linux/drivers/input/touchscreen/pixcir_i2c_ts.c
Thomas Gleixner 9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00

618 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for Pixcir I2C touchscreen controllers.
*
* Copyright (C) 2010-2011 Pixcir, Inc.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/platform_data/pixcir_i2c_ts.h>
#include <asm/unaligned.h>
#define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */
struct pixcir_i2c_ts_data {
struct i2c_client *client;
struct input_dev *input;
struct gpio_desc *gpio_attb;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_enable;
struct gpio_desc *gpio_wake;
const struct pixcir_i2c_chip_data *chip;
struct touchscreen_properties prop;
int max_fingers; /* Max fingers supported in this instance */
bool running;
};
struct pixcir_report_data {
int num_touches;
struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
int ids[PIXCIR_MAX_SLOTS];
};
static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
struct pixcir_report_data *report)
{
u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5];
u8 wrbuf[1] = { 0 };
u8 *bufptr;
u8 touch;
int ret, i;
int readsize;
const struct pixcir_i2c_chip_data *chip = tsdata->chip;
memset(report, 0, sizeof(struct pixcir_report_data));
i = chip->has_hw_ids ? 1 : 0;
readsize = 2 + tsdata->max_fingers * (4 + i);
if (readsize > sizeof(rdbuf))
readsize = sizeof(rdbuf);
ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
if (ret != sizeof(wrbuf)) {
dev_err(&tsdata->client->dev,
"%s: i2c_master_send failed(), ret=%d\n",
__func__, ret);
return;
}
ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
if (ret != readsize) {
dev_err(&tsdata->client->dev,
"%s: i2c_master_recv failed(), ret=%d\n",
__func__, ret);
return;
}
touch = rdbuf[0] & 0x7;
if (touch > tsdata->max_fingers)
touch = tsdata->max_fingers;
report->num_touches = touch;
bufptr = &rdbuf[2];
for (i = 0; i < touch; i++) {
touchscreen_set_mt_pos(&report->pos[i], &tsdata->prop,
get_unaligned_le16(bufptr),
get_unaligned_le16(bufptr + 2));
if (chip->has_hw_ids) {
report->ids[i] = bufptr[4];
bufptr = bufptr + 5;
} else {
bufptr = bufptr + 4;
}
}
}
static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
struct pixcir_report_data *report)
{
int slots[PIXCIR_MAX_SLOTS];
int n, i, slot;
struct device *dev = &ts->client->dev;
const struct pixcir_i2c_chip_data *chip = ts->chip;
n = report->num_touches;
if (n > PIXCIR_MAX_SLOTS)
n = PIXCIR_MAX_SLOTS;
if (!ts->chip->has_hw_ids)
input_mt_assign_slots(ts->input, slots, report->pos, n, 0);
for (i = 0; i < n; i++) {
if (chip->has_hw_ids) {
slot = input_mt_get_slot_by_key(ts->input,
report->ids[i]);
if (slot < 0) {
dev_dbg(dev, "no free slot for id 0x%x\n",
report->ids[i]);
continue;
}
} else {
slot = slots[i];
}
input_mt_slot(ts->input, slot);
input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
input_report_abs(ts->input, ABS_MT_POSITION_X,
report->pos[i].x);
input_report_abs(ts->input, ABS_MT_POSITION_Y,
report->pos[i].y);
dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
i, slot, report->pos[i].x, report->pos[i].y);
}
input_mt_sync_frame(ts->input);
input_sync(ts->input);
}
static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
{
struct pixcir_i2c_ts_data *tsdata = dev_id;
struct pixcir_report_data report;
while (tsdata->running) {
/* parse packet */
pixcir_ts_parse(tsdata, &report);
/* report it */
pixcir_ts_report(tsdata, &report);
if (gpiod_get_value_cansleep(tsdata->gpio_attb)) {
if (report.num_touches) {
/*
* Last report with no finger up?
* Do it now then.
*/
input_mt_sync_frame(tsdata->input);
input_sync(tsdata->input);
}
break;
}
msleep(20);
}
return IRQ_HANDLED;
}
static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata)
{
if (!IS_ERR_OR_NULL(tsdata->gpio_reset)) {
gpiod_set_value_cansleep(tsdata->gpio_reset, 1);
ndelay(100); /* datasheet section 1.2.3 says 80ns min. */
gpiod_set_value_cansleep(tsdata->gpio_reset, 0);
/* wait for controller ready. 100ms guess. */
msleep(100);
}
}
static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
enum pixcir_power_mode mode)
{
struct device *dev = &ts->client->dev;
int ret;
if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
if (ts->gpio_wake)
gpiod_set_value_cansleep(ts->gpio_wake, 1);
}
ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
if (ret < 0) {
dev_err(dev, "%s: can't read reg 0x%x : %d\n",
__func__, PIXCIR_REG_POWER_MODE, ret);
return ret;
}
ret &= ~PIXCIR_POWER_MODE_MASK;
ret |= mode;
/* Always AUTO_IDLE */
ret |= PIXCIR_POWER_ALLOW_IDLE;
ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret);
if (ret < 0) {
dev_err(dev, "%s: can't write reg 0x%x : %d\n",
__func__, PIXCIR_REG_POWER_MODE, ret);
return ret;
}
if (mode == PIXCIR_POWER_HALT) {
if (ts->gpio_wake)
gpiod_set_value_cansleep(ts->gpio_wake, 0);
}
return 0;
}
/*
* Set the interrupt mode for the device i.e. ATTB line behaviour
*
* @polarity : 1 for active high, 0 for active low.
*/
static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts,
enum pixcir_int_mode mode, bool polarity)
{
struct device *dev = &ts->client->dev;
int ret;
ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
if (ret < 0) {
dev_err(dev, "%s: can't read reg 0x%x : %d\n",
__func__, PIXCIR_REG_INT_MODE, ret);
return ret;
}
ret &= ~PIXCIR_INT_MODE_MASK;
ret |= mode;
if (polarity)
ret |= PIXCIR_INT_POL_HIGH;
else
ret &= ~PIXCIR_INT_POL_HIGH;
ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
if (ret < 0) {
dev_err(dev, "%s: can't write reg 0x%x : %d\n",
__func__, PIXCIR_REG_INT_MODE, ret);
return ret;
}
return 0;
}
/*
* Enable/disable interrupt generation
*/
static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable)
{
struct device *dev = &ts->client->dev;
int ret;
ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
if (ret < 0) {
dev_err(dev, "%s: can't read reg 0x%x : %d\n",
__func__, PIXCIR_REG_INT_MODE, ret);
return ret;
}
if (enable)
ret |= PIXCIR_INT_ENABLE;
else
ret &= ~PIXCIR_INT_ENABLE;
ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
if (ret < 0) {
dev_err(dev, "%s: can't write reg 0x%x : %d\n",
__func__, PIXCIR_REG_INT_MODE, ret);
return ret;
}
return 0;
}
static int pixcir_start(struct pixcir_i2c_ts_data *ts)
{
struct device *dev = &ts->client->dev;
int error;
if (ts->gpio_enable) {
gpiod_set_value_cansleep(ts->gpio_enable, 1);
msleep(100);
}
/* LEVEL_TOUCH interrupt with active low polarity */
error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
if (error) {
dev_err(dev, "Failed to set interrupt mode: %d\n", error);
return error;
}
ts->running = true;
mb(); /* Update status before IRQ can fire */
/* enable interrupt generation */
error = pixcir_int_enable(ts, true);
if (error) {
dev_err(dev, "Failed to enable interrupt generation: %d\n",
error);
return error;
}
return 0;
}
static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
{
int error;
/* Disable interrupt generation */
error = pixcir_int_enable(ts, false);
if (error) {
dev_err(&ts->client->dev,
"Failed to disable interrupt generation: %d\n",
error);
return error;
}
/* Exit ISR if running, no more report parsing */
ts->running = false;
mb(); /* update status before we synchronize irq */
/* Wait till running ISR is complete */
synchronize_irq(ts->client->irq);
if (ts->gpio_enable)
gpiod_set_value_cansleep(ts->gpio_enable, 0);
return 0;
}
static int pixcir_input_open(struct input_dev *dev)
{
struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
return pixcir_start(ts);
}
static void pixcir_input_close(struct input_dev *dev)
{
struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
pixcir_stop(ts);
}
static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
struct input_dev *input = ts->input;
int ret = 0;
mutex_lock(&input->mutex);
if (device_may_wakeup(&client->dev)) {
if (!input->users) {
ret = pixcir_start(ts);
if (ret) {
dev_err(dev, "Failed to start\n");
goto unlock;
}
}
} else if (input->users) {
ret = pixcir_stop(ts);
}
unlock:
mutex_unlock(&input->mutex);
return ret;
}
static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
struct input_dev *input = ts->input;
int ret = 0;
mutex_lock(&input->mutex);
if (device_may_wakeup(&client->dev)) {
if (!input->users) {
ret = pixcir_stop(ts);
if (ret) {
dev_err(dev, "Failed to stop\n");
goto unlock;
}
}
} else if (input->users) {
ret = pixcir_start(ts);
}
unlock:
mutex_unlock(&input->mutex);
return ret;
}
static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
#ifdef CONFIG_OF
static const struct of_device_id pixcir_of_match[];
static int pixcir_parse_dt(struct device *dev,
struct pixcir_i2c_ts_data *tsdata)
{
tsdata->chip = of_device_get_match_data(dev);
if (!tsdata->chip)
return -EINVAL;
return 0;
}
#else
static int pixcir_parse_dt(struct device *dev,
struct pixcir_i2c_ts_data *tsdata)
{
return -EINVAL;
}
#endif
static int pixcir_i2c_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct pixcir_ts_platform_data *pdata =
dev_get_platdata(&client->dev);
struct device *dev = &client->dev;
struct pixcir_i2c_ts_data *tsdata;
struct input_dev *input;
int error;
tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
if (!tsdata)
return -ENOMEM;
if (pdata) {
tsdata->chip = &pdata->chip;
} else if (dev->of_node) {
error = pixcir_parse_dt(dev, tsdata);
if (error)
return error;
} else {
dev_err(dev, "platform data not defined\n");
return -EINVAL;
}
if (!tsdata->chip->max_fingers) {
dev_err(dev, "Invalid max_fingers in chip data\n");
return -EINVAL;
}
input = devm_input_allocate_device(dev);
if (!input) {
dev_err(dev, "Failed to allocate input device\n");
return -ENOMEM;
}
tsdata->client = client;
tsdata->input = input;
input->name = client->name;
input->id.bustype = BUS_I2C;
input->open = pixcir_input_open;
input->close = pixcir_input_close;
input->dev.parent = dev;
if (pdata) {
input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
} else {
input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
touchscreen_parse_properties(input, true, &tsdata->prop);
if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
!input_abs_get_max(input, ABS_MT_POSITION_Y)) {
dev_err(dev, "Touchscreen size is not specified\n");
return -EINVAL;
}
}
tsdata->max_fingers = tsdata->chip->max_fingers;
if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) {
tsdata->max_fingers = PIXCIR_MAX_SLOTS;
dev_info(dev, "Limiting maximum fingers to %d\n",
tsdata->max_fingers);
}
error = input_mt_init_slots(input, tsdata->max_fingers,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
if (error) {
dev_err(dev, "Error initializing Multi-Touch slots\n");
return error;
}
input_set_drvdata(input, tsdata);
tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN);
if (IS_ERR(tsdata->gpio_attb)) {
error = PTR_ERR(tsdata->gpio_attb);
dev_err(dev, "Failed to request ATTB gpio: %d\n", error);
return error;
}
tsdata->gpio_reset = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(tsdata->gpio_reset)) {
error = PTR_ERR(tsdata->gpio_reset);
dev_err(dev, "Failed to request RESET gpio: %d\n", error);
return error;
}
tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake",
GPIOD_OUT_HIGH);
if (IS_ERR(tsdata->gpio_wake)) {
error = PTR_ERR(tsdata->gpio_wake);
if (error != -EPROBE_DEFER)
dev_err(dev, "Failed to get wake gpio: %d\n", error);
return error;
}
tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_HIGH);
if (IS_ERR(tsdata->gpio_enable)) {
error = PTR_ERR(tsdata->gpio_enable);
if (error != -EPROBE_DEFER)
dev_err(dev, "Failed to get enable gpio: %d\n", error);
return error;
}
if (tsdata->gpio_enable)
msleep(100);
error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
if (error) {
dev_err(dev, "failed to request irq %d\n", client->irq);
return error;
}
pixcir_reset(tsdata);
/* Always be in IDLE mode to save power, device supports auto wake */
error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
if (error) {
dev_err(dev, "Failed to set IDLE mode\n");
return error;
}
/* Stop device till opened */
error = pixcir_stop(tsdata);
if (error)
return error;
error = input_register_device(input);
if (error)
return error;
i2c_set_clientdata(client, tsdata);
return 0;
}
static const struct i2c_device_id pixcir_i2c_ts_id[] = {
{ "pixcir_ts", 0 },
{ "pixcir_tangoc", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
#ifdef CONFIG_OF
static const struct pixcir_i2c_chip_data pixcir_ts_data = {
.max_fingers = 2,
/* no hw id support */
};
static const struct pixcir_i2c_chip_data pixcir_tangoc_data = {
.max_fingers = 5,
.has_hw_ids = true,
};
static const struct of_device_id pixcir_of_match[] = {
{ .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data },
{ .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data },
{ }
};
MODULE_DEVICE_TABLE(of, pixcir_of_match);
#endif
static struct i2c_driver pixcir_i2c_ts_driver = {
.driver = {
.name = "pixcir_ts",
.pm = &pixcir_dev_pm_ops,
.of_match_table = of_match_ptr(pixcir_of_match),
},
.probe = pixcir_i2c_ts_probe,
.id_table = pixcir_i2c_ts_id,
};
module_i2c_driver(pixcir_i2c_ts_driver);
MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
MODULE_LICENSE("GPL");