Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-21 18:42:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
f692f7766f
linux/drivers/tty/serial
History
Bartlomiej Zolnierkiewicz f692f7766f tty: remove redundant 'default n' from Kconfig-s 
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16 15:21:33 +02:00
..
8250 tty: fix up a few remaining files without SPDX identifiers 2019-04-04 18:48:43 +02:00
cpm_uart tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
jsm tty: add SPDX identifiers to Kconfig and Makefiles 2019-04-04 18:48:43 +02:00
21285.c
altera_jtaguart.c
altera_uart.c serial: altera: set RRDY flag also without irq 2018-02-28 13:30:09 +01:00
amba-pl010.c
amba-pl011.c serial: set suppress_bind_attrs flag only if builtin 2018-11-09 09:07:17 -08:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c serial: ar933x_uart: Fix build failure with disabled console 2019-03-19 15:37:44 +01:00
arc_uart.c serial: arc_uart: Fix out-of-bounds access through DT alias 2018-02-28 15:29:59 +01:00
atmel_serial.c tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped 2019-03-28 00:27:48 +09:00
atmel_serial.h tty/serial: atmel: add ISO7816 support 2018-10-02 13:38:55 -07:00
bcm63xx_uart.c
clps711x.c serial: clps711x: Remove board support 2019-01-08 16:55:18 +01:00
digicolor-usart.c
dz.c
dz.h
earlycon-arm-semihost.c
earlycon-riscv-sbi.c tty/serial: use uart_console_write in the RISC-V SBL early console 2019-01-23 15:41:50 -08:00
earlycon.c earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon 2018-05-14 13:41:05 +02:00
efm32-uart.c
fsl_lpuart.c serial: fsl_lpuart: DMA support for 32-bit variant 2019-01-30 09:31:30 +01:00
icom.c
icom.h
ifx6x60.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
ifx6x60.h
imx.c serial: imx: fix error handling in console_setup 2018-11-27 09:56:20 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig tty: remove redundant 'default n' from Kconfig-s 2019-04-16 15:21:33 +02:00
kgdb_nmi.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
kgdboc.c Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc 2019-03-28 00:27:48 +09:00
lantiq.c serial: lantiq: Do not swap register read/writes 2019-01-08 16:53:36 +01:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix missing console boot messages 2019-01-18 11:23:00 +01:00
Makefile serial: Add Tegra Combined UART driver 2019-01-30 09:31:31 +01:00
max310x.c serial: max310x: Fix to avoid potential NULL pointer dereference 2019-03-19 15:37:43 +01:00
max3100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mcf.c
men_z135_uart.c
meson_uart.c tty: serial: meson: if no alias specified use an available id 2019-01-18 11:22:22 +01:00
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown 2019-01-31 19:34:10 +01:00
mpsc.c
msm_serial.c tty: serial: msm_serial: Remove __init from msm_console_setup() 2019-02-19 13:42:08 +01:00
mux.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mvebu-uart.c serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference 2019-03-19 15:37:43 +01:00
mxs-auart.c tty: mxs-auart: fix a potential NULL pointer dereference 2019-03-19 15:37:43 +01:00
netx-serial.c
omap-serial.c tty: omap-serial: Fix initial on-boot RTS GPIO level 2018-01-09 16:45:17 +01:00
owl-uart.c
pch_uart.c PCI: Move Rohm Vendor ID to generic list 2019-02-01 17:24:52 -06:00
pic32_uart.c serial: set suppress_bind_attrs flag only if builtin 2018-11-09 09:07:17 -08:00
pic32_uart.h
pmac_zilog.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
pmac_zilog.h
pnx8xxx_uart.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
pxa.c serial: pxa: Fix an error handling path in 'serial_pxa_probe()' 2018-06-28 21:07:54 +09:00
qcom_geni_serial.c tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup 2019-03-19 15:37:44 +01:00
rda-uart.c tty: serial: Add RDA8810PL UART driver 2018-12-31 13:10:01 -08:00
rp2.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
sa1100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
samsung.c tty: serial: samsung: Enable baud clock during initialisation 2019-02-19 13:42:08 +01:00
samsung.h
sb1250-duart.c
sc16is7xx.c Merge 5.1-rc3 into tty-next 2019-04-01 07:40:47 +02:00
sccnxp.c serial: sccnxp: Allow to use non-standard baud rates 2018-12-20 16:26:59 +01:00
serial_core.c tty: serial: remove redundant likely annotation 2019-02-19 13:42:07 +01:00
serial_ks8695.c
serial_mctrl_gpio.c gpiolib: Pass array info to get/set array functions 2018-09-13 11:16:54 +02:00
serial_mctrl_gpio.h
serial_txx9.c
serial-tegra.c serial: tegra: fix some spelling mistakes 2018-11-09 08:58:18 -08:00
sh-sci.c serial: sh-sci: Fix setting SCSCR_TIE while transferring data 2019-03-19 15:37:44 +01:00
sh-sci.h serial: sh-sci: Support for HSCIF RX sampling point adjustment 2018-04-23 10:08:18 +02:00
sirfsoc_uart.c serial: sirf: Fix out-of-bounds access through DT alias 2018-02-28 15:30:00 +01:00
sirfsoc_uart.h
sn_console.c tty: fix up a few remaining files without SPDX identifiers 2019-04-04 18:48:43 +02:00
sprd_serial.c serial: sprd: Fix a copy-paste err in sprd_request_dma() 2019-04-16 15:21:33 +02:00
st-asc.c tty: serial: simplify getting .drvdata 2018-04-22 17:29:43 +02:00
stm32-usart.c serial: stm32: fix initialization of RS485 mode 2018-03-15 17:39:43 +01:00
stm32-usart.h serial: stm32: add support for RS485 hardware control mode 2018-03-14 13:35:37 +01:00
suncore.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
sunhv.c
sunsab.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sunsab.h
sunsu.c TTY/Serial driver patches for 4.21-rc1 2018-12-28 20:33:54 -08:00
sunzilog.c
sunzilog.h
tegra-tcu.c serial: Add Tegra Combined UART driver 2019-01-30 09:31:31 +01:00
timbuart.c
timbuart.h
uartlite.c serial-uartlite: fix null pointer dereference on pointer port 2018-11-27 09:08:15 +01:00
ucc_uart.c
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c tty: xilinx_uartps: Correct return value in probe 2019-03-01 18:07:34 +01:00
zs.c
zs.h