linux/drivers/media/usb/dvb-usb-v2/af9035.h
Oliver Schinagl d67ceb3398 [media] Support for Asus MyCinema U3100Mini Plus
This is initial support for the Asus MyCinema U3100Mini Plus. The driver
in its current form gets detected and loads properly.
Scanning using dvbscan works without problems, Locking onto a channel
using tzap also works fine. Only playback using tzap -r + mplayer was
tested and was fully functional.
It uses the af9035 USB Bridge chip, with an af9033 demodulator. The tuner
used is the FCI FC2580.

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27 15:14:17 -03:00

116 lines
2.9 KiB
C

/*
* Afatech AF9035 DVB USB driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef AF9035_H
#define AF9035_H
#include "dvb_usb.h"
#include "af9033.h"
#include "tua9001.h"
#include "fc0011.h"
#include "mxl5007t.h"
#include "tda18218.h"
#include "fc2580.h"
struct reg_val {
u32 reg;
u8 val;
};
struct reg_val_mask {
u32 reg;
u8 val;
u8 mask;
};
struct usb_req {
u8 cmd;
u8 mbox;
u8 wlen;
u8 *wbuf;
u8 rlen;
u8 *rbuf;
};
struct state {
u8 seq; /* packet sequence number */
bool dual_mode;
struct af9033_config af9033_config[2];
};
u32 clock_lut[] = {
20480000, /* FPGA */
16384000, /* 16.38 MHz */
20480000, /* 20.48 MHz */
36000000, /* 36.00 MHz */
30000000, /* 30.00 MHz */
26000000, /* 26.00 MHz */
28000000, /* 28.00 MHz */
32000000, /* 32.00 MHz */
34000000, /* 34.00 MHz */
24000000, /* 24.00 MHz */
22000000, /* 22.00 MHz */
12000000, /* 12.00 MHz */
};
u32 clock_lut_it9135[] = {
12000000, /* 12.00 MHz */
20480000, /* 20.48 MHz */
36000000, /* 36.00 MHz */
30000000, /* 30.00 MHz */
26000000, /* 26.00 MHz */
28000000, /* 28.00 MHz */
32000000, /* 32.00 MHz */
34000000, /* 34.00 MHz */
24000000, /* 24.00 MHz */
22000000, /* 22.00 MHz */
};
#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
#define AF9035_FIRMWARE_IT9135 "dvb-usb-it9135-01.fw"
/* EEPROM locations */
#define EEPROM_IR_MODE 0x430d
#define EEPROM_DUAL_MODE 0x4326
#define EEPROM_IR_TYPE 0x4329
#define EEPROM_1_IFFREQ_L 0x432d
#define EEPROM_1_IFFREQ_H 0x432e
#define EEPROM_1_TUNER_ID 0x4331
#define EEPROM_2_IFFREQ_L 0x433d
#define EEPROM_2_IFFREQ_H 0x433e
#define EEPROM_2_TUNER_ID 0x4341
/* USB commands */
#define CMD_MEM_RD 0x00
#define CMD_MEM_WR 0x01
#define CMD_I2C_RD 0x02
#define CMD_I2C_WR 0x03
#define CMD_IR_GET 0x18
#define CMD_FW_DL 0x21
#define CMD_FW_QUERYINFO 0x22
#define CMD_FW_BOOT 0x23
#define CMD_FW_DL_BEGIN 0x24
#define CMD_FW_DL_END 0x25
#define CMD_FW_SCATTER_WR 0x29
#endif