linux/drivers/acpi/acpica/dswload.c
Bob Moore fbb7a2dc2b ACPICA: Update ACPICA copyrights to 2014.
Update ACPICA copyrights to 2014. Includes all source headers and
signons for the various tools.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:30:25 +01:00

555 lines
15 KiB
C

/******************************************************************************
*
* Module Name: dswload - Dispatcher first pass namespace load callbacks
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"
#ifdef ACPI_ASL_COMPILER
#include "acdisasm.h"
#endif
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dswload")
/*******************************************************************************
*
* FUNCTION: acpi_ds_init_callbacks
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* pass_number - 1, 2, or 3
*
* RETURN: Status
*
* DESCRIPTION: Init walk state callbacks
*
******************************************************************************/
acpi_status
acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
{
switch (pass_number) {
case 1:
walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_load1_begin_op;
walk_state->ascending_callback = acpi_ds_load1_end_op;
break;
case 2:
walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_load2_begin_op;
walk_state->ascending_callback = acpi_ds_load2_end_op;
break;
case 3:
#ifndef ACPI_NO_METHOD_EXECUTION
walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
ACPI_PARSE_DELETE_TREE;
walk_state->descending_callback = acpi_ds_exec_begin_op;
walk_state->ascending_callback = acpi_ds_exec_end_op;
#endif
break;
default:
return (AE_BAD_PARAMETER);
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load1_begin_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* out_op - Where to return op if a new one is created
*
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the loading of ACPI tables.
*
******************************************************************************/
acpi_status
acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
union acpi_parse_object ** out_op)
{
union acpi_parse_object *op;
struct acpi_namespace_node *node;
acpi_status status;
acpi_object_type object_type;
char *path;
u32 flags;
ACPI_FUNCTION_TRACE(ds_load1_begin_op);
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
/* We are only interested in opcodes that have an associated name */
if (op) {
if (!(walk_state->op_info->flags & AML_NAMED)) {
*out_op = op;
return_ACPI_STATUS(AE_OK);
}
/* Check if this object has already been installed in the namespace */
if (op->common.node) {
*out_op = op;
return_ACPI_STATUS(AE_OK);
}
}
path = acpi_ps_get_next_namestring(&walk_state->parser_state);
/* Map the raw opcode into an internal object type */
object_type = walk_state->op_info->object_type;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"State=%p Op=%p [%s]\n", walk_state, op,
acpi_ut_get_type_name(object_type)));
switch (walk_state->opcode) {
case AML_SCOPE_OP:
/*
* The target name of the Scope() operator must exist at this point so
* that we can actually open the scope to enter new names underneath it.
* Allow search-to-root for single namesegs.
*/
status =
acpi_ns_lookup(walk_state->scope_info, path, object_type,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, &(node));
#ifdef ACPI_ASL_COMPILER
if (status == AE_NOT_FOUND) {
/*
* Table disassembly:
* Target of Scope() not found. Generate an External for it, and
* insert the name into the namespace.
*/
acpi_dm_add_op_to_external_list(op, path,
ACPI_TYPE_DEVICE, 0, 0);
status =
acpi_ns_lookup(walk_state->scope_info, path,
object_type, ACPI_IMODE_LOAD_PASS1,
ACPI_NS_SEARCH_PARENT, walk_state,
&node);
}
#endif
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(path, status);
return_ACPI_STATUS(status);
}
/*
* Check to make sure that the target is
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
case ACPI_TYPE_ANY:
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
/* These are acceptable types */
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These types we will allow, but we will change the type.
* This enables some existing code of the form:
*
* Name (DEB, 0)
* Scope (DEB) { ... }
*
* Note: silently change the type here. On the second pass,
* we will report a warning
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Type override - [%4.4s] had invalid type (%s) "
"for Scope operator, changed to type ANY\n",
acpi_ut_get_node_name(node),
acpi_ut_get_type_name(node->type)));
node->type = ACPI_TYPE_ANY;
walk_state->scope_info->common.value = ACPI_TYPE_ANY;
break;
case ACPI_TYPE_METHOD:
/*
* Allow scope change to root during execution of module-level
* code. Root is typed METHOD during this time.
*/
if ((node == acpi_gbl_root_node) &&
(walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
break;
}
/*lint -fallthrough */
default:
/* All other types are an error */
ACPI_ERROR((AE_INFO,
"Invalid type (%s) for target of "
"Scope operator [%4.4s] (Cannot override)",
acpi_ut_get_type_name(node->type),
acpi_ut_get_node_name(node)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
default:
/*
* For all other named opcodes, we will enter the name into
* the namespace.
*
* Setup the search flags.
* Since we are entering a name into the namespace, we do not want to
* enable the search-to-root upsearch.
*
* There are only two conditions where it is acceptable that the name
* already exists:
* 1) the Scope() operator can reopen a scoping object that was
* previously defined (Scope, Method, Device, etc.)
* 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
* buffer_field, or Package), the name of the object is already
* in the namespace.
*/
if (walk_state->deferred_node) {
/* This name is already in the namespace, get the node */
node = walk_state->deferred_node;
status = AE_OK;
break;
}
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (walk_state->method_node) {
node = NULL;
status = AE_OK;
break;
}
flags = ACPI_NS_NO_UPSEARCH;
if ((walk_state->opcode != AML_SCOPE_OP) &&
(!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
flags |= ACPI_NS_ERROR_IF_FOUND;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"[%s] Cannot already exist\n",
acpi_ut_get_type_name(object_type)));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"[%s] Both Find or Create allowed\n",
acpi_ut_get_type_name(object_type)));
}
/*
* Enter the named type into the internal namespace. We enter the name
* as we go downward in the parse tree. Any necessary subobjects that
* involve arguments to the opcode must be created as we go back up the
* parse tree later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, path, object_type,
ACPI_IMODE_LOAD_PASS1, flags, walk_state,
&node);
if (ACPI_FAILURE(status)) {
if (status == AE_ALREADY_EXISTS) {
/* The name already exists in this scope */
if (node->flags & ANOBJ_IS_EXTERNAL) {
/*
* Allow one create on an object or segment that was
* previously declared External
*/
node->flags &= ~ANOBJ_IS_EXTERNAL;
node->type = (u8) object_type;
/* Just retyped a node, probably will need to open a scope */
if (acpi_ns_opens_scope(object_type)) {
status =
acpi_ds_scope_stack_push
(node, object_type,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS
(status);
}
}
status = AE_OK;
}
}
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(path, status);
return_ACPI_STATUS(status);
}
}
break;
}
/* Common exit */
if (!op) {
/* Create a new op */
op = acpi_ps_alloc_op(walk_state->opcode);
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
}
/* Initialize the op */
#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
op->named.path = ACPI_CAST_PTR(u8, path);
#endif
if (node) {
/*
* Put the Node in the "op" object that the parser uses, so we
* can get it again quickly when this scope is closed
*/
op->common.node = node;
op->named.name = node->name.integer;
}
acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
op);
*out_op = op;
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_load1_end_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the loading of the namespace,
* both control methods and everything else.
*
******************************************************************************/
acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
{
union acpi_parse_object *op;
acpi_object_type object_type;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ds_load1_end_op);
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
/* We are only interested in opcodes that have an associated name */
if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
return_ACPI_STATUS(AE_OK);
}
/* Get the object type to determine if we should pop the scope */
object_type = walk_state->op_info->object_type;
#ifndef ACPI_NO_METHOD_EXECUTION
if (walk_state->op_info->flags & AML_FIELD) {
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (!walk_state->method_node) {
if (walk_state->opcode == AML_FIELD_OP ||
walk_state->opcode == AML_BANK_FIELD_OP ||
walk_state->opcode == AML_INDEX_FIELD_OP) {
status =
acpi_ds_init_field_objects(op, walk_state);
}
}
return_ACPI_STATUS(status);
}
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (!walk_state->method_node) {
if (op->common.aml_opcode == AML_REGION_OP) {
status =
acpi_ex_create_region(op->named.data,
op->named.length,
(acpi_adr_space_type) ((op->
common.
value.
arg)->
common.
value.
integer),
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
status =
acpi_ex_create_region(op->named.data,
op->named.length,
ACPI_ADR_SPACE_DATA_TABLE,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
#endif
if (op->common.aml_opcode == AML_NAME_OP) {
/* For Name opcode, get the object type from the argument */
if (op->common.value.arg) {
object_type = (acpi_ps_get_opcode_info((op->common.
value.arg)->
common.
aml_opcode))->
object_type;
/* Set node type if we have a namespace node */
if (op->common.node) {
op->common.node->type = (u8) object_type;
}
}
}
/*
* If we are executing a method, do not create any namespace objects
* during the load phase, only during execution.
*/
if (!walk_state->method_node) {
if (op->common.aml_opcode == AML_METHOD_OP) {
/*
* method_op pkg_length name_string method_flags term_list
*
* Note: We must create the method node/object pair as soon as we
* see the method declaration. This allows later pass1 parsing
* of invocations of the method (need to know the number of
* arguments.)
*/
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"LOADING-Method: State=%p Op=%p NamedObj=%p\n",
walk_state, op, op->named.node));
if (!acpi_ns_get_attached_object(op->named.node)) {
walk_state->operands[0] =
ACPI_CAST_PTR(void, op->named.node);
walk_state->num_operands = 1;
status =
acpi_ds_create_operands(walk_state,
op->common.value.
arg);
if (ACPI_SUCCESS(status)) {
status =
acpi_ex_create_method(op->named.
data,
op->named.
length,
walk_state);
}
walk_state->operands[0] = NULL;
walk_state->num_operands = 0;
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
}
/* Pop the scope stack (only if loading a table) */
if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"(%s): Popping scope for Op %p\n",
acpi_ut_get_type_name(object_type), op));
status = acpi_ds_scope_stack_pop(walk_state);
}
return_ACPI_STATUS(status);
}