mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
31f0820a67
We've had deeper idle states working on omaps for few years now, but only in the legacy mode. When booted with device tree, the wake-up events did not have a chance to work until commit3e6cee1786(pinctrl: single: Add support for wake-up interrupts) that recently got merged. In addition to that we also needed commit79d9701559(of/irq: create interrupts-extended property) and9ec36cafe4(of/irq: do irq resolution in platform_get_irq) that are now also merged. So let's fix the wake-up events for some selected omaps so devices booted in device tree mode won't just hang if deeper power states are enabled, and so systems can wake up from suspend to the serial port event. Note that there's no longer need to specify the wake-up bit in the pinctrl settings, the request_irq on the wake-up pin takes care of that. Cc: devicetree@vger.kernel.org Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> [tony@atomide.com: updated comments, added board LDP] Signed-off-by: Tony Lindgren <tony@atomide.com>
691 lines
15 KiB
Plaintext
691 lines
15 KiB
Plaintext
/*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "omap443x.dtsi"
|
|
#include "elpida_ecb240abacn.dtsi"
|
|
|
|
/ {
|
|
model = "TI OMAP4 SDP board";
|
|
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000>; /* 1 GB */
|
|
};
|
|
|
|
aliases {
|
|
display0 = &lcd0;
|
|
display1 = &lcd1;
|
|
display2 = &hdmi0;
|
|
};
|
|
|
|
vdd_eth: fixedregulator-vdd-eth {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDD_ETH";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 16 0>; /* gpio line 48 */
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vbat: fixedregulator-vbat {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VBAT";
|
|
regulator-min-microvolt = <3750000>;
|
|
regulator-max-microvolt = <3750000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
debug0 {
|
|
label = "omap4:green:debug0";
|
|
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
|
|
};
|
|
|
|
debug1 {
|
|
label = "omap4:green:debug1";
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
|
|
};
|
|
|
|
debug2 {
|
|
label = "omap4:green:debug2";
|
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
|
|
};
|
|
|
|
debug3 {
|
|
label = "omap4:green:debug3";
|
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
|
|
};
|
|
|
|
debug4 {
|
|
label = "omap4:green:debug4";
|
|
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
|
|
};
|
|
|
|
user1 {
|
|
label = "omap4:blue:user";
|
|
gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
|
|
};
|
|
|
|
user2 {
|
|
label = "omap4:red:user";
|
|
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
|
|
};
|
|
|
|
user3 {
|
|
label = "omap4:green:user";
|
|
gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
|
|
};
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
kpad {
|
|
label = "omap4::keypad";
|
|
pwms = <&twl_pwm 0 7812500>;
|
|
max-brightness = <127>;
|
|
};
|
|
|
|
charging {
|
|
label = "omap4:green:chrg";
|
|
pwms = <&twl_pwmled 0 7812500>;
|
|
max-brightness = <255>;
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&twl_pwm 1 7812500>;
|
|
brightness-levels = <
|
|
0 10 20 30 40
|
|
50 60 70 80 90
|
|
100 110 120 127
|
|
>;
|
|
default-brightness-level = <13>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "ti,abe-twl6040";
|
|
ti,model = "SDP4430";
|
|
|
|
ti,jack-detection = <1>;
|
|
ti,mclk-freq = <38400000>;
|
|
|
|
ti,mcpdm = <&mcpdm>;
|
|
ti,dmic = <&dmic>;
|
|
|
|
ti,twl6040 = <&twl6040>;
|
|
|
|
/* Audio routing */
|
|
ti,audio-routing =
|
|
"Headset Stereophone", "HSOL",
|
|
"Headset Stereophone", "HSOR",
|
|
"Earphone Spk", "EP",
|
|
"Ext Spk", "HFL",
|
|
"Ext Spk", "HFR",
|
|
"Line Out", "AUXL",
|
|
"Line Out", "AUXR",
|
|
"Vibrator", "VIBRAL",
|
|
"Vibrator", "VIBRAR",
|
|
"HSMIC", "Headset Mic",
|
|
"Headset Mic", "Headset Mic Bias",
|
|
"MAINMIC", "Main Handset Mic",
|
|
"Main Handset Mic", "Main Mic Bias",
|
|
"SUBMIC", "Sub Handset Mic",
|
|
"Sub Handset Mic", "Main Mic Bias",
|
|
"AFML", "Line In",
|
|
"AFMR", "Line In",
|
|
"DMic", "Digital Mic",
|
|
"Digital Mic", "Digital Mic1 Bias";
|
|
};
|
|
|
|
/* regulator for wl12xx on sdio5 */
|
|
wl12xx_vmmc: wl12xx_vmmc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wl12xx_gpio>;
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vwl1271";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&gpio2 22 0>;
|
|
startup-delay-us = <70000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
tpd12s015: encoder@0 {
|
|
compatible = "ti,tpd12s015";
|
|
|
|
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
|
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
|
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
tpd12s015_in: endpoint@0 {
|
|
remote-endpoint = <&hdmi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
tpd12s015_out: endpoint@0 {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi0: connector@0 {
|
|
compatible = "hdmi-connector";
|
|
label = "hdmi";
|
|
|
|
type = "c";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&omap4_pmx_core {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
&dss_hdmi_pins
|
|
&tpd12s015_pins
|
|
>;
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
|
|
0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
|
|
0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
|
|
0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
|
>;
|
|
};
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
pinctrl-single,pins = <
|
|
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
|
|
0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
|
|
0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
|
0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
|
>;
|
|
};
|
|
|
|
uart4_pins: pinmux_uart4_pins {
|
|
pinctrl-single,pins = <
|
|
0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
|
|
0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
|
|
>;
|
|
};
|
|
|
|
twl6040_pins: pinmux_twl6040_pins {
|
|
pinctrl-single,pins = <
|
|
0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
|
|
0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
|
|
>;
|
|
};
|
|
|
|
mcpdm_pins: pinmux_mcpdm_pins {
|
|
pinctrl-single,pins = <
|
|
0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
|
|
0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
|
|
0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
|
|
0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
|
|
0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
|
|
>;
|
|
};
|
|
|
|
dmic_pins: pinmux_dmic_pins {
|
|
pinctrl-single,pins = <
|
|
0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
|
|
0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
|
|
0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
|
|
0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
|
|
>;
|
|
};
|
|
|
|
mcbsp1_pins: pinmux_mcbsp1_pins {
|
|
pinctrl-single,pins = <
|
|
0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
|
|
0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
|
|
0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
|
|
0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
|
|
>;
|
|
};
|
|
|
|
mcbsp2_pins: pinmux_mcbsp2_pins {
|
|
pinctrl-single,pins = <
|
|
0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
|
|
0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
|
|
0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
|
|
0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
|
|
>;
|
|
};
|
|
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
|
pinctrl-single,pins = <
|
|
0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
|
0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
|
0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
|
0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
|
>;
|
|
};
|
|
|
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
|
pinctrl-single,pins = <
|
|
0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
|
0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
|
|
0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
|
|
>;
|
|
};
|
|
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
|
pinctrl-single,pins = <
|
|
0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
|
|
0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
|
|
0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
|
0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
|
>;
|
|
};
|
|
|
|
i2c2_pins: pinmux_i2c2_pins {
|
|
pinctrl-single,pins = <
|
|
0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
|
0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
|
>;
|
|
};
|
|
|
|
i2c3_pins: pinmux_i2c3_pins {
|
|
pinctrl-single,pins = <
|
|
0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
|
0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
|
>;
|
|
};
|
|
|
|
i2c4_pins: pinmux_i2c4_pins {
|
|
pinctrl-single,pins = <
|
|
0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
|
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
|
>;
|
|
};
|
|
|
|
/* wl12xx GPIO output for WLAN_EN */
|
|
wl12xx_gpio: pinmux_wl12xx_gpio {
|
|
pinctrl-single,pins = <
|
|
0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
|
|
>;
|
|
};
|
|
|
|
/* wl12xx GPIO inputs and SDIO pins */
|
|
wl12xx_pins: pinmux_wl12xx_pins {
|
|
pinctrl-single,pins = <
|
|
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
|
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
|
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
|
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
|
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
|
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
|
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
twl6040: twl@4b {
|
|
compatible = "ti,twl6040";
|
|
reg = <0x4b>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&twl6040_pins>;
|
|
|
|
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
|
|
interrupt-parent = <&gic>;
|
|
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
|
|
|
|
vio-supply = <&v1v8>;
|
|
v2v1-supply = <&v2v1>;
|
|
enable-active-high;
|
|
|
|
/* regulators for vibra motor */
|
|
vddvibl-supply = <&vbat>;
|
|
vddvibr-supply = <&vbat>;
|
|
|
|
vibra {
|
|
/* Vibra driver, motor resistance parameters */
|
|
ti,vibldrv-res = <8>;
|
|
ti,vibrdrv-res = <3>;
|
|
ti,viblmotor-res = <10>;
|
|
ti,vibrmotor-res = <10>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "twl6030.dtsi"
|
|
#include "twl6030_omap4.dtsi"
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/*
|
|
* Temperature Sensor
|
|
* http://www.ti.com/lit/ds/symlink/tmp105.pdf
|
|
*/
|
|
tmp105@48 {
|
|
compatible = "ti,tmp105";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
/*
|
|
* Ambient Light Sensor
|
|
* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
|
|
*/
|
|
bh1780@29 {
|
|
compatible = "rohm,bh1780";
|
|
reg = <0x29>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins>;
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/*
|
|
* 3-Axis Digital Compass
|
|
* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
|
|
*/
|
|
hmc5843@1e {
|
|
compatible = "honeywell,hmc5843";
|
|
reg = <0x1e>;
|
|
};
|
|
};
|
|
|
|
&mcspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi1_pins>;
|
|
|
|
eth@0 {
|
|
compatible = "ks8851";
|
|
spi-max-frequency = <24000000>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
|
|
vdd-supply = <&vdd_eth>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vmmc>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <&vaux1>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc4 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wl12xx_pins>;
|
|
vmmc-supply = <&wl12xx_vmmc>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
};
|
|
|
|
&emif1 {
|
|
cs1-used;
|
|
device-handle = <&elpida_ECB240ABACN>;
|
|
};
|
|
|
|
&emif2 {
|
|
cs1-used;
|
|
device-handle = <&elpida_ECB240ABACN>;
|
|
};
|
|
|
|
&keypad {
|
|
keypad,num-rows = <8>;
|
|
keypad,num-columns = <8>;
|
|
linux,keymap = <0x00000012 /* KEY_E */
|
|
0x00010013 /* KEY_R */
|
|
0x00020014 /* KEY_T */
|
|
0x00030066 /* KEY_HOME */
|
|
0x0004003f /* KEY_F5 */
|
|
0x000500f0 /* KEY_UNKNOWN */
|
|
0x00060017 /* KEY_I */
|
|
0x0007002a /* KEY_LEFTSHIFT */
|
|
0x01000020 /* KEY_D*/
|
|
0x01010021 /* KEY_F */
|
|
0x01020022 /* KEY_G */
|
|
0x010300e7 /* KEY_SEND */
|
|
0x01040040 /* KEY_F6 */
|
|
0x010500f0 /* KEY_UNKNOWN */
|
|
0x01060025 /* KEY_K */
|
|
0x0107001c /* KEY_ENTER */
|
|
0x0200002d /* KEY_X */
|
|
0x0201002e /* KEY_C */
|
|
0x0202002f /* KEY_V */
|
|
0x0203006b /* KEY_END */
|
|
0x02040041 /* KEY_F7 */
|
|
0x020500f0 /* KEY_UNKNOWN */
|
|
0x02060034 /* KEY_DOT */
|
|
0x0207003a /* KEY_CAPSLOCK */
|
|
0x0300002c /* KEY_Z */
|
|
0x0301004e /* KEY_KPLUS */
|
|
0x03020030 /* KEY_B */
|
|
0x0303003b /* KEY_F1 */
|
|
0x03040042 /* KEY_F8 */
|
|
0x030500f0 /* KEY_UNKNOWN */
|
|
0x03060018 /* KEY_O */
|
|
0x03070039 /* KEY_SPACE */
|
|
0x04000011 /* KEY_W */
|
|
0x04010015 /* KEY_Y */
|
|
0x04020016 /* KEY_U */
|
|
0x0403003c /* KEY_F2 */
|
|
0x04040073 /* KEY_VOLUMEUP */
|
|
0x040500f0 /* KEY_UNKNOWN */
|
|
0x04060026 /* KEY_L */
|
|
0x04070069 /* KEY_LEFT */
|
|
0x0500001f /* KEY_S */
|
|
0x05010023 /* KEY_H */
|
|
0x05020024 /* KEY_J */
|
|
0x0503003d /* KEY_F3 */
|
|
0x05040043 /* KEY_F9 */
|
|
0x05050072 /* KEY_VOLUMEDOWN */
|
|
0x05060032 /* KEY_M */
|
|
0x0507006a /* KEY_RIGHT */
|
|
0x06000010 /* KEY_Q */
|
|
0x0601001e /* KEY_A */
|
|
0x06020031 /* KEY_N */
|
|
0x0603009e /* KEY_BACK */
|
|
0x0604000e /* KEY_BACKSPACE */
|
|
0x060500f0 /* KEY_UNKNOWN */
|
|
0x06060019 /* KEY_P */
|
|
0x06070067 /* KEY_UP */
|
|
0x07000094 /* KEY_PROG1 */
|
|
0x07010095 /* KEY_PROG2 */
|
|
0x070200ca /* KEY_PROG3 */
|
|
0x070300cb /* KEY_PROG4 */
|
|
0x0704003e /* KEY_F4 */
|
|
0x070500f0 /* KEY_UNKNOWN */
|
|
0x07060160 /* KEY_OK */
|
|
0x0707006c>; /* KEY_DOWN */
|
|
linux,input-no-autorepeat;
|
|
};
|
|
|
|
&uart2 {
|
|
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART2_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART3_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_pins>;
|
|
};
|
|
|
|
&uart4 {
|
|
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
|
&omap4_pmx_core OMAP4_UART4_RX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins>;
|
|
};
|
|
|
|
&mcbsp1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcbsp2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dmic {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dmic_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mcpdm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcpdm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&twl_usb_comparator {
|
|
usb-supply = <&vusb>;
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
interface-type = <1>;
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&dss {
|
|
status = "ok";
|
|
};
|
|
|
|
&dsi1 {
|
|
status = "ok";
|
|
vdd-supply = <&vcxio>;
|
|
|
|
port {
|
|
dsi1_out_ep: endpoint {
|
|
remote-endpoint = <&lcd0_in>;
|
|
lanes = <0 1 2 3 4 5>;
|
|
};
|
|
};
|
|
|
|
lcd0: display {
|
|
compatible = "tpo,taal", "panel-dsi-cm";
|
|
label = "lcd0";
|
|
|
|
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
|
|
|
|
port {
|
|
lcd0_in: endpoint {
|
|
remote-endpoint = <&dsi1_out_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi2 {
|
|
status = "ok";
|
|
vdd-supply = <&vcxio>;
|
|
|
|
port {
|
|
dsi2_out_ep: endpoint {
|
|
remote-endpoint = <&lcd1_in>;
|
|
lanes = <0 1 2 3 4 5>;
|
|
};
|
|
};
|
|
|
|
lcd1: display {
|
|
compatible = "tpo,taal", "panel-dsi-cm";
|
|
label = "lcd1";
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
|
|
port {
|
|
lcd1_in: endpoint {
|
|
remote-endpoint = <&dsi2_out_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hdmi {
|
|
status = "ok";
|
|
vdda-supply = <&vdac>;
|
|
|
|
port {
|
|
hdmi_out: endpoint {
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
};
|
|
};
|
|
};
|