mirror of
https://github.com/torvalds/linux.git
synced 2024-12-13 14:43:03 +00:00
21083f5152
While a memX device on /sys/bus/cxl represents a CXL memory expander
control interface, a pmemX device represents the persistent memory
sub-functionality. It bridges the CXL subystem to the libnvdimm nmemX
control interface.
With this skeleton ndctl can now see persistent memory devices on a
"CXL" bus. Later patches add support for translating libnvdimm native
commands to CXL commands.
# ndctl list -BDiu -b CXL
{
"provider":"CXL",
"dev":"ndbus1",
"dimms":[
{
"dev":"nmem1",
"state":"disabled"
},
{
"dev":"nmem0",
"state":"disabled"
}
]
}
Given nvdimm_bus_unregister() removes all devices on an ndbus0 the
cxl_pmem infrastructure needs to arrange ->remove() to be triggered on
cxl_nvdimm devices to keep their enabled state synchronized with the
registration state of their corresponding device on the nvdimm_bus. In
other words, always arrange for cxl_nvdimm_driver.remove() to unregister
nvdimms from an nvdimm_bus ahead of the bus being unregistered.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162380012696.3039556.4293801691038740850.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
82 lines
2.6 KiB
C
82 lines
2.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/* Copyright(c) 2020-2021 Intel Corporation. */
|
|
#ifndef __CXL_MEM_H__
|
|
#define __CXL_MEM_H__
|
|
#include <linux/cdev.h>
|
|
#include "cxl.h"
|
|
|
|
/* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */
|
|
#define CXLMDEV_STATUS_OFFSET 0x0
|
|
#define CXLMDEV_DEV_FATAL BIT(0)
|
|
#define CXLMDEV_FW_HALT BIT(1)
|
|
#define CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2)
|
|
#define CXLMDEV_MS_NOT_READY 0
|
|
#define CXLMDEV_MS_READY 1
|
|
#define CXLMDEV_MS_ERROR 2
|
|
#define CXLMDEV_MS_DISABLED 3
|
|
#define CXLMDEV_READY(status) \
|
|
(FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) == \
|
|
CXLMDEV_MS_READY)
|
|
#define CXLMDEV_MBOX_IF_READY BIT(4)
|
|
#define CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5)
|
|
#define CXLMDEV_RESET_NEEDED_NOT 0
|
|
#define CXLMDEV_RESET_NEEDED_COLD 1
|
|
#define CXLMDEV_RESET_NEEDED_WARM 2
|
|
#define CXLMDEV_RESET_NEEDED_HOT 3
|
|
#define CXLMDEV_RESET_NEEDED_CXL 4
|
|
#define CXLMDEV_RESET_NEEDED(status) \
|
|
(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) != \
|
|
CXLMDEV_RESET_NEEDED_NOT)
|
|
|
|
/*
|
|
* An entire PCI topology full of devices should be enough for any
|
|
* config
|
|
*/
|
|
#define CXL_MEM_MAX_DEVS 65536
|
|
|
|
/**
|
|
* struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
|
|
* @dev: driver core device object
|
|
* @cdev: char dev core object for ioctl operations
|
|
* @cxlm: pointer to the parent device driver data
|
|
* @id: id number of this memdev instance.
|
|
*/
|
|
struct cxl_memdev {
|
|
struct device dev;
|
|
struct cdev cdev;
|
|
struct cxl_mem *cxlm;
|
|
int id;
|
|
};
|
|
|
|
/**
|
|
* struct cxl_mem - A CXL memory device
|
|
* @pdev: The PCI device associated with this CXL device.
|
|
* @cxlmd: Logical memory device chardev / interface
|
|
* @regs: Parsed register blocks
|
|
* @payload_size: Size of space for payload
|
|
* (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
|
|
* @lsa_size: Size of Label Storage Area
|
|
* (CXL 2.0 8.2.9.5.1.1 Identify Memory Device)
|
|
* @mbox_mutex: Mutex to synchronize mailbox access.
|
|
* @firmware_version: Firmware version for the memory device.
|
|
* @enabled_cmds: Hardware commands found enabled in CEL.
|
|
* @pmem_range: Persistent memory capacity information.
|
|
* @ram_range: Volatile memory capacity information.
|
|
*/
|
|
struct cxl_mem {
|
|
struct pci_dev *pdev;
|
|
struct cxl_memdev *cxlmd;
|
|
|
|
struct cxl_regs regs;
|
|
|
|
size_t payload_size;
|
|
size_t lsa_size;
|
|
struct mutex mbox_mutex; /* Protects device mailbox and firmware */
|
|
char firmware_version[0x10];
|
|
unsigned long *enabled_cmds;
|
|
|
|
struct range pmem_range;
|
|
struct range ram_range;
|
|
};
|
|
#endif /* __CXL_MEM_H__ */
|