Olof Johansson fba31105a4 The i.MX device tree update for 3.20: ... - Update i.MX6 operating-points setting in device tree to match the latest i.MX6 data sheet - Add i.MX6SX sabreauto board support - Add imx6dl-udoo board support based off imx6q-udoo - Update sabrelite board to include I2C and HDMI support - Update the VPU compatible strings to also use cnm,coda<model> - Remove the ocram clock from the VPU node, as the clock is already provided inside the ocram node - Add system reset controller and syscon-reboot for VF610 - Update VF610 device tree to use zero based naming for GPIO nodes, so that the number scheme matches hardware manual - A number of random device additions like watchdog for VF610, sahara for i.MX53, QSPI for imx6sx-sdb board, etc. Note: the branch imx/soc was merged into imx/dt because the SNVS device tree node needs to refer to the new clock ID added by the imx/soc patch. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUwg4gAAoJEFBXWFqHsHzO1NIH/AlXPcZZQM8sYbHrvWXmvVTM JstCR6XjVvOqT9zdFbEzdgpFGvu1oSDer8tOk00hL1NZYzHJRmTr/wgNP6tsvQ0F uoRj62B+WaMMcFanTbSdzh0tJtp7HZyFkJwjWRIL76bmd4VBsHXCPw4tr3oeDLzm x62SP14eSevV8ydlZj4TA2Ej7SxV6esdPLGeylZldXKTvo8AUH9sYN/BAz7WXfYH wfQ8owW/ql7YyCSRVdhSoeGG4H9qJA9M/CdwofsorLONkUx0nrBPRQfku5Uvf8Op fydbEbZ0LAkqIVnHcLi8xgBDhjjS/7glHSx4tp+mxtDcIMzAzfAtjyrawheWqQE= =ni1W -----END PGP SIGNATURE----- Merge tag 'imx-dt-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.20" from Shawn Guo: The i.MX device tree update for 3.20: - Update i.MX6 operating-points setting in device tree to match the latest i.MX6 data sheet - Add i.MX6SX sabreauto board support - Add imx6dl-udoo board support based off imx6q-udoo - Update sabrelite board to include I2C and HDMI support - Update the VPU compatible strings to also use cnm,coda<model> - Remove the ocram clock from the VPU node, as the clock is already provided inside the ocram node - Add system reset controller and syscon-reboot for VF610 - Update VF610 device tree to use zero based naming for GPIO nodes, so that the number scheme matches hardware manual - A number of random device additions like watchdog for VF610, sahara for i.MX53, QSPI for imx6sx-sdb board, etc. Note: the branch imx/soc was merged into imx/dt because the SNVS device tree node needs to refer to the new clock ID added by the imx/soc patch. * tag 'imx-dt-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (28 commits) ARM: dts: imx28-evk: remove duplicate property ARM: vf610: use zero based naming for GPIO nodes ARM: dts: imx6q: enable dma for ecspi5 ARM: dts: vfxxx: Add SNVS node ARM: imx: clk-vf610: Add clock for SNVS ARM: imx: clk-vf610: Add clock for UART4 and UART5 ARM: imx: drop CPUIDLE_FLAG_TIME_VALID from cpuidle-imx6sx ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo ARM: imx: support arm power off in cpuidle for i.mx6sx ARM: imx: remove unnecessary setting for DSM ARM: dts: imx6sx: add i.mx6sx sabreauto board support ARM: dts: imx6sx-sdb: Add QSPI support ARM: dts: imx6qdl: Remove OCRAM clock from VPU node ARM: imx: apf51dev: add gpio-backlight support ARM: imx: correct the hardware clock gate setting for shared nodes ARM: imx: pllv3: add shift for frequency multiplier ARM vf610: add compatibilty strings of supported Vybrid SoC's ARM: i.MX53: dts: add sahara module ARM: dts: imx6dl: correct cpufreq volt/freq table ARM: dts: imx6q: update cpufreq volt/freq table ... Signed-off-by: Olof Johansson <olof@lixom.net>		2015-01-23 14:44:16 -08:00
..
bootp	ARM: 8153/1: Enable gcov support on the ARM architecture	2014-09-26 14:39:57 +01:00
compressed	ARM: 8191/1: decompressor: ensure I-side picks up relocated code	2014-11-13 23:45:20 +00:00
dts	The i.MX device tree update for 3.20:	2015-01-23 14:44:16 -08:00
.gitignore
install.sh
Makefile