Adrian Hunter fa021cef1a mmc: core: Simplify card drive strength mask ... Card drive strength selection uses a callback to which a mask of supported drive strengths is passed. Currently, the bits are checked against the values in the SD specifications. That is not necessary because the callback will anyway match the mask against a valid value. Simplify by taking the mask as is but still ensuring that the default mandatory value (type B) is always supported. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-06-01 09:07:11 +02:00
..
bus.c	Revert "mmc: core: Convert mmc_driver to device_driver"	2015-04-17 11:48:01 +02:00
bus.h
core.c	mmc: core: Reset driver type to default	2015-06-01 09:07:10 +02:00
core.h	mmc: core: Add support for HS400 re-tuning	2015-06-01 09:06:57 +02:00
debugfs.c	mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd()	2014-11-10 12:40:44 +01:00
host.c	mmc: dt: Allow to specify that no write protect signal is present	2015-06-01 09:07:00 +02:00
host.h	mmc: host: Add facility to support re-tuning	2015-06-01 09:06:53 +02:00
Kconfig	mmc: core: Use MMC_UNSAFE_RESUME as default behavior	2014-02-13 22:58:15 -05:00
Makefile	mmc: pwrseq: add driver for emmc hardware reset	2015-02-04 09:45:09 +01:00
mmc_ops.c	mmc: core: Separate out the mmc_switch status check so it can be re-used	2015-06-01 09:06:56 +02:00
mmc_ops.h	mmc: core: Separate out the mmc_switch status check so it can be re-used	2015-06-01 09:06:56 +02:00
mmc.c	mmc: cast u8 to unsigned long long to avoid unexpected error	2015-06-01 09:07:03 +02:00
pwrseq_emmc.c	mmc: pwrseq: simplify alloc/free hooks	2015-03-23 14:13:42 +01:00
pwrseq_simple.c	mmc: pwrseq: simplify alloc/free hooks	2015-03-23 14:13:42 +01:00
pwrseq.c	mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()	2015-04-17 10:17:19 +02:00
pwrseq.h	mmc: pwrseq: simplify alloc/free hooks	2015-03-23 14:13:42 +01:00
quirks.c	mmc: quirks: Fixup debug message	2014-07-09 11:26:03 +02:00
sd_ops.c	mmc: sd: warn if card stays busy during init	2014-07-09 11:26:07 +02:00
sd_ops.h
sd.c	mmc: core: Simplify card drive strength mask	2015-06-01 09:07:11 +02:00
sd.h	mmc: drop the speed mode of card's state	2014-05-12 18:05:53 -04:00
sdio_bus.c	mmc: Add SDIO function devicetree subnode parsing	2015-01-19 09:56:26 +01:00
sdio_bus.h
sdio_cis.c
sdio_cis.h
sdio_io.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_irq.c	mmc: Convert pr_warning to pr_warn	2014-09-24 10:13:09 +02:00
sdio_ops.c	mmc: sdio: Use multiple scatter/gather list	2012-12-06 13:54:43 -05:00
sdio_ops.h
sdio.c	mmc: core: Simplify card drive strength mask	2015-06-01 09:07:11 +02:00
slot-gpio.c	mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts	2015-01-19 09:56:29 +01:00
slot-gpio.h	mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core	2015-01-19 09:56:17 +01:00