mirror of
https://github.com/torvalds/linux.git
synced 2024-11-26 22:21:42 +00:00
dee234032e
With the last non-OF, non-ACPI user of the GIC being removed in
e73307b9eb
("ARM: cns3xxx: remove entire platform"), we can finally
drop the entry point and do some minor cleanup.
We also make the driver depend on CONFIG_OF, which is required
even when CONFIG_ACPI is selected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230315130218.3212033-1-maz@kernel.org
1710 lines
42 KiB
C
1710 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
|
|
*
|
|
* Interrupt architecture for the GIC:
|
|
*
|
|
* o There is one Interrupt Distributor, which receives interrupts
|
|
* from system devices and sends them to the Interrupt Controllers.
|
|
*
|
|
* o There is one CPU Interface per CPU, which sends interrupts sent
|
|
* by the Distributor, and interrupts generated locally, to the
|
|
* associated CPU. The base address of the CPU interface is usually
|
|
* aliased so that the same address points to different chips depending
|
|
* on the CPU it is accessed from.
|
|
*
|
|
* Note that IRQs 0-31 are special - they are local to each CPU.
|
|
* As such, the enable set/clear, pending set/clear and active bit
|
|
* registers are banked per-cpu for these sources.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/kstrtox.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
|
|
#include <asm/cputype.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/exception.h>
|
|
#include <asm/smp_plat.h>
|
|
#include <asm/virt.h>
|
|
|
|
#include "irq-gic-common.h"
|
|
|
|
#ifdef CONFIG_ARM64
|
|
#include <asm/cpufeature.h>
|
|
|
|
static void gic_check_cpu_features(void)
|
|
{
|
|
WARN_TAINT_ONCE(this_cpu_has_cap(ARM64_HAS_GIC_CPUIF_SYSREGS),
|
|
TAINT_CPU_OUT_OF_SPEC,
|
|
"GICv3 system registers enabled, broken firmware!\n");
|
|
}
|
|
#else
|
|
#define gic_check_cpu_features() do { } while(0)
|
|
#endif
|
|
|
|
union gic_base {
|
|
void __iomem *common_base;
|
|
void __percpu * __iomem *percpu_base;
|
|
};
|
|
|
|
struct gic_chip_data {
|
|
union gic_base dist_base;
|
|
union gic_base cpu_base;
|
|
void __iomem *raw_dist_base;
|
|
void __iomem *raw_cpu_base;
|
|
u32 percpu_offset;
|
|
#if defined(CONFIG_CPU_PM) || defined(CONFIG_ARM_GIC_PM)
|
|
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
|
|
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
|
|
u32 __percpu *saved_ppi_enable;
|
|
u32 __percpu *saved_ppi_active;
|
|
u32 __percpu *saved_ppi_conf;
|
|
#endif
|
|
struct irq_domain *domain;
|
|
unsigned int gic_irqs;
|
|
};
|
|
|
|
#ifdef CONFIG_BL_SWITCHER
|
|
|
|
static DEFINE_RAW_SPINLOCK(cpu_map_lock);
|
|
|
|
#define gic_lock_irqsave(f) \
|
|
raw_spin_lock_irqsave(&cpu_map_lock, (f))
|
|
#define gic_unlock_irqrestore(f) \
|
|
raw_spin_unlock_irqrestore(&cpu_map_lock, (f))
|
|
|
|
#define gic_lock() raw_spin_lock(&cpu_map_lock)
|
|
#define gic_unlock() raw_spin_unlock(&cpu_map_lock)
|
|
|
|
#else
|
|
|
|
#define gic_lock_irqsave(f) do { (void)(f); } while(0)
|
|
#define gic_unlock_irqrestore(f) do { (void)(f); } while(0)
|
|
|
|
#define gic_lock() do { } while(0)
|
|
#define gic_unlock() do { } while(0)
|
|
|
|
#endif
|
|
|
|
static DEFINE_STATIC_KEY_FALSE(needs_rmw_access);
|
|
|
|
/*
|
|
* The GIC mapping of CPU interfaces does not necessarily match
|
|
* the logical CPU numbering. Let's use a mapping as returned
|
|
* by the GIC itself.
|
|
*/
|
|
#define NR_GIC_CPU_IF 8
|
|
static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
|
|
|
|
static DEFINE_STATIC_KEY_TRUE(supports_deactivate_key);
|
|
|
|
static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
|
|
|
|
static struct gic_kvm_info gic_v2_kvm_info __initdata;
|
|
|
|
static DEFINE_PER_CPU(u32, sgi_intid);
|
|
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
static DEFINE_STATIC_KEY_FALSE(frankengic_key);
|
|
|
|
static void enable_frankengic(void)
|
|
{
|
|
static_branch_enable(&frankengic_key);
|
|
}
|
|
|
|
static inline void __iomem *__get_base(union gic_base *base)
|
|
{
|
|
if (static_branch_unlikely(&frankengic_key))
|
|
return raw_cpu_read(*base->percpu_base);
|
|
|
|
return base->common_base;
|
|
}
|
|
|
|
#define gic_data_dist_base(d) __get_base(&(d)->dist_base)
|
|
#define gic_data_cpu_base(d) __get_base(&(d)->cpu_base)
|
|
#else
|
|
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
|
|
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
|
|
#define enable_frankengic() do { } while(0)
|
|
#endif
|
|
|
|
static inline void __iomem *gic_dist_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_dist_base(gic_data);
|
|
}
|
|
|
|
static inline void __iomem *gic_cpu_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_cpu_base(gic_data);
|
|
}
|
|
|
|
static inline unsigned int gic_irq(struct irq_data *d)
|
|
{
|
|
return d->hwirq;
|
|
}
|
|
|
|
static inline bool cascading_gic_irq(struct irq_data *d)
|
|
{
|
|
void *data = irq_data_get_irq_handler_data(d);
|
|
|
|
/*
|
|
* If handler_data is set, this is a cascading interrupt, and
|
|
* it cannot possibly be forwarded.
|
|
*/
|
|
return data != NULL;
|
|
}
|
|
|
|
/*
|
|
* Routines to acknowledge, disable and enable interrupts
|
|
*/
|
|
static void gic_poke_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
writel_relaxed(mask, gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4);
|
|
}
|
|
|
|
static int gic_peek_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
return !!(readl_relaxed(gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4) & mask);
|
|
}
|
|
|
|
static void gic_mask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
|
|
}
|
|
|
|
static void gic_eoimode1_mask_irq(struct irq_data *d)
|
|
{
|
|
gic_mask_irq(d);
|
|
/*
|
|
* When masking a forwarded interrupt, make sure it is
|
|
* deactivated as well.
|
|
*
|
|
* This ensures that an interrupt that is getting
|
|
* disabled/masked will not get "stuck", because there is
|
|
* noone to deactivate it (guest is being terminated).
|
|
*/
|
|
if (irqd_is_forwarded_to_vcpu(d))
|
|
gic_poke_irq(d, GIC_DIST_ACTIVE_CLEAR);
|
|
}
|
|
|
|
static void gic_unmask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_SET);
|
|
}
|
|
|
|
static void gic_eoi_irq(struct irq_data *d)
|
|
{
|
|
u32 hwirq = gic_irq(d);
|
|
|
|
if (hwirq < 16)
|
|
hwirq = this_cpu_read(sgi_intid);
|
|
|
|
writel_relaxed(hwirq, gic_cpu_base(d) + GIC_CPU_EOI);
|
|
}
|
|
|
|
static void gic_eoimode1_eoi_irq(struct irq_data *d)
|
|
{
|
|
u32 hwirq = gic_irq(d);
|
|
|
|
/* Do not deactivate an IRQ forwarded to a vcpu. */
|
|
if (irqd_is_forwarded_to_vcpu(d))
|
|
return;
|
|
|
|
if (hwirq < 16)
|
|
hwirq = this_cpu_read(sgi_intid);
|
|
|
|
writel_relaxed(hwirq, gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
|
|
}
|
|
|
|
static int gic_irq_set_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool val)
|
|
{
|
|
u32 reg;
|
|
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
reg = val ? GIC_DIST_PENDING_SET : GIC_DIST_PENDING_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
reg = val ? GIC_DIST_ACTIVE_SET : GIC_DIST_ACTIVE_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
reg = val ? GIC_DIST_ENABLE_CLEAR : GIC_DIST_ENABLE_SET;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
gic_poke_irq(d, reg);
|
|
return 0;
|
|
}
|
|
|
|
static int gic_irq_get_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool *val)
|
|
{
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
*val = gic_peek_irq(d, GIC_DIST_PENDING_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
*val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
*val = !gic_peek_irq(d, GIC_DIST_ENABLE_SET);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gic_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
void __iomem *base = gic_dist_base(d);
|
|
unsigned int gicirq = gic_irq(d);
|
|
int ret;
|
|
|
|
/* Interrupt configuration for SGIs can't be changed */
|
|
if (gicirq < 16)
|
|
return type != IRQ_TYPE_EDGE_RISING ? -EINVAL : 0;
|
|
|
|
/* SPIs have restrictions on the supported types */
|
|
if (gicirq >= 32 && type != IRQ_TYPE_LEVEL_HIGH &&
|
|
type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
ret = gic_configure_irq(gicirq, type, base + GIC_DIST_CONFIG, NULL);
|
|
if (ret && gicirq < 32) {
|
|
/* Misconfigured PPIs are usually not fatal */
|
|
pr_warn("GIC: PPI%d is secure or misconfigured\n", gicirq - 16);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
|
|
{
|
|
/* Only interrupts on the primary GIC can be forwarded to a vcpu. */
|
|
if (cascading_gic_irq(d) || gic_irq(d) < 16)
|
|
return -EINVAL;
|
|
|
|
if (vcpu)
|
|
irqd_set_forwarded_to_vcpu(d);
|
|
else
|
|
irqd_clr_forwarded_to_vcpu(d);
|
|
return 0;
|
|
}
|
|
|
|
static int gic_retrigger(struct irq_data *data)
|
|
{
|
|
return !gic_irq_set_irqchip_state(data, IRQCHIP_STATE_PENDING, true);
|
|
}
|
|
|
|
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
|
|
{
|
|
u32 irqstat, irqnr;
|
|
struct gic_chip_data *gic = &gic_data[0];
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
|
|
do {
|
|
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
|
|
irqnr = irqstat & GICC_IAR_INT_ID_MASK;
|
|
|
|
if (unlikely(irqnr >= 1020))
|
|
break;
|
|
|
|
if (static_branch_likely(&supports_deactivate_key))
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
|
|
isb();
|
|
|
|
/*
|
|
* Ensure any shared data written by the CPU sending the IPI
|
|
* is read after we've read the ACK register on the GIC.
|
|
*
|
|
* Pairs with the write barrier in gic_ipi_send_mask
|
|
*/
|
|
if (irqnr <= 15) {
|
|
smp_rmb();
|
|
|
|
/*
|
|
* The GIC encodes the source CPU in GICC_IAR,
|
|
* leading to the deactivation to fail if not
|
|
* written back as is to GICC_EOI. Stash the INTID
|
|
* away for gic_eoi_irq() to write back. This only
|
|
* works because we don't nest SGIs...
|
|
*/
|
|
this_cpu_write(sgi_intid, irqstat);
|
|
}
|
|
|
|
generic_handle_domain_irq(gic->domain, irqnr);
|
|
} while (1);
|
|
}
|
|
|
|
static void gic_handle_cascade_irq(struct irq_desc *desc)
|
|
{
|
|
struct gic_chip_data *chip_data = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned int gic_irq;
|
|
unsigned long status;
|
|
int ret;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
|
|
|
|
gic_irq = (status & GICC_IAR_INT_ID_MASK);
|
|
if (gic_irq == GICC_INT_SPURIOUS)
|
|
goto out;
|
|
|
|
isb();
|
|
ret = generic_handle_domain_irq(chip_data->domain, gic_irq);
|
|
if (unlikely(ret))
|
|
handle_bad_irq(desc);
|
|
out:
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static void gic_irq_print_chip(struct irq_data *d, struct seq_file *p)
|
|
{
|
|
struct gic_chip_data *gic = irq_data_get_irq_chip_data(d);
|
|
|
|
if (gic->domain->pm_dev)
|
|
seq_printf(p, gic->domain->pm_dev->of_node->name);
|
|
else
|
|
seq_printf(p, "GIC-%d", (int)(gic - &gic_data[0]));
|
|
}
|
|
|
|
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|
{
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq,
|
|
&gic_data[gic_nr]);
|
|
}
|
|
|
|
static u8 gic_get_cpumask(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
u32 mask, i;
|
|
|
|
for (i = mask = 0; i < 32; i += 4) {
|
|
mask = readl_relaxed(base + GIC_DIST_TARGET + i);
|
|
mask |= mask >> 16;
|
|
mask |= mask >> 8;
|
|
if (mask)
|
|
break;
|
|
}
|
|
|
|
if (!mask && num_possible_cpus() > 1)
|
|
pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
|
|
|
|
return mask;
|
|
}
|
|
|
|
static bool gic_check_gicv2(void __iomem *base)
|
|
{
|
|
u32 val = readl_relaxed(base + GIC_CPU_IDENT);
|
|
return (val & 0xff0fff) == 0x02043B;
|
|
}
|
|
|
|
static void gic_cpu_if_up(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
u32 bypass = 0;
|
|
u32 mode = 0;
|
|
int i;
|
|
|
|
if (gic == &gic_data[0] && static_branch_likely(&supports_deactivate_key))
|
|
mode = GIC_CPU_CTRL_EOImodeNS;
|
|
|
|
if (gic_check_gicv2(cpu_base))
|
|
for (i = 0; i < 4; i++)
|
|
writel_relaxed(0, cpu_base + GIC_CPU_ACTIVEPRIO + i * 4);
|
|
|
|
/*
|
|
* Preserve bypass disable bits to be written back later
|
|
*/
|
|
bypass = readl(cpu_base + GIC_CPU_CTRL);
|
|
bypass &= GICC_DIS_BYPASS_MASK;
|
|
|
|
writel_relaxed(bypass | mode | GICC_ENABLE, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
|
|
static void gic_dist_init(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int i;
|
|
u32 cpumask;
|
|
unsigned int gic_irqs = gic->gic_irqs;
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
|
|
writel_relaxed(GICD_DISABLE, base + GIC_DIST_CTRL);
|
|
|
|
/*
|
|
* Set all global interrupts to this CPU only.
|
|
*/
|
|
cpumask = gic_get_cpumask(gic);
|
|
cpumask |= cpumask << 8;
|
|
cpumask |= cpumask << 16;
|
|
for (i = 32; i < gic_irqs; i += 4)
|
|
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
|
|
|
gic_dist_config(base, gic_irqs, NULL);
|
|
|
|
writel_relaxed(GICD_ENABLE, base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static int gic_cpu_init(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *dist_base = gic_data_dist_base(gic);
|
|
void __iomem *base = gic_data_cpu_base(gic);
|
|
unsigned int cpu_mask, cpu = smp_processor_id();
|
|
int i;
|
|
|
|
/*
|
|
* Setting up the CPU map is only relevant for the primary GIC
|
|
* because any nested/secondary GICs do not directly interface
|
|
* with the CPU(s).
|
|
*/
|
|
if (gic == &gic_data[0]) {
|
|
/*
|
|
* Get what the GIC says our CPU mask is.
|
|
*/
|
|
if (WARN_ON(cpu >= NR_GIC_CPU_IF))
|
|
return -EINVAL;
|
|
|
|
gic_check_cpu_features();
|
|
cpu_mask = gic_get_cpumask(gic);
|
|
gic_cpu_map[cpu] = cpu_mask;
|
|
|
|
/*
|
|
* Clear our mask from the other map entries in case they're
|
|
* still undefined.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
if (i != cpu)
|
|
gic_cpu_map[i] &= ~cpu_mask;
|
|
}
|
|
|
|
gic_cpu_config(dist_base, 32, NULL);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up(gic);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gic_cpu_if_down(unsigned int gic_nr)
|
|
{
|
|
void __iomem *cpu_base;
|
|
u32 val = 0;
|
|
|
|
if (gic_nr >= CONFIG_ARM_GIC_MAX_NR)
|
|
return -EINVAL;
|
|
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
val = readl(cpu_base + GIC_CPU_CTRL);
|
|
val &= ~GICC_ENABLE;
|
|
writel_relaxed(val, cpu_base + GIC_CPU_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CPU_PM) || defined(CONFIG_ARM_GIC_PM)
|
|
/*
|
|
* Saves the GIC distributor registers during suspend or idle. Must be called
|
|
* with interrupts disabled but before powering down the GIC. After calling
|
|
* this function, no interrupts will be delivered by the GIC, and another
|
|
* platform-specific wakeup source must be enabled.
|
|
*/
|
|
void gic_dist_save(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int gic_irqs;
|
|
void __iomem *dist_base;
|
|
int i;
|
|
|
|
if (WARN_ON(!gic))
|
|
return;
|
|
|
|
gic_irqs = gic->gic_irqs;
|
|
dist_base = gic_data_dist_base(gic);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
gic->saved_spi_conf[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
gic->saved_spi_target[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic->saved_spi_enable[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic->saved_spi_active[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
/*
|
|
* Restores the GIC distributor registers during resume or when coming out of
|
|
* idle. Must be called before enabling interrupts. If a level interrupt
|
|
* that occurred while the GIC was suspended is still present, it will be
|
|
* handled normally, but any edge interrupts that occurred will not be seen by
|
|
* the GIC and need to be handled by the platform-specific wakeup source.
|
|
*/
|
|
void gic_dist_restore(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int gic_irqs;
|
|
unsigned int i;
|
|
void __iomem *dist_base;
|
|
|
|
if (WARN_ON(!gic))
|
|
return;
|
|
|
|
gic_irqs = gic->gic_irqs;
|
|
dist_base = gic_data_dist_base(gic);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
writel_relaxed(GICD_DISABLE, dist_base + GIC_DIST_CTRL);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
writel_relaxed(gic->saved_spi_conf[i],
|
|
dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(gic->saved_spi_target[i],
|
|
dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
|
|
writel_relaxed(gic->saved_spi_enable[i],
|
|
dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
|
|
writel_relaxed(gic->saved_spi_active[i],
|
|
dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
void gic_cpu_save(struct gic_chip_data *gic)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (WARN_ON(!gic))
|
|
return;
|
|
|
|
dist_base = gic_data_dist_base(gic);
|
|
cpu_base = gic_data_cpu_base(gic);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_active);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
}
|
|
|
|
void gic_cpu_restore(struct gic_chip_data *gic)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (WARN_ON(!gic))
|
|
return;
|
|
|
|
dist_base = gic_data_dist_base(gic);
|
|
cpu_base = gic_data_cpu_base(gic);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_active);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
ptr = raw_cpu_ptr(gic->saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up(gic);
|
|
}
|
|
|
|
static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_ARM_GIC_MAX_NR; i++) {
|
|
switch (cmd) {
|
|
case CPU_PM_ENTER:
|
|
gic_cpu_save(&gic_data[i]);
|
|
break;
|
|
case CPU_PM_ENTER_FAILED:
|
|
case CPU_PM_EXIT:
|
|
gic_cpu_restore(&gic_data[i]);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER:
|
|
gic_dist_save(&gic_data[i]);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER_FAILED:
|
|
case CPU_CLUSTER_PM_EXIT:
|
|
gic_dist_restore(&gic_data[i]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block gic_notifier_block = {
|
|
.notifier_call = gic_notifier,
|
|
};
|
|
|
|
static int gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
if (WARN_ON(!gic->saved_ppi_enable))
|
|
return -ENOMEM;
|
|
|
|
gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
if (WARN_ON(!gic->saved_ppi_active))
|
|
goto free_ppi_enable;
|
|
|
|
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
|
|
sizeof(u32));
|
|
if (WARN_ON(!gic->saved_ppi_conf))
|
|
goto free_ppi_active;
|
|
|
|
if (gic == &gic_data[0])
|
|
cpu_pm_register_notifier(&gic_notifier_block);
|
|
|
|
return 0;
|
|
|
|
free_ppi_active:
|
|
free_percpu(gic->saved_ppi_active);
|
|
free_ppi_enable:
|
|
free_percpu(gic->saved_ppi_enable);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
#else
|
|
static int gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void rmw_writeb(u8 bval, void __iomem *addr)
|
|
{
|
|
static DEFINE_RAW_SPINLOCK(rmw_lock);
|
|
unsigned long offset = (unsigned long)addr & 3UL;
|
|
unsigned long shift = offset * 8;
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
raw_spin_lock_irqsave(&rmw_lock, flags);
|
|
|
|
addr -= offset;
|
|
val = readl_relaxed(addr);
|
|
val &= ~GENMASK(shift + 7, shift);
|
|
val |= bval << shift;
|
|
writel_relaxed(val, addr);
|
|
|
|
raw_spin_unlock_irqrestore(&rmw_lock, flags);
|
|
}
|
|
|
|
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
|
|
bool force)
|
|
{
|
|
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + gic_irq(d);
|
|
struct gic_chip_data *gic = irq_data_get_irq_chip_data(d);
|
|
unsigned int cpu;
|
|
|
|
if (unlikely(gic != &gic_data[0]))
|
|
return -EINVAL;
|
|
|
|
if (!force)
|
|
cpu = cpumask_any_and(mask_val, cpu_online_mask);
|
|
else
|
|
cpu = cpumask_first(mask_val);
|
|
|
|
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
|
|
return -EINVAL;
|
|
|
|
if (static_branch_unlikely(&needs_rmw_access))
|
|
rmw_writeb(gic_cpu_map[cpu], reg);
|
|
else
|
|
writeb_relaxed(gic_cpu_map[cpu], reg);
|
|
irq_data_update_effective_affinity(d, cpumask_of(cpu));
|
|
|
|
return IRQ_SET_MASK_OK_DONE;
|
|
}
|
|
|
|
static void gic_ipi_send_mask(struct irq_data *d, const struct cpumask *mask)
|
|
{
|
|
int cpu;
|
|
unsigned long flags, map = 0;
|
|
|
|
if (unlikely(nr_cpu_ids == 1)) {
|
|
/* Only one CPU? let's do a self-IPI... */
|
|
writel_relaxed(2 << 24 | d->hwirq,
|
|
gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
return;
|
|
}
|
|
|
|
gic_lock_irqsave(flags);
|
|
|
|
/* Convert our logical CPU mask into a physical one. */
|
|
for_each_cpu(cpu, mask)
|
|
map |= gic_cpu_map[cpu];
|
|
|
|
/*
|
|
* Ensure that stores to Normal memory are visible to the
|
|
* other CPUs before they observe us issuing the IPI.
|
|
*/
|
|
dmb(ishst);
|
|
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed(map << 16 | d->hwirq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
|
|
gic_unlock_irqrestore(flags);
|
|
}
|
|
|
|
static int gic_starting_cpu(unsigned int cpu)
|
|
{
|
|
gic_cpu_init(&gic_data[0]);
|
|
return 0;
|
|
}
|
|
|
|
static __init void gic_smp_init(void)
|
|
{
|
|
struct irq_fwspec sgi_fwspec = {
|
|
.fwnode = gic_data[0].domain->fwnode,
|
|
.param_count = 1,
|
|
};
|
|
int base_sgi;
|
|
|
|
cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING,
|
|
"irqchip/arm/gic:starting",
|
|
gic_starting_cpu, NULL);
|
|
|
|
base_sgi = irq_domain_alloc_irqs(gic_data[0].domain, 8, NUMA_NO_NODE, &sgi_fwspec);
|
|
if (WARN_ON(base_sgi <= 0))
|
|
return;
|
|
|
|
set_smp_ipi_range(base_sgi, 8);
|
|
}
|
|
#else
|
|
#define gic_smp_init() do { } while(0)
|
|
#define gic_set_affinity NULL
|
|
#define gic_ipi_send_mask NULL
|
|
#endif
|
|
|
|
static const struct irq_chip gic_chip = {
|
|
.irq_mask = gic_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
.irq_retrigger = gic_retrigger,
|
|
.irq_set_affinity = gic_set_affinity,
|
|
.ipi_send_mask = gic_ipi_send_mask,
|
|
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
|
|
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
|
|
.irq_print_chip = gic_irq_print_chip,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_MASK_ON_SUSPEND,
|
|
};
|
|
|
|
static const struct irq_chip gic_chip_mode1 = {
|
|
.name = "GICv2",
|
|
.irq_mask = gic_eoimode1_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoimode1_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
.irq_retrigger = gic_retrigger,
|
|
.irq_set_affinity = gic_set_affinity,
|
|
.ipi_send_mask = gic_ipi_send_mask,
|
|
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
|
|
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
|
|
.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_MASK_ON_SUSPEND,
|
|
};
|
|
|
|
#ifdef CONFIG_BL_SWITCHER
|
|
/*
|
|
* gic_send_sgi - send a SGI directly to given CPU interface number
|
|
*
|
|
* cpu_id: the ID for the destination CPU interface
|
|
* irq: the IPI number to send a SGI for
|
|
*/
|
|
void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
|
|
{
|
|
BUG_ON(cpu_id >= NR_GIC_CPU_IF);
|
|
cpu_id = 1 << cpu_id;
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
}
|
|
|
|
/*
|
|
* gic_get_cpu_id - get the CPU interface ID for the specified CPU
|
|
*
|
|
* @cpu: the logical CPU number to get the GIC ID for.
|
|
*
|
|
* Return the CPU interface ID for the given logical CPU number,
|
|
* or -1 if the CPU number is too large or the interface ID is
|
|
* unknown (more than one bit set).
|
|
*/
|
|
int gic_get_cpu_id(unsigned int cpu)
|
|
{
|
|
unsigned int cpu_bit;
|
|
|
|
if (cpu >= NR_GIC_CPU_IF)
|
|
return -1;
|
|
cpu_bit = gic_cpu_map[cpu];
|
|
if (cpu_bit & (cpu_bit - 1))
|
|
return -1;
|
|
return __ffs(cpu_bit);
|
|
}
|
|
|
|
/*
|
|
* gic_migrate_target - migrate IRQs to another CPU interface
|
|
*
|
|
* @new_cpu_id: the CPU target ID to migrate IRQs to
|
|
*
|
|
* Migrate all peripheral interrupts with a target matching the current CPU
|
|
* to the interface corresponding to @new_cpu_id. The CPU interface mapping
|
|
* is also updated. Targets to other CPU interfaces are unchanged.
|
|
* This must be called with IRQs locally disabled.
|
|
*/
|
|
void gic_migrate_target(unsigned int new_cpu_id)
|
|
{
|
|
unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
|
|
void __iomem *dist_base;
|
|
int i, ror_val, cpu = smp_processor_id();
|
|
u32 val, cur_target_mask, active_mask;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
if (!dist_base)
|
|
return;
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
|
|
cur_cpu_id = __ffs(gic_cpu_map[cpu]);
|
|
cur_target_mask = 0x01010101 << cur_cpu_id;
|
|
ror_val = (cur_cpu_id - new_cpu_id) & 31;
|
|
|
|
gic_lock();
|
|
|
|
/* Update the target interface for this logical CPU */
|
|
gic_cpu_map[cpu] = 1 << new_cpu_id;
|
|
|
|
/*
|
|
* Find all the peripheral interrupts targeting the current
|
|
* CPU interface and migrate them to the new CPU interface.
|
|
* We skip DIST_TARGET 0 to 7 as they are read-only.
|
|
*/
|
|
for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
|
|
val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
active_mask = val & cur_target_mask;
|
|
if (active_mask) {
|
|
val &= ~active_mask;
|
|
val |= ror32(active_mask, ror_val);
|
|
writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
|
|
}
|
|
}
|
|
|
|
gic_unlock();
|
|
|
|
/*
|
|
* Now let's migrate and clear any potential SGIs that might be
|
|
* pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
|
|
* is a banked register, we can only forward the SGI using
|
|
* GIC_DIST_SOFTINT. The original SGI source is lost but Linux
|
|
* doesn't use that information anyway.
|
|
*
|
|
* For the same reason we do not adjust SGI source information
|
|
* for previously sent SGIs by us to other CPUs either.
|
|
*/
|
|
for (i = 0; i < 16; i += 4) {
|
|
int j;
|
|
val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
|
|
if (!val)
|
|
continue;
|
|
writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
|
|
for (j = i; j < i + 4; j++) {
|
|
if (val & 0xff)
|
|
writel_relaxed((1 << (new_cpu_id + 16)) | j,
|
|
dist_base + GIC_DIST_SOFTINT);
|
|
val >>= 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* gic_get_sgir_physaddr - get the physical address for the SGI register
|
|
*
|
|
* Return the physical address of the SGI register to be used
|
|
* by some early assembly code when the kernel is not yet available.
|
|
*/
|
|
static unsigned long gic_dist_physaddr;
|
|
|
|
unsigned long gic_get_sgir_physaddr(void)
|
|
{
|
|
if (!gic_dist_physaddr)
|
|
return 0;
|
|
return gic_dist_physaddr + GIC_DIST_SOFTINT;
|
|
}
|
|
|
|
static void __init gic_init_physaddr(struct device_node *node)
|
|
{
|
|
struct resource res;
|
|
if (of_address_to_resource(node, 0, &res) == 0) {
|
|
gic_dist_physaddr = res.start;
|
|
pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gic_init_physaddr(node) do { } while (0)
|
|
#endif
|
|
|
|
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
struct gic_chip_data *gic = d->host_data;
|
|
struct irq_data *irqd = irq_desc_get_irq_data(irq_to_desc(irq));
|
|
const struct irq_chip *chip;
|
|
|
|
chip = (static_branch_likely(&supports_deactivate_key) &&
|
|
gic == &gic_data[0]) ? &gic_chip_mode1 : &gic_chip;
|
|
|
|
switch (hw) {
|
|
case 0 ... 31:
|
|
irq_set_percpu_devid(irq);
|
|
irq_domain_set_info(d, irq, hw, chip, d->host_data,
|
|
handle_percpu_devid_irq, NULL, NULL);
|
|
break;
|
|
default:
|
|
irq_domain_set_info(d, irq, hw, chip, d->host_data,
|
|
handle_fasteoi_irq, NULL, NULL);
|
|
irq_set_probe(irq);
|
|
irqd_set_single_target(irqd);
|
|
break;
|
|
}
|
|
|
|
/* Prevents SW retriggers which mess up the ACK/EOI ordering */
|
|
irqd_set_handle_enforce_irqctx(irqd);
|
|
return 0;
|
|
}
|
|
|
|
static int gic_irq_domain_translate(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *hwirq,
|
|
unsigned int *type)
|
|
{
|
|
if (fwspec->param_count == 1 && fwspec->param[0] < 16) {
|
|
*hwirq = fwspec->param[0];
|
|
*type = IRQ_TYPE_EDGE_RISING;
|
|
return 0;
|
|
}
|
|
|
|
if (is_of_node(fwspec->fwnode)) {
|
|
if (fwspec->param_count < 3)
|
|
return -EINVAL;
|
|
|
|
switch (fwspec->param[0]) {
|
|
case 0: /* SPI */
|
|
*hwirq = fwspec->param[1] + 32;
|
|
break;
|
|
case 1: /* PPI */
|
|
*hwirq = fwspec->param[1] + 16;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
/* Make it clear that broken DTs are... broken */
|
|
WARN(*type == IRQ_TYPE_NONE,
|
|
"HW irq %ld has invalid type\n", *hwirq);
|
|
return 0;
|
|
}
|
|
|
|
if (is_fwnode_irqchip(fwspec->fwnode)) {
|
|
if(fwspec->param_count != 2)
|
|
return -EINVAL;
|
|
|
|
if (fwspec->param[0] < 16) {
|
|
pr_err(FW_BUG "Illegal GSI%d translation request\n",
|
|
fwspec->param[0]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*hwirq = fwspec->param[0];
|
|
*type = fwspec->param[1];
|
|
|
|
WARN(*type == IRQ_TYPE_NONE,
|
|
"HW irq %ld has invalid type\n", *hwirq);
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs, void *arg)
|
|
{
|
|
int i, ret;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type = IRQ_TYPE_NONE;
|
|
struct irq_fwspec *fwspec = arg;
|
|
|
|
ret = gic_irq_domain_translate(domain, fwspec, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
ret = gic_irq_domain_map(domain, virq + i, hwirq + i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
|
|
.translate = gic_irq_domain_translate,
|
|
.alloc = gic_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_top,
|
|
};
|
|
|
|
static int gic_init_bases(struct gic_chip_data *gic,
|
|
struct fwnode_handle *handle)
|
|
{
|
|
int gic_irqs, ret;
|
|
|
|
if (IS_ENABLED(CONFIG_GIC_NON_BANKED) && gic->percpu_offset) {
|
|
/* Frankein-GIC without banked registers... */
|
|
unsigned int cpu;
|
|
|
|
gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
|
|
gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
|
|
if (WARN_ON(!gic->dist_base.percpu_base ||
|
|
!gic->cpu_base.percpu_base)) {
|
|
ret = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
u32 mpidr = cpu_logical_map(cpu);
|
|
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
|
|
unsigned long offset = gic->percpu_offset * core_id;
|
|
*per_cpu_ptr(gic->dist_base.percpu_base, cpu) =
|
|
gic->raw_dist_base + offset;
|
|
*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) =
|
|
gic->raw_cpu_base + offset;
|
|
}
|
|
|
|
enable_frankengic();
|
|
} else {
|
|
/* Normal, sane GIC... */
|
|
WARN(gic->percpu_offset,
|
|
"GIC_NON_BANKED not enabled, ignoring %08x offset!",
|
|
gic->percpu_offset);
|
|
gic->dist_base.common_base = gic->raw_dist_base;
|
|
gic->cpu_base.common_base = gic->raw_cpu_base;
|
|
}
|
|
|
|
/*
|
|
* Find out how many interrupts are supported.
|
|
* The GIC only supports up to 1020 interrupt sources.
|
|
*/
|
|
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
|
|
gic_irqs = (gic_irqs + 1) * 32;
|
|
if (gic_irqs > 1020)
|
|
gic_irqs = 1020;
|
|
gic->gic_irqs = gic_irqs;
|
|
|
|
gic->domain = irq_domain_create_linear(handle, gic_irqs,
|
|
&gic_irq_domain_hierarchy_ops,
|
|
gic);
|
|
if (WARN_ON(!gic->domain)) {
|
|
ret = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
gic_dist_init(gic);
|
|
ret = gic_cpu_init(gic);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = gic_pm_init(gic);
|
|
if (ret)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
if (IS_ENABLED(CONFIG_GIC_NON_BANKED) && gic->percpu_offset) {
|
|
free_percpu(gic->dist_base.percpu_base);
|
|
free_percpu(gic->cpu_base.percpu_base);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init __gic_init_bases(struct gic_chip_data *gic,
|
|
struct fwnode_handle *handle)
|
|
{
|
|
int i, ret;
|
|
|
|
if (WARN_ON(!gic || gic->domain))
|
|
return -EINVAL;
|
|
|
|
if (gic == &gic_data[0]) {
|
|
/*
|
|
* Initialize the CPU interface map to all CPUs.
|
|
* It will be refined as each CPU probes its ID.
|
|
* This is only necessary for the primary GIC.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
gic_cpu_map[i] = 0xff;
|
|
|
|
set_handle_irq(gic_handle_irq);
|
|
if (static_branch_likely(&supports_deactivate_key))
|
|
pr_info("GIC: Using split EOI/Deactivate mode\n");
|
|
}
|
|
|
|
ret = gic_init_bases(gic, handle);
|
|
if (gic == &gic_data[0])
|
|
gic_smp_init();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void gic_teardown(struct gic_chip_data *gic)
|
|
{
|
|
if (WARN_ON(!gic))
|
|
return;
|
|
|
|
if (gic->raw_dist_base)
|
|
iounmap(gic->raw_dist_base);
|
|
if (gic->raw_cpu_base)
|
|
iounmap(gic->raw_cpu_base);
|
|
}
|
|
|
|
static int gic_cnt __initdata;
|
|
static bool gicv2_force_probe;
|
|
|
|
static int __init gicv2_force_probe_cfg(char *buf)
|
|
{
|
|
return kstrtobool(buf, &gicv2_force_probe);
|
|
}
|
|
early_param("irqchip.gicv2_force_probe", gicv2_force_probe_cfg);
|
|
|
|
static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
|
|
{
|
|
struct resource cpuif_res;
|
|
|
|
of_address_to_resource(node, 1, &cpuif_res);
|
|
|
|
if (!is_hyp_mode_available())
|
|
return false;
|
|
if (resource_size(&cpuif_res) < SZ_8K) {
|
|
void __iomem *alt;
|
|
/*
|
|
* Check for a stupid firmware that only exposes the
|
|
* first page of a GICv2.
|
|
*/
|
|
if (!gic_check_gicv2(*base))
|
|
return false;
|
|
|
|
if (!gicv2_force_probe) {
|
|
pr_warn("GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set\n");
|
|
return false;
|
|
}
|
|
|
|
alt = ioremap(cpuif_res.start, SZ_8K);
|
|
if (!alt)
|
|
return false;
|
|
if (!gic_check_gicv2(alt + SZ_4K)) {
|
|
/*
|
|
* The first page was that of a GICv2, and
|
|
* the second was *something*. Let's trust it
|
|
* to be a GICv2, and update the mapping.
|
|
*/
|
|
pr_warn("GIC: GICv2 at %pa, but range is too small (broken DT?), assuming 8kB\n",
|
|
&cpuif_res.start);
|
|
iounmap(*base);
|
|
*base = alt;
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* We detected *two* initial GICv2 pages in a
|
|
* row. Could be a GICv2 aliased over two 64kB
|
|
* pages. Update the resource, map the iospace, and
|
|
* pray.
|
|
*/
|
|
iounmap(alt);
|
|
alt = ioremap(cpuif_res.start, SZ_128K);
|
|
if (!alt)
|
|
return false;
|
|
pr_warn("GIC: Aliased GICv2 at %pa, trying to find the canonical range over 128kB\n",
|
|
&cpuif_res.start);
|
|
cpuif_res.end = cpuif_res.start + SZ_128K -1;
|
|
iounmap(*base);
|
|
*base = alt;
|
|
}
|
|
if (resource_size(&cpuif_res) == SZ_128K) {
|
|
/*
|
|
* Verify that we have the first 4kB of a GICv2
|
|
* aliased over the first 64kB by checking the
|
|
* GICC_IIDR register on both ends.
|
|
*/
|
|
if (!gic_check_gicv2(*base) ||
|
|
!gic_check_gicv2(*base + 0xf000))
|
|
return false;
|
|
|
|
/*
|
|
* Move the base up by 60kB, so that we have a 8kB
|
|
* contiguous region, which allows us to use GICC_DIR
|
|
* at its normal offset. Please pass me that bucket.
|
|
*/
|
|
*base += 0xf000;
|
|
cpuif_res.start += 0xf000;
|
|
pr_warn("GIC: Adjusting CPU interface base to %pa\n",
|
|
&cpuif_res.start);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool gic_enable_rmw_access(void *data)
|
|
{
|
|
/*
|
|
* The EMEV2 class of machines has a broken interconnect, and
|
|
* locks up on accesses that are less than 32bit. So far, only
|
|
* the affinity setting requires it.
|
|
*/
|
|
if (of_machine_is_compatible("renesas,emev2")) {
|
|
static_branch_enable(&needs_rmw_access);
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static const struct gic_quirk gic_quirks[] = {
|
|
{
|
|
.desc = "broken byte access",
|
|
.compatible = "arm,pl390",
|
|
.init = gic_enable_rmw_access,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node)
|
|
{
|
|
if (!gic || !node)
|
|
return -EINVAL;
|
|
|
|
gic->raw_dist_base = of_iomap(node, 0);
|
|
if (WARN(!gic->raw_dist_base, "unable to map gic dist registers\n"))
|
|
goto error;
|
|
|
|
gic->raw_cpu_base = of_iomap(node, 1);
|
|
if (WARN(!gic->raw_cpu_base, "unable to map gic cpu registers\n"))
|
|
goto error;
|
|
|
|
if (of_property_read_u32(node, "cpu-offset", &gic->percpu_offset))
|
|
gic->percpu_offset = 0;
|
|
|
|
gic_enable_of_quirks(node, gic_quirks, gic);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
gic_teardown(gic);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
int gic_of_init_child(struct device *dev, struct gic_chip_data **gic, int irq)
|
|
{
|
|
int ret;
|
|
|
|
if (!dev || !dev->of_node || !gic || !irq)
|
|
return -EINVAL;
|
|
|
|
*gic = devm_kzalloc(dev, sizeof(**gic), GFP_KERNEL);
|
|
if (!*gic)
|
|
return -ENOMEM;
|
|
|
|
ret = gic_of_setup(*gic, dev->of_node);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gic_init_bases(*gic, &dev->of_node->fwnode);
|
|
if (ret) {
|
|
gic_teardown(*gic);
|
|
return ret;
|
|
}
|
|
|
|
irq_domain_set_pm_device((*gic)->domain, dev);
|
|
irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq, *gic);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init gic_of_setup_kvm_info(struct device_node *node)
|
|
{
|
|
int ret;
|
|
struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
|
|
struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
|
|
|
|
gic_v2_kvm_info.type = GIC_V2;
|
|
|
|
gic_v2_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
|
|
if (!gic_v2_kvm_info.maint_irq)
|
|
return;
|
|
|
|
ret = of_address_to_resource(node, 2, vctrl_res);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = of_address_to_resource(node, 3, vcpu_res);
|
|
if (ret)
|
|
return;
|
|
|
|
if (static_branch_likely(&supports_deactivate_key))
|
|
vgic_set_kvm_info(&gic_v2_kvm_info);
|
|
}
|
|
|
|
int __init
|
|
gic_of_init(struct device_node *node, struct device_node *parent)
|
|
{
|
|
struct gic_chip_data *gic;
|
|
int irq, ret;
|
|
|
|
if (WARN_ON(!node))
|
|
return -ENODEV;
|
|
|
|
if (WARN_ON(gic_cnt >= CONFIG_ARM_GIC_MAX_NR))
|
|
return -EINVAL;
|
|
|
|
gic = &gic_data[gic_cnt];
|
|
|
|
ret = gic_of_setup(gic, node);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Disable split EOI/Deactivate if either HYP is not available
|
|
* or the CPU interface is too small.
|
|
*/
|
|
if (gic_cnt == 0 && !gic_check_eoimode(node, &gic->raw_cpu_base))
|
|
static_branch_disable(&supports_deactivate_key);
|
|
|
|
ret = __gic_init_bases(gic, &node->fwnode);
|
|
if (ret) {
|
|
gic_teardown(gic);
|
|
return ret;
|
|
}
|
|
|
|
if (!gic_cnt) {
|
|
gic_init_physaddr(node);
|
|
gic_of_setup_kvm_info(node);
|
|
}
|
|
|
|
if (parent) {
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
gic_cascade_irq(gic_cnt, irq);
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
|
|
gicv2m_init(&node->fwnode, gic_data[gic_cnt].domain);
|
|
|
|
gic_cnt++;
|
|
return 0;
|
|
}
|
|
IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
|
|
IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
|
|
IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static struct
|
|
{
|
|
phys_addr_t cpu_phys_base;
|
|
u32 maint_irq;
|
|
int maint_irq_mode;
|
|
phys_addr_t vctrl_base;
|
|
phys_addr_t vcpu_base;
|
|
} acpi_data __initdata;
|
|
|
|
static int __init
|
|
gic_acpi_parse_madt_cpu(union acpi_subtable_headers *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_interrupt *processor;
|
|
phys_addr_t gic_cpu_base;
|
|
static int cpu_base_assigned;
|
|
|
|
processor = (struct acpi_madt_generic_interrupt *)header;
|
|
|
|
if (BAD_MADT_GICC_ENTRY(processor, end))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* There is no support for non-banked GICv1/2 register in ACPI spec.
|
|
* All CPU interface addresses have to be the same.
|
|
*/
|
|
gic_cpu_base = processor->base_address;
|
|
if (cpu_base_assigned && gic_cpu_base != acpi_data.cpu_phys_base)
|
|
return -EINVAL;
|
|
|
|
acpi_data.cpu_phys_base = gic_cpu_base;
|
|
acpi_data.maint_irq = processor->vgic_interrupt;
|
|
acpi_data.maint_irq_mode = (processor->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
|
|
ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
|
|
acpi_data.vctrl_base = processor->gich_base_address;
|
|
acpi_data.vcpu_base = processor->gicv_base_address;
|
|
|
|
cpu_base_assigned = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* The things you have to do to just *count* something... */
|
|
static int __init acpi_dummy_func(union acpi_subtable_headers *header,
|
|
const unsigned long end)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static bool __init acpi_gic_redist_is_present(void)
|
|
{
|
|
return acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
|
|
acpi_dummy_func, 0) > 0;
|
|
}
|
|
|
|
static bool __init gic_validate_dist(struct acpi_subtable_header *header,
|
|
struct acpi_probe_entry *ape)
|
|
{
|
|
struct acpi_madt_generic_distributor *dist;
|
|
dist = (struct acpi_madt_generic_distributor *)header;
|
|
|
|
return (dist->version == ape->driver_data &&
|
|
(dist->version != ACPI_MADT_GIC_VERSION_NONE ||
|
|
!acpi_gic_redist_is_present()));
|
|
}
|
|
|
|
#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
|
|
#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
|
|
#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K)
|
|
#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K)
|
|
|
|
static void __init gic_acpi_setup_kvm_info(void)
|
|
{
|
|
int irq;
|
|
struct resource *vctrl_res = &gic_v2_kvm_info.vctrl;
|
|
struct resource *vcpu_res = &gic_v2_kvm_info.vcpu;
|
|
|
|
gic_v2_kvm_info.type = GIC_V2;
|
|
|
|
if (!acpi_data.vctrl_base)
|
|
return;
|
|
|
|
vctrl_res->flags = IORESOURCE_MEM;
|
|
vctrl_res->start = acpi_data.vctrl_base;
|
|
vctrl_res->end = vctrl_res->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
|
|
|
|
if (!acpi_data.vcpu_base)
|
|
return;
|
|
|
|
vcpu_res->flags = IORESOURCE_MEM;
|
|
vcpu_res->start = acpi_data.vcpu_base;
|
|
vcpu_res->end = vcpu_res->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
|
|
|
|
irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
|
|
acpi_data.maint_irq_mode,
|
|
ACPI_ACTIVE_HIGH);
|
|
if (irq <= 0)
|
|
return;
|
|
|
|
gic_v2_kvm_info.maint_irq = irq;
|
|
|
|
vgic_set_kvm_info(&gic_v2_kvm_info);
|
|
}
|
|
|
|
static struct fwnode_handle *gsi_domain_handle;
|
|
|
|
static struct fwnode_handle *gic_v2_get_gsi_domain_id(u32 gsi)
|
|
{
|
|
return gsi_domain_handle;
|
|
}
|
|
|
|
static int __init gic_v2_acpi_init(union acpi_subtable_headers *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_distributor *dist;
|
|
struct gic_chip_data *gic = &gic_data[0];
|
|
int count, ret;
|
|
|
|
/* Collect CPU base addresses */
|
|
count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
|
|
gic_acpi_parse_madt_cpu, 0);
|
|
if (count <= 0) {
|
|
pr_err("No valid GICC entries exist\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gic->raw_cpu_base = ioremap(acpi_data.cpu_phys_base, ACPI_GIC_CPU_IF_MEM_SIZE);
|
|
if (!gic->raw_cpu_base) {
|
|
pr_err("Unable to map GICC registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dist = (struct acpi_madt_generic_distributor *)header;
|
|
gic->raw_dist_base = ioremap(dist->base_address,
|
|
ACPI_GICV2_DIST_MEM_SIZE);
|
|
if (!gic->raw_dist_base) {
|
|
pr_err("Unable to map GICD registers\n");
|
|
gic_teardown(gic);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Disable split EOI/Deactivate if HYP is not available. ACPI
|
|
* guarantees that we'll always have a GICv2, so the CPU
|
|
* interface will always be the right size.
|
|
*/
|
|
if (!is_hyp_mode_available())
|
|
static_branch_disable(&supports_deactivate_key);
|
|
|
|
/*
|
|
* Initialize GIC instance zero (no multi-GIC support).
|
|
*/
|
|
gsi_domain_handle = irq_domain_alloc_fwnode(&dist->base_address);
|
|
if (!gsi_domain_handle) {
|
|
pr_err("Unable to allocate domain handle\n");
|
|
gic_teardown(gic);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = __gic_init_bases(gic, gsi_domain_handle);
|
|
if (ret) {
|
|
pr_err("Failed to initialise GIC\n");
|
|
irq_domain_free_fwnode(gsi_domain_handle);
|
|
gic_teardown(gic);
|
|
return ret;
|
|
}
|
|
|
|
acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, gic_v2_get_gsi_domain_id);
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
|
|
gicv2m_init(NULL, gic_data[0].domain);
|
|
|
|
if (static_branch_likely(&supports_deactivate_key))
|
|
gic_acpi_setup_kvm_info();
|
|
|
|
return 0;
|
|
}
|
|
IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
|
|
gic_validate_dist, ACPI_MADT_GIC_VERSION_V2,
|
|
gic_v2_acpi_init);
|
|
IRQCHIP_ACPI_DECLARE(gic_v2_maybe, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
|
|
gic_validate_dist, ACPI_MADT_GIC_VERSION_NONE,
|
|
gic_v2_acpi_init);
|
|
#endif
|