linux/drivers/phy/samsung/phy-samsung-ufs.c
Chanho Park 4e123efa45 phy: samsung-ufs: ufs: change phy on/off control
The sequence of controlling ufs phy block should be below:

1) Power On
 - Turn off pmu isolation
 - Clock enable
2) Power Off
 - Clock disable
 - Turn on pmu isolation

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220706020255.151177-3-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-08 10:38:59 +05:30

330 lines
8.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* UFS PHY driver for Samsung SoC
*
* Copyright (C) 2020 Samsung Electronics Co., Ltd.
* Author: Seungwon Jeon <essuuj@gmail.com>
* Author: Alim Akhtar <alim.akhtar@samsung.com>
*
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "phy-samsung-ufs.h"
#define for_each_phy_lane(phy, i) \
for (i = 0; i < (phy)->lane_cnt; i++)
#define for_each_phy_cfg(cfg) \
for (; (cfg)->id; (cfg)++)
#define PHY_DEF_LANE_CNT 1
static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
const struct samsung_ufs_phy_cfg *cfg,
u8 lane)
{
enum {LANE_0, LANE_1}; /* lane index */
switch (lane) {
case LANE_0:
writel(cfg->val, (phy)->reg_pma + cfg->off_0);
break;
case LANE_1:
if (cfg->id == PHY_TRSV_BLK)
writel(cfg->val, (phy)->reg_pma + cfg->off_1);
break;
}
}
static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
{
struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
const unsigned int timeout_us = 100000;
const unsigned int sleep_us = 10;
u32 val;
int err;
err = readl_poll_timeout(
ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
if (err) {
dev_err(ufs_phy->dev,
"failed to get phy pll lock acquisition %d\n", err);
goto out;
}
err = readl_poll_timeout(
ufs_phy->reg_pma +
PHY_APB_ADDR(ufs_phy->drvdata->cdr_lock_status_offset),
val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
if (err)
dev_err(ufs_phy->dev,
"failed to get phy cdr lock acquisition %d\n", err);
out:
return err;
}
static int samsung_ufs_phy_calibrate(struct phy *phy)
{
struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
const struct samsung_ufs_phy_cfg * const *cfgs = ufs_phy->cfgs;
const struct samsung_ufs_phy_cfg *cfg;
int err = 0;
int i;
if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state);
return -EINVAL;
}
cfg = cfgs[ufs_phy->ufs_phy_state];
if (!cfg)
goto out;
for_each_phy_cfg(cfg) {
for_each_phy_lane(ufs_phy, i) {
samsung_ufs_phy_config(ufs_phy, cfg, i);
}
}
if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
err = samsung_ufs_phy_wait_for_lock_acq(phy);
/**
* In Samsung ufshci, PHY need to be calibrated at different
* stages / state mainly before Linkstartup, after Linkstartup,
* before power mode change and after power mode change.
* Below state machine to make sure to calibrate PHY in each
* state. Here after configuring PHY in a given state, will
* change the state to next state so that next state phy
* calibration value can be programed
*/
out:
switch (ufs_phy->ufs_phy_state) {
case CFG_PRE_INIT:
ufs_phy->ufs_phy_state = CFG_POST_INIT;
break;
case CFG_POST_INIT:
ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
break;
case CFG_PRE_PWR_HS:
ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
break;
case CFG_POST_PWR_HS:
/* Change back to INIT state */
ufs_phy->ufs_phy_state = CFG_PRE_INIT;
break;
default:
dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
}
return err;
}
static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
{
int i;
const struct samsung_ufs_phy_drvdata *drvdata = phy->drvdata;
int num_clks = drvdata->num_clks;
phy->clks = devm_kcalloc(phy->dev, num_clks, sizeof(*phy->clks),
GFP_KERNEL);
if (!phy->clks)
return -ENOMEM;
for (i = 0; i < num_clks; i++)
phy->clks[i].id = drvdata->clk_list[i];
return devm_clk_bulk_get(phy->dev, num_clks, phy->clks);
}
static int samsung_ufs_phy_init(struct phy *phy)
{
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
ss_phy->lane_cnt = phy->attrs.bus_width;
ss_phy->ufs_phy_state = CFG_PRE_INIT;
return 0;
}
static int samsung_ufs_phy_power_on(struct phy *phy)
{
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
int ret;
samsung_ufs_phy_ctrl_isol(ss_phy, false);
ret = clk_bulk_prepare_enable(ss_phy->drvdata->num_clks, ss_phy->clks);
if (ret) {
dev_err(ss_phy->dev, "failed to enable ufs phy clocks\n");
return ret;
}
if (ss_phy->ufs_phy_state == CFG_PRE_INIT) {
ret = samsung_ufs_phy_calibrate(phy);
if (ret)
dev_err(ss_phy->dev, "ufs phy calibration failed\n");
}
return ret;
}
static int samsung_ufs_phy_power_off(struct phy *phy)
{
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
clk_bulk_disable_unprepare(ss_phy->drvdata->num_clks, ss_phy->clks);
samsung_ufs_phy_ctrl_isol(ss_phy, true);
return 0;
}
static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
enum phy_mode mode, int submode)
{
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy);
ss_phy->mode = PHY_MODE_INVALID;
if (mode > 0)
ss_phy->mode = mode;
return 0;
}
static int samsung_ufs_phy_exit(struct phy *phy)
{
struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
ss_phy->ufs_phy_state = CFG_TAG_MAX;
return 0;
}
static const struct phy_ops samsung_ufs_phy_ops = {
.init = samsung_ufs_phy_init,
.exit = samsung_ufs_phy_exit,
.power_on = samsung_ufs_phy_power_on,
.power_off = samsung_ufs_phy_power_off,
.calibrate = samsung_ufs_phy_calibrate,
.set_mode = samsung_ufs_phy_set_mode,
.owner = THIS_MODULE,
};
static const struct of_device_id samsung_ufs_phy_match[];
static int samsung_ufs_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct samsung_ufs_phy *phy;
struct phy *gen_phy;
struct phy_provider *phy_provider;
const struct samsung_ufs_phy_drvdata *drvdata;
u32 isol_offset;
int err = 0;
match = of_match_node(samsung_ufs_phy_match, dev->of_node);
if (!match) {
err = -EINVAL;
dev_err(dev, "failed to get match_node\n");
goto out;
}
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy) {
err = -ENOMEM;
goto out;
}
phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma");
if (IS_ERR(phy->reg_pma)) {
err = PTR_ERR(phy->reg_pma);
goto out;
}
phy->reg_pmu = syscon_regmap_lookup_by_phandle(
dev->of_node, "samsung,pmu-syscon");
if (IS_ERR(phy->reg_pmu)) {
err = PTR_ERR(phy->reg_pmu);
dev_err(dev, "failed syscon remap for pmu\n");
goto out;
}
gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
if (IS_ERR(gen_phy)) {
err = PTR_ERR(gen_phy);
dev_err(dev, "failed to create PHY for ufs-phy\n");
goto out;
}
drvdata = match->data;
phy->dev = dev;
phy->drvdata = drvdata;
phy->cfgs = drvdata->cfgs;
memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol));
if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1,
&isol_offset))
phy->isol.offset = isol_offset;
phy->lane_cnt = PHY_DEF_LANE_CNT;
err = samsung_ufs_phy_clks_init(phy);
if (err) {
dev_err(dev, "failed to get phy clocks\n");
goto out;
}
phy_set_drvdata(gen_phy, phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
err = PTR_ERR(phy_provider);
dev_err(dev, "failed to register phy-provider\n");
goto out;
}
out:
return err;
}
static const struct of_device_id samsung_ufs_phy_match[] = {
{
.compatible = "samsung,exynos7-ufs-phy",
.data = &exynos7_ufs_phy,
}, {
.compatible = "samsung,exynosautov9-ufs-phy",
.data = &exynosautov9_ufs_phy,
}, {
.compatible = "tesla,fsd-ufs-phy",
.data = &fsd_ufs_phy,
},
{},
};
MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
static struct platform_driver samsung_ufs_phy_driver = {
.probe = samsung_ufs_phy_probe,
.driver = {
.name = "samsung-ufs-phy",
.of_match_table = samsung_ufs_phy_match,
},
};
module_platform_driver(samsung_ufs_phy_driver);
MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
MODULE_LICENSE("GPL v2");