mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 21:51:40 +00:00
20677b34cf
The firmware can only be patched once. The current code checks if the firmware supports the features required by the driver and then patches if it does not. This could lead to the device being patched twice if the device was patched before the driver took control, but with a firmware that doesn't support the features the driver requires. This would fail but potentially in unpredictable ways. The check should actually check the device is at the ROM version, and patch the device if it is. Then a separate later check should error out if the devices firmware is still too old to be supported. This will at least fail in a clean way with a nice error message. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240423102339.2363400-1-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org>
1221 lines
36 KiB
C
1221 lines
36 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* CS42L43 core driver
|
|
*
|
|
* Copyright (C) 2022-2023 Cirrus Logic, Inc. and
|
|
* Cirrus Logic International Semiconductor Ltd.
|
|
*/
|
|
|
|
#include <linux/array_size.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/build_bug.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/cs42l43.h>
|
|
#include <linux/mfd/cs42l43-regs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/soundwire/sdw.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "cs42l43.h"
|
|
|
|
#define CS42L43_RESET_DELAY_MS 20
|
|
|
|
#define CS42L43_SDW_ATTACH_TIMEOUT_MS 500
|
|
#define CS42L43_SDW_DETACH_TIMEOUT_MS 100
|
|
|
|
#define CS42L43_MCU_BOOT_STAGE1 1
|
|
#define CS42L43_MCU_BOOT_STAGE2 2
|
|
#define CS42L43_MCU_BOOT_STAGE3 3
|
|
#define CS42L43_MCU_BOOT_STAGE4 4
|
|
#define CS42L43_MCU_POLL_US 5000
|
|
#define CS42L43_MCU_CMD_TIMEOUT_US 20000
|
|
#define CS42L43_MCU_UPDATE_FORMAT 3
|
|
#define CS42L43_MCU_UPDATE_OFFSET 0x100000
|
|
#define CS42L43_MCU_UPDATE_TIMEOUT_US 500000
|
|
#define CS42L43_MCU_UPDATE_RETRIES 5
|
|
|
|
#define CS42L43_MCU_ROM_REV 0x2001
|
|
#define CS42L43_MCU_ROM_BIOS_REV 0x0000
|
|
|
|
#define CS42L43_MCU_SUPPORTED_REV 0x2105
|
|
#define CS42L43_MCU_SHADOW_REGS_REQUIRED_REV 0x2200
|
|
#define CS42L43_MCU_SUPPORTED_BIOS_REV 0x0001
|
|
|
|
#define CS42L43_VDDP_DELAY_US 50
|
|
#define CS42L43_VDDD_DELAY_US 1000
|
|
|
|
#define CS42L43_AUTOSUSPEND_TIME_MS 250
|
|
|
|
struct cs42l43_patch_header {
|
|
__le16 version;
|
|
__le16 size;
|
|
__u8 reserved;
|
|
__u8 secure;
|
|
__le16 bss_size;
|
|
__le32 apply_addr;
|
|
__le32 checksum;
|
|
__le32 sha;
|
|
__le16 swrev;
|
|
__le16 patchid;
|
|
__le16 ipxid;
|
|
__le16 romver;
|
|
__le32 load_addr;
|
|
} __packed;
|
|
|
|
static const struct reg_sequence cs42l43_reva_patch[] = {
|
|
{ 0x4000, 0x00000055 },
|
|
{ 0x4000, 0x000000AA },
|
|
{ 0x10084, 0x00000000 },
|
|
{ 0x1741C, 0x00CD2000 },
|
|
{ 0x1718C, 0x00000003 },
|
|
{ 0x4000, 0x00000000 },
|
|
{ CS42L43_CCM_BLK_CLK_CONTROL, 0x00000002 },
|
|
{ CS42L43_HPPATHVOL, 0x011B011B },
|
|
{ CS42L43_OSC_DIV_SEL, 0x00000001 },
|
|
{ CS42L43_DACCNFG2, 0x00000005 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 },
|
|
{ CS42L43_RELID, 0x0000000F },
|
|
};
|
|
|
|
const struct reg_default cs42l43_reg_default[CS42L43_N_DEFAULTS] = {
|
|
{ CS42L43_DRV_CTRL1, 0x000186C0 },
|
|
{ CS42L43_DRV_CTRL3, 0x286DB018 },
|
|
{ CS42L43_DRV_CTRL4, 0x000006D8 },
|
|
{ CS42L43_DRV_CTRL_5, 0x136C00C0 },
|
|
{ CS42L43_GPIO_CTRL1, 0x00000707 },
|
|
{ CS42L43_GPIO_CTRL2, 0x00000000 },
|
|
{ CS42L43_GPIO_FN_SEL, 0x00000004 },
|
|
{ CS42L43_MCLK_SRC_SEL, 0x00000000 },
|
|
{ CS42L43_SAMPLE_RATE1, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE2, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE3, 0x00000003 },
|
|
{ CS42L43_SAMPLE_RATE4, 0x00000003 },
|
|
{ CS42L43_PLL_CONTROL, 0x00000000 },
|
|
{ CS42L43_FS_SELECT1, 0x00000000 },
|
|
{ CS42L43_FS_SELECT2, 0x00000000 },
|
|
{ CS42L43_FS_SELECT3, 0x00000000 },
|
|
{ CS42L43_FS_SELECT4, 0x00000000 },
|
|
{ CS42L43_PDM_CONTROL, 0x00000000 },
|
|
{ CS42L43_ASP_CLK_CONFIG1, 0x00010001 },
|
|
{ CS42L43_ASP_CLK_CONFIG2, 0x00000000 },
|
|
{ CS42L43_OSC_DIV_SEL, 0x00000001 },
|
|
{ CS42L43_ADC_B_CTRL1, 0x00000000 },
|
|
{ CS42L43_ADC_B_CTRL2, 0x00000000 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL1, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL2, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL3, 0x00000001 },
|
|
{ CS42L43_DECIM_HPF_WNF_CTRL4, 0x00000001 },
|
|
{ CS42L43_DMIC_PDM_CTRL, 0x00000000 },
|
|
{ CS42L43_DECIM_VOL_CTRL_CH1_CH2, 0x20122012 },
|
|
{ CS42L43_DECIM_VOL_CTRL_CH3_CH4, 0x20122012 },
|
|
{ CS42L43_INTP_VOLUME_CTRL1, 0x00000180 },
|
|
{ CS42L43_INTP_VOLUME_CTRL2, 0x00000180 },
|
|
{ CS42L43_AMP1_2_VOL_RAMP, 0x00000022 },
|
|
{ CS42L43_ASP_CTRL, 0x00000004 },
|
|
{ CS42L43_ASP_FSYNC_CTRL1, 0x000000FA },
|
|
{ CS42L43_ASP_FSYNC_CTRL2, 0x00000001 },
|
|
{ CS42L43_ASP_FSYNC_CTRL3, 0x00000000 },
|
|
{ CS42L43_ASP_FSYNC_CTRL4, 0x000001F4 },
|
|
{ CS42L43_ASP_DATA_CTRL, 0x0000003A },
|
|
{ CS42L43_ASP_RX_EN, 0x00000000 },
|
|
{ CS42L43_ASP_TX_EN, 0x00000000 },
|
|
{ CS42L43_ASP_RX_CH1_CTRL, 0x00170001 },
|
|
{ CS42L43_ASP_RX_CH2_CTRL, 0x00170031 },
|
|
{ CS42L43_ASP_RX_CH3_CTRL, 0x00170061 },
|
|
{ CS42L43_ASP_RX_CH4_CTRL, 0x00170091 },
|
|
{ CS42L43_ASP_RX_CH5_CTRL, 0x001700C1 },
|
|
{ CS42L43_ASP_RX_CH6_CTRL, 0x001700F1 },
|
|
{ CS42L43_ASP_TX_CH1_CTRL, 0x00170001 },
|
|
{ CS42L43_ASP_TX_CH2_CTRL, 0x00170031 },
|
|
{ CS42L43_ASP_TX_CH3_CTRL, 0x00170061 },
|
|
{ CS42L43_ASP_TX_CH4_CTRL, 0x00170091 },
|
|
{ CS42L43_ASP_TX_CH5_CTRL, 0x001700C1 },
|
|
{ CS42L43_ASP_TX_CH6_CTRL, 0x001700F1 },
|
|
{ CS42L43_ASPTX1_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX2_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX3_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX4_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX5_INPUT, 0x00000000 },
|
|
{ CS42L43_ASPTX6_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH3_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP1_CH4_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP2_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP2_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP3_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP3_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP4_CH1_INPUT, 0x00000000 },
|
|
{ CS42L43_SWIRE_DP4_CH2_INPUT, 0x00000000 },
|
|
{ CS42L43_ASRC_INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT3_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_INT4_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC3_INPUT1, 0x00000000 },
|
|
{ CS42L43_ASRC_DEC4_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC1DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2INT1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2INT2_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2DEC1_INPUT1, 0x00000000 },
|
|
{ CS42L43_ISRC2DEC2_INPUT1, 0x00000000 },
|
|
{ CS42L43_EQ1MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_EQ1MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_EQ2MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_SPDIF1_INPUT1, 0x00000000 },
|
|
{ CS42L43_SPDIF2_INPUT1, 0x00000000 },
|
|
{ CS42L43_AMP1MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP1MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP2MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP3MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT1, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT2, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT3, 0x00800000 },
|
|
{ CS42L43_AMP4MIX_INPUT4, 0x00800000 },
|
|
{ CS42L43_ASRC_INT_ENABLES, 0x00000100 },
|
|
{ CS42L43_ASRC_DEC_ENABLES, 0x00000100 },
|
|
{ CS42L43_PDNCNTL, 0x00000000 },
|
|
{ CS42L43_RINGSENSE_DEB_CTRL, 0x0000001B },
|
|
{ CS42L43_TIPSENSE_DEB_CTRL, 0x0000001B },
|
|
{ CS42L43_HS2, 0x050106F3 },
|
|
{ CS42L43_STEREO_MIC_CTRL, 0x00000000 },
|
|
{ CS42L43_STEREO_MIC_CLAMP_CTRL, 0x00000001 },
|
|
{ CS42L43_BLOCK_EN2, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN3, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN4, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN5, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN6, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN7, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN8, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN9, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN10, 0x00000000 },
|
|
{ CS42L43_BLOCK_EN11, 0x00000000 },
|
|
{ CS42L43_TONE_CH1_CTRL, 0x00000000 },
|
|
{ CS42L43_TONE_CH2_CTRL, 0x00000000 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_1, 0x00000003 },
|
|
{ CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL, 0x02000003 },
|
|
{ CS42L43_MIC_DETECT_CONTROL_ANDROID, 0x80790079 },
|
|
{ CS42L43_ISRC1_CTRL, 0x00000000 },
|
|
{ CS42L43_ISRC2_CTRL, 0x00000000 },
|
|
{ CS42L43_CTRL_REG, 0x00000006 },
|
|
{ CS42L43_FDIV_FRAC, 0x40000000 },
|
|
{ CS42L43_CAL_RATIO, 0x00000080 },
|
|
{ CS42L43_SPI_CLK_CONFIG1, 0x00000001 },
|
|
{ CS42L43_SPI_CONFIG1, 0x00000000 },
|
|
{ CS42L43_SPI_CONFIG2, 0x00000000 },
|
|
{ CS42L43_SPI_CONFIG3, 0x00000001 },
|
|
{ CS42L43_SPI_CONFIG4, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG3, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG4, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG5, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG6, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG7, 0x00000000 },
|
|
{ CS42L43_TRAN_CONFIG8, 0x00000000 },
|
|
{ CS42L43_DACCNFG1, 0x00000008 },
|
|
{ CS42L43_DACCNFG2, 0x00000005 },
|
|
{ CS42L43_HPPATHVOL, 0x011B011B },
|
|
{ CS42L43_PGAVOL, 0x00003470 },
|
|
{ CS42L43_LOADDETENA, 0x00000000 },
|
|
{ CS42L43_CTRL, 0x00000037 },
|
|
{ CS42L43_COEFF_DATA_IN0, 0x00000000 },
|
|
{ CS42L43_COEFF_RD_WR0, 0x00000000 },
|
|
{ CS42L43_START_EQZ0, 0x00000000 },
|
|
{ CS42L43_MUTE_EQ_IN0, 0x00000000 },
|
|
{ CS42L43_DECIM_MASK, 0x0000000F },
|
|
{ CS42L43_EQ_MIX_MASK, 0x0000000F },
|
|
{ CS42L43_ASP_MASK, 0x000000FF },
|
|
{ CS42L43_PLL_MASK, 0x00000003 },
|
|
{ CS42L43_SOFT_MASK, 0x0000FFFF },
|
|
{ CS42L43_SWIRE_MASK, 0x00007FFF },
|
|
{ CS42L43_MSM_MASK, 0x00000FFF },
|
|
{ CS42L43_ACC_DET_MASK, 0x00000FFF },
|
|
{ CS42L43_I2C_TGT_MASK, 0x00000003 },
|
|
{ CS42L43_SPI_MSTR_MASK, 0x00000007 },
|
|
{ CS42L43_SW_TO_SPI_BRIDGE_MASK, 0x00000001 },
|
|
{ CS42L43_OTP_MASK, 0x00000007 },
|
|
{ CS42L43_CLASS_D_AMP_MASK, 0x00003FFF },
|
|
{ CS42L43_GPIO_INT_MASK, 0x0000003F },
|
|
{ CS42L43_ASRC_MASK, 0x0000000F },
|
|
{ CS42L43_HPOUT_MASK, 0x00000003 },
|
|
};
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_reg_default, MFD_CS42L43);
|
|
|
|
bool cs42l43_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_DEVID:
|
|
case CS42L43_REVID:
|
|
case CS42L43_RELID:
|
|
case CS42L43_SFT_RESET:
|
|
case CS42L43_DRV_CTRL1:
|
|
case CS42L43_DRV_CTRL3:
|
|
case CS42L43_DRV_CTRL4:
|
|
case CS42L43_DRV_CTRL_5:
|
|
case CS42L43_GPIO_CTRL1:
|
|
case CS42L43_GPIO_CTRL2:
|
|
case CS42L43_GPIO_STS:
|
|
case CS42L43_GPIO_FN_SEL:
|
|
case CS42L43_MCLK_SRC_SEL:
|
|
case CS42L43_SAMPLE_RATE1 ... CS42L43_SAMPLE_RATE4:
|
|
case CS42L43_PLL_CONTROL:
|
|
case CS42L43_FS_SELECT1 ... CS42L43_FS_SELECT4:
|
|
case CS42L43_PDM_CONTROL:
|
|
case CS42L43_ASP_CLK_CONFIG1 ... CS42L43_ASP_CLK_CONFIG2:
|
|
case CS42L43_OSC_DIV_SEL:
|
|
case CS42L43_ADC_B_CTRL1 ... CS42L43_ADC_B_CTRL2:
|
|
case CS42L43_DECIM_HPF_WNF_CTRL1 ... CS42L43_DECIM_HPF_WNF_CTRL4:
|
|
case CS42L43_DMIC_PDM_CTRL:
|
|
case CS42L43_DECIM_VOL_CTRL_CH1_CH2 ... CS42L43_DECIM_VOL_CTRL_CH3_CH4:
|
|
case CS42L43_INTP_VOLUME_CTRL1 ... CS42L43_INTP_VOLUME_CTRL2:
|
|
case CS42L43_AMP1_2_VOL_RAMP:
|
|
case CS42L43_ASP_CTRL:
|
|
case CS42L43_ASP_FSYNC_CTRL1 ... CS42L43_ASP_FSYNC_CTRL4:
|
|
case CS42L43_ASP_DATA_CTRL:
|
|
case CS42L43_ASP_RX_EN ... CS42L43_ASP_TX_EN:
|
|
case CS42L43_ASP_RX_CH1_CTRL ... CS42L43_ASP_RX_CH6_CTRL:
|
|
case CS42L43_ASP_TX_CH1_CTRL ... CS42L43_ASP_TX_CH6_CTRL:
|
|
case CS42L43_OTP_REVISION_ID:
|
|
case CS42L43_ASPTX1_INPUT:
|
|
case CS42L43_ASPTX2_INPUT:
|
|
case CS42L43_ASPTX3_INPUT:
|
|
case CS42L43_ASPTX4_INPUT:
|
|
case CS42L43_ASPTX5_INPUT:
|
|
case CS42L43_ASPTX6_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH3_INPUT:
|
|
case CS42L43_SWIRE_DP1_CH4_INPUT:
|
|
case CS42L43_SWIRE_DP2_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP2_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP3_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP3_CH2_INPUT:
|
|
case CS42L43_SWIRE_DP4_CH1_INPUT:
|
|
case CS42L43_SWIRE_DP4_CH2_INPUT:
|
|
case CS42L43_ASRC_INT1_INPUT1:
|
|
case CS42L43_ASRC_INT2_INPUT1:
|
|
case CS42L43_ASRC_INT3_INPUT1:
|
|
case CS42L43_ASRC_INT4_INPUT1:
|
|
case CS42L43_ASRC_DEC1_INPUT1:
|
|
case CS42L43_ASRC_DEC2_INPUT1:
|
|
case CS42L43_ASRC_DEC3_INPUT1:
|
|
case CS42L43_ASRC_DEC4_INPUT1:
|
|
case CS42L43_ISRC1INT1_INPUT1:
|
|
case CS42L43_ISRC1INT2_INPUT1:
|
|
case CS42L43_ISRC1DEC1_INPUT1:
|
|
case CS42L43_ISRC1DEC2_INPUT1:
|
|
case CS42L43_ISRC2INT1_INPUT1:
|
|
case CS42L43_ISRC2INT2_INPUT1:
|
|
case CS42L43_ISRC2DEC1_INPUT1:
|
|
case CS42L43_ISRC2DEC2_INPUT1:
|
|
case CS42L43_EQ1MIX_INPUT1 ... CS42L43_EQ1MIX_INPUT4:
|
|
case CS42L43_EQ2MIX_INPUT1 ... CS42L43_EQ2MIX_INPUT4:
|
|
case CS42L43_SPDIF1_INPUT1:
|
|
case CS42L43_SPDIF2_INPUT1:
|
|
case CS42L43_AMP1MIX_INPUT1 ... CS42L43_AMP1MIX_INPUT4:
|
|
case CS42L43_AMP2MIX_INPUT1 ... CS42L43_AMP2MIX_INPUT4:
|
|
case CS42L43_AMP3MIX_INPUT1 ... CS42L43_AMP3MIX_INPUT4:
|
|
case CS42L43_AMP4MIX_INPUT1 ... CS42L43_AMP4MIX_INPUT4:
|
|
case CS42L43_ASRC_INT_ENABLES ... CS42L43_ASRC_DEC_ENABLES:
|
|
case CS42L43_PDNCNTL:
|
|
case CS42L43_RINGSENSE_DEB_CTRL:
|
|
case CS42L43_TIPSENSE_DEB_CTRL:
|
|
case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS:
|
|
case CS42L43_HS2:
|
|
case CS42L43_HS_STAT:
|
|
case CS42L43_MCU_SW_INTERRUPT:
|
|
case CS42L43_STEREO_MIC_CTRL:
|
|
case CS42L43_STEREO_MIC_CLAMP_CTRL:
|
|
case CS42L43_BLOCK_EN2 ... CS42L43_BLOCK_EN11:
|
|
case CS42L43_TONE_CH1_CTRL ... CS42L43_TONE_CH2_CTRL:
|
|
case CS42L43_MIC_DETECT_CONTROL_1:
|
|
case CS42L43_DETECT_STATUS_1:
|
|
case CS42L43_HS_BIAS_SENSE_AND_CLAMP_AUTOCONTROL:
|
|
case CS42L43_MIC_DETECT_CONTROL_ANDROID:
|
|
case CS42L43_ISRC1_CTRL:
|
|
case CS42L43_ISRC2_CTRL:
|
|
case CS42L43_CTRL_REG:
|
|
case CS42L43_FDIV_FRAC:
|
|
case CS42L43_CAL_RATIO:
|
|
case CS42L43_SPI_CLK_CONFIG1:
|
|
case CS42L43_SPI_CONFIG1 ... CS42L43_SPI_CONFIG4:
|
|
case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2:
|
|
case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG8:
|
|
case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3:
|
|
case CS42L43_TX_DATA:
|
|
case CS42L43_RX_DATA:
|
|
case CS42L43_DACCNFG1 ... CS42L43_DACCNFG2:
|
|
case CS42L43_HPPATHVOL:
|
|
case CS42L43_PGAVOL:
|
|
case CS42L43_LOADDETRESULTS:
|
|
case CS42L43_LOADDETENA:
|
|
case CS42L43_CTRL:
|
|
case CS42L43_COEFF_DATA_IN0:
|
|
case CS42L43_COEFF_RD_WR0:
|
|
case CS42L43_INIT_DONE0:
|
|
case CS42L43_START_EQZ0:
|
|
case CS42L43_MUTE_EQ_IN0:
|
|
case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT:
|
|
case CS42L43_DECIM_MASK ... CS42L43_HPOUT_MASK:
|
|
case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW:
|
|
case CS42L43_BOOT_CONTROL:
|
|
case CS42L43_BLOCK_EN:
|
|
case CS42L43_SHUTTER_CONTROL:
|
|
case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_readable_register, MFD_CS42L43);
|
|
|
|
bool cs42l43_precious_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_SFT_RESET:
|
|
case CS42L43_TX_DATA:
|
|
case CS42L43_RX_DATA:
|
|
case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT:
|
|
case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_precious_register, MFD_CS42L43);
|
|
|
|
bool cs42l43_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case CS42L43_DEVID:
|
|
case CS42L43_REVID:
|
|
case CS42L43_RELID:
|
|
case CS42L43_GPIO_STS:
|
|
case CS42L43_OTP_REVISION_ID:
|
|
case CS42L43_TIP_RING_SENSE_INTERRUPT_STATUS:
|
|
case CS42L43_HS_STAT:
|
|
case CS42L43_MCU_SW_INTERRUPT:
|
|
case CS42L43_DETECT_STATUS_1:
|
|
case CS42L43_SPI_STATUS1 ... CS42L43_SPI_STATUS2:
|
|
case CS42L43_TRAN_CONFIG1 ... CS42L43_TRAN_CONFIG2:
|
|
case CS42L43_TRAN_CONFIG8:
|
|
case CS42L43_TRAN_STATUS1 ... CS42L43_TRAN_STATUS3:
|
|
case CS42L43_LOADDETRESULTS:
|
|
case CS42L43_INIT_DONE0:
|
|
case CS42L43_DECIM_INT_SHADOW ... CS42L43_HP_OUT_SHADOW:
|
|
case CS42L43_BOOT_CONTROL:
|
|
case CS42L43_BLOCK_EN:
|
|
return true;
|
|
default:
|
|
return cs42l43_precious_register(dev, reg);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_volatile_register, MFD_CS42L43);
|
|
|
|
#define CS42L43_IRQ_OFFSET(reg) ((CS42L43_##reg##_INT) - CS42L43_DECIM_INT)
|
|
|
|
#define CS42L43_IRQ_REG(name, reg) REGMAP_IRQ_REG(CS42L43_##name, \
|
|
CS42L43_IRQ_OFFSET(reg), \
|
|
CS42L43_##name##_INT_MASK)
|
|
|
|
static const struct regmap_irq cs42l43_regmap_irqs[] = {
|
|
CS42L43_IRQ_REG(PLL_LOST_LOCK, PLL),
|
|
CS42L43_IRQ_REG(PLL_READY, PLL),
|
|
|
|
CS42L43_IRQ_REG(HP_STARTUP_DONE, MSM),
|
|
CS42L43_IRQ_REG(HP_SHUTDOWN_DONE, MSM),
|
|
CS42L43_IRQ_REG(HSDET_DONE, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_UNPLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_PLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_UNPLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_PLUG_DB, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_UNPLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(TIPSENSE_PLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_UNPLUG_PDET, MSM),
|
|
CS42L43_IRQ_REG(RINGSENSE_PLUG_PDET, MSM),
|
|
|
|
CS42L43_IRQ_REG(HS2_BIAS_SENSE, ACC_DET),
|
|
CS42L43_IRQ_REG(HS1_BIAS_SENSE, ACC_DET),
|
|
CS42L43_IRQ_REG(DC_DETECT1_FALSE, ACC_DET),
|
|
CS42L43_IRQ_REG(DC_DETECT1_TRUE, ACC_DET),
|
|
CS42L43_IRQ_REG(HSBIAS_CLAMPED, ACC_DET),
|
|
CS42L43_IRQ_REG(HS3_4_BIAS_SENSE, ACC_DET),
|
|
|
|
CS42L43_IRQ_REG(AMP2_CLK_STOP_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_CLK_STOP_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_VDDSPK_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_VDDSPK_FAULT, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_SHUTDOWN_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_SHUTDOWN_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_STARTUP_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_STARTUP_DONE, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_THERM_SHDN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_THERM_SHDN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_THERM_WARN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_THERM_WARN, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP2_SCDET, CLASS_D_AMP),
|
|
CS42L43_IRQ_REG(AMP1_SCDET, CLASS_D_AMP),
|
|
|
|
CS42L43_IRQ_REG(GPIO3_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO3_RISE, GPIO),
|
|
CS42L43_IRQ_REG(GPIO2_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO2_RISE, GPIO),
|
|
CS42L43_IRQ_REG(GPIO1_FALL, GPIO),
|
|
CS42L43_IRQ_REG(GPIO1_RISE, GPIO),
|
|
|
|
CS42L43_IRQ_REG(HP_ILIMIT, HPOUT),
|
|
CS42L43_IRQ_REG(HP_LOADDET_DONE, HPOUT),
|
|
};
|
|
|
|
static const struct regmap_irq_chip cs42l43_irq_chip = {
|
|
.name = "cs42l43",
|
|
|
|
.status_base = CS42L43_DECIM_INT,
|
|
.mask_base = CS42L43_DECIM_MASK,
|
|
.num_regs = 16,
|
|
|
|
.irqs = cs42l43_regmap_irqs,
|
|
.num_irqs = ARRAY_SIZE(cs42l43_regmap_irqs),
|
|
|
|
.runtime_pm = true,
|
|
};
|
|
|
|
static const char * const cs42l43_core_supplies[] = {
|
|
"vdd-a", "vdd-io", "vdd-cp",
|
|
};
|
|
|
|
static const char * const cs42l43_parent_supplies[] = { "vdd-amp" };
|
|
|
|
static const struct mfd_cell cs42l43_devs[] = {
|
|
{ .name = "cs42l43-pinctrl", },
|
|
{ .name = "cs42l43-spi", },
|
|
{
|
|
.name = "cs42l43-codec",
|
|
.parent_supplies = cs42l43_parent_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(cs42l43_parent_supplies),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* If the device is connected over Soundwire, as well as soft resetting the
|
|
* device, this function will also way for the device to detach from the bus
|
|
* before returning.
|
|
*/
|
|
static int cs42l43_soft_reset(struct cs42l43 *cs42l43)
|
|
{
|
|
static const struct reg_sequence reset[] = {
|
|
{ CS42L43_SFT_RESET, CS42L43_SFT_RESET_VAL },
|
|
};
|
|
|
|
reinit_completion(&cs42l43->device_detach);
|
|
|
|
/*
|
|
* Apply cache only because the soft reset will cause the device to
|
|
* detach from the soundwire bus.
|
|
*/
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset));
|
|
|
|
msleep(CS42L43_RESET_DELAY_MS);
|
|
|
|
if (cs42l43->sdw) {
|
|
unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT_MS);
|
|
unsigned long time;
|
|
|
|
time = wait_for_completion_timeout(&cs42l43->device_detach, timeout);
|
|
if (!time) {
|
|
dev_err(cs42l43->dev, "Timed out waiting for device detach\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* This function is essentially a no-op on I2C, but will wait for the device to
|
|
* attach when the device is used on a SoundWire bus.
|
|
*/
|
|
static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43)
|
|
{
|
|
if (!cs42l43->attached) {
|
|
unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT_MS);
|
|
unsigned long time;
|
|
|
|
time = wait_for_completion_timeout(&cs42l43->device_attach, timeout);
|
|
if (!time) {
|
|
dev_err(cs42l43->dev, "Timed out waiting for device re-attach\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
regcache_cache_only(cs42l43->regmap, false);
|
|
|
|
/* The hardware requires enabling OSC_DIV before doing any SoundWire reads. */
|
|
if (cs42l43->sdw)
|
|
regmap_write(cs42l43->regmap, CS42L43_OSC_DIV_SEL,
|
|
CS42L43_OSC_DIV2_EN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function will advance the firmware into boot stage 3 from boot stage 2.
|
|
* Boot stage 3 is required to send commands to the firmware. This is achieved
|
|
* by setting the firmware NEED configuration register to zero, this indicates
|
|
* no configuration is required forcing the firmware to advance to boot stage 3.
|
|
*
|
|
* Later revisions of the firmware require the use of an alternative register
|
|
* for this purpose, which is indicated through the shadow flag.
|
|
*/
|
|
static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow)
|
|
{
|
|
unsigned int need_reg = CS42L43_NEED_CONFIGS;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (shadow)
|
|
need_reg = CS42L43_FW_SH_BOOT_CFG_NEED_CONFIGS;
|
|
|
|
regmap_write(cs42l43->regmap, need_reg, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS,
|
|
val, (val == CS42L43_MCU_BOOT_STAGE3),
|
|
CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val);
|
|
return ret;
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* This function will return the firmware to boot stage 2 from boot stage 3.
|
|
* Boot stage 2 is required to apply updates to the firmware. This is achieved
|
|
* by setting the firmware NEED configuration register to FW_PATCH_NEED_CFG,
|
|
* setting the HAVE configuration register to 0, and soft resetting. The
|
|
* firmware will see it is missing a patch configuration and will pause in boot
|
|
* stage 2.
|
|
*
|
|
* Note: Unlike cs42l43_mcu_stage_2_3 there is no need to consider the shadow
|
|
* register here as the driver will only return to boot stage 2 if the firmware
|
|
* requires update which means the revision does not include shadow register
|
|
* support.
|
|
*/
|
|
static int cs42l43_mcu_stage_3_2(struct cs42l43 *cs42l43)
|
|
{
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_NEED_CONFIGS,
|
|
CS42L43_FW_PATCH_NEED_CFG_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_HAVE_CONFIGS, 0);
|
|
|
|
return cs42l43_soft_reset(cs42l43);
|
|
}
|
|
|
|
/*
|
|
* Disable the firmware running on the device such that the driver can access
|
|
* the registers without fear of the MCU changing them under it.
|
|
*/
|
|
static int cs42l43_mcu_disable(struct cs42l43 *cs42l43)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_REG,
|
|
CS42L43_FW_MISSION_CTRL_MM_MCU_CFG_DISABLE_VAL);
|
|
regmap_write(cs42l43->regmap, CS42L43_FW_MISSION_CTRL_MM_CTRL_SELECTION,
|
|
CS42L43_FW_MM_CTRL_MCU_SEL_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_CONTROL_IND_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
|
|
(val & CS42L43_CONTROL_APPLIED_INT_MASK),
|
|
CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val);
|
|
return ret;
|
|
}
|
|
|
|
/* Soft reset to clear any register state the firmware left behind. */
|
|
return cs42l43_soft_reset(cs42l43);
|
|
}
|
|
|
|
/*
|
|
* Callback to load firmware updates.
|
|
*/
|
|
static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *context)
|
|
{
|
|
struct cs42l43 *cs42l43 = context;
|
|
const struct cs42l43_patch_header *hdr;
|
|
unsigned int loadaddr, val;
|
|
int ret;
|
|
|
|
if (!firmware) {
|
|
dev_err(cs42l43->dev, "Failed to load firmware\n");
|
|
cs42l43->firmware_error = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
hdr = (const struct cs42l43_patch_header *)&firmware->data[0];
|
|
loadaddr = le32_to_cpu(hdr->load_addr);
|
|
|
|
if (le16_to_cpu(hdr->version) != CS42L43_MCU_UPDATE_FORMAT) {
|
|
dev_err(cs42l43->dev, "Bad firmware file format: %d\n", hdr->version);
|
|
cs42l43->firmware_error = -EINVAL;
|
|
goto err_release;
|
|
}
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_PATCH_START_ADDR, loadaddr);
|
|
regmap_bulk_write(cs42l43->regmap, loadaddr + CS42L43_MCU_UPDATE_OFFSET,
|
|
&firmware->data[0], firmware->size / sizeof(u32));
|
|
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, CS42L43_PATCH_IND_MASK);
|
|
regmap_write(cs42l43->regmap, CS42L43_MCU_SW_INTERRUPT, 0);
|
|
|
|
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
|
|
(val & CS42L43_PATCH_APPLIED_INT_MASK),
|
|
CS42L43_MCU_POLL_US, CS42L43_MCU_UPDATE_TIMEOUT_US);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val);
|
|
cs42l43->firmware_error = ret;
|
|
goto err_release;
|
|
}
|
|
|
|
err_release:
|
|
release_firmware(firmware);
|
|
err:
|
|
complete(&cs42l43->firmware_download);
|
|
}
|
|
|
|
static int cs42l43_mcu_is_hw_compatible(struct cs42l43 *cs42l43,
|
|
unsigned int mcu_rev,
|
|
unsigned int bios_rev)
|
|
{
|
|
/*
|
|
* The firmware has two revision numbers bringing either of them up to a
|
|
* supported version will provide the disable the driver requires.
|
|
*/
|
|
if (mcu_rev < CS42L43_MCU_SUPPORTED_REV &&
|
|
bios_rev < CS42L43_MCU_SUPPORTED_BIOS_REV) {
|
|
dev_err(cs42l43->dev, "Firmware too old to support disable\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The process of updating the firmware is split into a series of steps, at the
|
|
* end of each step a soft reset of the device might be required which will
|
|
* require the driver to wait for the device to re-attach on the SoundWire bus,
|
|
* if that control bus is being used.
|
|
*/
|
|
static int cs42l43_mcu_update_step(struct cs42l43 *cs42l43)
|
|
{
|
|
unsigned int mcu_rev, bios_rev, boot_status, secure_cfg;
|
|
bool patched, shadow;
|
|
int ret;
|
|
|
|
/* Clear any stale software interrupt bits. */
|
|
regmap_read(cs42l43->regmap, CS42L43_SOFT_INT, &mcu_rev);
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_STATUS, &boot_status);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read boot status: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_MCU_SW_REV, &mcu_rev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read firmware revision: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
bios_rev = (((mcu_rev & CS42L43_BIOS_MAJOR_REV_MASK) << 12) |
|
|
((mcu_rev & CS42L43_BIOS_MINOR_REV_MASK) << 4) |
|
|
((mcu_rev & CS42L43_BIOS_SUBMINOR_REV_MASK) >> 8)) >>
|
|
CS42L43_BIOS_MAJOR_REV_SHIFT;
|
|
mcu_rev = ((mcu_rev & CS42L43_FW_MAJOR_REV_MASK) << 12) |
|
|
((mcu_rev & CS42L43_FW_MINOR_REV_MASK) << 4) |
|
|
((mcu_rev & CS42L43_FW_SUBMINOR_REV_MASK) >> 8);
|
|
|
|
/*
|
|
* The firmware has two revision numbers both of them being at the ROM
|
|
* revision indicates no patch has been applied.
|
|
*/
|
|
patched = mcu_rev != CS42L43_MCU_ROM_REV || bios_rev != CS42L43_MCU_ROM_BIOS_REV;
|
|
/*
|
|
* Later versions of the firmwware require the driver to access some
|
|
* features through a set of shadow registers.
|
|
*/
|
|
shadow = mcu_rev >= CS42L43_MCU_SHADOW_REGS_REQUIRED_REV;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_BOOT_CONTROL, &secure_cfg);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read security settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
cs42l43->hw_lock = secure_cfg & CS42L43_LOCK_HW_STS_MASK;
|
|
|
|
if (!patched && cs42l43->hw_lock) {
|
|
dev_err(cs42l43->dev, "Unpatched secure device\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
dev_dbg(cs42l43->dev, "Firmware(0x%x, 0x%x) in boot stage %d\n",
|
|
mcu_rev, bios_rev, boot_status);
|
|
|
|
switch (boot_status) {
|
|
case CS42L43_MCU_BOOT_STAGE2:
|
|
if (!patched) {
|
|
ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
|
|
"cs42l43.bin", cs42l43->dev,
|
|
GFP_KERNEL, cs42l43,
|
|
cs42l43_mcu_load_firmware);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to request firmware: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
wait_for_completion(&cs42l43->firmware_download);
|
|
|
|
if (cs42l43->firmware_error)
|
|
return cs42l43->firmware_error;
|
|
|
|
return -EAGAIN;
|
|
} else {
|
|
return cs42l43_mcu_stage_2_3(cs42l43, shadow);
|
|
}
|
|
case CS42L43_MCU_BOOT_STAGE3:
|
|
if (patched) {
|
|
ret = cs42l43_mcu_is_hw_compatible(cs42l43, mcu_rev, bios_rev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return cs42l43_mcu_disable(cs42l43);
|
|
} else {
|
|
return cs42l43_mcu_stage_3_2(cs42l43);
|
|
}
|
|
case CS42L43_MCU_BOOT_STAGE4:
|
|
return 0;
|
|
default:
|
|
dev_err(cs42l43->dev, "Invalid boot status: %d\n", boot_status);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update the firmware running on the device.
|
|
*/
|
|
static int cs42l43_mcu_update(struct cs42l43 *cs42l43)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CS42L43_MCU_UPDATE_RETRIES; i++) {
|
|
ret = cs42l43_mcu_update_step(cs42l43);
|
|
if (ret != -EAGAIN)
|
|
return ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
dev_err(cs42l43->dev, "Failed retrying update\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int cs42l43_irq_config(struct cs42l43 *cs42l43)
|
|
{
|
|
struct irq_data *irq_data;
|
|
unsigned long irq_flags;
|
|
int ret;
|
|
|
|
if (cs42l43->sdw)
|
|
cs42l43->irq = cs42l43->sdw->irq;
|
|
|
|
cs42l43->irq_chip = cs42l43_irq_chip;
|
|
cs42l43->irq_chip.irq_drv_data = cs42l43;
|
|
|
|
irq_data = irq_get_irq_data(cs42l43->irq);
|
|
if (!irq_data) {
|
|
dev_err(cs42l43->dev, "Invalid IRQ: %d\n", cs42l43->irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq_flags = irqd_get_trigger_type(irq_data);
|
|
switch (irq_flags) {
|
|
case IRQF_TRIGGER_LOW:
|
|
case IRQF_TRIGGER_HIGH:
|
|
case IRQF_TRIGGER_RISING:
|
|
case IRQF_TRIGGER_FALLING:
|
|
break;
|
|
case IRQ_TYPE_NONE:
|
|
default:
|
|
irq_flags = IRQF_TRIGGER_LOW;
|
|
break;
|
|
}
|
|
|
|
irq_flags |= IRQF_ONESHOT;
|
|
|
|
ret = devm_regmap_add_irq_chip(cs42l43->dev, cs42l43->regmap,
|
|
cs42l43->irq, irq_flags, 0,
|
|
&cs42l43->irq_chip, &cs42l43->irq_data);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to add IRQ chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(cs42l43->dev, "Configured IRQ %d with flags 0x%lx\n",
|
|
cs42l43->irq, irq_flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cs42l43_boot_work(struct work_struct *work)
|
|
{
|
|
struct cs42l43 *cs42l43 = container_of(work, struct cs42l43, boot_work);
|
|
unsigned int devid, revid, otp;
|
|
int ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_DEVID, &devid);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read devid: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
switch (devid) {
|
|
case CS42L43_DEVID_VAL:
|
|
break;
|
|
default:
|
|
dev_err(cs42l43->dev, "Unrecognised devid: 0x%06x\n", devid);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_REVID, &revid);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read rev: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_OTP_REVISION_ID, &otp);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to read otp rev: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(cs42l43->dev,
|
|
"devid: 0x%06x, rev: 0x%02x, otp: 0x%02x\n", devid, revid, otp);
|
|
|
|
ret = cs42l43_mcu_update(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_register_patch(cs42l43->regmap, cs42l43_reva_patch,
|
|
ARRAY_SIZE(cs42l43_reva_patch));
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to apply register patch: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = cs42l43_irq_config(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_mfd_add_devices(cs42l43->dev, PLATFORM_DEVID_NONE,
|
|
cs42l43_devs, ARRAY_SIZE(cs42l43_devs),
|
|
NULL, 0, NULL);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to add subdevices: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(cs42l43->dev);
|
|
pm_runtime_put_autosuspend(cs42l43->dev);
|
|
|
|
return;
|
|
|
|
err:
|
|
pm_runtime_put_sync(cs42l43->dev);
|
|
cs42l43_dev_remove(cs42l43);
|
|
}
|
|
|
|
static int cs42l43_power_up(struct cs42l43 *cs42l43)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(cs42l43->vdd_p);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable vdd-p: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* vdd-p must be on for 50uS before any other supply */
|
|
usleep_range(CS42L43_VDDP_DELAY_US, 2 * CS42L43_VDDP_DELAY_US);
|
|
|
|
gpiod_set_value_cansleep(cs42l43->reset, 1);
|
|
|
|
ret = regulator_bulk_enable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable core supplies: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
ret = regulator_enable(cs42l43->vdd_d);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to enable vdd-d: %d\n", ret);
|
|
goto err_core_supplies;
|
|
}
|
|
|
|
usleep_range(CS42L43_VDDD_DELAY_US, 2 * CS42L43_VDDD_DELAY_US);
|
|
|
|
return 0;
|
|
|
|
err_core_supplies:
|
|
regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
err_reset:
|
|
gpiod_set_value_cansleep(cs42l43->reset, 0);
|
|
regulator_disable(cs42l43->vdd_p);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cs42l43_power_down(struct cs42l43 *cs42l43)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_disable(cs42l43->vdd_d);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable vdd-d: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_disable(CS42L43_N_SUPPLIES, cs42l43->core_supplies);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable core supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(cs42l43->reset, 0);
|
|
|
|
ret = regulator_disable(cs42l43->vdd_p);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to disable vdd-p: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cs42l43_dev_probe(struct cs42l43 *cs42l43)
|
|
{
|
|
int i, ret;
|
|
|
|
dev_set_drvdata(cs42l43->dev, cs42l43);
|
|
|
|
mutex_init(&cs42l43->pll_lock);
|
|
init_completion(&cs42l43->device_attach);
|
|
init_completion(&cs42l43->device_detach);
|
|
init_completion(&cs42l43->firmware_download);
|
|
INIT_WORK(&cs42l43->boot_work, cs42l43_boot_work);
|
|
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
cs42l43->reset = devm_gpiod_get_optional(cs42l43->dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(cs42l43->reset))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->reset),
|
|
"Failed to get reset\n");
|
|
|
|
cs42l43->vdd_p = devm_regulator_get(cs42l43->dev, "vdd-p");
|
|
if (IS_ERR(cs42l43->vdd_p))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->vdd_p),
|
|
"Failed to get vdd-p\n");
|
|
|
|
cs42l43->vdd_d = devm_regulator_get(cs42l43->dev, "vdd-d");
|
|
if (IS_ERR(cs42l43->vdd_d))
|
|
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->vdd_d),
|
|
"Failed to get vdd-d\n");
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(cs42l43_core_supplies) != CS42L43_N_SUPPLIES);
|
|
|
|
for (i = 0; i < CS42L43_N_SUPPLIES; i++)
|
|
cs42l43->core_supplies[i].supply = cs42l43_core_supplies[i];
|
|
|
|
ret = devm_regulator_bulk_get(cs42l43->dev, CS42L43_N_SUPPLIES,
|
|
cs42l43->core_supplies);
|
|
if (ret)
|
|
return dev_err_probe(cs42l43->dev, ret,
|
|
"Failed to get core supplies\n");
|
|
|
|
ret = cs42l43_power_up(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME_MS);
|
|
pm_runtime_use_autosuspend(cs42l43->dev);
|
|
pm_runtime_set_active(cs42l43->dev);
|
|
/*
|
|
* The device is already powered up, but keep it from suspending until
|
|
* the boot work runs.
|
|
*/
|
|
pm_runtime_get_noresume(cs42l43->dev);
|
|
ret = devm_pm_runtime_enable(cs42l43->dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
queue_work(system_long_wq, &cs42l43->boot_work);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_dev_probe, MFD_CS42L43);
|
|
|
|
void cs42l43_dev_remove(struct cs42l43 *cs42l43)
|
|
{
|
|
cs42l43_power_down(cs42l43);
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(cs42l43_dev_remove, MFD_CS42L43);
|
|
|
|
static int cs42l43_suspend(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/*
|
|
* Don't care about being resumed here, but the driver does want
|
|
* force_resume to always trigger an actual resume, so that register
|
|
* state for the MCU/GPIOs is returned as soon as possible after system
|
|
* resume. force_resume will resume if the reference count is resumed on
|
|
* suspend hence the get_noresume.
|
|
*/
|
|
pm_runtime_get_noresume(dev);
|
|
|
|
ret = pm_runtime_force_suspend(dev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to force suspend: %d\n", ret);
|
|
pm_runtime_put_noidle(dev);
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_put_noidle(dev);
|
|
|
|
ret = cs42l43_power_down(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_resume(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = cs42l43_power_up(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pm_runtime_force_resume(dev);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to force resume: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_runtime_suspend(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* Whilst the driver doesn't power the chip down here, going into runtime
|
|
* suspend lets the SoundWire bus power down, which means the driver
|
|
* can't communicate with the device any more.
|
|
*/
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cs42l43_runtime_resume(struct device *dev)
|
|
{
|
|
struct cs42l43 *cs42l43 = dev_get_drvdata(dev);
|
|
unsigned int reset_canary;
|
|
int ret;
|
|
|
|
ret = cs42l43_wait_for_attach(cs42l43);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(cs42l43->regmap, CS42L43_RELID, &reset_canary);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to check reset canary: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
if (!reset_canary) {
|
|
/*
|
|
* If the canary has cleared the chip has reset, re-handle the
|
|
* MCU and mark the cache as dirty to indicate the chip reset.
|
|
*/
|
|
ret = cs42l43_mcu_update(cs42l43);
|
|
if (ret)
|
|
goto err;
|
|
|
|
regcache_mark_dirty(cs42l43->regmap);
|
|
}
|
|
|
|
ret = regcache_sync(cs42l43->regmap);
|
|
if (ret) {
|
|
dev_err(cs42l43->dev, "Failed to restore register cache: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
regcache_cache_only(cs42l43->regmap, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_NS_GPL_DEV_PM_OPS(cs42l43_pm_ops, MFD_CS42L43) = {
|
|
SYSTEM_SLEEP_PM_OPS(cs42l43_suspend, cs42l43_resume)
|
|
RUNTIME_PM_OPS(cs42l43_runtime_suspend, cs42l43_runtime_resume, NULL)
|
|
};
|
|
|
|
MODULE_DESCRIPTION("CS42L43 Core Driver");
|
|
MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE("cs42l43.bin");
|