mirror of
https://github.com/torvalds/linux.git
synced 2024-11-05 19:41:54 +00:00
d65a14587a
Use snd_dmaengine_dai_dma_data for passing the dma parameters from clients to the pxa pcm lib. This does no functional change, it's just an intermedia step to migrate the pxa bits over to dmaengine. The calculation of dcmd is a transition hack which will be removed again in a later patch. It's just there to make the transition more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
408 lines
9.9 KiB
C
408 lines
9.9 KiB
C
/*
|
|
* pxa2xx-i2s.c -- ALSA Soc Audio Layer
|
|
*
|
|
* Copyright 2005 Wolfson Microelectronics PLC.
|
|
* Author: Liam Girdwood
|
|
* lrg@slimlogic.co.uk
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/audio.h>
|
|
|
|
#include "pxa2xx-i2s.h"
|
|
|
|
/*
|
|
* I2S Controller Register and Bit Definitions
|
|
*/
|
|
#define SACR0 __REG(0x40400000) /* Global Control Register */
|
|
#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
|
|
#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
|
|
#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
|
|
#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
|
|
#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
|
|
#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
|
|
|
|
#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
|
|
#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
|
|
#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
|
|
#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
|
|
#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
|
|
#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
|
|
#define SACR0_ENB (1 << 0) /* Enable I2S Link */
|
|
#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
|
|
#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
|
|
#define SACR1_DREC (1 << 3) /* Disable Recording Function */
|
|
#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
|
|
|
|
#define SASR0_I2SOFF (1 << 7) /* Controller Status */
|
|
#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
|
|
#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
|
|
#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
|
|
#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
|
|
#define SASR0_BSY (1 << 2) /* I2S Busy */
|
|
#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
|
|
#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
|
|
|
|
#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
|
|
#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
|
|
|
|
#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
|
|
#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
|
|
#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
|
|
#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
|
|
|
|
struct pxa_i2s_port {
|
|
u32 sadiv;
|
|
u32 sacr0;
|
|
u32 sacr1;
|
|
u32 saimr;
|
|
int master;
|
|
u32 fmt;
|
|
};
|
|
static struct pxa_i2s_port pxa_i2s;
|
|
static struct clk *clk_i2s;
|
|
static int clk_ena = 0;
|
|
|
|
static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
|
|
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
|
|
.addr = __PREG(SADR),
|
|
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.maxburst = 32,
|
|
.filter_data = &pxa2xx_i2s_pcm_stereo_out_req,
|
|
};
|
|
|
|
static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
|
|
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
|
|
.addr = __PREG(SADR),
|
|
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.maxburst = 32,
|
|
.filter_data = &pxa2xx_i2s_pcm_stereo_in_req,
|
|
};
|
|
|
|
static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
|
|
if (IS_ERR(clk_i2s))
|
|
return PTR_ERR(clk_i2s);
|
|
|
|
if (!cpu_dai->active)
|
|
SACR0 = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* wait for I2S controller to be ready */
|
|
static int pxa_i2s_wait(void)
|
|
{
|
|
int i;
|
|
|
|
/* flush the Rx FIFO */
|
|
for(i = 0; i < 16; i++)
|
|
SADR;
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
/* interface format */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
pxa_i2s.fmt = 0;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
pxa_i2s.fmt = SACR1_AMSL;
|
|
break;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
pxa_i2s.master = 1;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
pxa_i2s.master = 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
if (clk_id != PXA2XX_I2S_SYSCLK)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_dmaengine_dai_dma_data *dma_data;
|
|
|
|
BUG_ON(IS_ERR(clk_i2s));
|
|
clk_prepare_enable(clk_i2s);
|
|
clk_ena = 1;
|
|
pxa_i2s_wait();
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dma_data = &pxa2xx_i2s_pcm_stereo_out;
|
|
else
|
|
dma_data = &pxa2xx_i2s_pcm_stereo_in;
|
|
|
|
snd_soc_dai_set_dma_data(dai, substream, dma_data);
|
|
|
|
/* is port used by another stream */
|
|
if (!(SACR0 & SACR0_ENB)) {
|
|
SACR0 = 0;
|
|
if (pxa_i2s.master)
|
|
SACR0 |= SACR0_BCKD;
|
|
|
|
SACR0 |= SACR0_RFTH(14) | SACR0_TFTH(1);
|
|
SACR1 |= pxa_i2s.fmt;
|
|
}
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
SAIMR |= SAIMR_TFS;
|
|
else
|
|
SAIMR |= SAIMR_RFS;
|
|
|
|
switch (params_rate(params)) {
|
|
case 8000:
|
|
SADIV = 0x48;
|
|
break;
|
|
case 11025:
|
|
SADIV = 0x34;
|
|
break;
|
|
case 16000:
|
|
SADIV = 0x24;
|
|
break;
|
|
case 22050:
|
|
SADIV = 0x1a;
|
|
break;
|
|
case 44100:
|
|
SADIV = 0xd;
|
|
break;
|
|
case 48000:
|
|
SADIV = 0xc;
|
|
break;
|
|
case 96000: /* not in manual and possibly slightly inaccurate */
|
|
SADIV = 0x6;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
SACR1 &= ~SACR1_DRPL;
|
|
else
|
|
SACR1 &= ~SACR1_DREC;
|
|
SACR0 |= SACR0_ENB;
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
SACR1 |= SACR1_DRPL;
|
|
SAIMR &= ~SAIMR_TFS;
|
|
} else {
|
|
SACR1 |= SACR1_DREC;
|
|
SAIMR &= ~SAIMR_RFS;
|
|
}
|
|
|
|
if ((SACR1 & (SACR1_DREC | SACR1_DRPL)) == (SACR1_DREC | SACR1_DRPL)) {
|
|
SACR0 &= ~SACR0_ENB;
|
|
pxa_i2s_wait();
|
|
if (clk_ena) {
|
|
clk_disable_unprepare(clk_i2s);
|
|
clk_ena = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
|
|
{
|
|
/* store registers */
|
|
pxa_i2s.sacr0 = SACR0;
|
|
pxa_i2s.sacr1 = SACR1;
|
|
pxa_i2s.saimr = SAIMR;
|
|
pxa_i2s.sadiv = SADIV;
|
|
|
|
/* deactivate link */
|
|
SACR0 &= ~SACR0_ENB;
|
|
pxa_i2s_wait();
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_resume(struct snd_soc_dai *dai)
|
|
{
|
|
pxa_i2s_wait();
|
|
|
|
SACR0 = pxa_i2s.sacr0 & ~SACR0_ENB;
|
|
SACR1 = pxa_i2s.sacr1;
|
|
SAIMR = pxa_i2s.saimr;
|
|
SADIV = pxa_i2s.sadiv;
|
|
|
|
SACR0 = pxa_i2s.sacr0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa2xx_i2s_suspend NULL
|
|
#define pxa2xx_i2s_resume NULL
|
|
#endif
|
|
|
|
static int pxa2xx_i2s_probe(struct snd_soc_dai *dai)
|
|
{
|
|
clk_i2s = clk_get(dai->dev, "I2SCLK");
|
|
if (IS_ERR(clk_i2s))
|
|
return PTR_ERR(clk_i2s);
|
|
|
|
/*
|
|
* PXA Developer's Manual:
|
|
* If SACR0[ENB] is toggled in the middle of a normal operation,
|
|
* the SACR0[RST] bit must also be set and cleared to reset all
|
|
* I2S controller registers.
|
|
*/
|
|
SACR0 = SACR0_RST;
|
|
SACR0 = 0;
|
|
/* Make sure RPL and REC are disabled */
|
|
SACR1 = SACR1_DRPL | SACR1_DREC;
|
|
/* Along with FIFO servicing */
|
|
SAIMR &= ~(SAIMR_RFS | SAIMR_TFS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa2xx_i2s_remove(struct snd_soc_dai *dai)
|
|
{
|
|
clk_put(clk_i2s);
|
|
clk_i2s = ERR_PTR(-ENOENT);
|
|
return 0;
|
|
}
|
|
|
|
#define PXA2XX_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000)
|
|
|
|
static const struct snd_soc_dai_ops pxa_i2s_dai_ops = {
|
|
.startup = pxa2xx_i2s_startup,
|
|
.shutdown = pxa2xx_i2s_shutdown,
|
|
.trigger = pxa2xx_i2s_trigger,
|
|
.hw_params = pxa2xx_i2s_hw_params,
|
|
.set_fmt = pxa2xx_i2s_set_dai_fmt,
|
|
.set_sysclk = pxa2xx_i2s_set_dai_sysclk,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pxa_i2s_dai = {
|
|
.probe = pxa2xx_i2s_probe,
|
|
.remove = pxa2xx_i2s_remove,
|
|
.suspend = pxa2xx_i2s_suspend,
|
|
.resume = pxa2xx_i2s_resume,
|
|
.playback = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = PXA2XX_I2S_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = PXA2XX_I2S_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
|
|
.ops = &pxa_i2s_dai_ops,
|
|
.symmetric_rates = 1,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver pxa_i2s_component = {
|
|
.name = "pxa-i2s",
|
|
};
|
|
|
|
static int pxa2xx_i2s_drv_probe(struct platform_device *pdev)
|
|
{
|
|
return snd_soc_register_component(&pdev->dev, &pxa_i2s_component,
|
|
&pxa_i2s_dai, 1);
|
|
}
|
|
|
|
static int pxa2xx_i2s_drv_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver pxa2xx_i2s_driver = {
|
|
.probe = pxa2xx_i2s_drv_probe,
|
|
.remove = pxa2xx_i2s_drv_remove,
|
|
|
|
.driver = {
|
|
.name = "pxa2xx-i2s",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init pxa2xx_i2s_init(void)
|
|
{
|
|
clk_i2s = ERR_PTR(-ENOENT);
|
|
return platform_driver_register(&pxa2xx_i2s_driver);
|
|
}
|
|
|
|
static void __exit pxa2xx_i2s_exit(void)
|
|
{
|
|
platform_driver_unregister(&pxa2xx_i2s_driver);
|
|
}
|
|
|
|
module_init(pxa2xx_i2s_init);
|
|
module_exit(pxa2xx_i2s_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Liam Girdwood, lrg@slimlogic.co.uk");
|
|
MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa2xx-i2s");
|