linux/Documentation/devicetree/bindings/mtd
Lothar Waßmann 2a500afe1e mtd: gpmi: make blockmark swapping optional
With a flash-based BBT there is no reason to move the Factory Bad
Block Marker from the data area buffer (to where it is mapped by the
GPMI NAND controller) to the OOB buffer. Thus, make this feature
configurable via DT. This is required for the Ka-Ro electronics
platforms.

In the original code 'this->swap_block_mark' was synonymous with
'!GPMI_IS_MX23()', so use the latter at the relevant places.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-27 22:06:31 -07:00
..
arm-versatile.txt mtd: Move fdt partition documentation to a seperate file 2012-03-28 17:07:30 -06:00
atmel-dataflash.txt mtd: Move fdt partition documentation to a seperate file 2012-03-28 17:07:30 -06:00
atmel-nand.txt mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram 2013-08-05 21:07:51 +01:00
davinci-nand.txt mtd: nand: davinci: reuse driver for Keystone arch 2014-01-03 11:22:26 -08:00
denali-nand.txt mtd: denali: add a DT driver 2012-11-15 15:37:46 +02:00
elm.txt mtd: devices: elm: Removes <xx> literals in elm DT node 2013-02-04 10:07:11 +02:00
flctl-nand.txt mtd: sh_flctl: Add device tree support 2012-11-15 15:37:50 +02:00
fsl-quadspi.txt Documentation: add the binding file for Freescale QuadSPI driver 2014-04-14 11:22:58 -07:00
fsl-upm-nand.txt mtd: Move fdt partition documentation to a seperate file 2012-03-28 17:07:30 -06:00
fsmc-nand.txt mtd: nand: fsmc: update of OF support 2013-08-05 20:48:49 +01:00
gpio-control-nand.txt mtd: Move fdt partition documentation to a seperate file 2012-03-28 17:07:30 -06:00
gpmc-nand.txt MTD updates for 3.16: 2014-06-11 08:35:34 -07:00
gpmc-nor.txt doc: spelling error changes 2014-05-05 15:32:05 +02:00
gpmc-onenand.txt doc: spelling error changes 2014-05-05 15:32:05 +02:00
gpmi-nand.txt mtd: gpmi: make blockmark swapping optional 2014-07-27 22:06:31 -07:00
lpc32xx-mlc.txt mtd: add LPC32xx MLC NAND driver 2012-07-06 18:27:04 +01:00
lpc32xx-slc.txt mtd: add LPC32xx SLC NAND driver 2012-07-06 18:17:07 +01:00
m25p80.txt Documentation: mtd: update the document for m25p80 2014-05-20 16:35:32 -07:00
mtd-physmap.txt mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking 2013-02-04 09:27:33 +02:00
mxc-nand.txt mtd: mxc_nand: implement device tree probing 2012-05-13 23:03:08 -05:00
nand.txt mtd: nand: Add a devicetree binding for ECC strength and ECC step size 2014-03-10 22:42:29 -07:00
orion-nand.txt ARM: Kirkwood: Replace mrvl with marvell 2012-07-25 17:06:23 +02:00
partition.txt mtd: ofpart: add compatible check for child nodes 2013-08-05 21:12:32 +01:00
pxa3xx-nand.txt mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding 2014-05-21 12:55:09 -07:00
spear_smi.txt mtd: add device-tree support to spear_smi 2012-03-27 01:01:21 +01:00
st-fsm.txt mtd: st_spi_fsm: Add device-tree binding documentation 2014-03-20 04:17:16 -07:00