);
else
return NULL;
}
EXPORT_SYMBOL_GPL(get_cpu_device);
#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
static DEVICE_ATTR(modalias, 0444, arch_print_cpu_modalias, NULL);
#endif
static struct attribute *cpu_root_attrs[] = {
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
&dev_attr_probe.attr,
&dev_attr_release.attr,
#endif
&cpu_attrs[0].attr.attr,
&cpu_attrs[1].attr.attr,
&cpu_attrs[2].attr.attr,
&dev_attr_kernel_max.attr,
&dev_attr_offline.attr,
#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
&dev_attr_modalias.attr,
#endif
NULL
};
static struct attribute_group cpu_root_attr_group = {
.attrs = cpu_root_attrs,
};
static const struct attribute_group *cpu_root_attr_groups[] = {
&cpu_root_attr_group,
NULL,
};
bool cpu_is_hotpluggable(unsigned cpu)
{
struct device *dev = get_cpu_device(cpu);
return dev && container_of(dev, struct cpu, dev)->hotpluggable;
}
EXPORT_SYMBOL_GPL(cpu_is_hotpluggable);
#ifdef CONFIG_GENERIC_CPU_DEVICES
static DEFINE_PER_CPU(struct cpu, cpu_devices);
#endif
static void __init cpu_dev_register_generic(void)
{
#ifdef CONFIG_GENERIC_CPU_DEVICES
int i;
for_each_possible_cpu(i) {
if (register_cpu(&per_cpu(cpu_devices, i), i))
panic("Failed to register CPU device");
}
#endif
}
void __init cpu_dev_init(void)
{
if (subsys_system_register(&cpu_subsys, cpu_root_attr_groups))
panic("Failed to register CPU subsystem");
cpu_dev_register_generic();
}