mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
36168d7123
Hygon Dhyana support (Pu Wen) - sb_edac: New maintainer + fixes (Tony Luck) Error reporting improvements and fixes (Qiuxu Zhuo) - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error accounting (Fan Wu) - altera_edac: Stratix10 support and refactoring (Thor Thayer) Out of tree addition: - acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck) - the usual amount of other misc fixes and cleanups all over. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlvRbEYACgkQEsHwGGHe VUqMXRAArOg2zJd2IuAMH/QxGSpwCIWYAQRN3mhLV7ngnBQ9d12CaadxUbhFLfgK j70DkvG7a3QzeaXkm/wf0EVro590x7zi7AgAPuOJNx1gdOEJTJpT/Bc7YSN0m8R3 gjruqIVTKuaeY33tmhWN8XoMpX5W8Hmff7j1wrLxDfz/8vTPxZto/XpJaNVkmzUQ cIsDzOJzedGIeeto/dEqlwMr1sm4qddoTrVJhSsHrtnXKBRQMcxLQVL5LFtvbTPS tnXNN+xphtknzXWh151YmmEv4pPL34FN6JZOYpfViY/uTtiIuYD3O1Gsl1CVMXV7 XPGAngo5lT+HV6Nb00sv4Ncdkl0vatQVMFWynOM0eCjVU39bD4ZrfL6alxBgx0PH JEBqaGGZEs71J3/GXpFeFPiy1SiZmUTwncPCouVAwkFu1HPBfRT5yVFLnl53ITg4 Z0Hmdgd/zDkowfiXDQxKg2muFLHQwIYj1L0m0d+YfjYqoTIbPSsOsZMDlokwwHCS /AUGoi+pQCcexdeTbSfmz/8SS2shLhSudvLGtpehPiM8evff6qgzOvF7mVhaN8M7 gPUIOiiTaC5z68RqbksqlxPdDEfq+A6R+0a2VUYkma2qMHLVCCuKZ9g+XiFBJ55D f8xDzwrZ4jkVI925bsThz7wxBITGgb6cHGNw3s9XwUUbns2Oz9g= =HEJK -----END PGP SIGNATURE----- Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: "The EDAC tree was busier than usual this cycle as the shortlog below shows. Also, this pull request is carrying an ACPI DSM driver which is used to ask the platform to supply the DIMM location of a reported hardware error and thus simplify all the EDAC logic when trying to map the error address to the respective DIMM. Core EDAC updates: - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin) Hygon Dhyana support (Pu Wen) - sb_edac: New maintainer + fixes (Tony Luck) Error reporting improvements and fixes (Qiuxu Zhuo) - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error accounting (Fan Wu) - altera_edac: Stratix10 support and refactoring (Thor Thayer) Out of tree addition: - acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck) - the usual amount of other misc fixes and cleanups all over" * tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) ACPI/ADXL: Add address translation interface using an ACPI DSM EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr() EDAC, skx_edac: Fix logical channel intermediate decoding EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting EDAC, altera: Work around int-to-pointer-cast warnings EDAC, amd64: Add Hygon Dhyana support EDAC: Raise the maximum number of memory controllers arm64: dts: stratix10: Add peripheral EDAC nodes EDAC, altera: Add Stratix10 peripheral support EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine arm64: dts: stratix10: Add SDRAM node EDAC, altera: Combine Stratix10 and Arria10 probe functions arm64: dts: stratix10: Additions to EDAC System Manager EDAC, i7core: Remove set but not used variable pvt EDAC, ghes: Use CPER module handles to locate DIMMs EDAC: Correct DIMM capacity unit symbol EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions EDAC, sb_edac: Fix reporting for patrol scrubber errors EDAC, sb_edac: Return early on ADDRV bit and address type test MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c ...
2172 lines
60 KiB
C
2172 lines
60 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017-2018, Intel Corporation. All rights reserved
|
|
* Copyright Altera Corporation (C) 2014-2016. All rights reserved.
|
|
* Copyright 2011-2012 Calxeda, Inc.
|
|
*/
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/edac.h>
|
|
#include <linux/genalloc.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/types.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#include "altera_edac.h"
|
|
#include "edac_module.h"
|
|
|
|
#define EDAC_MOD_STR "altera_edac"
|
|
#define EDAC_DEVICE "Altera"
|
|
|
|
static const struct altr_sdram_prv_data c5_data = {
|
|
.ecc_ctrl_offset = CV_CTLCFG_OFST,
|
|
.ecc_ctl_en_mask = CV_CTLCFG_ECC_AUTO_EN,
|
|
.ecc_stat_offset = CV_DRAMSTS_OFST,
|
|
.ecc_stat_ce_mask = CV_DRAMSTS_SBEERR,
|
|
.ecc_stat_ue_mask = CV_DRAMSTS_DBEERR,
|
|
.ecc_saddr_offset = CV_ERRADDR_OFST,
|
|
.ecc_daddr_offset = CV_ERRADDR_OFST,
|
|
.ecc_cecnt_offset = CV_SBECOUNT_OFST,
|
|
.ecc_uecnt_offset = CV_DBECOUNT_OFST,
|
|
.ecc_irq_en_offset = CV_DRAMINTR_OFST,
|
|
.ecc_irq_en_mask = CV_DRAMINTR_INTREN,
|
|
.ecc_irq_clr_offset = CV_DRAMINTR_OFST,
|
|
.ecc_irq_clr_mask = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN),
|
|
.ecc_cnt_rst_offset = CV_DRAMINTR_OFST,
|
|
.ecc_cnt_rst_mask = CV_DRAMINTR_INTRCLR,
|
|
.ce_ue_trgr_offset = CV_CTLCFG_OFST,
|
|
.ce_set_mask = CV_CTLCFG_GEN_SB_ERR,
|
|
.ue_set_mask = CV_CTLCFG_GEN_DB_ERR,
|
|
};
|
|
|
|
static const struct altr_sdram_prv_data a10_data = {
|
|
.ecc_ctrl_offset = A10_ECCCTRL1_OFST,
|
|
.ecc_ctl_en_mask = A10_ECCCTRL1_ECC_EN,
|
|
.ecc_stat_offset = A10_INTSTAT_OFST,
|
|
.ecc_stat_ce_mask = A10_INTSTAT_SBEERR,
|
|
.ecc_stat_ue_mask = A10_INTSTAT_DBEERR,
|
|
.ecc_saddr_offset = A10_SERRADDR_OFST,
|
|
.ecc_daddr_offset = A10_DERRADDR_OFST,
|
|
.ecc_irq_en_offset = A10_ERRINTEN_OFST,
|
|
.ecc_irq_en_mask = A10_ECC_IRQ_EN_MASK,
|
|
.ecc_irq_clr_offset = A10_INTSTAT_OFST,
|
|
.ecc_irq_clr_mask = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
|
|
.ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
|
|
.ecc_cnt_rst_mask = A10_ECC_CNT_RESET_MASK,
|
|
.ce_ue_trgr_offset = A10_DIAGINTTEST_OFST,
|
|
.ce_set_mask = A10_DIAGINT_TSERRA_MASK,
|
|
.ue_set_mask = A10_DIAGINT_TDERRA_MASK,
|
|
};
|
|
|
|
/*********************** EDAC Memory Controller Functions ****************/
|
|
|
|
/* The SDRAM controller uses the EDAC Memory Controller framework. */
|
|
|
|
static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
|
|
{
|
|
struct mem_ctl_info *mci = dev_id;
|
|
struct altr_sdram_mc_data *drvdata = mci->pvt_info;
|
|
const struct altr_sdram_prv_data *priv = drvdata->data;
|
|
u32 status, err_count = 1, err_addr;
|
|
|
|
regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status);
|
|
|
|
if (status & priv->ecc_stat_ue_mask) {
|
|
regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset,
|
|
&err_addr);
|
|
if (priv->ecc_uecnt_offset)
|
|
regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset,
|
|
&err_count);
|
|
panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
|
|
err_count, err_addr);
|
|
}
|
|
if (status & priv->ecc_stat_ce_mask) {
|
|
regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
|
|
&err_addr);
|
|
if (priv->ecc_uecnt_offset)
|
|
regmap_read(drvdata->mc_vbase, priv->ecc_cecnt_offset,
|
|
&err_count);
|
|
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
|
|
err_addr >> PAGE_SHIFT,
|
|
err_addr & ~PAGE_MASK, 0,
|
|
0, 0, -1, mci->ctl_name, "");
|
|
/* Clear IRQ to resume */
|
|
regmap_write(drvdata->mc_vbase, priv->ecc_irq_clr_offset,
|
|
priv->ecc_irq_clr_mask);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
|
|
const char __user *data,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct mem_ctl_info *mci = file->private_data;
|
|
struct altr_sdram_mc_data *drvdata = mci->pvt_info;
|
|
const struct altr_sdram_prv_data *priv = drvdata->data;
|
|
u32 *ptemp;
|
|
dma_addr_t dma_handle;
|
|
u32 reg, read_reg;
|
|
|
|
ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
|
|
if (!ptemp) {
|
|
dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Inject: Buffer Allocation error\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
|
|
&read_reg);
|
|
read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask);
|
|
|
|
/* Error are injected by writing a word while the SBE or DBE
|
|
* bit in the CTLCFG register is set. Reading the word will
|
|
* trigger the SBE or DBE error and the corresponding IRQ.
|
|
*/
|
|
if (count == 3) {
|
|
edac_printk(KERN_ALERT, EDAC_MC,
|
|
"Inject Double bit error\n");
|
|
local_irq_disable();
|
|
regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
|
|
(read_reg | priv->ue_set_mask));
|
|
local_irq_enable();
|
|
} else {
|
|
edac_printk(KERN_ALERT, EDAC_MC,
|
|
"Inject Single bit error\n");
|
|
local_irq_disable();
|
|
regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
|
|
(read_reg | priv->ce_set_mask));
|
|
local_irq_enable();
|
|
}
|
|
|
|
ptemp[0] = 0x5A5A5A5A;
|
|
ptemp[1] = 0xA5A5A5A5;
|
|
|
|
/* Clear the error injection bits */
|
|
regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset, read_reg);
|
|
/* Ensure it has been written out */
|
|
wmb();
|
|
|
|
/*
|
|
* To trigger the error, we need to read the data back
|
|
* (the data was written with errors above).
|
|
* The READ_ONCE macros and printk are used to prevent the
|
|
* the compiler optimizing these reads out.
|
|
*/
|
|
reg = READ_ONCE(ptemp[0]);
|
|
read_reg = READ_ONCE(ptemp[1]);
|
|
/* Force Read */
|
|
rmb();
|
|
|
|
edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n",
|
|
reg, read_reg);
|
|
|
|
dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations altr_sdr_mc_debug_inject_fops = {
|
|
.open = simple_open,
|
|
.write = altr_sdr_mc_err_inject_write,
|
|
.llseek = generic_file_llseek,
|
|
};
|
|
|
|
static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
|
|
{
|
|
if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
|
|
return;
|
|
|
|
if (!mci->debugfs)
|
|
return;
|
|
|
|
edac_debugfs_create_file("altr_trigger", S_IWUSR, mci->debugfs, mci,
|
|
&altr_sdr_mc_debug_inject_fops);
|
|
}
|
|
|
|
/* Get total memory size from Open Firmware DTB */
|
|
static unsigned long get_total_mem(void)
|
|
{
|
|
struct device_node *np = NULL;
|
|
struct resource res;
|
|
int ret;
|
|
unsigned long total_mem = 0;
|
|
|
|
for_each_node_by_type(np, "memory") {
|
|
ret = of_address_to_resource(np, 0, &res);
|
|
if (ret)
|
|
continue;
|
|
|
|
total_mem += resource_size(&res);
|
|
}
|
|
edac_dbg(0, "total_mem 0x%lx\n", total_mem);
|
|
return total_mem;
|
|
}
|
|
|
|
static const struct of_device_id altr_sdram_ctrl_of_match[] = {
|
|
{ .compatible = "altr,sdram-edac", .data = &c5_data},
|
|
{ .compatible = "altr,sdram-edac-a10", .data = &a10_data},
|
|
{ .compatible = "altr,sdram-edac-s10", .data = &a10_data},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
|
|
|
|
static int a10_init(struct regmap *mc_vbase)
|
|
{
|
|
if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST,
|
|
A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Error setting SB IRQ mode\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Error setting trigger count\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int a10_unmask_irq(struct platform_device *pdev, u32 mask)
|
|
{
|
|
void __iomem *sm_base;
|
|
int ret = 0;
|
|
|
|
if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32),
|
|
dev_name(&pdev->dev))) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Unable to request mem region\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32));
|
|
if (!sm_base) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Unable to ioremap device\n");
|
|
|
|
ret = -ENOMEM;
|
|
goto release;
|
|
}
|
|
|
|
iowrite32(mask, sm_base);
|
|
|
|
iounmap(sm_base);
|
|
|
|
release:
|
|
release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int socfpga_is_a10(void);
|
|
static int altr_sdram_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *id;
|
|
struct edac_mc_layer layers[2];
|
|
struct mem_ctl_info *mci;
|
|
struct altr_sdram_mc_data *drvdata;
|
|
const struct altr_sdram_prv_data *priv;
|
|
struct regmap *mc_vbase;
|
|
struct dimm_info *dimm;
|
|
u32 read_reg;
|
|
int irq, irq2, res = 0;
|
|
unsigned long mem_size, irqflags = 0;
|
|
|
|
id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
|
|
if (!id)
|
|
return -ENODEV;
|
|
|
|
/* Grab the register range from the sdr controller in device tree */
|
|
mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
|
"altr,sdr-syscon");
|
|
if (IS_ERR(mc_vbase)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"regmap for altr,sdr-syscon lookup failed.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Check specific dependencies for the module */
|
|
priv = of_match_node(altr_sdram_ctrl_of_match,
|
|
pdev->dev.of_node)->data;
|
|
|
|
/* Validate the SDRAM controller has ECC enabled */
|
|
if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) ||
|
|
((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"No ECC/ECC disabled [0x%08X]\n", read_reg);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Grab memory size from device tree. */
|
|
mem_size = get_total_mem();
|
|
if (!mem_size) {
|
|
edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Ensure the SDRAM Interrupt is disabled */
|
|
if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset,
|
|
priv->ecc_irq_en_mask, 0)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Error disabling SDRAM ECC IRQ\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Toggle to clear the SDRAM Error count */
|
|
if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
|
|
priv->ecc_cnt_rst_mask,
|
|
priv->ecc_cnt_rst_mask)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Error clearing SDRAM ECC count\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
|
|
priv->ecc_cnt_rst_mask, 0)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Error clearing SDRAM ECC count\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"No irq %d in DT\n", irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Arria10 has a 2nd IRQ */
|
|
irq2 = platform_get_irq(pdev, 1);
|
|
|
|
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
|
|
layers[0].size = 1;
|
|
layers[0].is_virt_csrow = true;
|
|
layers[1].type = EDAC_MC_LAYER_CHANNEL;
|
|
layers[1].size = 1;
|
|
layers[1].is_virt_csrow = false;
|
|
mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
|
|
sizeof(struct altr_sdram_mc_data));
|
|
if (!mci)
|
|
return -ENOMEM;
|
|
|
|
mci->pdev = &pdev->dev;
|
|
drvdata = mci->pvt_info;
|
|
drvdata->mc_vbase = mc_vbase;
|
|
drvdata->data = priv;
|
|
platform_set_drvdata(pdev, mci);
|
|
|
|
if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"Unable to get managed device resource\n");
|
|
res = -ENOMEM;
|
|
goto free;
|
|
}
|
|
|
|
mci->mtype_cap = MEM_FLAG_DDR3;
|
|
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
|
|
mci->edac_cap = EDAC_FLAG_SECDED;
|
|
mci->mod_name = EDAC_MOD_STR;
|
|
mci->ctl_name = dev_name(&pdev->dev);
|
|
mci->scrub_mode = SCRUB_SW_SRC;
|
|
mci->dev_name = dev_name(&pdev->dev);
|
|
|
|
dimm = *mci->dimms;
|
|
dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
|
|
dimm->grain = 8;
|
|
dimm->dtype = DEV_X8;
|
|
dimm->mtype = MEM_DDR3;
|
|
dimm->edac_mode = EDAC_SECDED;
|
|
|
|
res = edac_mc_add_mc(mci);
|
|
if (res < 0)
|
|
goto err;
|
|
|
|
/* Only the Arria10 has separate IRQs */
|
|
if (socfpga_is_a10()) {
|
|
/* Arria10 specific initialization */
|
|
res = a10_init(mc_vbase);
|
|
if (res < 0)
|
|
goto err2;
|
|
|
|
res = devm_request_irq(&pdev->dev, irq2,
|
|
altr_sdram_mc_err_handler,
|
|
IRQF_SHARED, dev_name(&pdev->dev), mci);
|
|
if (res < 0) {
|
|
edac_mc_printk(mci, KERN_ERR,
|
|
"Unable to request irq %d\n", irq2);
|
|
res = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
|
|
if (res < 0)
|
|
goto err2;
|
|
|
|
irqflags = IRQF_SHARED;
|
|
}
|
|
|
|
res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
|
|
irqflags, dev_name(&pdev->dev), mci);
|
|
if (res < 0) {
|
|
edac_mc_printk(mci, KERN_ERR,
|
|
"Unable to request irq %d\n", irq);
|
|
res = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
/* Infrastructure ready - enable the IRQ */
|
|
if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
|
|
priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
|
|
edac_mc_printk(mci, KERN_ERR,
|
|
"Error enabling SDRAM ECC IRQ\n");
|
|
res = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
altr_sdr_mc_create_debugfs_nodes(mci);
|
|
|
|
devres_close_group(&pdev->dev, NULL);
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
edac_mc_del_mc(&pdev->dev);
|
|
err:
|
|
devres_release_group(&pdev->dev, NULL);
|
|
free:
|
|
edac_mc_free(mci);
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"EDAC Probe Failed; Error %d\n", res);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int altr_sdram_remove(struct platform_device *pdev)
|
|
{
|
|
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
|
|
|
|
edac_mc_del_mc(&pdev->dev);
|
|
edac_mc_free(mci);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**************** Stratix 10 EDAC Memory Controller Functions ************/
|
|
|
|
/**
|
|
* s10_protected_reg_write
|
|
* Write to a protected SMC register.
|
|
* @context: Not used.
|
|
* @reg: Address of register
|
|
* @value: Value to write
|
|
* Return: INTEL_SIP_SMC_STATUS_OK (0) on success
|
|
* INTEL_SIP_SMC_REG_ERROR on error
|
|
* INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
|
|
*/
|
|
static int s10_protected_reg_write(void *context, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct arm_smccc_res result;
|
|
unsigned long offset = (unsigned long)context;
|
|
|
|
arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, offset + reg, val, 0, 0,
|
|
0, 0, 0, &result);
|
|
|
|
return (int)result.a0;
|
|
}
|
|
|
|
/**
|
|
* s10_protected_reg_read
|
|
* Read the status of a protected SMC register
|
|
* @context: Not used.
|
|
* @reg: Address of register
|
|
* @value: Value read.
|
|
* Return: INTEL_SIP_SMC_STATUS_OK (0) on success
|
|
* INTEL_SIP_SMC_REG_ERROR on error
|
|
* INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
|
|
*/
|
|
static int s10_protected_reg_read(void *context, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
struct arm_smccc_res result;
|
|
unsigned long offset = (unsigned long)context;
|
|
|
|
arm_smccc_smc(INTEL_SIP_SMC_REG_READ, offset + reg, 0, 0, 0,
|
|
0, 0, 0, &result);
|
|
|
|
*val = (unsigned int)result.a1;
|
|
|
|
return (int)result.a0;
|
|
}
|
|
|
|
static const struct regmap_config s10_sdram_regmap_cfg = {
|
|
.name = "s10_ddr",
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.max_register = 0xffd12228,
|
|
.reg_read = s10_protected_reg_read,
|
|
.reg_write = s10_protected_reg_write,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
/************** </Stratix10 EDAC Memory Controller Functions> ***********/
|
|
|
|
/*
|
|
* If you want to suspend, need to disable EDAC by removing it
|
|
* from the device tree or defconfig.
|
|
*/
|
|
#ifdef CONFIG_PM
|
|
static int altr_sdram_prepare(struct device *dev)
|
|
{
|
|
pr_err("Suspend not allowed when EDAC is enabled.\n");
|
|
|
|
return -EPERM;
|
|
}
|
|
|
|
static const struct dev_pm_ops altr_sdram_pm_ops = {
|
|
.prepare = altr_sdram_prepare,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver altr_sdram_edac_driver = {
|
|
.probe = altr_sdram_probe,
|
|
.remove = altr_sdram_remove,
|
|
.driver = {
|
|
.name = "altr_sdram_edac",
|
|
#ifdef CONFIG_PM
|
|
.pm = &altr_sdram_pm_ops,
|
|
#endif
|
|
.of_match_table = altr_sdram_ctrl_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(altr_sdram_edac_driver);
|
|
|
|
/************************* EDAC Parent Probe *************************/
|
|
|
|
static const struct of_device_id altr_edac_device_of_match[];
|
|
|
|
static const struct of_device_id altr_edac_of_match[] = {
|
|
{ .compatible = "altr,socfpga-ecc-manager" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altr_edac_of_match);
|
|
|
|
static int altr_edac_probe(struct platform_device *pdev)
|
|
{
|
|
of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match,
|
|
NULL, &pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver altr_edac_driver = {
|
|
.probe = altr_edac_probe,
|
|
.driver = {
|
|
.name = "socfpga_ecc_manager",
|
|
.of_match_table = altr_edac_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(altr_edac_driver);
|
|
|
|
/************************* EDAC Device Functions *************************/
|
|
|
|
/*
|
|
* EDAC Device Functions (shared between various IPs).
|
|
* The discrete memories use the EDAC Device framework. The probe
|
|
* and error handling functions are very similar between memories
|
|
* so they are shared. The memory allocation and freeing for EDAC
|
|
* trigger testing are different for each memory.
|
|
*/
|
|
|
|
static const struct edac_device_prv_data ocramecc_data;
|
|
static const struct edac_device_prv_data l2ecc_data;
|
|
static const struct edac_device_prv_data a10_ocramecc_data;
|
|
static const struct edac_device_prv_data a10_l2ecc_data;
|
|
|
|
static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
|
|
{
|
|
irqreturn_t ret_value = IRQ_NONE;
|
|
struct edac_device_ctl_info *dci = dev_id;
|
|
struct altr_edac_device_dev *drvdata = dci->pvt_info;
|
|
const struct edac_device_prv_data *priv = drvdata->data;
|
|
|
|
if (irq == drvdata->sb_irq) {
|
|
if (priv->ce_clear_mask)
|
|
writel(priv->ce_clear_mask, drvdata->base);
|
|
edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
|
|
ret_value = IRQ_HANDLED;
|
|
} else if (irq == drvdata->db_irq) {
|
|
if (priv->ue_clear_mask)
|
|
writel(priv->ue_clear_mask, drvdata->base);
|
|
edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
|
|
panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
|
|
ret_value = IRQ_HANDLED;
|
|
} else {
|
|
WARN_ON(1);
|
|
}
|
|
|
|
return ret_value;
|
|
}
|
|
|
|
static ssize_t altr_edac_device_trig(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
|
|
{
|
|
u32 *ptemp, i, error_mask;
|
|
int result = 0;
|
|
u8 trig_type;
|
|
unsigned long flags;
|
|
struct edac_device_ctl_info *edac_dci = file->private_data;
|
|
struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
|
|
const struct edac_device_prv_data *priv = drvdata->data;
|
|
void *generic_ptr = edac_dci->dev;
|
|
|
|
if (!user_buf || get_user(trig_type, user_buf))
|
|
return -EFAULT;
|
|
|
|
if (!priv->alloc_mem)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Note that generic_ptr is initialized to the device * but in
|
|
* some alloc_functions, this is overridden and returns data.
|
|
*/
|
|
ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
|
|
if (!ptemp) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Inject: Buffer Allocation error\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (trig_type == ALTR_UE_TRIGGER_CHAR)
|
|
error_mask = priv->ue_set_mask;
|
|
else
|
|
error_mask = priv->ce_set_mask;
|
|
|
|
edac_printk(KERN_ALERT, EDAC_DEVICE,
|
|
"Trigger Error Mask (0x%X)\n", error_mask);
|
|
|
|
local_irq_save(flags);
|
|
/* write ECC corrupted data out. */
|
|
for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) {
|
|
/* Read data so we're in the correct state */
|
|
rmb();
|
|
if (READ_ONCE(ptemp[i]))
|
|
result = -1;
|
|
/* Toggle Error bit (it is latched), leave ECC enabled */
|
|
writel(error_mask, (drvdata->base + priv->set_err_ofst));
|
|
writel(priv->ecc_enable_mask, (drvdata->base +
|
|
priv->set_err_ofst));
|
|
ptemp[i] = i;
|
|
}
|
|
/* Ensure it has been written out */
|
|
wmb();
|
|
local_irq_restore(flags);
|
|
|
|
if (result)
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n");
|
|
|
|
/* Read out written data. ECC error caused here */
|
|
for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++)
|
|
if (READ_ONCE(ptemp[i]) != i)
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Read doesn't match written data\n");
|
|
|
|
if (priv->free_mem)
|
|
priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);
|
|
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations altr_edac_device_inject_fops = {
|
|
.open = simple_open,
|
|
.write = altr_edac_device_trig,
|
|
.llseek = generic_file_llseek,
|
|
};
|
|
|
|
static ssize_t altr_edac_a10_device_trig(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos);
|
|
|
|
static const struct file_operations altr_edac_a10_device_inject_fops = {
|
|
.open = simple_open,
|
|
.write = altr_edac_a10_device_trig,
|
|
.llseek = generic_file_llseek,
|
|
};
|
|
|
|
static ssize_t altr_edac_a10_device_trig2(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos);
|
|
|
|
static const struct file_operations altr_edac_a10_device_inject2_fops = {
|
|
.open = simple_open,
|
|
.write = altr_edac_a10_device_trig2,
|
|
.llseek = generic_file_llseek,
|
|
};
|
|
|
|
static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
|
|
const struct edac_device_prv_data *priv)
|
|
{
|
|
struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
|
|
|
|
if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
|
|
return;
|
|
|
|
drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name);
|
|
if (!drvdata->debugfs_dir)
|
|
return;
|
|
|
|
if (!edac_debugfs_create_file("altr_trigger", S_IWUSR,
|
|
drvdata->debugfs_dir, edac_dci,
|
|
priv->inject_fops))
|
|
debugfs_remove_recursive(drvdata->debugfs_dir);
|
|
}
|
|
|
|
static const struct of_device_id altr_edac_device_of_match[] = {
|
|
#ifdef CONFIG_EDAC_ALTERA_L2C
|
|
{ .compatible = "altr,socfpga-l2-ecc", .data = &l2ecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_OCRAM
|
|
{ .compatible = "altr,socfpga-ocram-ecc", .data = &ocramecc_data },
|
|
#endif
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altr_edac_device_of_match);
|
|
|
|
/*
|
|
* altr_edac_device_probe()
|
|
* This is a generic EDAC device driver that will support
|
|
* various Altera memory devices such as the L2 cache ECC and
|
|
* OCRAM ECC as well as the memories for other peripherals.
|
|
* Module specific initialization is done by passing the
|
|
* function index in the device tree.
|
|
*/
|
|
static int altr_edac_device_probe(struct platform_device *pdev)
|
|
{
|
|
struct edac_device_ctl_info *dci;
|
|
struct altr_edac_device_dev *drvdata;
|
|
struct resource *r;
|
|
int res = 0;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
char *ecc_name = (char *)np->name;
|
|
static int dev_instance;
|
|
|
|
if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to open devm\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to get mem resource\n");
|
|
res = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
|
|
dev_name(&pdev->dev))) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s:Error requesting mem region\n", ecc_name);
|
|
res = -EBUSY;
|
|
goto fail;
|
|
}
|
|
|
|
dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
|
|
1, ecc_name, 1, 0, NULL, 0,
|
|
dev_instance++);
|
|
|
|
if (!dci) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s: Unable to allocate EDAC device\n", ecc_name);
|
|
res = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
drvdata = dci->pvt_info;
|
|
dci->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, dci);
|
|
drvdata->edac_dev_name = ecc_name;
|
|
|
|
drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
|
|
if (!drvdata->base) {
|
|
res = -ENOMEM;
|
|
goto fail1;
|
|
}
|
|
|
|
/* Get driver specific data for this EDAC device */
|
|
drvdata->data = of_match_node(altr_edac_device_of_match, np)->data;
|
|
|
|
/* Check specific dependencies for the module */
|
|
if (drvdata->data->setup) {
|
|
res = drvdata->data->setup(drvdata);
|
|
if (res)
|
|
goto fail1;
|
|
}
|
|
|
|
drvdata->sb_irq = platform_get_irq(pdev, 0);
|
|
res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
|
|
altr_edac_device_handler,
|
|
0, dev_name(&pdev->dev), dci);
|
|
if (res)
|
|
goto fail1;
|
|
|
|
drvdata->db_irq = platform_get_irq(pdev, 1);
|
|
res = devm_request_irq(&pdev->dev, drvdata->db_irq,
|
|
altr_edac_device_handler,
|
|
0, dev_name(&pdev->dev), dci);
|
|
if (res)
|
|
goto fail1;
|
|
|
|
dci->mod_name = "Altera ECC Manager";
|
|
dci->dev_name = drvdata->edac_dev_name;
|
|
|
|
res = edac_device_add_device(dci);
|
|
if (res)
|
|
goto fail1;
|
|
|
|
altr_create_edacdev_dbgfs(dci, drvdata->data);
|
|
|
|
devres_close_group(&pdev->dev, NULL);
|
|
|
|
return 0;
|
|
|
|
fail1:
|
|
edac_device_free_ctl_info(dci);
|
|
fail:
|
|
devres_release_group(&pdev->dev, NULL);
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s:Error setting up EDAC device: %d\n", ecc_name, res);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int altr_edac_device_remove(struct platform_device *pdev)
|
|
{
|
|
struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
|
|
struct altr_edac_device_dev *drvdata = dci->pvt_info;
|
|
|
|
debugfs_remove_recursive(drvdata->debugfs_dir);
|
|
edac_device_del_device(&pdev->dev);
|
|
edac_device_free_ctl_info(dci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver altr_edac_device_driver = {
|
|
.probe = altr_edac_device_probe,
|
|
.remove = altr_edac_device_remove,
|
|
.driver = {
|
|
.name = "altr_edac_device",
|
|
.of_match_table = altr_edac_device_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(altr_edac_device_driver);
|
|
|
|
/******************* Arria10 Device ECC Shared Functions *****************/
|
|
|
|
/*
|
|
* Test for memory's ECC dependencies upon entry because platform specific
|
|
* startup should have initialized the memory and enabled the ECC.
|
|
* Can't turn on ECC here because accessing un-initialized memory will
|
|
* cause CE/UE errors possibly causing an ABORT.
|
|
*/
|
|
static int __maybe_unused
|
|
altr_check_ecc_deps(struct altr_edac_device_dev *device)
|
|
{
|
|
void __iomem *base = device->base;
|
|
const struct edac_device_prv_data *prv = device->data;
|
|
|
|
if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
|
|
return 0;
|
|
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s: No ECC present or ECC disabled.\n",
|
|
device->edac_dev_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static irqreturn_t __maybe_unused altr_edac_a10_ecc_irq(int irq, void *dev_id)
|
|
{
|
|
struct altr_edac_device_dev *dci = dev_id;
|
|
void __iomem *base = dci->base;
|
|
|
|
if (irq == dci->sb_irq) {
|
|
writel(ALTR_A10_ECC_SERRPENA,
|
|
base + ALTR_A10_ECC_INTSTAT_OFST);
|
|
edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
|
|
|
|
return IRQ_HANDLED;
|
|
} else if (irq == dci->db_irq) {
|
|
writel(ALTR_A10_ECC_DERRPENA,
|
|
base + ALTR_A10_ECC_INTSTAT_OFST);
|
|
edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
|
|
if (dci->data->panic)
|
|
panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
WARN_ON(1);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/******************* Arria10 Memory Buffer Functions *********************/
|
|
|
|
static inline int a10_get_irq_mask(struct device_node *np)
|
|
{
|
|
int irq;
|
|
const u32 *handle = of_get_property(np, "interrupts", NULL);
|
|
|
|
if (!handle)
|
|
return -ENODEV;
|
|
irq = be32_to_cpup(handle);
|
|
return irq;
|
|
}
|
|
|
|
static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
|
|
{
|
|
u32 value = readl(ioaddr);
|
|
|
|
value |= bit_mask;
|
|
writel(value, ioaddr);
|
|
}
|
|
|
|
static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
|
|
{
|
|
u32 value = readl(ioaddr);
|
|
|
|
value &= ~bit_mask;
|
|
writel(value, ioaddr);
|
|
}
|
|
|
|
static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
|
|
{
|
|
u32 value = readl(ioaddr);
|
|
|
|
return (value & bit_mask) ? 1 : 0;
|
|
}
|
|
|
|
/*
|
|
* This function uses the memory initialization block in the Arria10 ECC
|
|
* controller to initialize/clear the entire memory data and ECC data.
|
|
*/
|
|
static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
|
|
{
|
|
int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
|
|
u32 init_mask, stat_mask, clear_mask;
|
|
int ret = 0;
|
|
|
|
if (port) {
|
|
init_mask = ALTR_A10_ECC_INITB;
|
|
stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
|
|
clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
|
|
} else {
|
|
init_mask = ALTR_A10_ECC_INITA;
|
|
stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
|
|
clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
|
|
}
|
|
|
|
ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
|
|
while (limit--) {
|
|
if (ecc_test_bits(stat_mask,
|
|
(ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
if (limit < 0)
|
|
ret = -EBUSY;
|
|
|
|
/* Clear any pending ECC interrupts */
|
|
writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int socfpga_is_a10(void)
|
|
{
|
|
return of_machine_is_compatible("altr,socfpga-arria10");
|
|
}
|
|
|
|
static int socfpga_is_s10(void)
|
|
{
|
|
return of_machine_is_compatible("altr,socfpga-stratix10");
|
|
}
|
|
|
|
static __init int __maybe_unused
|
|
altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
|
|
u32 ecc_ctrl_en_mask, bool dual_port)
|
|
{
|
|
int ret = 0;
|
|
void __iomem *ecc_block_base;
|
|
struct regmap *ecc_mgr_map;
|
|
char *ecc_name;
|
|
struct device_node *np_eccmgr;
|
|
|
|
ecc_name = (char *)np->name;
|
|
|
|
/* Get the ECC Manager - parent of the device EDACs */
|
|
np_eccmgr = of_get_parent(np);
|
|
|
|
if (socfpga_is_a10()) {
|
|
ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_eccmgr,
|
|
"altr,sysmgr-syscon");
|
|
} else {
|
|
struct device_node *sysmgr_np;
|
|
struct resource res;
|
|
uintptr_t base;
|
|
|
|
sysmgr_np = of_parse_phandle(np_eccmgr,
|
|
"altr,sysmgr-syscon", 0);
|
|
if (!sysmgr_np) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to find altr,sysmgr-syscon\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_address_to_resource(sysmgr_np, 0, &res))
|
|
return -ENOMEM;
|
|
|
|
/* Need physical address for SMCC call */
|
|
base = res.start;
|
|
|
|
ecc_mgr_map = regmap_init(NULL, NULL, (void *)base,
|
|
&s10_sdram_regmap_cfg);
|
|
}
|
|
of_node_put(np_eccmgr);
|
|
if (IS_ERR(ecc_mgr_map)) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to get syscon altr,sysmgr-syscon\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Map the ECC Block */
|
|
ecc_block_base = of_iomap(np, 0);
|
|
if (!ecc_block_base) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to map %s ECC block\n", ecc_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Disable ECC */
|
|
regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
|
|
writel(ALTR_A10_ECC_SERRINTEN,
|
|
(ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST));
|
|
ecc_clear_bits(ecc_ctrl_en_mask,
|
|
(ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
|
|
/* Ensure all writes complete */
|
|
wmb();
|
|
/* Use HW initialization block to initialize memory for ECC */
|
|
ret = altr_init_memory_port(ecc_block_base, 0);
|
|
if (ret) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"ECC: cannot init %s PORTA memory\n", ecc_name);
|
|
goto out;
|
|
}
|
|
|
|
if (dual_port) {
|
|
ret = altr_init_memory_port(ecc_block_base, 1);
|
|
if (ret) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"ECC: cannot init %s PORTB memory\n",
|
|
ecc_name);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Interrupt mode set to every SBERR */
|
|
regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
|
|
ALTR_A10_ECC_INTMODE);
|
|
/* Enable ECC */
|
|
ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
|
|
ALTR_A10_ECC_CTRL_OFST));
|
|
writel(ALTR_A10_ECC_SERRINTEN,
|
|
(ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST));
|
|
regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
|
|
/* Ensure all writes complete */
|
|
wmb();
|
|
out:
|
|
iounmap(ecc_block_base);
|
|
return ret;
|
|
}
|
|
|
|
static int validate_parent_available(struct device_node *np);
|
|
static const struct of_device_id altr_edac_a10_device_of_match[];
|
|
static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
|
|
{
|
|
int irq;
|
|
struct device_node *child, *np;
|
|
|
|
if (!socfpga_is_a10() && !socfpga_is_s10())
|
|
return -ENODEV;
|
|
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"altr,socfpga-a10-ecc-manager");
|
|
if (!np) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for_each_child_of_node(np, child) {
|
|
const struct of_device_id *pdev_id;
|
|
const struct edac_device_prv_data *prv;
|
|
|
|
if (!of_device_is_available(child))
|
|
continue;
|
|
if (!of_device_is_compatible(child, compat))
|
|
continue;
|
|
|
|
if (validate_parent_available(child))
|
|
continue;
|
|
|
|
irq = a10_get_irq_mask(child);
|
|
if (irq < 0)
|
|
continue;
|
|
|
|
/* Get matching node and check for valid result */
|
|
pdev_id = of_match_node(altr_edac_a10_device_of_match, child);
|
|
if (IS_ERR_OR_NULL(pdev_id))
|
|
continue;
|
|
|
|
/* Validate private data pointer before dereferencing */
|
|
prv = pdev_id->data;
|
|
if (!prv)
|
|
continue;
|
|
|
|
altr_init_a10_ecc_block(child, BIT(irq),
|
|
prv->ecc_enable_mask, 0);
|
|
}
|
|
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
/*********************** OCRAM EDAC Device Functions *********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_OCRAM
|
|
|
|
static void *ocram_alloc_mem(size_t size, void **other)
|
|
{
|
|
struct device_node *np;
|
|
struct gen_pool *gp;
|
|
void *sram_addr;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
|
|
if (!np)
|
|
return NULL;
|
|
|
|
gp = of_gen_pool_get(np, "iram", 0);
|
|
of_node_put(np);
|
|
if (!gp)
|
|
return NULL;
|
|
|
|
sram_addr = (void *)gen_pool_alloc(gp, size);
|
|
if (!sram_addr)
|
|
return NULL;
|
|
|
|
memset(sram_addr, 0, size);
|
|
/* Ensure data is written out */
|
|
wmb();
|
|
|
|
/* Remember this handle for freeing later */
|
|
*other = gp;
|
|
|
|
return sram_addr;
|
|
}
|
|
|
|
static void ocram_free_mem(void *p, size_t size, void *other)
|
|
{
|
|
gen_pool_free((struct gen_pool *)other, (unsigned long)p, size);
|
|
}
|
|
|
|
static const struct edac_device_prv_data ocramecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
|
|
.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
|
|
.alloc_mem = ocram_alloc_mem,
|
|
.free_mem = ocram_free_mem,
|
|
.ecc_enable_mask = ALTR_OCR_ECC_EN,
|
|
.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
|
|
.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
|
|
.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
|
|
.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
|
|
.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
|
|
.inject_fops = &altr_edac_device_inject_fops,
|
|
};
|
|
|
|
static const struct edac_device_prv_data a10_ocramecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
|
|
.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
/*
|
|
* OCRAM panic on uncorrectable error because sleep/resume
|
|
* functions and FPGA contents are stored in OCRAM. Prefer
|
|
* a kernel panic over executing/loading corrupted data.
|
|
*/
|
|
.panic = true,
|
|
};
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_OCRAM */
|
|
|
|
/********************* L2 Cache EDAC Device Functions ********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_L2C
|
|
|
|
static void *l2_alloc_mem(size_t size, void **other)
|
|
{
|
|
struct device *dev = *other;
|
|
void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
|
|
|
|
if (!ptemp)
|
|
return NULL;
|
|
|
|
/* Make sure everything is written out */
|
|
wmb();
|
|
|
|
/*
|
|
* Clean all cache levels up to LoC (includes L2)
|
|
* This ensures the corrupted data is written into
|
|
* L2 cache for readback test (which causes ECC error).
|
|
*/
|
|
flush_cache_all();
|
|
|
|
return ptemp;
|
|
}
|
|
|
|
static void l2_free_mem(void *p, size_t size, void *other)
|
|
{
|
|
struct device *dev = other;
|
|
|
|
if (dev && p)
|
|
devm_kfree(dev, p);
|
|
}
|
|
|
|
/*
|
|
* altr_l2_check_deps()
|
|
* Test for L2 cache ECC dependencies upon entry because
|
|
* platform specific startup should have initialized the L2
|
|
* memory and enabled the ECC.
|
|
* Bail if ECC is not enabled.
|
|
* Note that L2 Cache Enable is forced at build time.
|
|
*/
|
|
static int altr_l2_check_deps(struct altr_edac_device_dev *device)
|
|
{
|
|
void __iomem *base = device->base;
|
|
const struct edac_device_prv_data *prv = device->data;
|
|
|
|
if ((readl(base) & prv->ecc_enable_mask) ==
|
|
prv->ecc_enable_mask)
|
|
return 0;
|
|
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"L2: No ECC present, or ECC disabled\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
static irqreturn_t altr_edac_a10_l2_irq(int irq, void *dev_id)
|
|
{
|
|
struct altr_edac_device_dev *dci = dev_id;
|
|
|
|
if (irq == dci->sb_irq) {
|
|
regmap_write(dci->edac->ecc_mgr_map,
|
|
A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
|
|
A10_SYSGMR_MPU_CLEAR_L2_ECC_SB);
|
|
edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
|
|
|
|
return IRQ_HANDLED;
|
|
} else if (irq == dci->db_irq) {
|
|
regmap_write(dci->edac->ecc_mgr_map,
|
|
A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
|
|
A10_SYSGMR_MPU_CLEAR_L2_ECC_MB);
|
|
edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
|
|
panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
WARN_ON(1);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static const struct edac_device_prv_data l2ecc_data = {
|
|
.setup = altr_l2_check_deps,
|
|
.ce_clear_mask = 0,
|
|
.ue_clear_mask = 0,
|
|
.alloc_mem = l2_alloc_mem,
|
|
.free_mem = l2_free_mem,
|
|
.ecc_enable_mask = ALTR_L2_ECC_EN,
|
|
.ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS),
|
|
.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
|
|
.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
|
|
.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
|
|
.inject_fops = &altr_edac_device_inject_fops,
|
|
};
|
|
|
|
static const struct edac_device_prv_data a10_l2ecc_data = {
|
|
.setup = altr_l2_check_deps,
|
|
.ce_clear_mask = ALTR_A10_L2_ECC_SERR_CLR,
|
|
.ue_clear_mask = ALTR_A10_L2_ECC_MERR_CLR,
|
|
.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_L2,
|
|
.alloc_mem = l2_alloc_mem,
|
|
.free_mem = l2_free_mem,
|
|
.ecc_enable_mask = ALTR_A10_L2_ECC_EN_CTL,
|
|
.ce_set_mask = ALTR_A10_L2_ECC_CE_INJ_MASK,
|
|
.ue_set_mask = ALTR_A10_L2_ECC_UE_INJ_MASK,
|
|
.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_l2_irq,
|
|
.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
|
|
.inject_fops = &altr_edac_device_inject_fops,
|
|
};
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_L2C */
|
|
|
|
/********************* Ethernet Device Functions ********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_ETHERNET
|
|
|
|
static const struct edac_device_prv_data a10_enetecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject2_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_ethernet_ecc(void)
|
|
{
|
|
return altr_init_a10_ecc_device_type("altr,socfpga-eth-mac-ecc");
|
|
}
|
|
|
|
early_initcall(socfpga_init_ethernet_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_ETHERNET */
|
|
|
|
/********************** NAND Device Functions **********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_NAND
|
|
|
|
static const struct edac_device_prv_data a10_nandecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_nand_ecc(void)
|
|
{
|
|
return altr_init_a10_ecc_device_type("altr,socfpga-nand-ecc");
|
|
}
|
|
|
|
early_initcall(socfpga_init_nand_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_NAND */
|
|
|
|
/********************** DMA Device Functions **********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_DMA
|
|
|
|
static const struct edac_device_prv_data a10_dmaecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_dma_ecc(void)
|
|
{
|
|
return altr_init_a10_ecc_device_type("altr,socfpga-dma-ecc");
|
|
}
|
|
|
|
early_initcall(socfpga_init_dma_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_DMA */
|
|
|
|
/********************** USB Device Functions **********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_USB
|
|
|
|
static const struct edac_device_prv_data a10_usbecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject2_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_usb_ecc(void)
|
|
{
|
|
return altr_init_a10_ecc_device_type("altr,socfpga-usb-ecc");
|
|
}
|
|
|
|
early_initcall(socfpga_init_usb_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_USB */
|
|
|
|
/********************** QSPI Device Functions **********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_QSPI
|
|
|
|
static const struct edac_device_prv_data a10_qspiecc_data = {
|
|
.setup = altr_check_ecc_deps,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRA,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_qspi_ecc(void)
|
|
{
|
|
return altr_init_a10_ecc_device_type("altr,socfpga-qspi-ecc");
|
|
}
|
|
|
|
early_initcall(socfpga_init_qspi_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_QSPI */
|
|
|
|
/********************* SDMMC Device Functions **********************/
|
|
|
|
#ifdef CONFIG_EDAC_ALTERA_SDMMC
|
|
|
|
static const struct edac_device_prv_data a10_sdmmceccb_data;
|
|
static int altr_portb_setup(struct altr_edac_device_dev *device)
|
|
{
|
|
struct edac_device_ctl_info *dci;
|
|
struct altr_edac_device_dev *altdev;
|
|
char *ecc_name = "sdmmcb-ecc";
|
|
int edac_idx, rc;
|
|
struct device_node *np;
|
|
const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
|
|
|
|
rc = altr_check_ecc_deps(device);
|
|
if (rc)
|
|
return rc;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
|
|
if (!np) {
|
|
edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Create the PortB EDAC device */
|
|
edac_idx = edac_device_alloc_index();
|
|
dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
|
|
ecc_name, 1, 0, NULL, 0, edac_idx);
|
|
if (!dci) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s: Unable to allocate PortB EDAC device\n",
|
|
ecc_name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialize the PortB EDAC device structure from PortA structure */
|
|
altdev = dci->pvt_info;
|
|
*altdev = *device;
|
|
|
|
if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
/* Update PortB specific values */
|
|
altdev->edac_dev_name = ecc_name;
|
|
altdev->edac_idx = edac_idx;
|
|
altdev->edac_dev = dci;
|
|
altdev->data = prv;
|
|
dci->dev = &altdev->ddev;
|
|
dci->ctl_name = "Altera ECC Manager";
|
|
dci->mod_name = ecc_name;
|
|
dci->dev_name = ecc_name;
|
|
|
|
/* Update the IRQs for PortB */
|
|
altdev->sb_irq = irq_of_parse_and_map(np, 2);
|
|
if (!altdev->sb_irq) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
|
|
rc = -ENODEV;
|
|
goto err_release_group_1;
|
|
}
|
|
rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
|
|
prv->ecc_irq_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
|
ecc_name, altdev);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
|
|
goto err_release_group_1;
|
|
}
|
|
|
|
altdev->db_irq = irq_of_parse_and_map(np, 3);
|
|
if (!altdev->db_irq) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
|
|
rc = -ENODEV;
|
|
goto err_release_group_1;
|
|
}
|
|
rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
|
|
prv->ecc_irq_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
|
ecc_name, altdev);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
|
|
goto err_release_group_1;
|
|
}
|
|
|
|
rc = edac_device_add_device(dci);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"edac_device_add_device portB failed\n");
|
|
rc = -ENOMEM;
|
|
goto err_release_group_1;
|
|
}
|
|
altr_create_edacdev_dbgfs(dci, prv);
|
|
|
|
list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
|
|
|
|
devres_remove_group(&altdev->ddev, altr_portb_setup);
|
|
|
|
return 0;
|
|
|
|
err_release_group_1:
|
|
edac_device_free_ctl_info(dci);
|
|
devres_release_group(&altdev->ddev, altr_portb_setup);
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s:Error setting up EDAC device: %d\n", ecc_name, rc);
|
|
return rc;
|
|
}
|
|
|
|
static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
|
|
{
|
|
struct altr_edac_device_dev *ad = dev_id;
|
|
void __iomem *base = ad->base;
|
|
const struct edac_device_prv_data *priv = ad->data;
|
|
|
|
if (irq == ad->sb_irq) {
|
|
writel(priv->ce_clear_mask,
|
|
base + ALTR_A10_ECC_INTSTAT_OFST);
|
|
edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
|
|
return IRQ_HANDLED;
|
|
} else if (irq == ad->db_irq) {
|
|
writel(priv->ue_clear_mask,
|
|
base + ALTR_A10_ECC_INTSTAT_OFST);
|
|
edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
WARN_ONCE(1, "Unhandled IRQ%d on Port B.", irq);
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static const struct edac_device_prv_data a10_sdmmcecca_data = {
|
|
.setup = altr_portb_setup,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_SERRPENA,
|
|
.ue_set_mask = ALTR_A10_ECC_DERRPENA,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
};
|
|
|
|
static const struct edac_device_prv_data a10_sdmmceccb_data = {
|
|
.setup = altr_portb_setup,
|
|
.ce_clear_mask = ALTR_A10_ECC_SERRPENB,
|
|
.ue_clear_mask = ALTR_A10_ECC_DERRPENB,
|
|
.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
|
|
.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
|
|
.ce_set_mask = ALTR_A10_ECC_TSERRB,
|
|
.ue_set_mask = ALTR_A10_ECC_TDERRB,
|
|
.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
|
|
.ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
|
|
.inject_fops = &altr_edac_a10_device_inject_fops,
|
|
};
|
|
|
|
static int __init socfpga_init_sdmmc_ecc(void)
|
|
{
|
|
int rc = -ENODEV;
|
|
struct device_node *child;
|
|
|
|
if (!socfpga_is_a10() && !socfpga_is_s10())
|
|
return -ENODEV;
|
|
|
|
child = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
|
|
if (!child) {
|
|
edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!of_device_is_available(child))
|
|
goto exit;
|
|
|
|
if (validate_parent_available(child))
|
|
goto exit;
|
|
|
|
rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
|
|
a10_sdmmcecca_data.ecc_enable_mask, 1);
|
|
exit:
|
|
of_node_put(child);
|
|
return rc;
|
|
}
|
|
|
|
early_initcall(socfpga_init_sdmmc_ecc);
|
|
|
|
#endif /* CONFIG_EDAC_ALTERA_SDMMC */
|
|
|
|
/********************* Arria10 EDAC Device Functions *************************/
|
|
static const struct of_device_id altr_edac_a10_device_of_match[] = {
|
|
#ifdef CONFIG_EDAC_ALTERA_L2C
|
|
{ .compatible = "altr,socfpga-a10-l2-ecc", .data = &a10_l2ecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_OCRAM
|
|
{ .compatible = "altr,socfpga-a10-ocram-ecc",
|
|
.data = &a10_ocramecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_ETHERNET
|
|
{ .compatible = "altr,socfpga-eth-mac-ecc",
|
|
.data = &a10_enetecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_NAND
|
|
{ .compatible = "altr,socfpga-nand-ecc", .data = &a10_nandecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_DMA
|
|
{ .compatible = "altr,socfpga-dma-ecc", .data = &a10_dmaecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_USB
|
|
{ .compatible = "altr,socfpga-usb-ecc", .data = &a10_usbecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_QSPI
|
|
{ .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data },
|
|
#endif
|
|
#ifdef CONFIG_EDAC_ALTERA_SDMMC
|
|
{ .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
|
|
#endif
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);
|
|
|
|
/*
|
|
* The Arria10 EDAC Device Functions differ from the Cyclone5/Arria5
|
|
* because 2 IRQs are shared among the all ECC peripherals. The ECC
|
|
* manager manages the IRQs and the children.
|
|
* Based on xgene_edac.c peripheral code.
|
|
*/
|
|
|
|
static ssize_t altr_edac_a10_device_trig(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct edac_device_ctl_info *edac_dci = file->private_data;
|
|
struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
|
|
const struct edac_device_prv_data *priv = drvdata->data;
|
|
void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
|
|
unsigned long flags;
|
|
u8 trig_type;
|
|
|
|
if (!user_buf || get_user(trig_type, user_buf))
|
|
return -EFAULT;
|
|
|
|
local_irq_save(flags);
|
|
if (trig_type == ALTR_UE_TRIGGER_CHAR)
|
|
writel(priv->ue_set_mask, set_addr);
|
|
else
|
|
writel(priv->ce_set_mask, set_addr);
|
|
|
|
/* Ensure the interrupt test bits are set */
|
|
wmb();
|
|
local_irq_restore(flags);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* The Stratix10 EDAC Error Injection Functions differ from Arria10
|
|
* slightly. A few Arria10 peripherals can use this injection function.
|
|
* Inject the error into the memory and then readback to trigger the IRQ.
|
|
*/
|
|
static ssize_t altr_edac_a10_device_trig2(struct file *file,
|
|
const char __user *user_buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct edac_device_ctl_info *edac_dci = file->private_data;
|
|
struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
|
|
const struct edac_device_prv_data *priv = drvdata->data;
|
|
void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
|
|
unsigned long flags;
|
|
u8 trig_type;
|
|
|
|
if (!user_buf || get_user(trig_type, user_buf))
|
|
return -EFAULT;
|
|
|
|
local_irq_save(flags);
|
|
if (trig_type == ALTR_UE_TRIGGER_CHAR) {
|
|
writel(priv->ue_set_mask, set_addr);
|
|
} else {
|
|
/* Setup write of 0 to first 4 bytes */
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA0_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA1_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA2_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA3_OFST);
|
|
/* Setup write of 4 bytes */
|
|
writel(ECC_WORD_WRITE, drvdata->base + ECC_BLK_DBYTECTRL_OFST);
|
|
/* Setup Address to 0 */
|
|
writel(0x0, drvdata->base + ECC_BLK_ADDRESS_OFST);
|
|
/* Setup accctrl to write & data override */
|
|
writel(ECC_WRITE_DOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
|
|
/* Kick it. */
|
|
writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
|
|
/* Setup accctrl to read & ecc override */
|
|
writel(ECC_READ_EOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
|
|
/* Kick it. */
|
|
writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
|
|
/* Setup write for single bit change */
|
|
writel(0x1, drvdata->base + ECC_BLK_WDATA0_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA1_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA2_OFST);
|
|
writel(0x0, drvdata->base + ECC_BLK_WDATA3_OFST);
|
|
/* Copy Read ECC to Write ECC */
|
|
writel(readl(drvdata->base + ECC_BLK_RECC0_OFST),
|
|
drvdata->base + ECC_BLK_WECC0_OFST);
|
|
writel(readl(drvdata->base + ECC_BLK_RECC1_OFST),
|
|
drvdata->base + ECC_BLK_WECC1_OFST);
|
|
/* Setup accctrl to write & ecc override & data override */
|
|
writel(ECC_WRITE_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
|
|
/* Kick it. */
|
|
writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
|
|
/* Setup accctrl to read & ecc overwrite & data overwrite */
|
|
writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
|
|
/* Kick it. */
|
|
writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
|
|
}
|
|
|
|
/* Ensure the interrupt test bits are set */
|
|
wmb();
|
|
local_irq_restore(flags);
|
|
|
|
return count;
|
|
}
|
|
|
|
static void altr_edac_a10_irq_handler(struct irq_desc *desc)
|
|
{
|
|
int dberr, bit, sm_offset, irq_status;
|
|
struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
int irq = irq_desc_get_irq(desc);
|
|
|
|
dberr = (irq == edac->db_irq) ? 1 : 0;
|
|
sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
|
|
A10_SYSMGR_ECC_INTSTAT_SERR_OFST;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
|
|
|
|
for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
|
|
irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
|
|
if (irq)
|
|
generic_handle_irq(irq);
|
|
}
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int validate_parent_available(struct device_node *np)
|
|
{
|
|
struct device_node *parent;
|
|
int ret = 0;
|
|
|
|
/* Ensure parent device is enabled if parent node exists */
|
|
parent = of_parse_phandle(np, "altr,ecc-parent", 0);
|
|
if (parent && !of_device_is_available(parent))
|
|
ret = -ENODEV;
|
|
|
|
of_node_put(parent);
|
|
return ret;
|
|
}
|
|
|
|
static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
|
|
struct device_node *np)
|
|
{
|
|
struct edac_device_ctl_info *dci;
|
|
struct altr_edac_device_dev *altdev;
|
|
char *ecc_name = (char *)np->name;
|
|
struct resource res;
|
|
int edac_idx;
|
|
int rc = 0;
|
|
const struct edac_device_prv_data *prv;
|
|
/* Get matching node and check for valid result */
|
|
const struct of_device_id *pdev_id =
|
|
of_match_node(altr_edac_a10_device_of_match, np);
|
|
if (IS_ERR_OR_NULL(pdev_id))
|
|
return -ENODEV;
|
|
|
|
/* Get driver specific data for this EDAC device */
|
|
prv = pdev_id->data;
|
|
if (IS_ERR_OR_NULL(prv))
|
|
return -ENODEV;
|
|
|
|
if (validate_parent_available(np))
|
|
return -ENODEV;
|
|
|
|
if (!devres_open_group(edac->dev, altr_edac_a10_device_add, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
rc = of_address_to_resource(np, 0, &res);
|
|
if (rc < 0) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s: no resource address\n", ecc_name);
|
|
goto err_release_group;
|
|
}
|
|
|
|
edac_idx = edac_device_alloc_index();
|
|
dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name,
|
|
1, ecc_name, 1, 0, NULL, 0,
|
|
edac_idx);
|
|
|
|
if (!dci) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s: Unable to allocate EDAC device\n", ecc_name);
|
|
rc = -ENOMEM;
|
|
goto err_release_group;
|
|
}
|
|
|
|
altdev = dci->pvt_info;
|
|
dci->dev = edac->dev;
|
|
altdev->edac_dev_name = ecc_name;
|
|
altdev->edac_idx = edac_idx;
|
|
altdev->edac = edac;
|
|
altdev->edac_dev = dci;
|
|
altdev->data = prv;
|
|
altdev->ddev = *edac->dev;
|
|
dci->dev = &altdev->ddev;
|
|
dci->ctl_name = "Altera ECC Manager";
|
|
dci->mod_name = ecc_name;
|
|
dci->dev_name = ecc_name;
|
|
|
|
altdev->base = devm_ioremap_resource(edac->dev, &res);
|
|
if (IS_ERR(altdev->base)) {
|
|
rc = PTR_ERR(altdev->base);
|
|
goto err_release_group1;
|
|
}
|
|
|
|
/* Check specific dependencies for the module */
|
|
if (altdev->data->setup) {
|
|
rc = altdev->data->setup(altdev);
|
|
if (rc)
|
|
goto err_release_group1;
|
|
}
|
|
|
|
altdev->sb_irq = irq_of_parse_and_map(np, 0);
|
|
if (!altdev->sb_irq) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating SBIRQ\n");
|
|
rc = -ENODEV;
|
|
goto err_release_group1;
|
|
}
|
|
rc = devm_request_irq(edac->dev, altdev->sb_irq, prv->ecc_irq_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
|
ecc_name, altdev);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "No SBERR IRQ resource\n");
|
|
goto err_release_group1;
|
|
}
|
|
|
|
altdev->db_irq = irq_of_parse_and_map(np, 1);
|
|
if (!altdev->db_irq) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
|
|
rc = -ENODEV;
|
|
goto err_release_group1;
|
|
}
|
|
rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
|
ecc_name, altdev);
|
|
if (rc) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
|
|
goto err_release_group1;
|
|
}
|
|
|
|
rc = edac_device_add_device(dci);
|
|
if (rc) {
|
|
dev_err(edac->dev, "edac_device_add_device failed\n");
|
|
rc = -ENOMEM;
|
|
goto err_release_group1;
|
|
}
|
|
|
|
altr_create_edacdev_dbgfs(dci, prv);
|
|
|
|
list_add(&altdev->next, &edac->a10_ecc_devices);
|
|
|
|
devres_remove_group(edac->dev, altr_edac_a10_device_add);
|
|
|
|
return 0;
|
|
|
|
err_release_group1:
|
|
edac_device_free_ctl_info(dci);
|
|
err_release_group:
|
|
devres_release_group(edac->dev, NULL);
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"%s:Error setting up EDAC device: %d\n", ecc_name, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void a10_eccmgr_irq_mask(struct irq_data *d)
|
|
{
|
|
struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
|
|
|
|
regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
|
|
BIT(d->hwirq));
|
|
}
|
|
|
|
static void a10_eccmgr_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
|
|
|
|
regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST,
|
|
BIT(d->hwirq));
|
|
}
|
|
|
|
static int a10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct altr_arria10_edac *edac = d->host_data;
|
|
|
|
irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq);
|
|
irq_set_chip_data(irq, edac);
|
|
irq_set_noprobe(irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops a10_eccmgr_ic_ops = {
|
|
.map = a10_eccmgr_irqdomain_map,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
/************** Stratix 10 EDAC Double Bit Error Handler ************/
|
|
#define to_a10edac(p, m) container_of(p, struct altr_arria10_edac, m)
|
|
|
|
/*
|
|
* The double bit error is handled through SError which is fatal. This is
|
|
* called as a panic notifier to printout ECC error info as part of the panic.
|
|
*/
|
|
static int s10_edac_dberr_handler(struct notifier_block *this,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct altr_arria10_edac *edac = to_a10edac(this, panic_notifier);
|
|
int err_addr, dberror;
|
|
|
|
regmap_read(edac->ecc_mgr_map, S10_SYSMGR_ECC_INTSTAT_DERR_OFST,
|
|
&dberror);
|
|
regmap_write(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST, dberror);
|
|
if (dberror & S10_DDR0_IRQ_MASK) {
|
|
regmap_read(edac->ecc_mgr_map, A10_DERRADDR_OFST, &err_addr);
|
|
regmap_write(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
|
|
err_addr);
|
|
edac_printk(KERN_ERR, EDAC_MC,
|
|
"EDAC: [Uncorrectable errors @ 0x%08X]\n\n",
|
|
err_addr);
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/****************** Arria 10 EDAC Probe Function *********************/
|
|
static int altr_edac_a10_probe(struct platform_device *pdev)
|
|
{
|
|
struct altr_arria10_edac *edac;
|
|
struct device_node *child;
|
|
|
|
edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
|
|
if (!edac)
|
|
return -ENOMEM;
|
|
|
|
edac->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, edac);
|
|
INIT_LIST_HEAD(&edac->a10_ecc_devices);
|
|
|
|
if (socfpga_is_a10()) {
|
|
edac->ecc_mgr_map =
|
|
syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
|
"altr,sysmgr-syscon");
|
|
} else {
|
|
struct device_node *sysmgr_np;
|
|
struct resource res;
|
|
uintptr_t base;
|
|
|
|
sysmgr_np = of_parse_phandle(pdev->dev.of_node,
|
|
"altr,sysmgr-syscon", 0);
|
|
if (!sysmgr_np) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to find altr,sysmgr-syscon\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_address_to_resource(sysmgr_np, 0, &res))
|
|
return -ENOMEM;
|
|
|
|
/* Need physical address for SMCC call */
|
|
base = res.start;
|
|
|
|
edac->ecc_mgr_map = devm_regmap_init(&pdev->dev, NULL,
|
|
(void *)base,
|
|
&s10_sdram_regmap_cfg);
|
|
}
|
|
|
|
if (IS_ERR(edac->ecc_mgr_map)) {
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Unable to get syscon altr,sysmgr-syscon\n");
|
|
return PTR_ERR(edac->ecc_mgr_map);
|
|
}
|
|
|
|
edac->irq_chip.name = pdev->dev.of_node->name;
|
|
edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
|
|
edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;
|
|
edac->domain = irq_domain_add_linear(pdev->dev.of_node, 64,
|
|
&a10_eccmgr_ic_ops, edac);
|
|
if (!edac->domain) {
|
|
dev_err(&pdev->dev, "Error adding IRQ domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
edac->sb_irq = platform_get_irq(pdev, 0);
|
|
if (edac->sb_irq < 0) {
|
|
dev_err(&pdev->dev, "No SBERR IRQ resource\n");
|
|
return edac->sb_irq;
|
|
}
|
|
|
|
irq_set_chained_handler_and_data(edac->sb_irq,
|
|
altr_edac_a10_irq_handler,
|
|
edac);
|
|
|
|
if (socfpga_is_a10()) {
|
|
edac->db_irq = platform_get_irq(pdev, 1);
|
|
if (edac->db_irq < 0) {
|
|
dev_err(&pdev->dev, "No DBERR IRQ resource\n");
|
|
return edac->db_irq;
|
|
}
|
|
irq_set_chained_handler_and_data(edac->db_irq,
|
|
altr_edac_a10_irq_handler,
|
|
edac);
|
|
} else {
|
|
int dberror, err_addr;
|
|
|
|
edac->panic_notifier.notifier_call = s10_edac_dberr_handler;
|
|
atomic_notifier_chain_register(&panic_notifier_list,
|
|
&edac->panic_notifier);
|
|
|
|
/* Printout a message if uncorrectable error previously. */
|
|
regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST,
|
|
&dberror);
|
|
if (dberror) {
|
|
regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
|
|
&err_addr);
|
|
edac_printk(KERN_ERR, EDAC_DEVICE,
|
|
"Previous Boot UE detected[0x%X] @ 0x%X\n",
|
|
dberror, err_addr);
|
|
/* Reset the sticky registers */
|
|
regmap_write(edac->ecc_mgr_map,
|
|
S10_SYSMGR_UE_VAL_OFST, 0);
|
|
regmap_write(edac->ecc_mgr_map,
|
|
S10_SYSMGR_UE_ADDR_OFST, 0);
|
|
}
|
|
}
|
|
|
|
for_each_child_of_node(pdev->dev.of_node, child) {
|
|
if (!of_device_is_available(child))
|
|
continue;
|
|
|
|
if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-a10-ocram-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-eth-mac-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-nand-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-dma-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-usb-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-qspi-ecc") ||
|
|
of_device_is_compatible(child, "altr,socfpga-sdmmc-ecc"))
|
|
|
|
altr_edac_a10_device_add(edac, child);
|
|
|
|
else if ((of_device_is_compatible(child, "altr,sdram-edac-a10")) ||
|
|
(of_device_is_compatible(child, "altr,sdram-edac-s10")))
|
|
of_platform_populate(pdev->dev.of_node,
|
|
altr_sdram_ctrl_of_match,
|
|
NULL, &pdev->dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id altr_edac_a10_of_match[] = {
|
|
{ .compatible = "altr,socfpga-a10-ecc-manager" },
|
|
{ .compatible = "altr,socfpga-s10-ecc-manager" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);
|
|
|
|
static struct platform_driver altr_edac_a10_driver = {
|
|
.probe = altr_edac_a10_probe,
|
|
.driver = {
|
|
.name = "socfpga_a10_ecc_manager",
|
|
.of_match_table = altr_edac_a10_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(altr_edac_a10_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Thor Thayer");
|
|
MODULE_DESCRIPTION("EDAC Driver for Altera Memories");
|