mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 22:23:55 +00:00
cdc707f72e
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. In v6.5 it has also acquired the ability to generate multi-register writes in sync operations, bringing performance up to parity with the rbtree cache there. Update the axp20x driver to use the more modern data structure, really it should have been fine even without the most recent round of updates. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230712-mfd-axp20x-maple-v1-1-4df3749107a6@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
1351 lines
46 KiB
C
1351 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MFD core driver for the X-Powers' Power Management ICs
|
|
*
|
|
* AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
|
|
* converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
|
|
* as well as configurable GPIOs.
|
|
*
|
|
* This file contains the interface independent core functions.
|
|
*
|
|
* Copyright (C) 2014 Carlo Caione
|
|
*
|
|
* Author: Carlo Caione <carlo@caione.org>
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/axp20x.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define AXP20X_OFF BIT(7)
|
|
|
|
#define AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE 0
|
|
#define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE BIT(4)
|
|
|
|
static const char * const axp20x_model_names[] = {
|
|
"AXP152",
|
|
"AXP192",
|
|
"AXP202",
|
|
"AXP209",
|
|
"AXP221",
|
|
"AXP223",
|
|
"AXP288",
|
|
"AXP313a",
|
|
"AXP803",
|
|
"AXP806",
|
|
"AXP809",
|
|
"AXP813",
|
|
"AXP15060",
|
|
};
|
|
|
|
static const struct regmap_range axp152_writeable_ranges[] = {
|
|
regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE),
|
|
regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE),
|
|
};
|
|
|
|
static const struct regmap_range axp152_volatile_ranges[] = {
|
|
regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE),
|
|
regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE),
|
|
regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT),
|
|
};
|
|
|
|
static const struct regmap_access_table axp152_writeable_table = {
|
|
.yes_ranges = axp152_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp152_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp152_volatile_table = {
|
|
.yes_ranges = axp152_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp152_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_range axp20x_writeable_ranges[] = {
|
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
|
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2),
|
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
|
|
regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)),
|
|
};
|
|
|
|
static const struct regmap_range axp20x_volatile_ranges[] = {
|
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS),
|
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2),
|
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
|
|
regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
|
|
regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL),
|
|
regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L),
|
|
};
|
|
|
|
static const struct regmap_access_table axp20x_writeable_table = {
|
|
.yes_ranges = axp20x_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp20x_volatile_table = {
|
|
.yes_ranges = axp20x_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_range axp192_writeable_ranges[] = {
|
|
regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
|
|
regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
|
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
|
|
regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
|
|
};
|
|
|
|
static const struct regmap_range axp192_volatile_ranges[] = {
|
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
|
|
regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
|
|
regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
|
|
regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
|
|
regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
|
|
regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
|
|
regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
|
|
regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
|
|
regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
|
|
};
|
|
|
|
static const struct regmap_access_table axp192_writeable_table = {
|
|
.yes_ranges = axp192_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp192_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp192_volatile_table = {
|
|
.yes_ranges = axp192_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp192_volatile_ranges),
|
|
};
|
|
|
|
/* AXP22x ranges are shared with the AXP809, as they cover the same range */
|
|
static const struct regmap_range axp22x_writeable_ranges[] = {
|
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
|
|
regmap_reg_range(AXP20X_CHRG_CTRL1, AXP22X_CHRG_CTRL3),
|
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
|
|
};
|
|
|
|
static const struct regmap_range axp22x_volatile_ranges[] = {
|
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE),
|
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
|
|
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
|
|
regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L),
|
|
regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
|
|
};
|
|
|
|
static const struct regmap_access_table axp22x_writeable_table = {
|
|
.yes_ranges = axp22x_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp22x_volatile_table = {
|
|
.yes_ranges = axp22x_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges),
|
|
};
|
|
|
|
/* AXP288 ranges are shared with the AXP803, as they cover the same range */
|
|
static const struct regmap_range axp288_writeable_ranges[] = {
|
|
regmap_reg_range(AXP288_POWER_REASON, AXP288_POWER_REASON),
|
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
|
|
regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
|
|
};
|
|
|
|
static const struct regmap_range axp288_volatile_ranges[] = {
|
|
regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON),
|
|
regmap_reg_range(AXP22X_PWR_OUT_CTRL1, AXP22X_ALDO3_V_OUT),
|
|
regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL),
|
|
regmap_reg_range(AXP288_BC_DET_STAT, AXP20X_VBUS_IPSOUT_MGMT),
|
|
regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL),
|
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
|
|
regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
|
|
regmap_reg_range(AXP20X_GPIO1_CTRL, AXP22X_GPIO_STATE),
|
|
regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L),
|
|
regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG),
|
|
};
|
|
|
|
static const struct regmap_access_table axp288_writeable_table = {
|
|
.yes_ranges = axp288_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp288_volatile_table = {
|
|
.yes_ranges = axp288_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_range axp806_writeable_ranges[] = {
|
|
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_DATACACHE(3)),
|
|
regmap_reg_range(AXP806_PWR_OUT_CTRL1, AXP806_CLDO3_V_CTRL),
|
|
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ2_EN),
|
|
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
|
|
regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
|
|
};
|
|
|
|
static const struct regmap_range axp313a_writeable_ranges[] = {
|
|
regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
|
|
};
|
|
|
|
static const struct regmap_range axp313a_volatile_ranges[] = {
|
|
regmap_reg_range(AXP313A_SHUTDOWN_CTRL, AXP313A_SHUTDOWN_CTRL),
|
|
regmap_reg_range(AXP313A_IRQ_STATE, AXP313A_IRQ_STATE),
|
|
};
|
|
|
|
static const struct regmap_access_table axp313a_writeable_table = {
|
|
.yes_ranges = axp313a_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp313a_volatile_table = {
|
|
.yes_ranges = axp313a_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_range axp806_volatile_ranges[] = {
|
|
regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
|
|
};
|
|
|
|
static const struct regmap_access_table axp806_writeable_table = {
|
|
.yes_ranges = axp806_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp806_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp806_volatile_table = {
|
|
.yes_ranges = axp806_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_range axp15060_writeable_ranges[] = {
|
|
regmap_reg_range(AXP15060_PWR_OUT_CTRL1, AXP15060_DCDC_MODE_CTRL2),
|
|
regmap_reg_range(AXP15060_OUTPUT_MONITOR_DISCHARGE, AXP15060_CPUSLDO_V_CTRL),
|
|
regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
|
|
regmap_reg_range(AXP15060_PEK_KEY, AXP15060_PEK_KEY),
|
|
regmap_reg_range(AXP15060_IRQ1_EN, AXP15060_IRQ2_EN),
|
|
regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
|
|
};
|
|
|
|
static const struct regmap_range axp15060_volatile_ranges[] = {
|
|
regmap_reg_range(AXP15060_STARTUP_SRC, AXP15060_STARTUP_SRC),
|
|
regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
|
|
regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
|
|
};
|
|
|
|
static const struct regmap_access_table axp15060_writeable_table = {
|
|
.yes_ranges = axp15060_writeable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp15060_writeable_ranges),
|
|
};
|
|
|
|
static const struct regmap_access_table axp15060_volatile_table = {
|
|
.yes_ranges = axp15060_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(axp15060_volatile_ranges),
|
|
};
|
|
|
|
static const struct resource axp152_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp192_ac_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
|
|
};
|
|
|
|
static const struct resource axp192_usb_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
|
|
DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
|
|
};
|
|
|
|
static const struct resource axp20x_ac_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
|
|
};
|
|
|
|
static const struct resource axp20x_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp20x_usb_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
|
|
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
|
|
};
|
|
|
|
static const struct resource axp22x_usb_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
|
|
};
|
|
|
|
/* AXP803 and AXP813/AXP818 share the same interrupts */
|
|
static const struct resource axp803_usb_power_supply_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
|
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
|
|
};
|
|
|
|
static const struct resource axp22x_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp288_power_button_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKP, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKN, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp288_fuel_gauge_resources[] = {
|
|
DEFINE_RES_IRQ(AXP288_IRQ_QWBTU),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_WBTU),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_QWBTO),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_WBTO),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_WL2),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_WL1),
|
|
};
|
|
|
|
static const struct resource axp313a_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp803_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp806_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_RISE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_FALL, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp809_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct resource axp15060_pek_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
|
|
DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
|
|
};
|
|
|
|
static const struct regmap_config axp152_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp152_writeable_table,
|
|
.volatile_table = &axp152_volatile_table,
|
|
.max_register = AXP152_PWM1_DUTY_CYCLE,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static const struct regmap_config axp192_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp192_writeable_table,
|
|
.volatile_table = &axp192_volatile_table,
|
|
.max_register = AXP20X_CC_CTRL,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct regmap_config axp20x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp20x_writeable_table,
|
|
.volatile_table = &axp20x_volatile_table,
|
|
.max_register = AXP20X_OCV(AXP20X_OCV_MAX),
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static const struct regmap_config axp22x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp22x_writeable_table,
|
|
.volatile_table = &axp22x_volatile_table,
|
|
.max_register = AXP22X_BATLOW_THRES1,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static const struct regmap_config axp288_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp288_writeable_table,
|
|
.volatile_table = &axp288_volatile_table,
|
|
.max_register = AXP288_FG_TUNE5,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static const struct regmap_config axp313a_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp313a_writeable_table,
|
|
.volatile_table = &axp313a_volatile_table,
|
|
.max_register = AXP313A_IRQ_STATE,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const struct regmap_config axp806_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp806_writeable_table,
|
|
.volatile_table = &axp806_volatile_table,
|
|
.max_register = AXP806_REG_ADDR_EXT,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static const struct regmap_config axp15060_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.wr_table = &axp15060_writeable_table,
|
|
.volatile_table = &axp15060_volatile_table,
|
|
.max_register = AXP15060_IRQ2_STATE,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
|
|
[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
|
|
|
|
static const struct regmap_irq axp152_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP152, PEK_SHORT, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP152, PEK_LONG, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP152, TIMER, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT, 2, 2),
|
|
INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp192_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN, 1, 7),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP192, CHARG, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP192, CHARG_DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG, 2, 4),
|
|
INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP192, PEK_SHORT, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP192, PEK_LONG, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON, 3, 7),
|
|
INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF, 3, 6),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_VALID, 3, 5),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID, 3, 4),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID, 3, 3),
|
|
INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END, 3, 2),
|
|
INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP192, TIMER, 4, 7),
|
|
INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT, 4, 2),
|
|
INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT, 4, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp20x_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
|
|
INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
|
|
INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
|
|
INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
|
|
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
|
|
INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
|
|
INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
|
|
INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
|
|
INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
|
|
INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
|
|
INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp22x_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1),
|
|
INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7),
|
|
INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6),
|
|
INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5),
|
|
INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0),
|
|
};
|
|
|
|
/* some IRQs are compatible with axp20x models */
|
|
static const struct regmap_irq axp288_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP288, FALLING_ALT, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP288, RISING_ALT, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP288, OV_ALT, 0, 7),
|
|
|
|
INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
|
|
|
|
INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
|
|
INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
|
|
INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
|
|
|
|
INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
|
|
INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
|
|
INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
|
|
|
|
INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
|
|
INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
|
|
INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
|
|
INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
|
|
INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
|
|
INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
|
|
INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
|
|
|
|
INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
|
|
INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
|
|
};
|
|
|
|
static const struct regmap_irq axp313a_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP313A, PEK_RIS_EDGE, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP313A, PEK_FAL_EDGE, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP313A, PEK_SHORT, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP313A, PEK_LONG, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP313A, DCDC3_V_LOW, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP313A, DCDC2_V_LOW, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH, 0, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp803_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP803, ACIN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP803, VBUS_OVER_V, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP803, VBUS_PLUGIN, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP803, VBUS_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_PLUGIN, 1, 7),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_REMOVAL, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_ENT_ACT_MODE, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_EXIT_ACT_MODE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP803, CHARG, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP803, CHARG_DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH_END, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW_END, 2, 4),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH_END, 2, 2),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW_END, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP803, DIE_TEMP_HIGH, 3, 7),
|
|
INIT_REGMAP_IRQ(AXP803, GPADC, 3, 2),
|
|
INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL1, 3, 1),
|
|
INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL2, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP803, TIMER, 4, 7),
|
|
INIT_REGMAP_IRQ(AXP803, PEK_RIS_EDGE, 4, 6),
|
|
INIT_REGMAP_IRQ(AXP803, PEK_FAL_EDGE, 4, 5),
|
|
INIT_REGMAP_IRQ(AXP803, PEK_SHORT, 4, 4),
|
|
INIT_REGMAP_IRQ(AXP803, PEK_LONG, 4, 3),
|
|
INIT_REGMAP_IRQ(AXP803, PEK_OVER_OFF, 4, 2),
|
|
INIT_REGMAP_IRQ(AXP803, GPIO1_INPUT, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP803, GPIO0_INPUT, 4, 0),
|
|
INIT_REGMAP_IRQ(AXP803, BC_USB_CHNG, 5, 1),
|
|
INIT_REGMAP_IRQ(AXP803, MV_CHNG, 5, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp806_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV1, 0, 0),
|
|
INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV2, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP806, DCDCA_V_LOW, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP806, DCDCB_V_LOW, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP806, POK_LONG, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP806, POK_SHORT, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP806, WAKEUP, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP806, POK_FALL, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP806, POK_RISE, 1, 6),
|
|
};
|
|
|
|
static const struct regmap_irq axp809_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN, 1, 7),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL, 1, 6),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE, 1, 5),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP809, CHARG, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP809, CHARG_DONE, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH, 2, 7),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END, 2, 6),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW, 2, 5),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END, 2, 4),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH, 2, 3),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END, 2, 2),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW, 2, 1),
|
|
INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END, 2, 0),
|
|
INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH, 3, 7),
|
|
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1, 3, 1),
|
|
INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2, 3, 0),
|
|
INIT_REGMAP_IRQ(AXP809, TIMER, 4, 7),
|
|
INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE, 4, 6),
|
|
INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE, 4, 5),
|
|
INIT_REGMAP_IRQ(AXP809, PEK_SHORT, 4, 4),
|
|
INIT_REGMAP_IRQ(AXP809, PEK_LONG, 4, 3),
|
|
INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF, 4, 2),
|
|
INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT, 4, 1),
|
|
INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
|
|
};
|
|
|
|
static const struct regmap_irq axp15060_regmap_irqs[] = {
|
|
INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV1, 0, 0),
|
|
INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV2, 0, 1),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC1_V_LOW, 0, 2),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC2_V_LOW, 0, 3),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC3_V_LOW, 0, 4),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC4_V_LOW, 0, 5),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC5_V_LOW, 0, 6),
|
|
INIT_REGMAP_IRQ(AXP15060, DCDC6_V_LOW, 0, 7),
|
|
INIT_REGMAP_IRQ(AXP15060, PEK_LONG, 1, 0),
|
|
INIT_REGMAP_IRQ(AXP15060, PEK_SHORT, 1, 1),
|
|
INIT_REGMAP_IRQ(AXP15060, GPIO1_INPUT, 1, 2),
|
|
INIT_REGMAP_IRQ(AXP15060, PEK_FAL_EDGE, 1, 3),
|
|
INIT_REGMAP_IRQ(AXP15060, PEK_RIS_EDGE, 1, 4),
|
|
INIT_REGMAP_IRQ(AXP15060, GPIO2_INPUT, 1, 5),
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp152_regmap_irq_chip = {
|
|
.name = "axp152_irq_chip",
|
|
.status_base = AXP152_IRQ1_STATE,
|
|
.ack_base = AXP152_IRQ1_STATE,
|
|
.unmask_base = AXP152_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp152_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp152_regmap_irqs),
|
|
.num_regs = 3,
|
|
};
|
|
|
|
static unsigned int axp192_get_irq_reg(struct regmap_irq_chip_data *data,
|
|
unsigned int base, int index)
|
|
{
|
|
/* linear mapping for IRQ1 to IRQ4 */
|
|
if (index < 4)
|
|
return base + index;
|
|
|
|
/* handle IRQ5 separately */
|
|
if (base == AXP192_IRQ1_EN)
|
|
return AXP192_IRQ5_EN;
|
|
|
|
return AXP192_IRQ5_STATE;
|
|
}
|
|
|
|
static const struct regmap_irq_chip axp192_regmap_irq_chip = {
|
|
.name = "axp192_irq_chip",
|
|
.status_base = AXP192_IRQ1_STATE,
|
|
.ack_base = AXP192_IRQ1_STATE,
|
|
.unmask_base = AXP192_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp192_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp192_regmap_irqs),
|
|
.num_regs = 5,
|
|
.get_irq_reg = axp192_get_irq_reg,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
|
|
.name = "axp20x_irq_chip",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp20x_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
|
|
.num_regs = 5,
|
|
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp22x_regmap_irq_chip = {
|
|
.name = "axp22x_irq_chip",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp22x_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp22x_regmap_irqs),
|
|
.num_regs = 5,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp288_regmap_irq_chip = {
|
|
.name = "axp288_irq_chip",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp288_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
|
|
.num_regs = 6,
|
|
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
|
|
.name = "axp313a_irq_chip",
|
|
.status_base = AXP313A_IRQ_STATE,
|
|
.ack_base = AXP313A_IRQ_STATE,
|
|
.unmask_base = AXP313A_IRQ_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp313a_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp313a_regmap_irqs),
|
|
.num_regs = 1,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp803_regmap_irq_chip = {
|
|
.name = "axp803",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp803_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp803_regmap_irqs),
|
|
.num_regs = 6,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp806_regmap_irq_chip = {
|
|
.name = "axp806",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp806_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp806_regmap_irqs),
|
|
.num_regs = 2,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp809_regmap_irq_chip = {
|
|
.name = "axp809",
|
|
.status_base = AXP20X_IRQ1_STATE,
|
|
.ack_base = AXP20X_IRQ1_STATE,
|
|
.unmask_base = AXP20X_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp809_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp809_regmap_irqs),
|
|
.num_regs = 5,
|
|
};
|
|
|
|
static const struct regmap_irq_chip axp15060_regmap_irq_chip = {
|
|
.name = "axp15060",
|
|
.status_base = AXP15060_IRQ1_STATE,
|
|
.ack_base = AXP15060_IRQ1_STATE,
|
|
.unmask_base = AXP15060_IRQ1_EN,
|
|
.init_ack_masked = true,
|
|
.irqs = axp15060_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(axp15060_regmap_irqs),
|
|
.num_regs = 2,
|
|
};
|
|
|
|
static const struct mfd_cell axp192_cells[] = {
|
|
{
|
|
.name = "axp192-adc",
|
|
.of_compatible = "x-powers,axp192-adc",
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp192-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp202-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp192_ac_power_supply_resources),
|
|
.resources = axp192_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.of_compatible = "x-powers,axp192-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp192_usb_power_supply_resources),
|
|
.resources = axp192_usb_power_supply_resources,
|
|
},
|
|
{ .name = "axp20x-regulator" },
|
|
};
|
|
|
|
static const struct mfd_cell axp20x_cells[] = {
|
|
{
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp209-gpio",
|
|
}, {
|
|
.name = "axp20x-pek",
|
|
.num_resources = ARRAY_SIZE(axp20x_pek_resources),
|
|
.resources = axp20x_pek_resources,
|
|
}, {
|
|
.name = "axp20x-regulator",
|
|
}, {
|
|
.name = "axp20x-adc",
|
|
.of_compatible = "x-powers,axp209-adc",
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp209-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp202-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
|
|
.resources = axp20x_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.of_compatible = "x-powers,axp202-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_usb_power_supply_resources),
|
|
.resources = axp20x_usb_power_supply_resources,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp221_cells[] = {
|
|
{
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp221-gpio",
|
|
}, {
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
|
|
.resources = axp22x_pek_resources,
|
|
}, {
|
|
.name = "axp20x-regulator",
|
|
}, {
|
|
.name = "axp22x-adc",
|
|
.of_compatible = "x-powers,axp221-adc",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp221-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
|
|
.resources = axp20x_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp221-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.of_compatible = "x-powers,axp221-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
|
|
.resources = axp22x_usb_power_supply_resources,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp223_cells[] = {
|
|
{
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp221-gpio",
|
|
}, {
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp22x_pek_resources),
|
|
.resources = axp22x_pek_resources,
|
|
}, {
|
|
.name = "axp22x-adc",
|
|
.of_compatible = "x-powers,axp221-adc",
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp221-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-regulator",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp221-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
|
|
.resources = axp20x_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.of_compatible = "x-powers,axp223-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
|
|
.resources = axp22x_usb_power_supply_resources,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp152_cells[] = {
|
|
{
|
|
.name = "axp20x-pek",
|
|
.num_resources = ARRAY_SIZE(axp152_pek_resources),
|
|
.resources = axp152_pek_resources,
|
|
},
|
|
};
|
|
|
|
static struct mfd_cell axp313a_cells[] = {
|
|
MFD_CELL_NAME("axp20x-regulator"),
|
|
MFD_CELL_RES("axp313a-pek", axp313a_pek_resources),
|
|
};
|
|
|
|
static const struct resource axp288_adc_resources[] = {
|
|
DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
|
|
};
|
|
|
|
static const struct resource axp288_extcon_resources[] = {
|
|
DEFINE_RES_IRQ(AXP288_IRQ_VBUS_FALL),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_VBUS_RISE),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_MV_CHNG),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_BC_USB_CHNG),
|
|
};
|
|
|
|
static const struct resource axp288_charger_resources[] = {
|
|
DEFINE_RES_IRQ(AXP288_IRQ_OV),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_DONE),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_CHARGING),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_SAFE_QUIT),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_SAFE_ENTER),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_QCBTU),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_CBTU),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_QCBTO),
|
|
DEFINE_RES_IRQ(AXP288_IRQ_CBTO),
|
|
};
|
|
|
|
static const char * const axp288_fuel_gauge_suppliers[] = { "axp288_charger" };
|
|
|
|
static const struct property_entry axp288_fuel_gauge_properties[] = {
|
|
PROPERTY_ENTRY_STRING_ARRAY("supplied-from", axp288_fuel_gauge_suppliers),
|
|
{ }
|
|
};
|
|
|
|
static const struct software_node axp288_fuel_gauge_sw_node = {
|
|
.name = "axp288_fuel_gauge",
|
|
.properties = axp288_fuel_gauge_properties,
|
|
};
|
|
|
|
static const struct mfd_cell axp288_cells[] = {
|
|
{
|
|
.name = "axp288_adc",
|
|
.num_resources = ARRAY_SIZE(axp288_adc_resources),
|
|
.resources = axp288_adc_resources,
|
|
}, {
|
|
.name = "axp288_extcon",
|
|
.num_resources = ARRAY_SIZE(axp288_extcon_resources),
|
|
.resources = axp288_extcon_resources,
|
|
}, {
|
|
.name = "axp288_charger",
|
|
.num_resources = ARRAY_SIZE(axp288_charger_resources),
|
|
.resources = axp288_charger_resources,
|
|
}, {
|
|
.name = "axp288_fuel_gauge",
|
|
.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
|
|
.resources = axp288_fuel_gauge_resources,
|
|
.swnode = &axp288_fuel_gauge_sw_node,
|
|
}, {
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp288_power_button_resources),
|
|
.resources = axp288_power_button_resources,
|
|
}, {
|
|
.name = "axp288_pmic_acpi",
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp803_cells[] = {
|
|
{
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp803_pek_resources),
|
|
.resources = axp803_pek_resources,
|
|
}, {
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp813-gpio",
|
|
}, {
|
|
.name = "axp813-adc",
|
|
.of_compatible = "x-powers,axp813-adc",
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp813-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp813-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
|
|
.resources = axp20x_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources),
|
|
.resources = axp803_usb_power_supply_resources,
|
|
.of_compatible = "x-powers,axp813-usb-power-supply",
|
|
},
|
|
{ .name = "axp20x-regulator" },
|
|
};
|
|
|
|
static const struct mfd_cell axp806_self_working_cells[] = {
|
|
{
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp806_pek_resources),
|
|
.resources = axp806_pek_resources,
|
|
},
|
|
{ .name = "axp20x-regulator" },
|
|
};
|
|
|
|
static const struct mfd_cell axp806_cells[] = {
|
|
{
|
|
.id = 2,
|
|
.name = "axp20x-regulator",
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp809_cells[] = {
|
|
{
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp221-gpio",
|
|
}, {
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp809_pek_resources),
|
|
.resources = axp809_pek_resources,
|
|
}, {
|
|
.id = 1,
|
|
.name = "axp20x-regulator",
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp813_cells[] = {
|
|
{
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp803_pek_resources),
|
|
.resources = axp803_pek_resources,
|
|
}, {
|
|
.name = "axp20x-regulator",
|
|
}, {
|
|
.name = "axp20x-gpio",
|
|
.of_compatible = "x-powers,axp813-gpio",
|
|
}, {
|
|
.name = "axp813-adc",
|
|
.of_compatible = "x-powers,axp813-adc",
|
|
}, {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_compatible = "x-powers,axp813-battery-power-supply",
|
|
}, {
|
|
.name = "axp20x-ac-power-supply",
|
|
.of_compatible = "x-powers,axp813-ac-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
|
|
.resources = axp20x_ac_power_supply_resources,
|
|
}, {
|
|
.name = "axp20x-usb-power-supply",
|
|
.num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources),
|
|
.resources = axp803_usb_power_supply_resources,
|
|
.of_compatible = "x-powers,axp813-usb-power-supply",
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell axp15060_cells[] = {
|
|
{
|
|
.name = "axp221-pek",
|
|
.num_resources = ARRAY_SIZE(axp15060_pek_resources),
|
|
.resources = axp15060_pek_resources,
|
|
}, {
|
|
.name = "axp20x-regulator",
|
|
},
|
|
};
|
|
|
|
/* For boards that don't have IRQ line connected to SOC. */
|
|
static const struct mfd_cell axp_regulator_only_cells[] = {
|
|
{
|
|
.name = "axp20x-regulator",
|
|
},
|
|
};
|
|
|
|
static int axp20x_power_off(struct sys_off_data *data)
|
|
{
|
|
struct axp20x_dev *axp20x = data->cb_data;
|
|
unsigned int shutdown_reg;
|
|
|
|
switch (axp20x->variant) {
|
|
case AXP313A_ID:
|
|
shutdown_reg = AXP313A_SHUTDOWN_CTRL;
|
|
break;
|
|
default:
|
|
shutdown_reg = AXP20X_OFF_CTRL;
|
|
break;
|
|
}
|
|
|
|
regmap_write(axp20x->regmap, shutdown_reg, AXP20X_OFF);
|
|
|
|
/* Give capacitors etc. time to drain to avoid kernel panic msg. */
|
|
mdelay(500);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
int axp20x_match_device(struct axp20x_dev *axp20x)
|
|
{
|
|
struct device *dev = axp20x->dev;
|
|
const struct acpi_device_id *acpi_id;
|
|
const struct of_device_id *of_id;
|
|
|
|
if (dev->of_node) {
|
|
of_id = of_match_device(dev->driver->of_match_table, dev);
|
|
if (!of_id) {
|
|
dev_err(dev, "Unable to match OF ID\n");
|
|
return -ENODEV;
|
|
}
|
|
axp20x->variant = (long)of_id->data;
|
|
} else {
|
|
acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
|
|
if (!acpi_id || !acpi_id->driver_data) {
|
|
dev_err(dev, "Unable to match ACPI ID and data\n");
|
|
return -ENODEV;
|
|
}
|
|
axp20x->variant = (long)acpi_id->driver_data;
|
|
}
|
|
|
|
switch (axp20x->variant) {
|
|
case AXP152_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp152_cells);
|
|
axp20x->cells = axp152_cells;
|
|
axp20x->regmap_cfg = &axp152_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
|
|
break;
|
|
case AXP192_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp192_cells);
|
|
axp20x->cells = axp192_cells;
|
|
axp20x->regmap_cfg = &axp192_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp192_regmap_irq_chip;
|
|
break;
|
|
case AXP202_ID:
|
|
case AXP209_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
|
|
axp20x->cells = axp20x_cells;
|
|
axp20x->regmap_cfg = &axp20x_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
|
|
break;
|
|
case AXP221_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp221_cells);
|
|
axp20x->cells = axp221_cells;
|
|
axp20x->regmap_cfg = &axp22x_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
|
|
break;
|
|
case AXP223_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp223_cells);
|
|
axp20x->cells = axp223_cells;
|
|
axp20x->regmap_cfg = &axp22x_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
|
|
break;
|
|
case AXP288_ID:
|
|
axp20x->cells = axp288_cells;
|
|
axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
|
|
axp20x->regmap_cfg = &axp288_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
|
|
axp20x->irq_flags = IRQF_TRIGGER_LOW;
|
|
break;
|
|
case AXP313A_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
|
|
axp20x->cells = axp313a_cells;
|
|
axp20x->regmap_cfg = &axp313a_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
|
|
break;
|
|
case AXP803_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
|
|
axp20x->cells = axp803_cells;
|
|
axp20x->regmap_cfg = &axp288_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
|
|
break;
|
|
case AXP806_ID:
|
|
/*
|
|
* Don't register the power key part if in slave mode or
|
|
* if there is no interrupt line.
|
|
*/
|
|
if (of_property_read_bool(axp20x->dev->of_node,
|
|
"x-powers,self-working-mode") &&
|
|
axp20x->irq > 0) {
|
|
axp20x->nr_cells = ARRAY_SIZE(axp806_self_working_cells);
|
|
axp20x->cells = axp806_self_working_cells;
|
|
} else {
|
|
axp20x->nr_cells = ARRAY_SIZE(axp806_cells);
|
|
axp20x->cells = axp806_cells;
|
|
}
|
|
axp20x->regmap_cfg = &axp806_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp806_regmap_irq_chip;
|
|
break;
|
|
case AXP809_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
|
|
axp20x->cells = axp809_cells;
|
|
axp20x->regmap_cfg = &axp22x_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp809_regmap_irq_chip;
|
|
break;
|
|
case AXP813_ID:
|
|
axp20x->nr_cells = ARRAY_SIZE(axp813_cells);
|
|
axp20x->cells = axp813_cells;
|
|
axp20x->regmap_cfg = &axp288_regmap_config;
|
|
/*
|
|
* The IRQ table given in the datasheet is incorrect.
|
|
* In IRQ enable/status registers 1, there are separate
|
|
* IRQs for ACIN and VBUS, instead of bits [7:5] being
|
|
* the same as bits [4:2]. So it shares the same IRQs
|
|
* as the AXP803, rather than the AXP288.
|
|
*/
|
|
axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
|
|
break;
|
|
case AXP15060_ID:
|
|
/*
|
|
* Don't register the power key part if there is no interrupt
|
|
* line.
|
|
*
|
|
* Since most use cases of AXP PMICs are Allwinner SOCs, board
|
|
* designers follow Allwinner's reference design and connects
|
|
* IRQ line to SOC, there's no need for those variants to deal
|
|
* with cases that IRQ isn't connected. However, AXP15660 is
|
|
* used by some other vendors' SOCs that didn't connect IRQ
|
|
* line, we need to deal with this case.
|
|
*/
|
|
if (axp20x->irq > 0) {
|
|
axp20x->nr_cells = ARRAY_SIZE(axp15060_cells);
|
|
axp20x->cells = axp15060_cells;
|
|
} else {
|
|
axp20x->nr_cells = ARRAY_SIZE(axp_regulator_only_cells);
|
|
axp20x->cells = axp_regulator_only_cells;
|
|
}
|
|
axp20x->regmap_cfg = &axp15060_regmap_config;
|
|
axp20x->regmap_irq_chip = &axp15060_regmap_irq_chip;
|
|
break;
|
|
default:
|
|
dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
|
|
return -EINVAL;
|
|
}
|
|
dev_info(dev, "AXP20x variant %s found\n",
|
|
axp20x_model_names[axp20x->variant]);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(axp20x_match_device);
|
|
|
|
int axp20x_device_probe(struct axp20x_dev *axp20x)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* The AXP806 supports either master/standalone or slave mode.
|
|
* Slave mode allows sharing the serial bus, even with multiple
|
|
* AXP806 which all have the same hardware address.
|
|
*
|
|
* This is done with extra "serial interface address extension",
|
|
* or AXP806_BUS_ADDR_EXT, and "register address extension", or
|
|
* AXP806_REG_ADDR_EXT, registers. The former is read-only, with
|
|
* 1 bit customizable at the factory, and 1 bit depending on the
|
|
* state of an external pin. The latter is writable. The device
|
|
* will only respond to operations to its other registers when
|
|
* the these device addressing bits (in the upper 4 bits of the
|
|
* registers) match.
|
|
*
|
|
* By default we support an AXP806 chained to an AXP809 in slave
|
|
* mode. Boards which use an AXP806 in master mode can set the
|
|
* property "x-powers,master-mode" to override the default.
|
|
*/
|
|
if (axp20x->variant == AXP806_ID) {
|
|
if (of_property_read_bool(axp20x->dev->of_node,
|
|
"x-powers,master-mode") ||
|
|
of_property_read_bool(axp20x->dev->of_node,
|
|
"x-powers,self-working-mode"))
|
|
regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT,
|
|
AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE);
|
|
else
|
|
regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT,
|
|
AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE);
|
|
}
|
|
|
|
/* Only if there is an interrupt line connected towards the CPU. */
|
|
if (axp20x->irq > 0) {
|
|
ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
|
|
IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags,
|
|
-1, axp20x->regmap_irq_chip,
|
|
&axp20x->regmap_irqc);
|
|
if (ret) {
|
|
dev_err(axp20x->dev, "failed to add irq chip: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
|
|
axp20x->nr_cells, NULL, 0, NULL);
|
|
|
|
if (ret) {
|
|
dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret);
|
|
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
|
|
return ret;
|
|
}
|
|
|
|
if (axp20x->variant != AXP288_ID)
|
|
devm_register_sys_off_handler(axp20x->dev,
|
|
SYS_OFF_MODE_POWER_OFF,
|
|
SYS_OFF_PRIO_DEFAULT,
|
|
axp20x_power_off, axp20x);
|
|
|
|
dev_info(axp20x->dev, "AXP20X driver loaded\n");
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(axp20x_device_probe);
|
|
|
|
void axp20x_device_remove(struct axp20x_dev *axp20x)
|
|
{
|
|
mfd_remove_devices(axp20x->dev);
|
|
regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
|
|
}
|
|
EXPORT_SYMBOL(axp20x_device_remove);
|
|
|
|
MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
|
|
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
|
|
MODULE_LICENSE("GPL");
|