mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
3462100cf3
- Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Remove non-OF mmp clk drivers - Move number of clks from DT headers to drivers * clk-imx: clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz clk: imx: pll14xx: align pdiv with reference manual clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op clk: imx25: make __mx25_clocks_init return void clk: imx25: print silicon revision during init dt-bindings: clocks: imx8mp: make sai4 a dummy clock clk: imx8mp: fix sai4 clock clk: imx: imx8ulp: update SPLL2 type clk: imx: pllv4: Fix SPLL2 MULT range clk: imx: imx8: add audio clock mux driver dt-bindings: clock: fsl,imx8-acm: Add audio clock mux support clk: imx: clk-imx8qxp-lpcg: Convert to devm_platform_ioremap_resource() clk: imx: clk-gpr-mux: Simplify .determine_rate() clk: imx: Add 519.75MHz frequency support for imx9 pll clk: imx93: Add PDM IPG clk dt-bindings: clock: imx93: Add PDM IPG clk * clk-samsung: dt-bindings: clock: samsung: remove define with number of clocks clk: samsung: exynoautov9: do not define number of clocks in bindings clk: samsung: exynos850: do not define number of clocks in bindings clk: samsung: exynos7885: do not define number of clocks in bindings clk: samsung: exynos5433: do not define number of clocks in bindings clk: samsung: exynos5420: do not define number of clocks in bindings clk: samsung: exynos5410: do not define number of clocks in bindings clk: samsung: exynos5260: do not define number of clocks in bindings clk: samsung: exynos5250: do not define number of clocks in bindings clk: samsung: exynos4: do not define number of clocks in bindings clk: samsung: exynos3250: do not define number of clocks in bindings * clk-annotate: clk: qcom: clk-spmi-pmic-div: Annotate struct spmi_pmic_div_clk_cc with __counted_by clk: Annotate struct clk_hw_onecell_data with __counted_by * clk-marvell: clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source clk: mmp: Remove old non-OF clock drivers * clk-lmk: clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks
462 lines
12 KiB
C
462 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cortina Gemini SoC Clock Controller driver
|
|
* Copyright (c) 2017 Linus Walleij <linus.walleij@linaro.org>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "clk-gemini: " fmt
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <dt-bindings/reset/cortina,gemini-reset.h>
|
|
#include <dt-bindings/clock/cortina,gemini-clock.h>
|
|
|
|
/* Globally visible clocks */
|
|
static DEFINE_SPINLOCK(gemini_clk_lock);
|
|
|
|
#define GEMINI_GLOBAL_STATUS 0x04
|
|
#define PLL_OSC_SEL BIT(30)
|
|
#define AHBSPEED_SHIFT (15)
|
|
#define AHBSPEED_MASK 0x07
|
|
#define CPU_AHB_RATIO_SHIFT (18)
|
|
#define CPU_AHB_RATIO_MASK 0x03
|
|
|
|
#define GEMINI_GLOBAL_PLL_CONTROL 0x08
|
|
|
|
#define GEMINI_GLOBAL_SOFT_RESET 0x0c
|
|
|
|
#define GEMINI_GLOBAL_MISC_CONTROL 0x30
|
|
#define PCI_CLK_66MHZ BIT(18)
|
|
|
|
#define GEMINI_GLOBAL_CLOCK_CONTROL 0x34
|
|
#define PCI_CLKRUN_EN BIT(16)
|
|
#define TVC_HALFDIV_SHIFT (24)
|
|
#define TVC_HALFDIV_MASK 0x1f
|
|
#define SECURITY_CLK_SEL BIT(29)
|
|
|
|
#define GEMINI_GLOBAL_PCI_DLL_CONTROL 0x44
|
|
#define PCI_DLL_BYPASS BIT(31)
|
|
#define PCI_DLL_TAP_SEL_MASK 0x1f
|
|
|
|
/**
|
|
* struct gemini_gate_data - Gemini gated clocks
|
|
* @bit_idx: the bit used to gate this clock in the clock register
|
|
* @name: the clock name
|
|
* @parent_name: the name of the parent clock
|
|
* @flags: standard clock framework flags
|
|
*/
|
|
struct gemini_gate_data {
|
|
u8 bit_idx;
|
|
const char *name;
|
|
const char *parent_name;
|
|
unsigned long flags;
|
|
};
|
|
|
|
/**
|
|
* struct clk_gemini_pci - Gemini PCI clock
|
|
* @hw: corresponding clock hardware entry
|
|
* @map: regmap to access the registers
|
|
* @rate: current rate
|
|
*/
|
|
struct clk_gemini_pci {
|
|
struct clk_hw hw;
|
|
struct regmap *map;
|
|
unsigned long rate;
|
|
};
|
|
|
|
/**
|
|
* struct gemini_reset - gemini reset controller
|
|
* @map: regmap to access the containing system controller
|
|
* @rcdev: reset controller device
|
|
*/
|
|
struct gemini_reset {
|
|
struct regmap *map;
|
|
struct reset_controller_dev rcdev;
|
|
};
|
|
|
|
/* Keeps track of all clocks */
|
|
static struct clk_hw_onecell_data *gemini_clk_data;
|
|
|
|
static const struct gemini_gate_data gemini_gates[] = {
|
|
{ 1, "security-gate", "secdiv", 0 },
|
|
{ 2, "gmac0-gate", "ahb", 0 },
|
|
{ 3, "gmac1-gate", "ahb", 0 },
|
|
{ 4, "sata0-gate", "ahb", 0 },
|
|
{ 5, "sata1-gate", "ahb", 0 },
|
|
{ 6, "usb0-gate", "ahb", 0 },
|
|
{ 7, "usb1-gate", "ahb", 0 },
|
|
{ 8, "ide-gate", "ahb", 0 },
|
|
{ 9, "pci-gate", "ahb", 0 },
|
|
/*
|
|
* The DDR controller may never have a driver, but certainly must
|
|
* not be gated off.
|
|
*/
|
|
{ 10, "ddr-gate", "ahb", CLK_IS_CRITICAL },
|
|
/*
|
|
* The flash controller must be on to access NOR flash through the
|
|
* memory map.
|
|
*/
|
|
{ 11, "flash-gate", "ahb", CLK_IGNORE_UNUSED },
|
|
{ 12, "tvc-gate", "ahb", 0 },
|
|
{ 13, "boot-gate", "apb", 0 },
|
|
};
|
|
|
|
#define to_pciclk(_hw) container_of(_hw, struct clk_gemini_pci, hw)
|
|
|
|
#define to_gemini_reset(p) container_of((p), struct gemini_reset, rcdev)
|
|
|
|
static unsigned long gemini_pci_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_gemini_pci *pciclk = to_pciclk(hw);
|
|
u32 val;
|
|
|
|
regmap_read(pciclk->map, GEMINI_GLOBAL_MISC_CONTROL, &val);
|
|
if (val & PCI_CLK_66MHZ)
|
|
return 66000000;
|
|
return 33000000;
|
|
}
|
|
|
|
static long gemini_pci_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
/* We support 33 and 66 MHz */
|
|
if (rate < 48000000)
|
|
return 33000000;
|
|
return 66000000;
|
|
}
|
|
|
|
static int gemini_pci_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_gemini_pci *pciclk = to_pciclk(hw);
|
|
|
|
if (rate == 33000000)
|
|
return regmap_update_bits(pciclk->map,
|
|
GEMINI_GLOBAL_MISC_CONTROL,
|
|
PCI_CLK_66MHZ, 0);
|
|
if (rate == 66000000)
|
|
return regmap_update_bits(pciclk->map,
|
|
GEMINI_GLOBAL_MISC_CONTROL,
|
|
0, PCI_CLK_66MHZ);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int gemini_pci_enable(struct clk_hw *hw)
|
|
{
|
|
struct clk_gemini_pci *pciclk = to_pciclk(hw);
|
|
|
|
regmap_update_bits(pciclk->map, GEMINI_GLOBAL_CLOCK_CONTROL,
|
|
0, PCI_CLKRUN_EN);
|
|
return 0;
|
|
}
|
|
|
|
static void gemini_pci_disable(struct clk_hw *hw)
|
|
{
|
|
struct clk_gemini_pci *pciclk = to_pciclk(hw);
|
|
|
|
regmap_update_bits(pciclk->map, GEMINI_GLOBAL_CLOCK_CONTROL,
|
|
PCI_CLKRUN_EN, 0);
|
|
}
|
|
|
|
static int gemini_pci_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_gemini_pci *pciclk = to_pciclk(hw);
|
|
unsigned int val;
|
|
|
|
regmap_read(pciclk->map, GEMINI_GLOBAL_CLOCK_CONTROL, &val);
|
|
return !!(val & PCI_CLKRUN_EN);
|
|
}
|
|
|
|
static const struct clk_ops gemini_pci_clk_ops = {
|
|
.recalc_rate = gemini_pci_recalc_rate,
|
|
.round_rate = gemini_pci_round_rate,
|
|
.set_rate = gemini_pci_set_rate,
|
|
.enable = gemini_pci_enable,
|
|
.disable = gemini_pci_disable,
|
|
.is_enabled = gemini_pci_is_enabled,
|
|
};
|
|
|
|
static struct clk_hw *gemini_pci_clk_setup(const char *name,
|
|
const char *parent_name,
|
|
struct regmap *map)
|
|
{
|
|
struct clk_gemini_pci *pciclk;
|
|
struct clk_init_data init;
|
|
int ret;
|
|
|
|
pciclk = kzalloc(sizeof(*pciclk), GFP_KERNEL);
|
|
if (!pciclk)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.ops = &gemini_pci_clk_ops;
|
|
init.flags = 0;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
pciclk->map = map;
|
|
pciclk->hw.init = &init;
|
|
|
|
ret = clk_hw_register(NULL, &pciclk->hw);
|
|
if (ret) {
|
|
kfree(pciclk);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return &pciclk->hw;
|
|
}
|
|
|
|
/*
|
|
* This is a self-deasserting reset controller.
|
|
*/
|
|
static int gemini_reset(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct gemini_reset *gr = to_gemini_reset(rcdev);
|
|
|
|
/* Manual says to always set BIT 30 (CPU1) to 1 */
|
|
return regmap_write(gr->map,
|
|
GEMINI_GLOBAL_SOFT_RESET,
|
|
BIT(GEMINI_RESET_CPU1) | BIT(id));
|
|
}
|
|
|
|
static int gemini_reset_assert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int gemini_reset_deassert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int gemini_reset_status(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct gemini_reset *gr = to_gemini_reset(rcdev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & BIT(id));
|
|
}
|
|
|
|
static const struct reset_control_ops gemini_reset_ops = {
|
|
.reset = gemini_reset,
|
|
.assert = gemini_reset_assert,
|
|
.deassert = gemini_reset_deassert,
|
|
.status = gemini_reset_status,
|
|
};
|
|
|
|
static int gemini_clk_probe(struct platform_device *pdev)
|
|
{
|
|
/* Gives the fracions 1x, 1.5x, 1.85x and 2x */
|
|
unsigned int cpu_ahb_mult[4] = { 1, 3, 24, 2 };
|
|
unsigned int cpu_ahb_div[4] = { 1, 2, 13, 1 };
|
|
void __iomem *base;
|
|
struct gemini_reset *gr;
|
|
struct regmap *map;
|
|
struct clk_hw *hw;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
unsigned int mult, div;
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL);
|
|
if (!gr)
|
|
return -ENOMEM;
|
|
|
|
/* Remap the system controller for the exclusive register */
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
map = syscon_node_to_regmap(np);
|
|
if (IS_ERR(map)) {
|
|
dev_err(dev, "no syscon regmap\n");
|
|
return PTR_ERR(map);
|
|
}
|
|
|
|
gr->map = map;
|
|
gr->rcdev.owner = THIS_MODULE;
|
|
gr->rcdev.nr_resets = 32;
|
|
gr->rcdev.ops = &gemini_reset_ops;
|
|
gr->rcdev.of_node = np;
|
|
|
|
ret = devm_reset_controller_register(dev, &gr->rcdev);
|
|
if (ret) {
|
|
dev_err(dev, "could not register reset controller\n");
|
|
return ret;
|
|
}
|
|
|
|
/* RTC clock 32768 Hz */
|
|
hw = clk_hw_register_fixed_rate(NULL, "rtc", NULL, 0, 32768);
|
|
gemini_clk_data->hws[GEMINI_CLK_RTC] = hw;
|
|
|
|
/* CPU clock derived as a fixed ratio from the AHB clock */
|
|
regmap_read(map, GEMINI_GLOBAL_STATUS, &val);
|
|
val >>= CPU_AHB_RATIO_SHIFT;
|
|
val &= CPU_AHB_RATIO_MASK;
|
|
hw = clk_hw_register_fixed_factor(NULL, "cpu", "ahb", 0,
|
|
cpu_ahb_mult[val],
|
|
cpu_ahb_div[val]);
|
|
gemini_clk_data->hws[GEMINI_CLK_CPU] = hw;
|
|
|
|
/* Security clock is 1:1 or 0.75 of APB */
|
|
regmap_read(map, GEMINI_GLOBAL_CLOCK_CONTROL, &val);
|
|
if (val & SECURITY_CLK_SEL) {
|
|
mult = 1;
|
|
div = 1;
|
|
} else {
|
|
mult = 3;
|
|
div = 4;
|
|
}
|
|
hw = clk_hw_register_fixed_factor(NULL, "secdiv", "ahb", 0, mult, div);
|
|
|
|
/*
|
|
* These are the leaf gates, at boot no clocks are gated.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(gemini_gates); i++) {
|
|
const struct gemini_gate_data *gd;
|
|
|
|
gd = &gemini_gates[i];
|
|
gemini_clk_data->hws[GEMINI_CLK_GATES + i] =
|
|
clk_hw_register_gate(NULL, gd->name,
|
|
gd->parent_name,
|
|
gd->flags,
|
|
base + GEMINI_GLOBAL_CLOCK_CONTROL,
|
|
gd->bit_idx,
|
|
CLK_GATE_SET_TO_DISABLE,
|
|
&gemini_clk_lock);
|
|
}
|
|
|
|
/*
|
|
* The TV Interface Controller has a 5-bit half divider register.
|
|
* This clock is supposed to be 27MHz as this is an exact multiple
|
|
* of PAL and NTSC frequencies. The register is undocumented :(
|
|
* FIXME: figure out the parent and how the divider works.
|
|
*/
|
|
mult = 1;
|
|
div = ((val >> TVC_HALFDIV_SHIFT) & TVC_HALFDIV_MASK);
|
|
dev_dbg(dev, "TVC half divider value = %d\n", div);
|
|
div += 1;
|
|
hw = clk_hw_register_fixed_rate(NULL, "tvcdiv", "xtal", 0, 27000000);
|
|
gemini_clk_data->hws[GEMINI_CLK_TVC] = hw;
|
|
|
|
/* FIXME: very unclear what the parent is */
|
|
hw = gemini_pci_clk_setup("PCI", "xtal", map);
|
|
gemini_clk_data->hws[GEMINI_CLK_PCI] = hw;
|
|
|
|
/* FIXME: very unclear what the parent is */
|
|
hw = clk_hw_register_fixed_rate(NULL, "uart", "xtal", 0, 48000000);
|
|
gemini_clk_data->hws[GEMINI_CLK_UART] = hw;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id gemini_clk_dt_ids[] = {
|
|
{ .compatible = "cortina,gemini-syscon", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static struct platform_driver gemini_clk_driver = {
|
|
.probe = gemini_clk_probe,
|
|
.driver = {
|
|
.name = "gemini-clk",
|
|
.of_match_table = gemini_clk_dt_ids,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
builtin_platform_driver(gemini_clk_driver);
|
|
|
|
static void __init gemini_cc_init(struct device_node *np)
|
|
{
|
|
struct regmap *map;
|
|
struct clk_hw *hw;
|
|
unsigned long freq;
|
|
unsigned int mult, div;
|
|
u32 val;
|
|
int ret;
|
|
int i;
|
|
|
|
gemini_clk_data = kzalloc(struct_size(gemini_clk_data, hws,
|
|
GEMINI_NUM_CLKS),
|
|
GFP_KERNEL);
|
|
if (!gemini_clk_data)
|
|
return;
|
|
gemini_clk_data->num = GEMINI_NUM_CLKS;
|
|
|
|
/*
|
|
* This way all clock fetched before the platform device probes,
|
|
* except those we assign here for early use, will be deferred.
|
|
*/
|
|
for (i = 0; i < GEMINI_NUM_CLKS; i++)
|
|
gemini_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
|
|
|
|
map = syscon_node_to_regmap(np);
|
|
if (IS_ERR(map)) {
|
|
pr_err("no syscon regmap\n");
|
|
return;
|
|
}
|
|
/*
|
|
* We check that the regmap works on this very first access,
|
|
* but as this is an MMIO-backed regmap, subsequent regmap
|
|
* access is not going to fail and we skip error checks from
|
|
* this point.
|
|
*/
|
|
ret = regmap_read(map, GEMINI_GLOBAL_STATUS, &val);
|
|
if (ret) {
|
|
pr_err("failed to read global status register\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* XTAL is the crystal oscillator, 60 or 30 MHz selected from
|
|
* strap pin E6
|
|
*/
|
|
if (val & PLL_OSC_SEL)
|
|
freq = 30000000;
|
|
else
|
|
freq = 60000000;
|
|
hw = clk_hw_register_fixed_rate(NULL, "xtal", NULL, 0, freq);
|
|
pr_debug("main crystal @%lu MHz\n", freq / 1000000);
|
|
|
|
/* VCO clock derived from the crystal */
|
|
mult = 13 + ((val >> AHBSPEED_SHIFT) & AHBSPEED_MASK);
|
|
div = 2;
|
|
/* If we run on 30 MHz crystal we have to multiply with two */
|
|
if (val & PLL_OSC_SEL)
|
|
mult *= 2;
|
|
hw = clk_hw_register_fixed_factor(NULL, "vco", "xtal", 0, mult, div);
|
|
|
|
/* The AHB clock is always 1/3 of the VCO */
|
|
hw = clk_hw_register_fixed_factor(NULL, "ahb", "vco", 0, 1, 3);
|
|
gemini_clk_data->hws[GEMINI_CLK_AHB] = hw;
|
|
|
|
/* The APB clock is always 1/6 of the AHB */
|
|
hw = clk_hw_register_fixed_factor(NULL, "apb", "ahb", 0, 1, 6);
|
|
gemini_clk_data->hws[GEMINI_CLK_APB] = hw;
|
|
|
|
/* Register the clocks to be accessed by the device tree */
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, gemini_clk_data);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(gemini_cc, "cortina,gemini-syscon", gemini_cc_init);
|