Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-29 07:31:29 +00:00
Code Issues Packages Projects Releases Wiki Activity
f9508ef997
linux/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
Chris Morgan 9d3d2be86c arm64: dts: rockchip: Add chasis-type for Powkiddy rk3566 devices 
Add the optional node of chasis-type for Powkiddy RK3566 based
devices.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240325175133.19393-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10 08:32:47 +02:00

928 lines
19 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3566.dtsi"
/ {
model = "Powkiddy x55";
chassis-type = "handset";
compatible = "powkiddy,x55", "rockchip,rk3566";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc0;
mmc2 = &sdmmc2;
mmc3 = &sdmmc1;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
adc_joystick: adc-joystick {
compatible = "adc-joystick";
io-channels = <&saradc 0>, <&saradc 1>,
<&saradc 2>, <&saradc 3>;
poll-interval = <60>;
#address-cells = <1>;
#size-cells = <0>;
axis@0 {
reg = <0>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <15 1023>;
linux,code = <ABS_X>;
};
axis@1 {
reg = <1>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <1023 15>;
linux,code = <ABS_Y>;
};
axis@2 {
reg = <2>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <15 1023>;
linux,code = <ABS_RX>;
};
axis@3 {
reg = <3>;
abs-flat = <30>;
abs-fuzz = <20>;
abs-range = <1023 15>;
linux,code = <ABS_RY>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
pwms = <&pwm4 0 25000 0>;
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <4000000>;
charge-term-current-microamp = <300000>;
constant-charge-current-max-microamp = <2000000>;
constant-charge-voltage-max-microvolt = <4300000>;
factory-internal-resistance-micro-ohms = <91000>;
voltage-max-design-microvolt = <4138000>;
voltage-min-design-microvolt = <3400000>;
ocv-capacity-celsius = <20>;
ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
<3400000 0>;
};
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&btn_pins_ctrl>;
pinctrl-names = "default";
button-a {
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
label = "EAST";
linux,code = <BTN_EAST>;
};
button-b {
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
label = "SOUTH";
linux,code = <BTN_SOUTH>;
};
button-down {
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
button-l1 {
gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
label = "TL";
linux,code = <BTN_TL>;
};
button-l2 {
gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
label = "TL2";
linux,code = <BTN_TL2>;
};
button-left {
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
button-right {
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
button-select {
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
label = "SELECT";
linux,code = <BTN_SELECT>;
};
button-start {
gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
label = "START";
linux,code = <BTN_START>;
};
button-thumbl {
gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
label = "THUMBL";
linux,code = <BTN_THUMBL>;
};
button-thumbr {
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
label = "THUMBR";
linux,code = <BTN_THUMBR>;
};
button-r1 {
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
label = "TR";
linux,code = <BTN_TR>;
};
button-r2 {
gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
label = "TR2";
linux,code = <BTN_TR2>;
};
button-up {
gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
button-x {
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
label = "NORTH";
linux,code = <BTN_NORTH>;
};
button-y {
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
label = "WEST";
linux,code = <BTN_WEST>;
};
};
gpio_keys_vol: gpio-keys-vol {
compatible = "gpio-keys";
autorepeat;
pinctrl-0 = <&btn_pins_vol>;
pinctrl-names = "default";
button-voldown {
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
label = "VOLUMEDOWN";
linux,code = <KEY_VOLUMEDOWN>;
};
button-volup {
gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
label = "VOLUMEUP";
linux,code = <KEY_VOLUMEUP>;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
red_led: led-0 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_STATUS;
};
green_led: led-1 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_POWER;
};
amber_led: led-2 {
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_CHARGING;
};
};
hdmi-con {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c5>;
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk817 1>;
clock-names = "ext_clock";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
};
/* Channels reversed for both headphones and speakers. */
sound {
compatible = "simple-audio-card";
pinctrl-0 = <&hp_det>;
pinctrl-names = "default";
simple-audio-card,name = "rk817_ext";
simple-audio-card,aux-devs = <&spk_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Headphone", "Headphones",
"Speaker", "Internal Speakers";
simple-audio-card,routing =
"MICL", "Mic Jack",
"Headphones", "HPOL",
"Headphones", "HPOR",
"Internal Speakers", "Speaker Amp OUTL",
"Internal Speakers", "Speaker Amp OUTR",
"Speaker Amp INL", "HPOL",
"Speaker Amp INR", "HPOR";
simple-audio-card,pin-switches = "Internal Speakers";
simple-audio-card,codec {
sound-dai = <&rk817>;
};
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
};
spk_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&spk_amp_enable_h>;
pinctrl-names = "default";
sound-name-prefix = "Speaker Amp";
};
vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc5v0_host_en>;
pinctrl-names = "default";
regulator-name = "vcc5v0_host";
vin-supply = <&dcdc_boost>;
};
vcc_lcd: regulator-vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vcc_lcd_en>;
pinctrl-names = "default";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_lcd";
};
vcc_sys: regulator-vcc-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
regulator-name = "vcc_sys";
};
vcc_wifi: regulator-vcc-wifi {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&vcc_wifi_h>;
pinctrl-names = "default";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_wifi";
};
};
&combphy1 {
status = "okay";
};
&cru {
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
assigned-clock-rates = <32768>, <1200000000>,
<200000000>, <126400000>;
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&dsi_dphy0 {
status = "okay";
};
&dsi0 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
ports {
dsi0_in: port@0 {
reg = <0>;
dsi0_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi0>;
};
};
dsi0_out: port@1 {
reg = <1>;
mipi_out_panel: endpoint {
remote-endpoint = <&mipi_in_panel>;
};
};
};
panel: panel@0 {
compatible = "powkiddy,x55-panel", "himax,hx8394";
reg = <0>;
backlight = <&backlight>;
iovcc-supply = <&vcc_lcd>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_rst>;
reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
rotation = <270>;
vcc-supply = <&vcc_lcd>;
port {
mipi_in_panel: endpoint {
remote-endpoint = <&mipi_out_panel>;
};
};
};
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
pinctrl-0 = <&hdmitxm0_cec>;
pinctrl-names = "default";
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
clock-names = "mclk";
clock-output-names = "rk808-clkout1", "rk808-clkout2";
clocks = <&cru I2S1_MCLKOUT_TX>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
wakeup-source;
#clock-cells = <1>;
#sound-dai-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_sys>;
vcc9-supply = <&dcdc_boost>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca1v8_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc1v8_dvp";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc2v8_dvp: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc2v8_dvp";
regulator-state-mem {
regulator-off-in-suspend;
};
};
dcdc_boost: BOOST {
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <5400000>;
regulator-name = "boost";
regulator-state-mem {
regulator-off-in-suspend;
};
};
otg_switch: OTG_SWITCH {
regulator-name = "otg_switch";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
rk817_charger: charger {
monitored-battery = <&battery>;
rockchip,resistor-sense-micro-ohms = <10000>;
rockchip,sleep-enter-current-microamp = <150000>;
rockchip,sleep-filter-current-microamp = <100000>;
};
};
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-name = "vdd_cpu";
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c5 {
pinctrl-0 = <&i2c5m1_xfer>;
pinctrl-names = "default";
status = "okay";
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
<&i2s1m0_sdo0>;
pinctrl-names = "default";
rockchip,trcm-sync-tx-only;
status = "okay";
};
&pinctrl {
audio-amplifier {
spk_amp_enable_h: spk-amp-enable-h {
rockchip,pins =
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gpio-control {
btn_pins_ctrl: btn-pins-ctrl {
rockchip,pins =
<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
btn_pins_vol: btn-pins-vol {
rockchip,pins =
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
gpio-lcd {
lcd_rst: lcd-rst {
rockchip,pins =
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gpio-leds {
led_pins: led-pins {
rockchip,pins =
<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hp-detect {
hp_det: hp-det {
rockchip,pins =
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
};
vcc5v0_otg_en: vcc5v0-otg-en {
rockchip,pins =
<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
vcc-lcd {
vcc_lcd_en: vcc-lcd-en {
rockchip,pins =
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
vcc-wifi {
vcc_wifi_h: vcc-wifi-h {
rockchip,pins =
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcca1v8_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcca1v8_pmu>;
vccio5-supply = <&vcc2v8_dvp>;
vccio6-supply = <&vcc1v8_dvp>;
vccio7-supply = <&vcc_3v3>;
};
&pwm4 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
<&emmc_datastrobe>, <&emmc_rstnout>;
pinctrl-names = "default";
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
<&sdmmc0_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
pinctrl-names = "default";
vmmc-supply = <&vcc_wifi>;
status = "okay";
};
&sdmmc2 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
<&sdmmc2m1_det>;
pinctrl-names = "default";
sd-uhs-sdr104;
vqmmc-supply = <&vcc2v8_dvp>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
};
};
&uart2 {
status = "okay";
};
&usb_host0_xhci {
phys = <&usb2phy0_otg>;
phy-names = "usb2-phy";
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_otg {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
remote-endpoint = <&dsi0_in_vp1>;
};
};
Reference in New Issue View Git Blame Copy Permalink