mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 02:21:36 +00:00
e3396b263c
The size calculation is not correct. It should be end - start + 1. Use resource_size() to caculate it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
805 lines
20 KiB
C
805 lines
20 KiB
C
/*
|
|
* linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
|
|
*
|
|
* Copyright (C) 2008 Marvell International Ltd.
|
|
* All rights reserved.
|
|
*
|
|
* 2009-02-16 adapted from original version for PXA168/910
|
|
* Jun Nie <njun@marvell.com>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/uaccess.h>
|
|
#include <video/pxa168fb.h>
|
|
|
|
#include "pxa168fb.h"
|
|
|
|
#define DEFAULT_REFRESH 60 /* Hz */
|
|
|
|
static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
|
|
{
|
|
/*
|
|
* Pseudocolor mode?
|
|
*/
|
|
if (var->bits_per_pixel == 8)
|
|
return PIX_FMT_PSEUDOCOLOR;
|
|
|
|
/*
|
|
* Check for 565/1555.
|
|
*/
|
|
if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
|
|
var->green.length <= 6 && var->blue.length <= 5) {
|
|
if (var->transp.length == 0) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB565;
|
|
else
|
|
return PIX_FMT_BGR565;
|
|
}
|
|
|
|
if (var->transp.length == 1 && var->green.length <= 5) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB1555;
|
|
else
|
|
return PIX_FMT_BGR1555;
|
|
}
|
|
|
|
/* fall through */
|
|
}
|
|
|
|
/*
|
|
* Check for 888/A888.
|
|
*/
|
|
if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
|
|
var->green.length <= 8 && var->blue.length <= 8) {
|
|
if (var->bits_per_pixel == 24 && var->transp.length == 0) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB888PACK;
|
|
else
|
|
return PIX_FMT_BGR888PACK;
|
|
}
|
|
|
|
if (var->bits_per_pixel == 32 && var->transp.length == 8) {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGBA888;
|
|
else
|
|
return PIX_FMT_BGRA888;
|
|
} else {
|
|
if (var->red.offset >= var->blue.offset)
|
|
return PIX_FMT_RGB888UNPACK;
|
|
else
|
|
return PIX_FMT_BGR888UNPACK;
|
|
}
|
|
|
|
/* fall through */
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
|
|
{
|
|
switch (pix_fmt) {
|
|
case PIX_FMT_RGB565:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 11; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 6;
|
|
var->blue.offset = 0; var->blue.length = 5;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_BGR565:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 0; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 6;
|
|
var->blue.offset = 11; var->blue.length = 5;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_RGB1555:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 10; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 5;
|
|
var->blue.offset = 0; var->blue.length = 5;
|
|
var->transp.offset = 15; var->transp.length = 1;
|
|
break;
|
|
case PIX_FMT_BGR1555:
|
|
var->bits_per_pixel = 16;
|
|
var->red.offset = 0; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 5;
|
|
var->blue.offset = 10; var->blue.length = 5;
|
|
var->transp.offset = 15; var->transp.length = 1;
|
|
break;
|
|
case PIX_FMT_RGB888PACK:
|
|
var->bits_per_pixel = 24;
|
|
var->red.offset = 16; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_BGR888PACK:
|
|
var->bits_per_pixel = 24;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 16; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
case PIX_FMT_RGBA888:
|
|
var->bits_per_pixel = 32;
|
|
var->red.offset = 16; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 24; var->transp.length = 8;
|
|
break;
|
|
case PIX_FMT_BGRA888:
|
|
var->bits_per_pixel = 32;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 16; var->blue.length = 8;
|
|
var->transp.offset = 24; var->transp.length = 8;
|
|
break;
|
|
case PIX_FMT_PSEUDOCOLOR:
|
|
var->bits_per_pixel = 8;
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 0; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
|
|
struct fb_videomode *mode, int pix_fmt, int ystretch)
|
|
{
|
|
struct fb_info *info = fbi->info;
|
|
|
|
set_pix_fmt(var, pix_fmt);
|
|
|
|
var->xres = mode->xres;
|
|
var->yres = mode->yres;
|
|
var->xres_virtual = max(var->xres, var->xres_virtual);
|
|
if (ystretch)
|
|
var->yres_virtual = info->fix.smem_len /
|
|
(var->xres_virtual * (var->bits_per_pixel >> 3));
|
|
else
|
|
var->yres_virtual = max(var->yres, var->yres_virtual);
|
|
var->grayscale = 0;
|
|
var->accel_flags = FB_ACCEL_NONE;
|
|
var->pixclock = mode->pixclock;
|
|
var->left_margin = mode->left_margin;
|
|
var->right_margin = mode->right_margin;
|
|
var->upper_margin = mode->upper_margin;
|
|
var->lower_margin = mode->lower_margin;
|
|
var->hsync_len = mode->hsync_len;
|
|
var->vsync_len = mode->vsync_len;
|
|
var->sync = mode->sync;
|
|
var->vmode = FB_VMODE_NONINTERLACED;
|
|
var->rotate = FB_ROTATE_UR;
|
|
}
|
|
|
|
static int pxa168fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
int pix_fmt;
|
|
|
|
/*
|
|
* Determine which pixel format we're going to use.
|
|
*/
|
|
pix_fmt = determine_best_pix_fmt(var);
|
|
if (pix_fmt < 0)
|
|
return pix_fmt;
|
|
set_pix_fmt(var, pix_fmt);
|
|
fbi->pix_fmt = pix_fmt;
|
|
|
|
/*
|
|
* Basic geometry sanity checks.
|
|
*/
|
|
if (var->xoffset + var->xres > var->xres_virtual)
|
|
return -EINVAL;
|
|
if (var->yoffset + var->yres > var->yres_virtual)
|
|
return -EINVAL;
|
|
if (var->xres + var->right_margin +
|
|
var->hsync_len + var->left_margin > 2048)
|
|
return -EINVAL;
|
|
if (var->yres + var->lower_margin +
|
|
var->vsync_len + var->upper_margin > 2048)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Check size of framebuffer.
|
|
*/
|
|
if (var->xres_virtual * var->yres_virtual *
|
|
(var->bits_per_pixel >> 3) > info->fix.smem_len)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The hardware clock divider has an integer and a fractional
|
|
* stage:
|
|
*
|
|
* clk2 = clk_in / integer_divider
|
|
* clk_out = clk2 * (1 - (fractional_divider >> 12))
|
|
*
|
|
* Calculate integer and fractional divider for given clk_in
|
|
* and clk_out.
|
|
*/
|
|
static void set_clock_divider(struct pxa168fb_info *fbi,
|
|
const struct fb_videomode *m)
|
|
{
|
|
int divider_int;
|
|
int needed_pixclk;
|
|
u64 div_result;
|
|
u32 x = 0;
|
|
|
|
/*
|
|
* Notice: The field pixclock is used by linux fb
|
|
* is in pixel second. E.g. struct fb_videomode &
|
|
* struct fb_var_screeninfo
|
|
*/
|
|
|
|
/*
|
|
* Check input values.
|
|
*/
|
|
if (!m || !m->pixclock || !m->refresh) {
|
|
dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Using PLL/AXI clock.
|
|
*/
|
|
x = 0x80000000;
|
|
|
|
/*
|
|
* Calc divider according to refresh rate.
|
|
*/
|
|
div_result = 1000000000000ll;
|
|
do_div(div_result, m->pixclock);
|
|
needed_pixclk = (u32)div_result;
|
|
|
|
divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
|
|
|
|
/* check whether divisor is too small. */
|
|
if (divider_int < 2) {
|
|
dev_warn(fbi->dev, "Warning: clock source is too slow."
|
|
"Try smaller resolution\n");
|
|
divider_int = 2;
|
|
}
|
|
|
|
/*
|
|
* Set setting to reg.
|
|
*/
|
|
x |= divider_int;
|
|
writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
|
|
}
|
|
|
|
static void set_dma_control0(struct pxa168fb_info *fbi)
|
|
{
|
|
u32 x;
|
|
|
|
/*
|
|
* Set bit to enable graphics DMA.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
x |= fbi->active ? 0x00000100 : 0;
|
|
fbi->active = 0;
|
|
|
|
/*
|
|
* If we are in a pseudo-color mode, we need to enable
|
|
* palette lookup.
|
|
*/
|
|
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
|
|
x |= 0x10000000;
|
|
|
|
/*
|
|
* Configure hardware pixel format.
|
|
*/
|
|
x &= ~(0xF << 16);
|
|
x |= (fbi->pix_fmt >> 1) << 16;
|
|
|
|
/*
|
|
* Check red and blue pixel swap.
|
|
* 1. source data swap
|
|
* 2. panel output data swap
|
|
*/
|
|
x &= ~(1 << 12);
|
|
x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
|
|
}
|
|
|
|
static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
|
|
{
|
|
u32 x;
|
|
|
|
/*
|
|
* Configure default bits: vsync triggers DMA, gated clock
|
|
* enable, power save enable, configure alpha registers to
|
|
* display 100% graphics, and set pixel command.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
|
|
x |= 0x2032ff81;
|
|
|
|
/*
|
|
* We trigger DMA on the falling edge of vsync if vsync is
|
|
* active low, or on the rising edge if vsync is active high.
|
|
*/
|
|
if (!(sync & FB_SYNC_VERT_HIGH_ACT))
|
|
x |= 0x08000000;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
|
|
}
|
|
|
|
static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int pixel_offset;
|
|
unsigned long addr;
|
|
|
|
pixel_offset = (yoffset * var->xres_virtual) + xoffset;
|
|
|
|
addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
|
|
writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
|
|
}
|
|
|
|
static void set_dumb_panel_control(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
|
|
u32 x;
|
|
|
|
/*
|
|
* Preserve enable flag.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
|
|
|
|
x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
|
|
x |= mi->gpio_output_data << 20;
|
|
x |= mi->gpio_output_mask << 12;
|
|
x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
|
|
x |= mi->invert_composite_blank ? 0x00000040 : 0;
|
|
x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
|
|
x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
|
|
x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
|
|
x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
|
|
x |= mi->invert_pixclock ? 0x00000002 : 0;
|
|
|
|
writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
}
|
|
|
|
static void set_dumb_screen_dimensions(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *v = &info->var;
|
|
int x;
|
|
int y;
|
|
|
|
x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
|
|
y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
|
|
|
|
writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
|
|
}
|
|
|
|
static int pxa168fb_set_par(struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
struct fb_videomode mode;
|
|
u32 x;
|
|
struct pxa168fb_mach_info *mi;
|
|
|
|
mi = fbi->dev->platform_data;
|
|
|
|
/*
|
|
* Set additional mode info.
|
|
*/
|
|
if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
else
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
|
|
info->fix.ypanstep = var->yres;
|
|
|
|
/*
|
|
* Disable panel output while we setup the display.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
|
|
/*
|
|
* Configure global panel parameters.
|
|
*/
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_V_H_ACTIVE);
|
|
|
|
/*
|
|
* convet var to video mode
|
|
*/
|
|
fb_var_to_videomode(&mode, &info->var);
|
|
|
|
/* Calculate clock divisor. */
|
|
set_clock_divider(fbi, &mode);
|
|
|
|
/* Configure dma ctrl regs. */
|
|
set_dma_control0(fbi);
|
|
set_dma_control1(fbi, info->var.sync);
|
|
|
|
/*
|
|
* Configure graphics DMA parameters.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
|
|
x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
|
|
writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
|
|
writel((var->yres << 16) | var->xres,
|
|
fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
|
|
|
|
/*
|
|
* Configure dumb panel ctrl regs & timings.
|
|
*/
|
|
set_dumb_panel_control(info);
|
|
set_dumb_screen_dimensions(info);
|
|
|
|
writel((var->left_margin << 16) | var->right_margin,
|
|
fbi->reg_base + LCD_SPU_H_PORCH);
|
|
writel((var->upper_margin << 16) | var->lower_margin,
|
|
fbi->reg_base + LCD_SPU_V_PORCH);
|
|
|
|
/*
|
|
* Re-enable panel output.
|
|
*/
|
|
x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
|
|
{
|
|
return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
|
|
}
|
|
|
|
static u32 to_rgb(u16 red, u16 green, u16 blue)
|
|
{
|
|
red >>= 8;
|
|
green >>= 8;
|
|
blue >>= 8;
|
|
|
|
return (red << 16) | (green << 8) | blue;
|
|
}
|
|
|
|
static int
|
|
pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
|
|
unsigned int blue, unsigned int trans, struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
u32 val;
|
|
|
|
if (info->var.grayscale)
|
|
red = green = blue = (19595 * red + 38470 * green +
|
|
7471 * blue) >> 16;
|
|
|
|
if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
|
|
val = chan_to_field(red, &info->var.red);
|
|
val |= chan_to_field(green, &info->var.green);
|
|
val |= chan_to_field(blue , &info->var.blue);
|
|
fbi->pseudo_palette[regno] = val;
|
|
}
|
|
|
|
if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
|
|
val = to_rgb(red, green, blue);
|
|
writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
|
|
writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168fb_blank(int blank, struct fb_info *info)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
|
|
fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
|
|
set_dumb_panel_control(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
set_graphics_start(info, var->xoffset, var->yoffset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct pxa168fb_info *fbi = dev_id;
|
|
u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
|
|
|
|
if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
|
|
|
|
writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
|
|
fbi->reg_base + SPU_IRQ_ISR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static struct fb_ops pxa168fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = pxa168fb_check_var,
|
|
.fb_set_par = pxa168fb_set_par,
|
|
.fb_setcolreg = pxa168fb_setcolreg,
|
|
.fb_blank = pxa168fb_blank,
|
|
.fb_pan_display = pxa168fb_pan_display,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static int __init pxa168fb_init_mode(struct fb_info *info,
|
|
struct pxa168fb_mach_info *mi)
|
|
{
|
|
struct pxa168fb_info *fbi = info->par;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int ret = 0;
|
|
u32 total_w, total_h, refresh;
|
|
u64 div_result;
|
|
const struct fb_videomode *m;
|
|
|
|
/*
|
|
* Set default value
|
|
*/
|
|
refresh = DEFAULT_REFRESH;
|
|
|
|
/* try to find best video mode. */
|
|
m = fb_find_best_mode(&info->var, &info->modelist);
|
|
if (m)
|
|
fb_videomode_to_var(&info->var, m);
|
|
|
|
/* Init settings. */
|
|
var->xres_virtual = var->xres;
|
|
var->yres_virtual = info->fix.smem_len /
|
|
(var->xres_virtual * (var->bits_per_pixel >> 3));
|
|
dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
|
|
var->xres, var->yres);
|
|
|
|
/* correct pixclock. */
|
|
total_w = var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len;
|
|
total_h = var->yres + var->upper_margin + var->lower_margin +
|
|
var->vsync_len;
|
|
|
|
div_result = 1000000000000ll;
|
|
do_div(div_result, total_w * total_h * refresh);
|
|
var->pixclock = (u32)div_result;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init pxa168fb_probe(struct platform_device *pdev)
|
|
{
|
|
struct pxa168fb_mach_info *mi;
|
|
struct fb_info *info = 0;
|
|
struct pxa168fb_info *fbi = 0;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
int irq, ret;
|
|
|
|
mi = pdev->dev.platform_data;
|
|
if (mi == NULL) {
|
|
dev_err(&pdev->dev, "no platform data defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, "LCDCLK");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "unable to get LCDCLK");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "no IO memory defined\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no IRQ defined\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
|
|
if (info == NULL) {
|
|
clk_put(clk);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialize private data */
|
|
fbi = info->par;
|
|
fbi->info = info;
|
|
fbi->clk = clk;
|
|
fbi->dev = info->dev = &pdev->dev;
|
|
fbi->panel_rbswap = mi->panel_rbswap;
|
|
fbi->is_blanked = 0;
|
|
fbi->active = mi->active;
|
|
|
|
/*
|
|
* Initialise static fb parameters.
|
|
*/
|
|
info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
|
|
FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
|
|
info->node = -1;
|
|
strlcpy(info->fix.id, mi->id, 16);
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 0;
|
|
info->fix.ypanstep = 0;
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.mmio_start = res->start;
|
|
info->fix.mmio_len = res->end - res->start + 1;
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
info->fbops = &pxa168fb_ops;
|
|
info->pseudo_palette = fbi->pseudo_palette;
|
|
|
|
/*
|
|
* Map LCD controller registers.
|
|
*/
|
|
fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
|
|
if (fbi->reg_base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto failed;
|
|
}
|
|
|
|
/*
|
|
* Allocate framebuffer memory.
|
|
*/
|
|
info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
|
|
|
|
info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
|
|
&fbi->fb_start_dma, GFP_KERNEL);
|
|
if (info->screen_base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto failed;
|
|
}
|
|
|
|
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
|
|
set_graphics_start(info, 0, 0);
|
|
|
|
/*
|
|
* Set video mode according to platform data.
|
|
*/
|
|
set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
|
|
|
|
fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
|
|
|
|
/*
|
|
* init video mode data.
|
|
*/
|
|
pxa168fb_init_mode(info, mi);
|
|
|
|
ret = pxa168fb_check_var(&info->var, info);
|
|
if (ret)
|
|
goto failed_free_fbmem;
|
|
|
|
/*
|
|
* Fill in sane defaults.
|
|
*/
|
|
ret = pxa168fb_check_var(&info->var, info);
|
|
if (ret)
|
|
goto failed;
|
|
|
|
/*
|
|
* enable controller clock
|
|
*/
|
|
clk_enable(fbi->clk);
|
|
|
|
pxa168fb_set_par(info);
|
|
|
|
/*
|
|
* Configure default register values.
|
|
*/
|
|
writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
|
|
writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
|
|
writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
|
|
writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
|
|
writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
|
|
writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
|
|
fbi->reg_base + LCD_SPU_SRAM_PARA1);
|
|
|
|
/*
|
|
* Allocate color map.
|
|
*/
|
|
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
|
|
ret = -ENOMEM;
|
|
goto failed_free_clk;
|
|
}
|
|
|
|
/*
|
|
* Register irq handler.
|
|
*/
|
|
ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
|
|
info->fix.id, fbi);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "unable to request IRQ\n");
|
|
ret = -ENXIO;
|
|
goto failed_free_cmap;
|
|
}
|
|
|
|
/*
|
|
* Enable GFX interrupt
|
|
*/
|
|
writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
|
|
|
|
/*
|
|
* Register framebuffer.
|
|
*/
|
|
ret = register_framebuffer(info);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
|
|
ret = -ENXIO;
|
|
goto failed_free_irq;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, fbi);
|
|
return 0;
|
|
|
|
failed_free_irq:
|
|
free_irq(irq, fbi);
|
|
failed_free_cmap:
|
|
fb_dealloc_cmap(&info->cmap);
|
|
failed_free_clk:
|
|
clk_disable(fbi->clk);
|
|
failed_free_fbmem:
|
|
dma_free_coherent(fbi->dev, info->fix.smem_len,
|
|
info->screen_base, fbi->fb_start_dma);
|
|
failed:
|
|
kfree(info);
|
|
clk_put(clk);
|
|
|
|
dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver pxa168fb_driver = {
|
|
.driver = {
|
|
.name = "pxa168-fb",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = pxa168fb_probe,
|
|
};
|
|
|
|
static int __devinit pxa168fb_init(void)
|
|
{
|
|
return platform_driver_register(&pxa168fb_driver);
|
|
}
|
|
module_init(pxa168fb_init);
|
|
|
|
MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
|
|
"Green Wan <gwan@marvell.com>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
|
|
MODULE_LICENSE("GPL");
|