linux/drivers/thermal/intel/intel_pch_thermal.c
Akinobu Mita 97a0a49d55 thermal: intel_pch: switch to use <linux/units.h> helpers
This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:40 -08:00

431 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/* intel_pch_thermal.c - Intel PCH Thermal driver
*
* Copyright (c) 2015, Intel Corporation.
*
* Authors:
* Tushar Dave <tushar.n.dave@intel.com>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/thermal.h>
#include <linux/units.h>
#include <linux/pm.h>
/* Intel PCH thermal Device IDs */
#define PCH_THERMAL_DID_HSW_1 0x9C24 /* Haswell PCH */
#define PCH_THERMAL_DID_HSW_2 0x8C24 /* Haswell PCH */
#define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */
#define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */
#define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */
#define PCH_THERMAL_DID_CNL 0x9Df9 /* CNL PCH */
#define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */
#define PCH_THERMAL_DID_CML_H 0X06F9 /* CML-H PCH */
/* Wildcat Point-LP PCH Thermal registers */
#define WPT_TEMP 0x0000 /* Temperature */
#define WPT_TSC 0x04 /* Thermal Sensor Control */
#define WPT_TSS 0x06 /* Thermal Sensor Status */
#define WPT_TSEL 0x08 /* Thermal Sensor Enable and Lock */
#define WPT_TSREL 0x0A /* Thermal Sensor Report Enable and Lock */
#define WPT_TSMIC 0x0C /* Thermal Sensor SMI Control */
#define WPT_CTT 0x0010 /* Catastrophic Trip Point */
#define WPT_TAHV 0x0014 /* Thermal Alert High Value */
#define WPT_TALV 0x0018 /* Thermal Alert Low Value */
#define WPT_TL 0x00000040 /* Throttle Value */
#define WPT_PHL 0x0060 /* PCH Hot Level */
#define WPT_PHLC 0x62 /* PHL Control */
#define WPT_TAS 0x80 /* Thermal Alert Status */
#define WPT_TSPIEN 0x82 /* PCI Interrupt Event Enables */
#define WPT_TSGPEN 0x84 /* General Purpose Event Enables */
/* Wildcat Point-LP PCH Thermal Register bit definitions */
#define WPT_TEMP_TSR 0x01ff /* Temp TS Reading */
#define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */
#define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */
#define WPT_TSS_GPES 0x08 /* GPE status */
#define WPT_TSEL_ETS 0x01 /* Enable TS */
#define WPT_TSEL_PLDB 0x80 /* TSEL Policy Lock-Down Bit */
#define WPT_TL_TOL 0x000001FF /* T0 Level */
#define WPT_TL_T1L 0x1ff00000 /* T1 Level */
#define WPT_TL_TTEN 0x20000000 /* TT Enable */
static char driver_name[] = "Intel PCH thermal driver";
struct pch_thermal_device {
void __iomem *hw_base;
const struct pch_dev_ops *ops;
struct pci_dev *pdev;
struct thermal_zone_device *tzd;
int crt_trip_id;
unsigned long crt_temp;
int hot_trip_id;
unsigned long hot_temp;
int psv_trip_id;
unsigned long psv_temp;
bool bios_enabled;
};
#ifdef CONFIG_ACPI
/*
* On some platforms, there is a companion ACPI device, which adds
* passive trip temperature using _PSV method. There is no specific
* passive temperature setting in MMIO interface of this PCI device.
*/
static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
int *nr_trips)
{
struct acpi_device *adev;
ptd->psv_trip_id = -1;
adev = ACPI_COMPANION(&ptd->pdev->dev);
if (adev) {
unsigned long long r;
acpi_status status;
status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
&r);
if (ACPI_SUCCESS(status)) {
unsigned long trip_temp;
trip_temp = deci_kelvin_to_millicelsius(r);
if (trip_temp) {
ptd->psv_temp = trip_temp;
ptd->psv_trip_id = *nr_trips;
++(*nr_trips);
}
}
}
}
#else
static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
int *nr_trips)
{
ptd->psv_trip_id = -1;
}
#endif
static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
{
u8 tsel;
u16 trip_temp;
*nr_trips = 0;
/* Check if BIOS has already enabled thermal sensor */
if (WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL)) {
ptd->bios_enabled = true;
goto read_trips;
}
tsel = readb(ptd->hw_base + WPT_TSEL);
/*
* When TSEL's Policy Lock-Down bit is 1, TSEL become RO.
* If so, thermal sensor cannot enable. Bail out.
*/
if (tsel & WPT_TSEL_PLDB) {
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
return -ENODEV;
}
writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
if (!(WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL))) {
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
return -ENODEV;
}
read_trips:
ptd->crt_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_CTT);
trip_temp &= 0x1FF;
if (trip_temp) {
/* Resolution of 1/2 degree C and an offset of -50C */
ptd->crt_temp = trip_temp * 1000 / 2 - 50000;
ptd->crt_trip_id = 0;
++(*nr_trips);
}
ptd->hot_trip_id = -1;
trip_temp = readw(ptd->hw_base + WPT_PHL);
trip_temp &= 0x1FF;
if (trip_temp) {
/* Resolution of 1/2 degree C and an offset of -50C */
ptd->hot_temp = trip_temp * 1000 / 2 - 50000;
ptd->hot_trip_id = *nr_trips;
++(*nr_trips);
}
pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
return 0;
}
static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp)
{
u16 wpt_temp;
wpt_temp = WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP);
/* Resolution of 1/2 degree C and an offset of -50C */
*temp = (wpt_temp * 1000 / 2 - 50000);
return 0;
}
static int pch_wpt_suspend(struct pch_thermal_device *ptd)
{
u8 tsel;
if (ptd->bios_enabled)
return 0;
tsel = readb(ptd->hw_base + WPT_TSEL);
writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL);
return 0;
}
static int pch_wpt_resume(struct pch_thermal_device *ptd)
{
u8 tsel;
if (ptd->bios_enabled)
return 0;
tsel = readb(ptd->hw_base + WPT_TSEL);
writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
return 0;
}
struct pch_dev_ops {
int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips);
int (*get_temp)(struct pch_thermal_device *ptd, int *temp);
int (*suspend)(struct pch_thermal_device *ptd);
int (*resume)(struct pch_thermal_device *ptd);
};
/* dev ops for Wildcat Point */
static const struct pch_dev_ops pch_dev_ops_wpt = {
.hw_init = pch_wpt_init,
.get_temp = pch_wpt_get_temp,
.suspend = pch_wpt_suspend,
.resume = pch_wpt_resume,
};
static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
{
struct pch_thermal_device *ptd = tzd->devdata;
return ptd->ops->get_temp(ptd, temp);
}
static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
enum thermal_trip_type *type)
{
struct pch_thermal_device *ptd = tzd->devdata;
if (ptd->crt_trip_id == trip)
*type = THERMAL_TRIP_CRITICAL;
else if (ptd->hot_trip_id == trip)
*type = THERMAL_TRIP_HOT;
else if (ptd->psv_trip_id == trip)
*type = THERMAL_TRIP_PASSIVE;
else
return -EINVAL;
return 0;
}
static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
{
struct pch_thermal_device *ptd = tzd->devdata;
if (ptd->crt_trip_id == trip)
*temp = ptd->crt_temp;
else if (ptd->hot_trip_id == trip)
*temp = ptd->hot_temp;
else if (ptd->psv_trip_id == trip)
*temp = ptd->psv_temp;
else
return -EINVAL;
return 0;
}
static struct thermal_zone_device_ops tzd_ops = {
.get_temp = pch_thermal_get_temp,
.get_trip_type = pch_get_trip_type,
.get_trip_temp = pch_get_trip_temp,
};
enum board_ids {
board_hsw,
board_wpt,
board_skl,
board_cnl,
board_cml,
};
static const struct board_info {
const char *name;
const struct pch_dev_ops *ops;
} board_info[] = {
[board_hsw] = {
.name = "pch_haswell",
.ops = &pch_dev_ops_wpt,
},
[board_wpt] = {
.name = "pch_wildcat_point",
.ops = &pch_dev_ops_wpt,
},
[board_skl] = {
.name = "pch_skylake",
.ops = &pch_dev_ops_wpt,
},
[board_cnl] = {
.name = "pch_cannonlake",
.ops = &pch_dev_ops_wpt,
},
[board_cml] = {
.name = "pch_cometlake",
.ops = &pch_dev_ops_wpt,
}
};
static int intel_pch_thermal_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
enum board_ids board_id = id->driver_data;
const struct board_info *bi = &board_info[board_id];
struct pch_thermal_device *ptd;
int err;
int nr_trips;
ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
if (!ptd)
return -ENOMEM;
ptd->ops = bi->ops;
pci_set_drvdata(pdev, ptd);
ptd->pdev = pdev;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device\n");
return err;
}
err = pci_request_regions(pdev, driver_name);
if (err) {
dev_err(&pdev->dev, "failed to request pci region\n");
goto error_disable;
}
ptd->hw_base = pci_ioremap_bar(pdev, 0);
if (!ptd->hw_base) {
err = -ENOMEM;
dev_err(&pdev->dev, "failed to map mem base\n");
goto error_release;
}
err = ptd->ops->hw_init(ptd, &nr_trips);
if (err)
goto error_cleanup;
ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
&tzd_ops, NULL, 0, 0);
if (IS_ERR(ptd->tzd)) {
dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
bi->name);
err = PTR_ERR(ptd->tzd);
goto error_cleanup;
}
return 0;
error_cleanup:
iounmap(ptd->hw_base);
error_release:
pci_release_regions(pdev);
error_disable:
pci_disable_device(pdev);
dev_err(&pdev->dev, "pci device failed to probe\n");
return err;
}
static void intel_pch_thermal_remove(struct pci_dev *pdev)
{
struct pch_thermal_device *ptd = pci_get_drvdata(pdev);
thermal_zone_device_unregister(ptd->tzd);
iounmap(ptd->hw_base);
pci_set_drvdata(pdev, NULL);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
static int intel_pch_thermal_suspend(struct device *device)
{
struct pch_thermal_device *ptd = dev_get_drvdata(device);
return ptd->ops->suspend(ptd);
}
static int intel_pch_thermal_resume(struct device *device)
{
struct pch_thermal_device *ptd = dev_get_drvdata(device);
return ptd->ops->resume(ptd);
}
static const struct pci_device_id intel_pch_thermal_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1),
.driver_data = board_hsw, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2),
.driver_data = board_hsw, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT),
.driver_data = board_wpt, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL),
.driver_data = board_skl, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H),
.driver_data = board_skl, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL),
.driver_data = board_cnl, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
.driver_data = board_cnl, },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
.driver_data = board_cml, },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
static const struct dev_pm_ops intel_pch_pm_ops = {
.suspend = intel_pch_thermal_suspend,
.resume = intel_pch_thermal_resume,
};
static struct pci_driver intel_pch_thermal_driver = {
.name = "intel_pch_thermal",
.id_table = intel_pch_thermal_id,
.probe = intel_pch_thermal_probe,
.remove = intel_pch_thermal_remove,
.driver.pm = &intel_pch_pm_ops,
};
module_pci_driver(intel_pch_thermal_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel PCH Thermal driver");