Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-04 18:13:04 +00:00
Code Issues Packages Projects Releases Wiki Activity
f519f78c7e
linux/drivers/input/misc/drv2667.c
Andrzej Pietrasiewicz d69f0a43c6 Input: use input_device_enabled() 
Use the newly added helper in relevant input drivers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-02 22:10:33 -08:00

491 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* DRV2667 haptics driver family
*
* Author: Dan Murphy <dmurphy@ti.com>
*
* Copyright: (C) 2014 Texas Instruments, Inc.
*/
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
/* Contol registers */
#define DRV2667_STATUS 0x00
#define DRV2667_CTRL_1 0x01
#define DRV2667_CTRL_2 0x02
/* Waveform sequencer */
#define DRV2667_WV_SEQ_0 0x03
#define DRV2667_WV_SEQ_1 0x04
#define DRV2667_WV_SEQ_2 0x05
#define DRV2667_WV_SEQ_3 0x06
#define DRV2667_WV_SEQ_4 0x07
#define DRV2667_WV_SEQ_5 0x08
#define DRV2667_WV_SEQ_6 0x09
#define DRV2667_WV_SEQ_7 0x0A
#define DRV2667_FIFO 0x0B
#define DRV2667_PAGE 0xFF
#define DRV2667_MAX_REG DRV2667_PAGE
#define DRV2667_PAGE_0 0x00
#define DRV2667_PAGE_1 0x01
#define DRV2667_PAGE_2 0x02
#define DRV2667_PAGE_3 0x03
#define DRV2667_PAGE_4 0x04
#define DRV2667_PAGE_5 0x05
#define DRV2667_PAGE_6 0x06
#define DRV2667_PAGE_7 0x07
#define DRV2667_PAGE_8 0x08
/* RAM fields */
#define DRV2667_RAM_HDR_SZ 0x0
/* RAM Header addresses */
#define DRV2667_RAM_START_HI 0x01
#define DRV2667_RAM_START_LO 0x02
#define DRV2667_RAM_STOP_HI 0x03
#define DRV2667_RAM_STOP_LO 0x04
#define DRV2667_RAM_REPEAT_CT 0x05
/* RAM data addresses */
#define DRV2667_RAM_AMP 0x06
#define DRV2667_RAM_FREQ 0x07
#define DRV2667_RAM_DURATION 0x08
#define DRV2667_RAM_ENVELOPE 0x09
/* Control 1 Register */
#define DRV2667_25_VPP_GAIN 0x00
#define DRV2667_50_VPP_GAIN 0x01
#define DRV2667_75_VPP_GAIN 0x02
#define DRV2667_100_VPP_GAIN 0x03
#define DRV2667_DIGITAL_IN 0xfc
#define DRV2667_ANALOG_IN (1 << 2)
/* Control 2 Register */
#define DRV2667_GO (1 << 0)
#define DRV2667_STANDBY (1 << 6)
#define DRV2667_DEV_RST (1 << 7)
/* RAM Envelope settings */
#define DRV2667_NO_ENV 0x00
#define DRV2667_32_MS_ENV 0x01
#define DRV2667_64_MS_ENV 0x02
#define DRV2667_96_MS_ENV 0x03
#define DRV2667_128_MS_ENV 0x04
#define DRV2667_160_MS_ENV 0x05
#define DRV2667_192_MS_ENV 0x06
#define DRV2667_224_MS_ENV 0x07
#define DRV2667_256_MS_ENV 0x08
#define DRV2667_512_MS_ENV 0x09
#define DRV2667_768_MS_ENV 0x0a
#define DRV2667_1024_MS_ENV 0x0b
#define DRV2667_1280_MS_ENV 0x0c
#define DRV2667_1536_MS_ENV 0x0d
#define DRV2667_1792_MS_ENV 0x0e
#define DRV2667_2048_MS_ENV 0x0f
/**
* struct drv2667_data -
* @input_dev: Pointer to the input device
* @client: Pointer to the I2C client
* @regmap: Register map of the device
* @work: Work item used to off load the enable/disable of the vibration
* @regulator: Pointer to the regulator for the IC
* @page: Page number
* @magnitude: Magnitude of the vibration event
* @frequency: Frequency of the vibration event
**/
struct drv2667_data {
struct input_dev *input_dev;
struct i2c_client *client;
struct regmap *regmap;
struct work_struct work;
struct regulator *regulator;
u32 page;
u32 magnitude;
u32 frequency;
};
static const struct reg_default drv2667_reg_defs[] = {
{ DRV2667_STATUS, 0x02 },
{ DRV2667_CTRL_1, 0x28 },
{ DRV2667_CTRL_2, 0x40 },
{ DRV2667_WV_SEQ_0, 0x00 },
{ DRV2667_WV_SEQ_1, 0x00 },
{ DRV2667_WV_SEQ_2, 0x00 },
{ DRV2667_WV_SEQ_3, 0x00 },
{ DRV2667_WV_SEQ_4, 0x00 },
{ DRV2667_WV_SEQ_5, 0x00 },
{ DRV2667_WV_SEQ_6, 0x00 },
{ DRV2667_WV_SEQ_7, 0x00 },
{ DRV2667_FIFO, 0x00 },
{ DRV2667_PAGE, 0x00 },
};
static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
{
unsigned int read_buf;
int freq;
int error;
/* Per the data sheet:
* Sinusoid Frequency (Hz) = 7.8125 x Frequency
*/
freq = (haptics->frequency * 1000) / 78125;
if (freq <= 0) {
dev_err(&haptics->client->dev,
"ERROR: Frequency calculated to %i\n", freq);
return -EINVAL;
}
error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf);
if (error) {
dev_err(&haptics->client->dev,
"Failed to read the page number: %d\n", error);
return -EIO;
}
if (read_buf == DRV2667_PAGE_0 ||
haptics->page != read_buf) {
error = regmap_write(haptics->regmap,
DRV2667_PAGE, haptics->page);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the page: %d\n", error);
return -EIO;
}
}
error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ, freq);
if (error)
dev_err(&haptics->client->dev,
"Failed to set the frequency: %d\n", error);
/* Reset back to original page */
if (read_buf == DRV2667_PAGE_0 ||
haptics->page != read_buf) {
error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the page: %d\n", error);
return -EIO;
}
}
return error;
}
static void drv2667_worker(struct work_struct *work)
{
struct drv2667_data *haptics = container_of(work, struct drv2667_data, work);
int error;
if (haptics->magnitude) {
error = regmap_write(haptics->regmap,
DRV2667_PAGE, haptics->page);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the page: %d\n", error);
return;
}
error = regmap_write(haptics->regmap, DRV2667_RAM_AMP,
haptics->magnitude);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the amplitude: %d\n", error);
return;
}
error = regmap_write(haptics->regmap,
DRV2667_PAGE, DRV2667_PAGE_0);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the page: %d\n", error);
return;
}
error = regmap_write(haptics->regmap,
DRV2667_CTRL_2, DRV2667_GO);
if (error) {
dev_err(&haptics->client->dev,
"Failed to set the GO bit: %d\n", error);
}
} else {
error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
DRV2667_GO, 0);
if (error) {
dev_err(&haptics->client->dev,
"Failed to unset the GO bit: %d\n", error);
}
}
}
static int drv2667_haptics_play(struct input_dev *input, void *data,
struct ff_effect *effect)
{
struct drv2667_data *haptics = input_get_drvdata(input);
if (effect->u.rumble.strong_magnitude > 0)
haptics->magnitude = effect->u.rumble.strong_magnitude;
else if (effect->u.rumble.weak_magnitude > 0)
haptics->magnitude = effect->u.rumble.weak_magnitude;
else
haptics->magnitude = 0;
schedule_work(&haptics->work);
return 0;
}
static void drv2667_close(struct input_dev *input)
{
struct drv2667_data *haptics = input_get_drvdata(input);
int error;
cancel_work_sync(&haptics->work);
error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
DRV2667_STANDBY, DRV2667_STANDBY);
if (error)
dev_err(&haptics->client->dev,
"Failed to enter standby mode: %d\n", error);
}
static const struct reg_sequence drv2667_init_regs[] = {
{ DRV2667_CTRL_2, 0 },
{ DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
{ DRV2667_WV_SEQ_0, 1 },
{ DRV2667_WV_SEQ_1, 0 }
};
static const struct reg_sequence drv2667_page1_init[] = {
{ DRV2667_RAM_HDR_SZ, 0x05 },
{ DRV2667_RAM_START_HI, 0x80 },
{ DRV2667_RAM_START_LO, 0x06 },
{ DRV2667_RAM_STOP_HI, 0x00 },
{ DRV2667_RAM_STOP_LO, 0x09 },
{ DRV2667_RAM_REPEAT_CT, 0 },
{ DRV2667_RAM_DURATION, 0x05 },
{ DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV },
{ DRV2667_RAM_AMP, 0x60 },
};
static int drv2667_init(struct drv2667_data *haptics)
{
int error;
/* Set default haptic frequency to 195Hz on Page 1*/
haptics->frequency = 195;
haptics->page = DRV2667_PAGE_1;
error = regmap_register_patch(haptics->regmap,
drv2667_init_regs,
ARRAY_SIZE(drv2667_init_regs));
if (error) {
dev_err(&haptics->client->dev,
"Failed to write init registers: %d\n",
error);
return error;
}
error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page);
if (error) {
dev_err(&haptics->client->dev, "Failed to set page: %d\n",
error);
goto error_out;
}
error = drv2667_set_waveform_freq(haptics);
if (error)
goto error_page;
error = regmap_register_patch(haptics->regmap,
drv2667_page1_init,
ARRAY_SIZE(drv2667_page1_init));
if (error) {
dev_err(&haptics->client->dev,
"Failed to write page registers: %d\n",
error);
return error;
}
error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
return error;
error_page:
regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
error_out:
return error;
}
static const struct regmap_config drv2667_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = DRV2667_MAX_REG,
.reg_defaults = drv2667_reg_defs,
.num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs),
.cache_type = REGCACHE_NONE,
};
static int drv2667_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct drv2667_data *haptics;
int error;
haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
if (!haptics)
return -ENOMEM;
haptics->regulator = devm_regulator_get(&client->dev, "vbat");
if (IS_ERR(haptics->regulator)) {
error = PTR_ERR(haptics->regulator);
dev_err(&client->dev,
"unable to get regulator, error: %d\n", error);
return error;
}
haptics->input_dev = devm_input_allocate_device(&client->dev);
if (!haptics->input_dev) {
dev_err(&client->dev, "Failed to allocate input device\n");
return -ENOMEM;
}
haptics->input_dev->name = "drv2667:haptics";
haptics->input_dev->dev.parent = client->dev.parent;
haptics->input_dev->close = drv2667_close;
input_set_drvdata(haptics->input_dev, haptics);
input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
error = input_ff_create_memless(haptics->input_dev, NULL,
drv2667_haptics_play);
if (error) {
dev_err(&client->dev, "input_ff_create() failed: %d\n",
error);
return error;
}
INIT_WORK(&haptics->work, drv2667_worker);
haptics->client = client;
i2c_set_clientdata(client, haptics);
haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config);
if (IS_ERR(haptics->regmap)) {
error = PTR_ERR(haptics->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
error = drv2667_init(haptics);
if (error) {
dev_err(&client->dev, "Device init failed: %d\n", error);
return error;
}
error = input_register_device(haptics->input_dev);
if (error) {
dev_err(&client->dev, "couldn't register input device: %d\n",
error);
return error;
}
return 0;
}
static int __maybe_unused drv2667_suspend(struct device *dev)
{
struct drv2667_data *haptics = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&haptics->input_dev->mutex);
if (input_device_enabled(haptics->input_dev)) {
ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
DRV2667_STANDBY, DRV2667_STANDBY);
if (ret) {
dev_err(dev, "Failed to set standby mode\n");
regulator_disable(haptics->regulator);
goto out;
}
ret = regulator_disable(haptics->regulator);
if (ret) {
dev_err(dev, "Failed to disable regulator\n");
regmap_update_bits(haptics->regmap,
DRV2667_CTRL_2,
DRV2667_STANDBY, 0);
}
}
out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
static int __maybe_unused drv2667_resume(struct device *dev)
{
struct drv2667_data *haptics = dev_get_drvdata(dev);
int ret = 0;
mutex_lock(&haptics->input_dev->mutex);
if (input_device_enabled(haptics->input_dev)) {
ret = regulator_enable(haptics->regulator);
if (ret) {
dev_err(dev, "Failed to enable regulator\n");
goto out;
}
ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
DRV2667_STANDBY, 0);
if (ret) {
dev_err(dev, "Failed to unset standby mode\n");
regulator_disable(haptics->regulator);
goto out;
}
}
out:
mutex_unlock(&haptics->input_dev->mutex);
return ret;
}
static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
static const struct i2c_device_id drv2667_id[] = {
{ "drv2667", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, drv2667_id);
#ifdef CONFIG_OF
static const struct of_device_id drv2667_of_match[] = {
{ .compatible = "ti,drv2667", },
{ }
};
MODULE_DEVICE_TABLE(of, drv2667_of_match);
#endif
static struct i2c_driver drv2667_driver = {
.probe = drv2667_probe,
.driver = {
.name = "drv2667-haptics",
.of_match_table = of_match_ptr(drv2667_of_match),
.pm = &drv2667_pm_ops,
},
.id_table = drv2667_id,
};
module_i2c_driver(drv2667_driver);
MODULE_DESCRIPTION("TI DRV2667 haptics driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
Reference in New Issue View Git Blame Copy Permalink