mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 08:31:55 +00:00
29bb805475
The A10s has only a subset of the A10 gates. Now that the clock driver has support for this gates set, switch to it in the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar>
332 lines
7.4 KiB
Plaintext
332 lines
7.4 KiB
Plaintext
/*
|
|
* Copyright 2013 Maxime Ripard
|
|
*
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x20000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
/*
|
|
* This is a dummy clock, to be used as placeholder on
|
|
* other mux clocks when a specific parent clock is not
|
|
* yet implemented. It should be dropped when the driver
|
|
* is complete.
|
|
*/
|
|
dummy: dummy {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc24M: osc24M@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
osc32k: osc32k {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
pll1: pll1@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
/* dummy is 200M */
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
|
|
};
|
|
|
|
axi: axi@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-axi-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&cpu>;
|
|
};
|
|
|
|
axi_gates: axi_gates@01c2005c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-axi-gates-clk";
|
|
reg = <0x01c2005c 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "axi_dram";
|
|
};
|
|
|
|
ahb: ahb@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&axi>;
|
|
};
|
|
|
|
ahb_gates: ahb_gates@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
|
|
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
|
|
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
|
|
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
|
|
"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
|
|
"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
|
|
"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
|
|
};
|
|
|
|
apb0: apb0@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb>;
|
|
};
|
|
|
|
apb0_gates: apb0_gates@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
|
|
"apb0_ir", "apb0_keypad";
|
|
};
|
|
|
|
/* dummy is pll62 */
|
|
apb1_mux: apb1_mux@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-apb1-mux-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc24M>, <&dummy>, <&osc32k>;
|
|
};
|
|
|
|
apb1: apb1@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&apb1_mux>;
|
|
};
|
|
|
|
apb1_gates: apb1_gates@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-output-names = "apb1_i2c0", "apb1_i2c1",
|
|
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
|
|
"apb1_uart2", "apb1_uart3";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
emac: ethernet@01c0b000 {
|
|
compatible = "allwinner,sun4i-emac";
|
|
reg = <0x01c0b000 0x1000>;
|
|
interrupts = <55>;
|
|
clocks = <&ahb_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@01c0b080 {
|
|
compatible = "allwinner,sun4i-mdio";
|
|
reg = <0x01c0b080 0x14>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@01c20400 {
|
|
compatible = "allwinner,sun4i-ic";
|
|
reg = <0x01c20400 0x400>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun5i-a10s-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <28>;
|
|
clocks = <&apb0_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
allwinner,pins = "PB19", "PB20";
|
|
allwinner,function = "uart0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart2_pins_a: uart2@0 {
|
|
allwinner,pins = "PC18", "PC19";
|
|
allwinner,function = "uart2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart3_pins_a: uart3@0 {
|
|
allwinner,pins = "PG9", "PG10";
|
|
allwinner,function = "uart3";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
emac_pins_a: emac0@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA9", "PA10",
|
|
"PA11", "PA12", "PA13", "PA14",
|
|
"PA15", "PA16";
|
|
allwinner,function = "emac";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
allwinner,pins = "PB0", "PB1";
|
|
allwinner,function = "i2c0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
allwinner,pins = "PB15", "PB16";
|
|
allwinner,function = "i2c1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
allwinner,pins = "PB17", "PB18";
|
|
allwinner,function = "i2c2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-timer";
|
|
reg = <0x01c20c00 0x90>;
|
|
interrupts = <22>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt: watchdog@01c20c90 {
|
|
compatible = "allwinner,sun4i-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <1>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <2>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <3>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <7>;
|
|
clocks = <&apb1_gates 0>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <8>;
|
|
clocks = <&apb1_gates 1>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun4i-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <9>;
|
|
clocks = <&apb1_gates 2>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|