mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 19:31:53 +00:00
da3cc679b2
Problem description: -------------------- The issue reported by one of the customer was able to read LBA beyond the array reported size with "sg_read" utility. If N is the last block address reported, then should not be able to read past N, i.e. N+1. But in their case, reported last LBA=143134719. So should not have been able to read with LBA=143134720, but it is read without failure, which means reported size to the OS is not correct and is less than the actual last block address. Solution: --------- Firmware layer exposes lesser container capacity than the actual one. It exposes [Actual size - Spitfire space(10MB)] to the OS, IO's to the 10MB should be prohibited from the Linux driver. Driver checks LBA boundary, if its greater than the array reported size then sets sensekey to HARDWARE_ERROR and sends the notification to the MID layer. Signed-off-by: Mahesh Rajashekhara <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
3004 lines
85 KiB
C
3004 lines
85 KiB
C
/*
|
|
* Adaptec AAC series RAID controller driver
|
|
* (c) Copyright 2001 Red Hat Inc.
|
|
*
|
|
* based on the old aacraid driver that is..
|
|
* Adaptec aacraid device driver for Linux.
|
|
*
|
|
* Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/blkdev.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/highmem.h> /* For flush_kernel_dcache_page */
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "aacraid.h"
|
|
|
|
/* values for inqd_pdt: Peripheral device type in plain English */
|
|
#define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
|
|
#define INQD_PDT_PROC 0x03 /* Processor device */
|
|
#define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
|
|
#define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
|
|
#define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
|
|
#define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
|
|
|
|
#define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
|
|
#define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
|
|
|
|
/*
|
|
* Sense codes
|
|
*/
|
|
|
|
#define SENCODE_NO_SENSE 0x00
|
|
#define SENCODE_END_OF_DATA 0x00
|
|
#define SENCODE_BECOMING_READY 0x04
|
|
#define SENCODE_INIT_CMD_REQUIRED 0x04
|
|
#define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
|
|
#define SENCODE_INVALID_COMMAND 0x20
|
|
#define SENCODE_LBA_OUT_OF_RANGE 0x21
|
|
#define SENCODE_INVALID_CDB_FIELD 0x24
|
|
#define SENCODE_LUN_NOT_SUPPORTED 0x25
|
|
#define SENCODE_INVALID_PARAM_FIELD 0x26
|
|
#define SENCODE_PARAM_NOT_SUPPORTED 0x26
|
|
#define SENCODE_PARAM_VALUE_INVALID 0x26
|
|
#define SENCODE_RESET_OCCURRED 0x29
|
|
#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
|
|
#define SENCODE_INQUIRY_DATA_CHANGED 0x3F
|
|
#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
|
|
#define SENCODE_DIAGNOSTIC_FAILURE 0x40
|
|
#define SENCODE_INTERNAL_TARGET_FAILURE 0x44
|
|
#define SENCODE_INVALID_MESSAGE_ERROR 0x49
|
|
#define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
|
|
#define SENCODE_OVERLAPPED_COMMAND 0x4E
|
|
|
|
/*
|
|
* Additional sense codes
|
|
*/
|
|
|
|
#define ASENCODE_NO_SENSE 0x00
|
|
#define ASENCODE_END_OF_DATA 0x05
|
|
#define ASENCODE_BECOMING_READY 0x01
|
|
#define ASENCODE_INIT_CMD_REQUIRED 0x02
|
|
#define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
|
|
#define ASENCODE_INVALID_COMMAND 0x00
|
|
#define ASENCODE_LBA_OUT_OF_RANGE 0x00
|
|
#define ASENCODE_INVALID_CDB_FIELD 0x00
|
|
#define ASENCODE_LUN_NOT_SUPPORTED 0x00
|
|
#define ASENCODE_INVALID_PARAM_FIELD 0x00
|
|
#define ASENCODE_PARAM_NOT_SUPPORTED 0x01
|
|
#define ASENCODE_PARAM_VALUE_INVALID 0x02
|
|
#define ASENCODE_RESET_OCCURRED 0x00
|
|
#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
|
|
#define ASENCODE_INQUIRY_DATA_CHANGED 0x03
|
|
#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
|
|
#define ASENCODE_DIAGNOSTIC_FAILURE 0x80
|
|
#define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
|
|
#define ASENCODE_INVALID_MESSAGE_ERROR 0x00
|
|
#define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
|
|
#define ASENCODE_OVERLAPPED_COMMAND 0x00
|
|
|
|
#define BYTE0(x) (unsigned char)(x)
|
|
#define BYTE1(x) (unsigned char)((x) >> 8)
|
|
#define BYTE2(x) (unsigned char)((x) >> 16)
|
|
#define BYTE3(x) (unsigned char)((x) >> 24)
|
|
|
|
/*------------------------------------------------------------------------------
|
|
* S T R U C T S / T Y P E D E F S
|
|
*----------------------------------------------------------------------------*/
|
|
/* SCSI inquiry data */
|
|
struct inquiry_data {
|
|
u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */
|
|
u8 inqd_dtq; /* RMB | Device Type Qualifier */
|
|
u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */
|
|
u8 inqd_rdf; /* AENC | TrmIOP | Response data format */
|
|
u8 inqd_len; /* Additional length (n-4) */
|
|
u8 inqd_pad1[2];/* Reserved - must be zero */
|
|
u8 inqd_pad2; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
|
|
u8 inqd_vid[8]; /* Vendor ID */
|
|
u8 inqd_pid[16];/* Product ID */
|
|
u8 inqd_prl[4]; /* Product Revision Level */
|
|
};
|
|
|
|
/*
|
|
* M O D U L E G L O B A L S
|
|
*/
|
|
|
|
static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap);
|
|
static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg);
|
|
static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg);
|
|
static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
|
|
#ifdef AAC_DETAILED_STATUS_INFO
|
|
static char *aac_get_status_string(u32 status);
|
|
#endif
|
|
|
|
/*
|
|
* Non dasd selection is handled entirely in aachba now
|
|
*/
|
|
|
|
static int nondasd = -1;
|
|
static int aac_cache = 2; /* WCE=0 to avoid performance problems */
|
|
static int dacmode = -1;
|
|
int aac_msi;
|
|
int aac_commit = -1;
|
|
int startup_timeout = 180;
|
|
int aif_timeout = 120;
|
|
|
|
module_param(nondasd, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
|
|
" 0=off, 1=on");
|
|
module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
|
|
"\tbit 0 - Disable FUA in WRITE SCSI commands\n"
|
|
"\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
|
|
"\tbit 2 - Disable only if Battery is protecting Cache");
|
|
module_param(dacmode, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
|
|
" 0=off, 1=on");
|
|
module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
|
|
" adapter for foreign arrays.\n"
|
|
"This is typically needed in systems that do not have a BIOS."
|
|
" 0=off, 1=on");
|
|
module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(msi, "IRQ handling."
|
|
" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
|
|
module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
|
|
" adapter to have it's kernel up and\n"
|
|
"running. This is typically adjusted for large systems that do not"
|
|
" have a BIOS.");
|
|
module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
|
|
" applications to pick up AIFs before\n"
|
|
"deregistering them. This is typically adjusted for heavily burdened"
|
|
" systems.");
|
|
|
|
int numacb = -1;
|
|
module_param(numacb, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
|
|
" blocks (FIB) allocated. Valid values are 512 and down. Default is"
|
|
" to use suggestion from Firmware.");
|
|
|
|
int acbsize = -1;
|
|
module_param(acbsize, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
|
|
" size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
|
|
" suggestion from Firmware.");
|
|
|
|
int update_interval = 30 * 60;
|
|
module_param(update_interval, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
|
|
" updates issued to adapter.");
|
|
|
|
int check_interval = 24 * 60 * 60;
|
|
module_param(check_interval, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
|
|
" checks.");
|
|
|
|
int aac_check_reset = 1;
|
|
module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the"
|
|
" adapter. a value of -1 forces the reset to adapters programmed to"
|
|
" ignore it.");
|
|
|
|
int expose_physicals = -1;
|
|
module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
|
|
" -1=protect 0=off, 1=on");
|
|
|
|
int aac_reset_devices;
|
|
module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
|
|
|
|
int aac_wwn = 1;
|
|
module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR);
|
|
MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n"
|
|
"\t0 - Disable\n"
|
|
"\t1 - Array Meta Data Signature (default)\n"
|
|
"\t2 - Adapter Serial Number");
|
|
|
|
|
|
static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
|
|
struct fib *fibptr) {
|
|
struct scsi_device *device;
|
|
|
|
if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
|
|
dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
return 0;
|
|
}
|
|
scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
|
|
device = scsicmd->device;
|
|
if (unlikely(!device || !scsi_device_online(device))) {
|
|
dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* aac_get_config_status - check the adapter configuration
|
|
* @common: adapter to query
|
|
*
|
|
* Query config status, and commit the configuration if needed.
|
|
*/
|
|
int aac_get_config_status(struct aac_dev *dev, int commit_flag)
|
|
{
|
|
int status = 0;
|
|
struct fib * fibptr;
|
|
|
|
if (!(fibptr = aac_fib_alloc(dev)))
|
|
return -ENOMEM;
|
|
|
|
aac_fib_init(fibptr);
|
|
{
|
|
struct aac_get_config_status *dinfo;
|
|
dinfo = (struct aac_get_config_status *) fib_data(fibptr);
|
|
|
|
dinfo->command = cpu_to_le32(VM_ContainerConfig);
|
|
dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
|
|
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
|
|
}
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof (struct aac_get_config_status),
|
|
FsaNormal,
|
|
1, 1,
|
|
NULL, NULL);
|
|
if (status < 0) {
|
|
printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
|
|
} else {
|
|
struct aac_get_config_status_resp *reply
|
|
= (struct aac_get_config_status_resp *) fib_data(fibptr);
|
|
dprintk((KERN_WARNING
|
|
"aac_get_config_status: response=%d status=%d action=%d\n",
|
|
le32_to_cpu(reply->response),
|
|
le32_to_cpu(reply->status),
|
|
le32_to_cpu(reply->data.action)));
|
|
if ((le32_to_cpu(reply->response) != ST_OK) ||
|
|
(le32_to_cpu(reply->status) != CT_OK) ||
|
|
(le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
|
|
printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
|
|
status = -EINVAL;
|
|
}
|
|
}
|
|
/* Do not set XferState to zero unless receives a response from F/W */
|
|
if (status >= 0)
|
|
aac_fib_complete(fibptr);
|
|
|
|
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
|
|
if (status >= 0) {
|
|
if ((aac_commit == 1) || commit_flag) {
|
|
struct aac_commit_config * dinfo;
|
|
aac_fib_init(fibptr);
|
|
dinfo = (struct aac_commit_config *) fib_data(fibptr);
|
|
|
|
dinfo->command = cpu_to_le32(VM_ContainerConfig);
|
|
dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof (struct aac_commit_config),
|
|
FsaNormal,
|
|
1, 1,
|
|
NULL, NULL);
|
|
/* Do not set XferState to zero unless
|
|
* receives a response from F/W */
|
|
if (status >= 0)
|
|
aac_fib_complete(fibptr);
|
|
} else if (aac_commit == 0) {
|
|
printk(KERN_WARNING
|
|
"aac_get_config_status: Foreign device configurations are being ignored\n");
|
|
}
|
|
}
|
|
/* FIB should be freed only after getting the response from the F/W */
|
|
if (status != -ERESTARTSYS)
|
|
aac_fib_free(fibptr);
|
|
return status;
|
|
}
|
|
|
|
static void aac_expose_phy_device(struct scsi_cmnd *scsicmd)
|
|
{
|
|
char inq_data;
|
|
scsi_sg_copy_to_buffer(scsicmd, &inq_data, sizeof(inq_data));
|
|
if ((inq_data & 0x20) && (inq_data & 0x1f) == TYPE_DISK) {
|
|
inq_data &= 0xdf;
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* aac_get_containers - list containers
|
|
* @common: adapter to probe
|
|
*
|
|
* Make a list of all containers on this controller
|
|
*/
|
|
int aac_get_containers(struct aac_dev *dev)
|
|
{
|
|
struct fsa_dev_info *fsa_dev_ptr;
|
|
u32 index;
|
|
int status = 0;
|
|
struct fib * fibptr;
|
|
struct aac_get_container_count *dinfo;
|
|
struct aac_get_container_count_resp *dresp;
|
|
int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
|
|
|
|
if (!(fibptr = aac_fib_alloc(dev)))
|
|
return -ENOMEM;
|
|
|
|
aac_fib_init(fibptr);
|
|
dinfo = (struct aac_get_container_count *) fib_data(fibptr);
|
|
dinfo->command = cpu_to_le32(VM_ContainerConfig);
|
|
dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof (struct aac_get_container_count),
|
|
FsaNormal,
|
|
1, 1,
|
|
NULL, NULL);
|
|
if (status >= 0) {
|
|
dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
|
|
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
|
|
aac_fib_complete(fibptr);
|
|
}
|
|
/* FIB should be freed only after getting the response from the F/W */
|
|
if (status != -ERESTARTSYS)
|
|
aac_fib_free(fibptr);
|
|
|
|
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
|
|
maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
|
|
fsa_dev_ptr = kzalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
|
|
GFP_KERNEL);
|
|
if (!fsa_dev_ptr)
|
|
return -ENOMEM;
|
|
|
|
dev->fsa_dev = fsa_dev_ptr;
|
|
dev->maximum_num_containers = maximum_num_containers;
|
|
|
|
for (index = 0; index < dev->maximum_num_containers; ) {
|
|
fsa_dev_ptr[index].devname[0] = '\0';
|
|
|
|
status = aac_probe_container(dev, index);
|
|
|
|
if (status < 0) {
|
|
printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If there are no more containers, then stop asking.
|
|
*/
|
|
if (++index >= status)
|
|
break;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static void get_container_name_callback(void *context, struct fib * fibptr)
|
|
{
|
|
struct aac_get_name_resp * get_name_reply;
|
|
struct scsi_cmnd * scsicmd;
|
|
|
|
scsicmd = (struct scsi_cmnd *) context;
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
|
|
/* Failure is irrelevant, using default value instead */
|
|
if ((le32_to_cpu(get_name_reply->status) == CT_OK)
|
|
&& (get_name_reply->data[0] != '\0')) {
|
|
char *sp = get_name_reply->data;
|
|
sp[sizeof(((struct aac_get_name_resp *)NULL)->data)-1] = '\0';
|
|
while (*sp == ' ')
|
|
++sp;
|
|
if (*sp) {
|
|
struct inquiry_data inq;
|
|
char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
|
|
int count = sizeof(d);
|
|
char *dp = d;
|
|
do {
|
|
*dp++ = (*sp) ? *sp++ : ' ';
|
|
} while (--count > 0);
|
|
|
|
scsi_sg_copy_to_buffer(scsicmd, &inq, sizeof(inq));
|
|
memcpy(inq.inqd_pid, d, sizeof(d));
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq, sizeof(inq));
|
|
}
|
|
}
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
scsicmd->scsi_done(scsicmd);
|
|
}
|
|
|
|
/**
|
|
* aac_get_container_name - get container name, none blocking.
|
|
*/
|
|
static int aac_get_container_name(struct scsi_cmnd * scsicmd)
|
|
{
|
|
int status;
|
|
struct aac_get_name *dinfo;
|
|
struct fib * cmd_fibcontext;
|
|
struct aac_dev * dev;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
|
|
if (!(cmd_fibcontext = aac_fib_alloc(dev)))
|
|
return -ENOMEM;
|
|
|
|
aac_fib_init(cmd_fibcontext);
|
|
dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
|
|
|
|
dinfo->command = cpu_to_le32(VM_ContainerConfig);
|
|
dinfo->type = cpu_to_le32(CT_READ_NAME);
|
|
dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
|
|
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
cmd_fibcontext,
|
|
sizeof (struct aac_get_name),
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback)get_container_name_callback,
|
|
(void *) scsicmd);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return -1;
|
|
}
|
|
|
|
static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
|
|
{
|
|
struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
|
|
|
|
if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1))
|
|
return aac_scsi_cmd(scsicmd);
|
|
|
|
scsicmd->result = DID_NO_CONNECT << 16;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
|
|
static void _aac_probe_container2(void * context, struct fib * fibptr)
|
|
{
|
|
struct fsa_dev_info *fsa_dev_ptr;
|
|
int (*callback)(struct scsi_cmnd *);
|
|
struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
|
|
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
scsicmd->SCp.Status = 0;
|
|
fsa_dev_ptr = fibptr->dev->fsa_dev;
|
|
if (fsa_dev_ptr) {
|
|
struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
|
|
fsa_dev_ptr += scmd_id(scsicmd);
|
|
|
|
if ((le32_to_cpu(dresp->status) == ST_OK) &&
|
|
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
|
|
(le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
|
|
fsa_dev_ptr->valid = 1;
|
|
/* sense_key holds the current state of the spin-up */
|
|
if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
|
|
fsa_dev_ptr->sense_data.sense_key = NOT_READY;
|
|
else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
|
|
fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
|
|
fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
|
|
fsa_dev_ptr->size
|
|
= ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
|
|
(((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
|
|
fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
|
|
}
|
|
if ((fsa_dev_ptr->valid & 1) == 0)
|
|
fsa_dev_ptr->valid = 0;
|
|
scsicmd->SCp.Status = le32_to_cpu(dresp->count);
|
|
}
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
|
|
scsicmd->SCp.ptr = NULL;
|
|
(*callback)(scsicmd);
|
|
return;
|
|
}
|
|
|
|
static void _aac_probe_container1(void * context, struct fib * fibptr)
|
|
{
|
|
struct scsi_cmnd * scsicmd;
|
|
struct aac_mount * dresp;
|
|
struct aac_query_mount *dinfo;
|
|
int status;
|
|
|
|
dresp = (struct aac_mount *) fib_data(fibptr);
|
|
dresp->mnt[0].capacityhigh = 0;
|
|
if ((le32_to_cpu(dresp->status) != ST_OK) ||
|
|
(le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) {
|
|
_aac_probe_container2(context, fibptr);
|
|
return;
|
|
}
|
|
scsicmd = (struct scsi_cmnd *) context;
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
aac_fib_init(fibptr);
|
|
|
|
dinfo = (struct aac_query_mount *)fib_data(fibptr);
|
|
|
|
dinfo->command = cpu_to_le32(VM_NameServe64);
|
|
dinfo->count = cpu_to_le32(scmd_id(scsicmd));
|
|
dinfo->type = cpu_to_le32(FT_FILESYS);
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof(struct aac_query_mount),
|
|
FsaNormal,
|
|
0, 1,
|
|
_aac_probe_container2,
|
|
(void *) scsicmd);
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS)
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
else if (status < 0) {
|
|
/* Inherit results from VM_NameServe, if any */
|
|
dresp->status = cpu_to_le32(ST_OK);
|
|
_aac_probe_container2(context, fibptr);
|
|
}
|
|
}
|
|
|
|
static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
|
|
{
|
|
struct fib * fibptr;
|
|
int status = -ENOMEM;
|
|
|
|
if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
|
|
struct aac_query_mount *dinfo;
|
|
|
|
aac_fib_init(fibptr);
|
|
|
|
dinfo = (struct aac_query_mount *)fib_data(fibptr);
|
|
|
|
dinfo->command = cpu_to_le32(VM_NameServe);
|
|
dinfo->count = cpu_to_le32(scmd_id(scsicmd));
|
|
dinfo->type = cpu_to_le32(FT_FILESYS);
|
|
scsicmd->SCp.ptr = (char *)callback;
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof(struct aac_query_mount),
|
|
FsaNormal,
|
|
0, 1,
|
|
_aac_probe_container1,
|
|
(void *) scsicmd);
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
if (status < 0) {
|
|
scsicmd->SCp.ptr = NULL;
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
}
|
|
}
|
|
if (status < 0) {
|
|
struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
|
|
if (fsa_dev_ptr) {
|
|
fsa_dev_ptr += scmd_id(scsicmd);
|
|
if ((fsa_dev_ptr->valid & 1) == 0) {
|
|
fsa_dev_ptr->valid = 0;
|
|
return (*callback)(scsicmd);
|
|
}
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* aac_probe_container - query a logical volume
|
|
* @dev: device to query
|
|
* @cid: container identifier
|
|
*
|
|
* Queries the controller about the given volume. The volume information
|
|
* is updated in the struct fsa_dev_info structure rather than returned.
|
|
*/
|
|
static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
|
|
{
|
|
scsicmd->device = NULL;
|
|
return 0;
|
|
}
|
|
|
|
int aac_probe_container(struct aac_dev *dev, int cid)
|
|
{
|
|
struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
|
|
struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
|
|
int status;
|
|
|
|
if (!scsicmd || !scsidev) {
|
|
kfree(scsicmd);
|
|
kfree(scsidev);
|
|
return -ENOMEM;
|
|
}
|
|
scsicmd->list.next = NULL;
|
|
scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
|
|
|
|
scsicmd->device = scsidev;
|
|
scsidev->sdev_state = 0;
|
|
scsidev->id = cid;
|
|
scsidev->host = dev->scsi_host_ptr;
|
|
|
|
if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
|
|
while (scsicmd->device == scsidev)
|
|
schedule();
|
|
kfree(scsidev);
|
|
status = scsicmd->SCp.Status;
|
|
kfree(scsicmd);
|
|
return status;
|
|
}
|
|
|
|
/* Local Structure to set SCSI inquiry data strings */
|
|
struct scsi_inq {
|
|
char vid[8]; /* Vendor ID */
|
|
char pid[16]; /* Product ID */
|
|
char prl[4]; /* Product Revision Level */
|
|
};
|
|
|
|
/**
|
|
* InqStrCopy - string merge
|
|
* @a: string to copy from
|
|
* @b: string to copy to
|
|
*
|
|
* Copy a String from one location to another
|
|
* without copying \0
|
|
*/
|
|
|
|
static void inqstrcpy(char *a, char *b)
|
|
{
|
|
|
|
while (*a != (char)0)
|
|
*b++ = *a++;
|
|
}
|
|
|
|
static char *container_types[] = {
|
|
"None",
|
|
"Volume",
|
|
"Mirror",
|
|
"Stripe",
|
|
"RAID5",
|
|
"SSRW",
|
|
"SSRO",
|
|
"Morph",
|
|
"Legacy",
|
|
"RAID4",
|
|
"RAID10",
|
|
"RAID00",
|
|
"V-MIRRORS",
|
|
"PSEUDO R4",
|
|
"RAID50",
|
|
"RAID5D",
|
|
"RAID5D0",
|
|
"RAID1E",
|
|
"RAID6",
|
|
"RAID60",
|
|
"Unknown"
|
|
};
|
|
|
|
char * get_container_type(unsigned tindex)
|
|
{
|
|
if (tindex >= ARRAY_SIZE(container_types))
|
|
tindex = ARRAY_SIZE(container_types) - 1;
|
|
return container_types[tindex];
|
|
}
|
|
|
|
/* Function: setinqstr
|
|
*
|
|
* Arguments: [1] pointer to void [1] int
|
|
*
|
|
* Purpose: Sets SCSI inquiry data strings for vendor, product
|
|
* and revision level. Allows strings to be set in platform dependant
|
|
* files instead of in OS dependant driver source.
|
|
*/
|
|
|
|
static void setinqstr(struct aac_dev *dev, void *data, int tindex)
|
|
{
|
|
struct scsi_inq *str;
|
|
|
|
str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
|
|
memset(str, ' ', sizeof(*str));
|
|
|
|
if (dev->supplement_adapter_info.AdapterTypeText[0]) {
|
|
char * cp = dev->supplement_adapter_info.AdapterTypeText;
|
|
int c;
|
|
if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
|
|
inqstrcpy("SMC", str->vid);
|
|
else {
|
|
c = sizeof(str->vid);
|
|
while (*cp && *cp != ' ' && --c)
|
|
++cp;
|
|
c = *cp;
|
|
*cp = '\0';
|
|
inqstrcpy (dev->supplement_adapter_info.AdapterTypeText,
|
|
str->vid);
|
|
*cp = c;
|
|
while (*cp && *cp != ' ')
|
|
++cp;
|
|
}
|
|
while (*cp == ' ')
|
|
++cp;
|
|
/* last six chars reserved for vol type */
|
|
c = 0;
|
|
if (strlen(cp) > sizeof(str->pid)) {
|
|
c = cp[sizeof(str->pid)];
|
|
cp[sizeof(str->pid)] = '\0';
|
|
}
|
|
inqstrcpy (cp, str->pid);
|
|
if (c)
|
|
cp[sizeof(str->pid)] = c;
|
|
} else {
|
|
struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
|
|
|
|
inqstrcpy (mp->vname, str->vid);
|
|
/* last six chars reserved for vol type */
|
|
inqstrcpy (mp->model, str->pid);
|
|
}
|
|
|
|
if (tindex < ARRAY_SIZE(container_types)){
|
|
char *findit = str->pid;
|
|
|
|
for ( ; *findit != ' '; findit++); /* walk till we find a space */
|
|
/* RAID is superfluous in the context of a RAID device */
|
|
if (memcmp(findit-4, "RAID", 4) == 0)
|
|
*(findit -= 4) = ' ';
|
|
if (((findit - str->pid) + strlen(container_types[tindex]))
|
|
< (sizeof(str->pid) + sizeof(str->prl)))
|
|
inqstrcpy (container_types[tindex], findit + 1);
|
|
}
|
|
inqstrcpy ("V1.0", str->prl);
|
|
}
|
|
|
|
static void get_container_serial_callback(void *context, struct fib * fibptr)
|
|
{
|
|
struct aac_get_serial_resp * get_serial_reply;
|
|
struct scsi_cmnd * scsicmd;
|
|
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
scsicmd = (struct scsi_cmnd *) context;
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
get_serial_reply = (struct aac_get_serial_resp *) fib_data(fibptr);
|
|
/* Failure is irrelevant, using default value instead */
|
|
if (le32_to_cpu(get_serial_reply->status) == CT_OK) {
|
|
char sp[13];
|
|
/* EVPD bit set */
|
|
sp[0] = INQD_PDT_DA;
|
|
sp[1] = scsicmd->cmnd[2];
|
|
sp[2] = 0;
|
|
sp[3] = snprintf(sp+4, sizeof(sp)-4, "%08X",
|
|
le32_to_cpu(get_serial_reply->uid));
|
|
scsi_sg_copy_from_buffer(scsicmd, sp, sizeof(sp));
|
|
}
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
scsicmd->scsi_done(scsicmd);
|
|
}
|
|
|
|
/**
|
|
* aac_get_container_serial - get container serial, none blocking.
|
|
*/
|
|
static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
|
|
{
|
|
int status;
|
|
struct aac_get_serial *dinfo;
|
|
struct fib * cmd_fibcontext;
|
|
struct aac_dev * dev;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
|
|
if (!(cmd_fibcontext = aac_fib_alloc(dev)))
|
|
return -ENOMEM;
|
|
|
|
aac_fib_init(cmd_fibcontext);
|
|
dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
|
|
|
|
dinfo->command = cpu_to_le32(VM_ContainerConfig);
|
|
dinfo->type = cpu_to_le32(CT_CID_TO_32BITS_UID);
|
|
dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
|
|
|
|
status = aac_fib_send(ContainerCommand,
|
|
cmd_fibcontext,
|
|
sizeof (struct aac_get_serial),
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) get_container_serial_callback,
|
|
(void *) scsicmd);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return -1;
|
|
}
|
|
|
|
/* Function: setinqserial
|
|
*
|
|
* Arguments: [1] pointer to void [1] int
|
|
*
|
|
* Purpose: Sets SCSI Unit Serial number.
|
|
* This is a fake. We should read a proper
|
|
* serial number from the container. <SuSE>But
|
|
* without docs it's quite hard to do it :-)
|
|
* So this will have to do in the meantime.</SuSE>
|
|
*/
|
|
|
|
static int setinqserial(struct aac_dev *dev, void *data, int cid)
|
|
{
|
|
/*
|
|
* This breaks array migration.
|
|
*/
|
|
return snprintf((char *)(data), sizeof(struct scsi_inq) - 4, "%08X%02X",
|
|
le32_to_cpu(dev->adapter_info.serial[0]), cid);
|
|
}
|
|
|
|
static inline void set_sense(struct sense_data *sense_data, u8 sense_key,
|
|
u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer)
|
|
{
|
|
u8 *sense_buf = (u8 *)sense_data;
|
|
/* Sense data valid, err code 70h */
|
|
sense_buf[0] = 0x70; /* No info field */
|
|
sense_buf[1] = 0; /* Segment number, always zero */
|
|
|
|
sense_buf[2] = sense_key; /* Sense key */
|
|
|
|
sense_buf[12] = sense_code; /* Additional sense code */
|
|
sense_buf[13] = a_sense_code; /* Additional sense code qualifier */
|
|
|
|
if (sense_key == ILLEGAL_REQUEST) {
|
|
sense_buf[7] = 10; /* Additional sense length */
|
|
|
|
sense_buf[15] = bit_pointer;
|
|
/* Illegal parameter is in the parameter block */
|
|
if (sense_code == SENCODE_INVALID_CDB_FIELD)
|
|
sense_buf[15] |= 0xc0;/* Std sense key specific field */
|
|
/* Illegal parameter is in the CDB block */
|
|
sense_buf[16] = field_pointer >> 8; /* MSB */
|
|
sense_buf[17] = field_pointer; /* LSB */
|
|
} else
|
|
sense_buf[7] = 6; /* Additional sense length */
|
|
}
|
|
|
|
static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
|
|
{
|
|
if (lba & 0xffffffff00000000LL) {
|
|
int cid = scmd_id(cmd);
|
|
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
|
|
cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
|
|
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
|
|
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
cmd->scsi_done(cmd);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void io_callback(void *context, struct fib * fibptr);
|
|
|
|
static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_raw_io *readcmd;
|
|
aac_fib_init(fib);
|
|
readcmd = (struct aac_raw_io *) fib_data(fib);
|
|
readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
|
|
readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
|
|
readcmd->count = cpu_to_le32(count<<9);
|
|
readcmd->cid = cpu_to_le16(scmd_id(cmd));
|
|
readcmd->flags = cpu_to_le16(IO_TYPE_READ);
|
|
readcmd->bpTotal = 0;
|
|
readcmd->bpComplete = 0;
|
|
|
|
aac_build_sgraw(cmd, &readcmd->sg);
|
|
fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(readcmd->sg.count) - 1) * sizeof (struct sgentryraw));
|
|
BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerRawIo,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_read64 *readcmd;
|
|
aac_fib_init(fib);
|
|
readcmd = (struct aac_read64 *) fib_data(fib);
|
|
readcmd->command = cpu_to_le32(VM_CtHostRead64);
|
|
readcmd->cid = cpu_to_le16(scmd_id(cmd));
|
|
readcmd->sector_count = cpu_to_le16(count);
|
|
readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
|
|
readcmd->pad = 0;
|
|
readcmd->flags = 0;
|
|
|
|
aac_build_sg64(cmd, &readcmd->sg);
|
|
fibsize = sizeof(struct aac_read64) +
|
|
((le32_to_cpu(readcmd->sg.count) - 1) *
|
|
sizeof (struct sgentry64));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerCommand64,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_read *readcmd;
|
|
aac_fib_init(fib);
|
|
readcmd = (struct aac_read *) fib_data(fib);
|
|
readcmd->command = cpu_to_le32(VM_CtBlockRead);
|
|
readcmd->cid = cpu_to_le32(scmd_id(cmd));
|
|
readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
|
|
readcmd->count = cpu_to_le32(count * 512);
|
|
|
|
aac_build_sg(cmd, &readcmd->sg);
|
|
fibsize = sizeof(struct aac_read) +
|
|
((le32_to_cpu(readcmd->sg.count) - 1) *
|
|
sizeof (struct sgentry));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerCommand,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_raw_io *writecmd;
|
|
aac_fib_init(fib);
|
|
writecmd = (struct aac_raw_io *) fib_data(fib);
|
|
writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
|
|
writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
|
|
writecmd->count = cpu_to_le32(count<<9);
|
|
writecmd->cid = cpu_to_le16(scmd_id(cmd));
|
|
writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
|
|
(((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
|
|
cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) :
|
|
cpu_to_le16(IO_TYPE_WRITE);
|
|
writecmd->bpTotal = 0;
|
|
writecmd->bpComplete = 0;
|
|
|
|
aac_build_sgraw(cmd, &writecmd->sg);
|
|
fibsize = sizeof(struct aac_raw_io) + ((le32_to_cpu(writecmd->sg.count) - 1) * sizeof (struct sgentryraw));
|
|
BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerRawIo,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_write64 *writecmd;
|
|
aac_fib_init(fib);
|
|
writecmd = (struct aac_write64 *) fib_data(fib);
|
|
writecmd->command = cpu_to_le32(VM_CtHostWrite64);
|
|
writecmd->cid = cpu_to_le16(scmd_id(cmd));
|
|
writecmd->sector_count = cpu_to_le16(count);
|
|
writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
|
|
writecmd->pad = 0;
|
|
writecmd->flags = 0;
|
|
|
|
aac_build_sg64(cmd, &writecmd->sg);
|
|
fibsize = sizeof(struct aac_write64) +
|
|
((le32_to_cpu(writecmd->sg.count) - 1) *
|
|
sizeof (struct sgentry64));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerCommand64,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_write *writecmd;
|
|
aac_fib_init(fib);
|
|
writecmd = (struct aac_write *) fib_data(fib);
|
|
writecmd->command = cpu_to_le32(VM_CtBlockWrite);
|
|
writecmd->cid = cpu_to_le32(scmd_id(cmd));
|
|
writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
|
|
writecmd->count = cpu_to_le32(count * 512);
|
|
writecmd->sg.count = cpu_to_le32(1);
|
|
/* ->stable is not used - it did mean which type of write */
|
|
|
|
aac_build_sg(cmd, &writecmd->sg);
|
|
fibsize = sizeof(struct aac_write) +
|
|
((le32_to_cpu(writecmd->sg.count) - 1) *
|
|
sizeof (struct sgentry));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ContainerCommand,
|
|
fib,
|
|
fibsize,
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback) io_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
|
|
{
|
|
struct aac_srb * srbcmd;
|
|
u32 flag;
|
|
u32 timeout;
|
|
|
|
aac_fib_init(fib);
|
|
switch(cmd->sc_data_direction){
|
|
case DMA_TO_DEVICE:
|
|
flag = SRB_DataOut;
|
|
break;
|
|
case DMA_BIDIRECTIONAL:
|
|
flag = SRB_DataIn | SRB_DataOut;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
flag = SRB_DataIn;
|
|
break;
|
|
case DMA_NONE:
|
|
default: /* shuts up some versions of gcc */
|
|
flag = SRB_NoDataXfer;
|
|
break;
|
|
}
|
|
|
|
srbcmd = (struct aac_srb*) fib_data(fib);
|
|
srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
|
|
srbcmd->channel = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
|
|
srbcmd->id = cpu_to_le32(scmd_id(cmd));
|
|
srbcmd->lun = cpu_to_le32(cmd->device->lun);
|
|
srbcmd->flags = cpu_to_le32(flag);
|
|
timeout = cmd->request->timeout/HZ;
|
|
if (timeout == 0)
|
|
timeout = 1;
|
|
srbcmd->timeout = cpu_to_le32(timeout); // timeout in seconds
|
|
srbcmd->retry_limit = 0; /* Obsolete parameter */
|
|
srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
|
|
return srbcmd;
|
|
}
|
|
|
|
static void aac_srb_callback(void *context, struct fib * fibptr);
|
|
|
|
static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
|
|
|
|
aac_build_sg64(cmd, (struct sgmap64*) &srbcmd->sg);
|
|
srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
|
|
|
|
memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
|
|
memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
|
|
/*
|
|
* Build Scatter/Gather list
|
|
*/
|
|
fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
|
|
((le32_to_cpu(srbcmd->sg.count) & 0xff) *
|
|
sizeof (struct sgentry64));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ScsiPortCommand64, fib,
|
|
fibsize, FsaNormal, 0, 1,
|
|
(fib_callback) aac_srb_callback,
|
|
(void *) cmd);
|
|
}
|
|
|
|
static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
|
|
{
|
|
u16 fibsize;
|
|
struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
|
|
|
|
aac_build_sg(cmd, (struct sgmap*)&srbcmd->sg);
|
|
srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
|
|
|
|
memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
|
|
memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
|
|
/*
|
|
* Build Scatter/Gather list
|
|
*/
|
|
fibsize = sizeof (struct aac_srb) +
|
|
(((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
|
|
sizeof (struct sgentry));
|
|
BUG_ON (fibsize > (fib->dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr)));
|
|
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
|
|
(fib_callback) aac_srb_callback, (void *) cmd);
|
|
}
|
|
|
|
static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
|
|
{
|
|
if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac &&
|
|
(fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
|
|
return FAILED;
|
|
return aac_scsi_32(fib, cmd);
|
|
}
|
|
|
|
int aac_get_adapter_info(struct aac_dev* dev)
|
|
{
|
|
struct fib* fibptr;
|
|
int rcode;
|
|
u32 tmp;
|
|
struct aac_adapter_info *info;
|
|
struct aac_bus_info *command;
|
|
struct aac_bus_info_response *bus_info;
|
|
|
|
if (!(fibptr = aac_fib_alloc(dev)))
|
|
return -ENOMEM;
|
|
|
|
aac_fib_init(fibptr);
|
|
info = (struct aac_adapter_info *) fib_data(fibptr);
|
|
memset(info,0,sizeof(*info));
|
|
|
|
rcode = aac_fib_send(RequestAdapterInfo,
|
|
fibptr,
|
|
sizeof(*info),
|
|
FsaNormal,
|
|
-1, 1, /* First `interrupt' command uses special wait */
|
|
NULL,
|
|
NULL);
|
|
|
|
if (rcode < 0) {
|
|
/* FIB should be freed only after
|
|
* getting the response from the F/W */
|
|
if (rcode != -ERESTARTSYS) {
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
}
|
|
return rcode;
|
|
}
|
|
memcpy(&dev->adapter_info, info, sizeof(*info));
|
|
|
|
if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
|
|
struct aac_supplement_adapter_info * sinfo;
|
|
|
|
aac_fib_init(fibptr);
|
|
|
|
sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr);
|
|
|
|
memset(sinfo,0,sizeof(*sinfo));
|
|
|
|
rcode = aac_fib_send(RequestSupplementAdapterInfo,
|
|
fibptr,
|
|
sizeof(*sinfo),
|
|
FsaNormal,
|
|
1, 1,
|
|
NULL,
|
|
NULL);
|
|
|
|
if (rcode >= 0)
|
|
memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
|
|
if (rcode == -ERESTARTSYS) {
|
|
fibptr = aac_fib_alloc(dev);
|
|
if (!fibptr)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* GetBusInfo
|
|
*/
|
|
|
|
aac_fib_init(fibptr);
|
|
|
|
bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
|
|
|
|
memset(bus_info, 0, sizeof(*bus_info));
|
|
|
|
command = (struct aac_bus_info *)bus_info;
|
|
|
|
command->Command = cpu_to_le32(VM_Ioctl);
|
|
command->ObjType = cpu_to_le32(FT_DRIVE);
|
|
command->MethodId = cpu_to_le32(1);
|
|
command->CtlCmd = cpu_to_le32(GetBusInfo);
|
|
|
|
rcode = aac_fib_send(ContainerCommand,
|
|
fibptr,
|
|
sizeof (*bus_info),
|
|
FsaNormal,
|
|
1, 1,
|
|
NULL, NULL);
|
|
|
|
/* reasoned default */
|
|
dev->maximum_num_physicals = 16;
|
|
if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
|
|
dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
|
|
dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
|
|
}
|
|
|
|
if (!dev->in_reset) {
|
|
char buffer[16];
|
|
tmp = le32_to_cpu(dev->adapter_info.kernelrev);
|
|
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
|
|
dev->name,
|
|
dev->id,
|
|
tmp>>24,
|
|
(tmp>>16)&0xff,
|
|
tmp&0xff,
|
|
le32_to_cpu(dev->adapter_info.kernelbuild),
|
|
(int)sizeof(dev->supplement_adapter_info.BuildDate),
|
|
dev->supplement_adapter_info.BuildDate);
|
|
tmp = le32_to_cpu(dev->adapter_info.monitorrev);
|
|
printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
|
|
dev->name, dev->id,
|
|
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
|
|
le32_to_cpu(dev->adapter_info.monitorbuild));
|
|
tmp = le32_to_cpu(dev->adapter_info.biosrev);
|
|
printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
|
|
dev->name, dev->id,
|
|
tmp>>24,(tmp>>16)&0xff,tmp&0xff,
|
|
le32_to_cpu(dev->adapter_info.biosbuild));
|
|
buffer[0] = '\0';
|
|
if (aac_get_serial_number(
|
|
shost_to_class(dev->scsi_host_ptr), buffer))
|
|
printk(KERN_INFO "%s%d: serial %s",
|
|
dev->name, dev->id, buffer);
|
|
if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
|
|
printk(KERN_INFO "%s%d: TSID %.*s\n",
|
|
dev->name, dev->id,
|
|
(int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
|
|
dev->supplement_adapter_info.VpdInfo.Tsid);
|
|
}
|
|
if (!aac_check_reset || ((aac_check_reset == 1) &&
|
|
(dev->supplement_adapter_info.SupportedOptions2 &
|
|
AAC_OPTION_IGNORE_RESET))) {
|
|
printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
|
|
dev->name, dev->id);
|
|
}
|
|
}
|
|
|
|
dev->cache_protected = 0;
|
|
dev->jbod = ((dev->supplement_adapter_info.FeatureBits &
|
|
AAC_FEATURE_JBOD) != 0);
|
|
dev->nondasd_support = 0;
|
|
dev->raid_scsi_mode = 0;
|
|
if(dev->adapter_info.options & AAC_OPT_NONDASD)
|
|
dev->nondasd_support = 1;
|
|
|
|
/*
|
|
* If the firmware supports ROMB RAID/SCSI mode and we are currently
|
|
* in RAID/SCSI mode, set the flag. For now if in this mode we will
|
|
* force nondasd support on. If we decide to allow the non-dasd flag
|
|
* additional changes changes will have to be made to support
|
|
* RAID/SCSI. the function aac_scsi_cmd in this module will have to be
|
|
* changed to support the new dev->raid_scsi_mode flag instead of
|
|
* leaching off of the dev->nondasd_support flag. Also in linit.c the
|
|
* function aac_detect will have to be modified where it sets up the
|
|
* max number of channels based on the aac->nondasd_support flag only.
|
|
*/
|
|
if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
|
|
(dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
|
|
dev->nondasd_support = 1;
|
|
dev->raid_scsi_mode = 1;
|
|
}
|
|
if (dev->raid_scsi_mode != 0)
|
|
printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
|
|
dev->name, dev->id);
|
|
|
|
if (nondasd != -1)
|
|
dev->nondasd_support = (nondasd!=0);
|
|
if (dev->nondasd_support && !dev->in_reset)
|
|
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
|
|
|
|
if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
|
|
dev->needs_dac = 1;
|
|
dev->dac_support = 0;
|
|
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
|
|
(dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) {
|
|
if (!dev->in_reset)
|
|
printk(KERN_INFO "%s%d: 64bit support enabled.\n",
|
|
dev->name, dev->id);
|
|
dev->dac_support = 1;
|
|
}
|
|
|
|
if(dacmode != -1) {
|
|
dev->dac_support = (dacmode!=0);
|
|
}
|
|
|
|
/* avoid problems with AAC_QUIRK_SCSI_32 controllers */
|
|
if (dev->dac_support && (aac_get_driver_ident(dev->cardtype)->quirks
|
|
& AAC_QUIRK_SCSI_32)) {
|
|
dev->nondasd_support = 0;
|
|
dev->jbod = 0;
|
|
expose_physicals = 0;
|
|
}
|
|
|
|
if(dev->dac_support != 0) {
|
|
if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) &&
|
|
!pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
|
|
if (!dev->in_reset)
|
|
printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
|
|
dev->name, dev->id);
|
|
} else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32)) &&
|
|
!pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
|
|
printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
|
|
dev->name, dev->id);
|
|
dev->dac_support = 0;
|
|
} else {
|
|
printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
|
|
dev->name, dev->id);
|
|
rcode = -ENOMEM;
|
|
}
|
|
}
|
|
/*
|
|
* Deal with configuring for the individualized limits of each packet
|
|
* interface.
|
|
*/
|
|
dev->a_ops.adapter_scsi = (dev->dac_support)
|
|
? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32)
|
|
? aac_scsi_32_64
|
|
: aac_scsi_64)
|
|
: aac_scsi_32;
|
|
if (dev->raw_io_interface) {
|
|
dev->a_ops.adapter_bounds = (dev->raw_io_64)
|
|
? aac_bounds_64
|
|
: aac_bounds_32;
|
|
dev->a_ops.adapter_read = aac_read_raw_io;
|
|
dev->a_ops.adapter_write = aac_write_raw_io;
|
|
} else {
|
|
dev->a_ops.adapter_bounds = aac_bounds_32;
|
|
dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr) -
|
|
sizeof(struct aac_write) + sizeof(struct sgentry)) /
|
|
sizeof(struct sgentry);
|
|
if (dev->dac_support) {
|
|
dev->a_ops.adapter_read = aac_read_block64;
|
|
dev->a_ops.adapter_write = aac_write_block64;
|
|
/*
|
|
* 38 scatter gather elements
|
|
*/
|
|
dev->scsi_host_ptr->sg_tablesize =
|
|
(dev->max_fib_size -
|
|
sizeof(struct aac_fibhdr) -
|
|
sizeof(struct aac_write64) +
|
|
sizeof(struct sgentry64)) /
|
|
sizeof(struct sgentry64);
|
|
} else {
|
|
dev->a_ops.adapter_read = aac_read_block;
|
|
dev->a_ops.adapter_write = aac_write_block;
|
|
}
|
|
dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
|
|
if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
|
|
/*
|
|
* Worst case size that could cause sg overflow when
|
|
* we break up SG elements that are larger than 64KB.
|
|
* Would be nice if we could tell the SCSI layer what
|
|
* the maximum SG element size can be. Worst case is
|
|
* (sg_tablesize-1) 4KB elements with one 64KB
|
|
* element.
|
|
* 32bit -> 468 or 238KB 64bit -> 424 or 212KB
|
|
*/
|
|
dev->scsi_host_ptr->max_sectors =
|
|
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
|
|
}
|
|
}
|
|
/* FIB should be freed only after getting the response from the F/W */
|
|
if (rcode != -ERESTARTSYS) {
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
}
|
|
|
|
return rcode;
|
|
}
|
|
|
|
|
|
static void io_callback(void *context, struct fib * fibptr)
|
|
{
|
|
struct aac_dev *dev;
|
|
struct aac_read_reply *readreply;
|
|
struct scsi_cmnd *scsicmd;
|
|
u32 cid;
|
|
|
|
scsicmd = (struct scsi_cmnd *) context;
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
dev = fibptr->dev;
|
|
cid = scmd_id(scsicmd);
|
|
|
|
if (nblank(dprintk(x))) {
|
|
u64 lba;
|
|
switch (scsicmd->cmnd[0]) {
|
|
case WRITE_6:
|
|
case READ_6:
|
|
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
|
|
(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
|
|
break;
|
|
case WRITE_16:
|
|
case READ_16:
|
|
lba = ((u64)scsicmd->cmnd[2] << 56) |
|
|
((u64)scsicmd->cmnd[3] << 48) |
|
|
((u64)scsicmd->cmnd[4] << 40) |
|
|
((u64)scsicmd->cmnd[5] << 32) |
|
|
((u64)scsicmd->cmnd[6] << 24) |
|
|
(scsicmd->cmnd[7] << 16) |
|
|
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
|
|
break;
|
|
case WRITE_12:
|
|
case READ_12:
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) |
|
|
(scsicmd->cmnd[3] << 16) |
|
|
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
break;
|
|
default:
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) |
|
|
(scsicmd->cmnd[3] << 16) |
|
|
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
break;
|
|
}
|
|
printk(KERN_DEBUG
|
|
"io_callback[cpu %d]: lba = %llu, t = %ld.\n",
|
|
smp_processor_id(), (unsigned long long)lba, jiffies);
|
|
}
|
|
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
scsi_dma_unmap(scsicmd);
|
|
|
|
readreply = (struct aac_read_reply *)fib_data(fibptr);
|
|
switch (le32_to_cpu(readreply->status)) {
|
|
case ST_OK:
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_GOOD;
|
|
dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
|
|
break;
|
|
case ST_NOT_READY:
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
|
|
SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
break;
|
|
default:
|
|
#ifdef AAC_DETAILED_STATUS_INFO
|
|
printk(KERN_WARNING "io_callback: io failed, status = %d\n",
|
|
le32_to_cpu(readreply->status));
|
|
#endif
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
|
|
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
break;
|
|
}
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
|
|
scsicmd->scsi_done(scsicmd);
|
|
}
|
|
|
|
static int aac_read(struct scsi_cmnd * scsicmd)
|
|
{
|
|
u64 lba;
|
|
u32 count;
|
|
int status;
|
|
struct aac_dev *dev;
|
|
struct fib * cmd_fibcontext;
|
|
int cid;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
/*
|
|
* Get block address and transfer length
|
|
*/
|
|
switch (scsicmd->cmnd[0]) {
|
|
case READ_6:
|
|
dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
|
|
(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
|
|
count = scsicmd->cmnd[4];
|
|
|
|
if (count == 0)
|
|
count = 256;
|
|
break;
|
|
case READ_16:
|
|
dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((u64)scsicmd->cmnd[2] << 56) |
|
|
((u64)scsicmd->cmnd[3] << 48) |
|
|
((u64)scsicmd->cmnd[4] << 40) |
|
|
((u64)scsicmd->cmnd[5] << 32) |
|
|
((u64)scsicmd->cmnd[6] << 24) |
|
|
(scsicmd->cmnd[7] << 16) |
|
|
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
|
|
count = (scsicmd->cmnd[10] << 24) |
|
|
(scsicmd->cmnd[11] << 16) |
|
|
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
|
|
break;
|
|
case READ_12:
|
|
dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) |
|
|
(scsicmd->cmnd[3] << 16) |
|
|
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
count = (scsicmd->cmnd[6] << 24) |
|
|
(scsicmd->cmnd[7] << 16) |
|
|
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
|
|
break;
|
|
default:
|
|
dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) |
|
|
(scsicmd->cmnd[3] << 16) |
|
|
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
|
|
break;
|
|
}
|
|
|
|
if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
|
|
cid = scmd_id(scsicmd);
|
|
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
|
|
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 1;
|
|
}
|
|
|
|
dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
|
|
smp_processor_id(), (unsigned long long)lba, jiffies));
|
|
if (aac_adapter_bounds(dev,scsicmd,lba))
|
|
return 0;
|
|
/*
|
|
* Alocate and initialize a Fib
|
|
*/
|
|
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
|
|
printk(KERN_WARNING "aac_read: fib allocation failed\n");
|
|
return -1;
|
|
}
|
|
|
|
status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
|
|
/*
|
|
* For some reason, the Fib didn't queue, return QUEUE_FULL
|
|
*/
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
|
|
scsicmd->scsi_done(scsicmd);
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return 0;
|
|
}
|
|
|
|
static int aac_write(struct scsi_cmnd * scsicmd)
|
|
{
|
|
u64 lba;
|
|
u32 count;
|
|
int fua;
|
|
int status;
|
|
struct aac_dev *dev;
|
|
struct fib * cmd_fibcontext;
|
|
int cid;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
/*
|
|
* Get block address and transfer length
|
|
*/
|
|
if (scsicmd->cmnd[0] == WRITE_6) /* 6 byte command */
|
|
{
|
|
lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
|
|
count = scsicmd->cmnd[4];
|
|
if (count == 0)
|
|
count = 256;
|
|
fua = 0;
|
|
} else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
|
|
dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((u64)scsicmd->cmnd[2] << 56) |
|
|
((u64)scsicmd->cmnd[3] << 48) |
|
|
((u64)scsicmd->cmnd[4] << 40) |
|
|
((u64)scsicmd->cmnd[5] << 32) |
|
|
((u64)scsicmd->cmnd[6] << 24) |
|
|
(scsicmd->cmnd[7] << 16) |
|
|
(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
|
|
count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
|
|
(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
|
|
fua = scsicmd->cmnd[1] & 0x8;
|
|
} else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
|
|
dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
|
|
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
|
|
| (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
|
|
| (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
|
|
fua = scsicmd->cmnd[1] & 0x8;
|
|
} else {
|
|
dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
|
|
lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
|
|
fua = scsicmd->cmnd[1] & 0x8;
|
|
}
|
|
|
|
if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
|
|
cid = scmd_id(scsicmd);
|
|
dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
|
|
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 1;
|
|
}
|
|
|
|
dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
|
|
smp_processor_id(), (unsigned long long)lba, jiffies));
|
|
if (aac_adapter_bounds(dev,scsicmd,lba))
|
|
return 0;
|
|
/*
|
|
* Allocate and initialize a Fib then setup a BlockWrite command
|
|
*/
|
|
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
|
|
/* FIB temporarily unavailable,not catastrophic failure */
|
|
|
|
/* scsicmd->result = DID_ERROR << 16;
|
|
* scsicmd->scsi_done(scsicmd);
|
|
* return 0;
|
|
*/
|
|
printk(KERN_WARNING "aac_write: fib allocation failed\n");
|
|
return -1;
|
|
}
|
|
|
|
status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
|
|
/*
|
|
* For some reason, the Fib didn't queue, return QUEUE_FULL
|
|
*/
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
|
|
scsicmd->scsi_done(scsicmd);
|
|
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return 0;
|
|
}
|
|
|
|
static void synchronize_callback(void *context, struct fib *fibptr)
|
|
{
|
|
struct aac_synchronize_reply *synchronizereply;
|
|
struct scsi_cmnd *cmd;
|
|
|
|
cmd = context;
|
|
|
|
if (!aac_valid_context(cmd, fibptr))
|
|
return;
|
|
|
|
dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
|
|
smp_processor_id(), jiffies));
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
|
|
synchronizereply = fib_data(fibptr);
|
|
if (le32_to_cpu(synchronizereply->status) == CT_OK)
|
|
cmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
else {
|
|
struct scsi_device *sdev = cmd->device;
|
|
struct aac_dev *dev = fibptr->dev;
|
|
u32 cid = sdev_id(sdev);
|
|
printk(KERN_WARNING
|
|
"synchronize_callback: synchronize failed, status = %d\n",
|
|
le32_to_cpu(synchronizereply->status));
|
|
cmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
|
|
ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
|
|
memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
}
|
|
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
cmd->scsi_done(cmd);
|
|
}
|
|
|
|
static int aac_synchronize(struct scsi_cmnd *scsicmd)
|
|
{
|
|
int status;
|
|
struct fib *cmd_fibcontext;
|
|
struct aac_synchronize *synchronizecmd;
|
|
struct scsi_cmnd *cmd;
|
|
struct scsi_device *sdev = scsicmd->device;
|
|
int active = 0;
|
|
struct aac_dev *aac;
|
|
u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
|
|
(scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
|
|
u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* Wait for all outstanding queued commands to complete to this
|
|
* specific target (block).
|
|
*/
|
|
spin_lock_irqsave(&sdev->list_lock, flags);
|
|
list_for_each_entry(cmd, &sdev->cmd_list, list)
|
|
if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
|
|
u64 cmnd_lba;
|
|
u32 cmnd_count;
|
|
|
|
if (cmd->cmnd[0] == WRITE_6) {
|
|
cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
|
|
(cmd->cmnd[2] << 8) |
|
|
cmd->cmnd[3];
|
|
cmnd_count = cmd->cmnd[4];
|
|
if (cmnd_count == 0)
|
|
cmnd_count = 256;
|
|
} else if (cmd->cmnd[0] == WRITE_16) {
|
|
cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
|
|
((u64)cmd->cmnd[3] << 48) |
|
|
((u64)cmd->cmnd[4] << 40) |
|
|
((u64)cmd->cmnd[5] << 32) |
|
|
((u64)cmd->cmnd[6] << 24) |
|
|
(cmd->cmnd[7] << 16) |
|
|
(cmd->cmnd[8] << 8) |
|
|
cmd->cmnd[9];
|
|
cmnd_count = (cmd->cmnd[10] << 24) |
|
|
(cmd->cmnd[11] << 16) |
|
|
(cmd->cmnd[12] << 8) |
|
|
cmd->cmnd[13];
|
|
} else if (cmd->cmnd[0] == WRITE_12) {
|
|
cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
|
|
(cmd->cmnd[3] << 16) |
|
|
(cmd->cmnd[4] << 8) |
|
|
cmd->cmnd[5];
|
|
cmnd_count = (cmd->cmnd[6] << 24) |
|
|
(cmd->cmnd[7] << 16) |
|
|
(cmd->cmnd[8] << 8) |
|
|
cmd->cmnd[9];
|
|
} else if (cmd->cmnd[0] == WRITE_10) {
|
|
cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
|
|
(cmd->cmnd[3] << 16) |
|
|
(cmd->cmnd[4] << 8) |
|
|
cmd->cmnd[5];
|
|
cmnd_count = (cmd->cmnd[7] << 8) |
|
|
cmd->cmnd[8];
|
|
} else
|
|
continue;
|
|
if (((cmnd_lba + cmnd_count) < lba) ||
|
|
(count && ((lba + count) < cmnd_lba)))
|
|
continue;
|
|
++active;
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sdev->list_lock, flags);
|
|
|
|
/*
|
|
* Yield the processor (requeue for later)
|
|
*/
|
|
if (active)
|
|
return SCSI_MLQUEUE_DEVICE_BUSY;
|
|
|
|
aac = (struct aac_dev *)sdev->host->hostdata;
|
|
if (aac->in_reset)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
/*
|
|
* Allocate and initialize a Fib
|
|
*/
|
|
if (!(cmd_fibcontext = aac_fib_alloc(aac)))
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
aac_fib_init(cmd_fibcontext);
|
|
|
|
synchronizecmd = fib_data(cmd_fibcontext);
|
|
synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
|
|
synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
|
|
synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
|
|
synchronizecmd->count =
|
|
cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
|
|
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
status = aac_fib_send(ContainerCommand,
|
|
cmd_fibcontext,
|
|
sizeof(struct aac_synchronize),
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback)synchronize_callback,
|
|
(void *)scsicmd);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING
|
|
"aac_synchronize: aac_fib_send failed with status: %d.\n", status);
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
static void aac_start_stop_callback(void *context, struct fib *fibptr)
|
|
{
|
|
struct scsi_cmnd *scsicmd = context;
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
scsicmd->scsi_done(scsicmd);
|
|
}
|
|
|
|
static int aac_start_stop(struct scsi_cmnd *scsicmd)
|
|
{
|
|
int status;
|
|
struct fib *cmd_fibcontext;
|
|
struct aac_power_management *pmcmd;
|
|
struct scsi_device *sdev = scsicmd->device;
|
|
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
|
|
|
|
if (!(aac->supplement_adapter_info.SupportedOptions2 &
|
|
AAC_OPTION_POWER_MANAGEMENT)) {
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
|
|
if (aac->in_reset)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
/*
|
|
* Allocate and initialize a Fib
|
|
*/
|
|
cmd_fibcontext = aac_fib_alloc(aac);
|
|
if (!cmd_fibcontext)
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
|
|
aac_fib_init(cmd_fibcontext);
|
|
|
|
pmcmd = fib_data(cmd_fibcontext);
|
|
pmcmd->command = cpu_to_le32(VM_ContainerConfig);
|
|
pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
|
|
/* Eject bit ignored, not relevant */
|
|
pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
|
|
cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
|
|
pmcmd->cid = cpu_to_le32(sdev_id(sdev));
|
|
pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
|
|
cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
|
|
|
|
/*
|
|
* Now send the Fib to the adapter
|
|
*/
|
|
status = aac_fib_send(ContainerCommand,
|
|
cmd_fibcontext,
|
|
sizeof(struct aac_power_management),
|
|
FsaNormal,
|
|
0, 1,
|
|
(fib_callback)aac_start_stop_callback,
|
|
(void *)scsicmd);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
/**
|
|
* aac_scsi_cmd() - Process SCSI command
|
|
* @scsicmd: SCSI command block
|
|
*
|
|
* Emulate a SCSI command and queue the required request for the
|
|
* aacraid firmware.
|
|
*/
|
|
|
|
int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
|
|
{
|
|
u32 cid;
|
|
struct Scsi_Host *host = scsicmd->device->host;
|
|
struct aac_dev *dev = (struct aac_dev *)host->hostdata;
|
|
struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
|
|
|
|
if (fsa_dev_ptr == NULL)
|
|
return -1;
|
|
/*
|
|
* If the bus, id or lun is out of range, return fail
|
|
* Test does not apply to ID 16, the pseudo id for the controller
|
|
* itself.
|
|
*/
|
|
cid = scmd_id(scsicmd);
|
|
if (cid != host->this_id) {
|
|
if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) {
|
|
if((cid >= dev->maximum_num_containers) ||
|
|
(scsicmd->device->lun != 0)) {
|
|
scsicmd->result = DID_NO_CONNECT << 16;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If the target container doesn't exist, it may have
|
|
* been newly created
|
|
*/
|
|
if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
|
|
(fsa_dev_ptr[cid].sense_data.sense_key ==
|
|
NOT_READY)) {
|
|
switch (scsicmd->cmnd[0]) {
|
|
case SERVICE_ACTION_IN:
|
|
if (!(dev->raw_io_interface) ||
|
|
!(dev->raw_io_64) ||
|
|
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
|
|
break;
|
|
case INQUIRY:
|
|
case READ_CAPACITY:
|
|
case TEST_UNIT_READY:
|
|
if (dev->in_reset)
|
|
return -1;
|
|
return _aac_probe_container(scsicmd,
|
|
aac_probe_container_callback2);
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
} else { /* check for physical non-dasd devices */
|
|
if (dev->nondasd_support || expose_physicals ||
|
|
dev->jbod) {
|
|
if (dev->in_reset)
|
|
return -1;
|
|
return aac_send_srb_fib(scsicmd);
|
|
} else {
|
|
scsicmd->result = DID_NO_CONNECT << 16;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
/*
|
|
* else Command for the controller itself
|
|
*/
|
|
else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */
|
|
(scsicmd->cmnd[0] != TEST_UNIT_READY))
|
|
{
|
|
dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
|
|
ASENCODE_INVALID_COMMAND, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Handle commands here that don't really require going out to the adapter */
|
|
switch (scsicmd->cmnd[0]) {
|
|
case INQUIRY:
|
|
{
|
|
struct inquiry_data inq_data;
|
|
|
|
dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
|
|
memset(&inq_data, 0, sizeof (struct inquiry_data));
|
|
|
|
if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) {
|
|
char *arr = (char *)&inq_data;
|
|
|
|
/* EVPD bit set */
|
|
arr[0] = (scmd_id(scsicmd) == host->this_id) ?
|
|
INQD_PDT_PROC : INQD_PDT_DA;
|
|
if (scsicmd->cmnd[2] == 0) {
|
|
/* supported vital product data pages */
|
|
arr[3] = 2;
|
|
arr[4] = 0x0;
|
|
arr[5] = 0x80;
|
|
arr[1] = scsicmd->cmnd[2];
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
|
|
sizeof(inq_data));
|
|
scsicmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
} else if (scsicmd->cmnd[2] == 0x80) {
|
|
/* unit serial number page */
|
|
arr[3] = setinqserial(dev, &arr[4],
|
|
scmd_id(scsicmd));
|
|
arr[1] = scsicmd->cmnd[2];
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
|
|
sizeof(inq_data));
|
|
if (aac_wwn != 2)
|
|
return aac_get_container_serial(
|
|
scsicmd);
|
|
/* SLES 10 SP1 special */
|
|
scsicmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
} else {
|
|
/* vpd page not implemented */
|
|
scsicmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD,
|
|
ASENCODE_NO_SENSE, 7, 2);
|
|
memcpy(scsicmd->sense_buffer,
|
|
&dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t,
|
|
sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
}
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
inq_data.inqd_ver = 2; /* claim compliance to SCSI-2 */
|
|
inq_data.inqd_rdf = 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
|
|
inq_data.inqd_len = 31;
|
|
/*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
|
|
inq_data.inqd_pad2= 0x32 ; /*WBus16|Sync|CmdQue */
|
|
/*
|
|
* Set the Vendor, Product, and Revision Level
|
|
* see: <vendor>.c i.e. aac.c
|
|
*/
|
|
if (cid == host->this_id) {
|
|
setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types));
|
|
inq_data.inqd_pdt = INQD_PDT_PROC; /* Processor device */
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq_data,
|
|
sizeof(inq_data));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
if (dev->in_reset)
|
|
return -1;
|
|
setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
|
|
inq_data.inqd_pdt = INQD_PDT_DA; /* Direct/random access device */
|
|
scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
|
|
return aac_get_container_name(scsicmd);
|
|
}
|
|
case SERVICE_ACTION_IN:
|
|
if (!(dev->raw_io_interface) ||
|
|
!(dev->raw_io_64) ||
|
|
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
|
|
break;
|
|
{
|
|
u64 capacity;
|
|
char cp[13];
|
|
unsigned int alloc_len;
|
|
|
|
dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
|
|
capacity = fsa_dev_ptr[cid].size - 1;
|
|
cp[0] = (capacity >> 56) & 0xff;
|
|
cp[1] = (capacity >> 48) & 0xff;
|
|
cp[2] = (capacity >> 40) & 0xff;
|
|
cp[3] = (capacity >> 32) & 0xff;
|
|
cp[4] = (capacity >> 24) & 0xff;
|
|
cp[5] = (capacity >> 16) & 0xff;
|
|
cp[6] = (capacity >> 8) & 0xff;
|
|
cp[7] = (capacity >> 0) & 0xff;
|
|
cp[8] = 0;
|
|
cp[9] = 0;
|
|
cp[10] = 2;
|
|
cp[11] = 0;
|
|
cp[12] = 0;
|
|
|
|
alloc_len = ((scsicmd->cmnd[10] << 24)
|
|
+ (scsicmd->cmnd[11] << 16)
|
|
+ (scsicmd->cmnd[12] << 8) + scsicmd->cmnd[13]);
|
|
|
|
alloc_len = min_t(size_t, alloc_len, sizeof(cp));
|
|
scsi_sg_copy_from_buffer(scsicmd, cp, alloc_len);
|
|
if (alloc_len < scsi_bufflen(scsicmd))
|
|
scsi_set_resid(scsicmd,
|
|
scsi_bufflen(scsicmd) - alloc_len);
|
|
|
|
/* Do not cache partition table for arrays */
|
|
scsicmd->device->removable = 1;
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
case READ_CAPACITY:
|
|
{
|
|
u32 capacity;
|
|
char cp[8];
|
|
|
|
dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
|
|
if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
|
|
capacity = fsa_dev_ptr[cid].size - 1;
|
|
else
|
|
capacity = (u32)-1;
|
|
|
|
cp[0] = (capacity >> 24) & 0xff;
|
|
cp[1] = (capacity >> 16) & 0xff;
|
|
cp[2] = (capacity >> 8) & 0xff;
|
|
cp[3] = (capacity >> 0) & 0xff;
|
|
cp[4] = 0;
|
|
cp[5] = 0;
|
|
cp[6] = 2;
|
|
cp[7] = 0;
|
|
scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
|
|
/* Do not cache partition table for arrays */
|
|
scsicmd->device->removable = 1;
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
case MODE_SENSE:
|
|
{
|
|
char mode_buf[7];
|
|
int mode_buf_length = 4;
|
|
|
|
dprintk((KERN_DEBUG "MODE SENSE command.\n"));
|
|
mode_buf[0] = 3; /* Mode data length */
|
|
mode_buf[1] = 0; /* Medium type - default */
|
|
mode_buf[2] = 0; /* Device-specific param,
|
|
bit 8: 0/1 = write enabled/protected
|
|
bit 4: 0/1 = FUA enabled */
|
|
if (dev->raw_io_interface && ((aac_cache & 5) != 1))
|
|
mode_buf[2] = 0x10;
|
|
mode_buf[3] = 0; /* Block descriptor length */
|
|
if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
|
|
((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
|
|
mode_buf[0] = 6;
|
|
mode_buf[4] = 8;
|
|
mode_buf[5] = 1;
|
|
mode_buf[6] = ((aac_cache & 6) == 2)
|
|
? 0 : 0x04; /* WCE */
|
|
mode_buf_length = 7;
|
|
if (mode_buf_length > scsicmd->cmnd[4])
|
|
mode_buf_length = scsicmd->cmnd[4];
|
|
}
|
|
scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length);
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
|
|
return 0;
|
|
}
|
|
case MODE_SENSE_10:
|
|
{
|
|
char mode_buf[11];
|
|
int mode_buf_length = 8;
|
|
|
|
dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
|
|
mode_buf[0] = 0; /* Mode data length (MSB) */
|
|
mode_buf[1] = 6; /* Mode data length (LSB) */
|
|
mode_buf[2] = 0; /* Medium type - default */
|
|
mode_buf[3] = 0; /* Device-specific param,
|
|
bit 8: 0/1 = write enabled/protected
|
|
bit 4: 0/1 = FUA enabled */
|
|
if (dev->raw_io_interface && ((aac_cache & 5) != 1))
|
|
mode_buf[3] = 0x10;
|
|
mode_buf[4] = 0; /* reserved */
|
|
mode_buf[5] = 0; /* reserved */
|
|
mode_buf[6] = 0; /* Block descriptor length (MSB) */
|
|
mode_buf[7] = 0; /* Block descriptor length (LSB) */
|
|
if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
|
|
((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
|
|
mode_buf[1] = 9;
|
|
mode_buf[8] = 8;
|
|
mode_buf[9] = 1;
|
|
mode_buf[10] = ((aac_cache & 6) == 2)
|
|
? 0 : 0x04; /* WCE */
|
|
mode_buf_length = 11;
|
|
if (mode_buf_length > scsicmd->cmnd[8])
|
|
mode_buf_length = scsicmd->cmnd[8];
|
|
}
|
|
scsi_sg_copy_from_buffer(scsicmd, mode_buf, mode_buf_length);
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
|
|
return 0;
|
|
}
|
|
case REQUEST_SENSE:
|
|
dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data));
|
|
memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
|
|
case ALLOW_MEDIUM_REMOVAL:
|
|
dprintk((KERN_DEBUG "LOCK command.\n"));
|
|
if (scsicmd->cmnd[4])
|
|
fsa_dev_ptr[cid].locked = 1;
|
|
else
|
|
fsa_dev_ptr[cid].locked = 0;
|
|
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
/*
|
|
* These commands are all No-Ops
|
|
*/
|
|
case TEST_UNIT_READY:
|
|
if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
|
|
SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
NOT_READY, SENCODE_BECOMING_READY,
|
|
ASENCODE_BECOMING_READY, 0, 0);
|
|
memcpy(scsicmd->sense_buffer,
|
|
&dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t,
|
|
sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
/* FALLTHRU */
|
|
case RESERVE:
|
|
case RELEASE:
|
|
case REZERO_UNIT:
|
|
case REASSIGN_BLOCKS:
|
|
case SEEK_10:
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
|
|
case START_STOP:
|
|
return aac_start_stop(scsicmd);
|
|
}
|
|
|
|
switch (scsicmd->cmnd[0])
|
|
{
|
|
case READ_6:
|
|
case READ_10:
|
|
case READ_12:
|
|
case READ_16:
|
|
if (dev->in_reset)
|
|
return -1;
|
|
/*
|
|
* Hack to keep track of ordinal number of the device that
|
|
* corresponds to a container. Needed to convert
|
|
* containers to /dev/sd device names
|
|
*/
|
|
|
|
if (scsicmd->request->rq_disk)
|
|
strlcpy(fsa_dev_ptr[cid].devname,
|
|
scsicmd->request->rq_disk->disk_name,
|
|
min(sizeof(fsa_dev_ptr[cid].devname),
|
|
sizeof(scsicmd->request->rq_disk->disk_name) + 1));
|
|
|
|
return aac_read(scsicmd);
|
|
|
|
case WRITE_6:
|
|
case WRITE_10:
|
|
case WRITE_12:
|
|
case WRITE_16:
|
|
if (dev->in_reset)
|
|
return -1;
|
|
return aac_write(scsicmd);
|
|
|
|
case SYNCHRONIZE_CACHE:
|
|
if (((aac_cache & 6) == 6) && dev->cache_protected) {
|
|
scsicmd->result = DID_OK << 16 |
|
|
COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
/* Issue FIB to tell Firmware to flush it's cache */
|
|
if ((aac_cache & 6) != 2)
|
|
return aac_synchronize(scsicmd);
|
|
/* FALLTHRU */
|
|
default:
|
|
/*
|
|
* Unhandled commands
|
|
*/
|
|
dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
|
|
set_sense(&dev->fsa_dev[cid].sense_data,
|
|
ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
|
|
ASENCODE_INVALID_COMMAND, 0, 0);
|
|
memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
|
|
min_t(size_t,
|
|
sizeof(dev->fsa_dev[cid].sense_data),
|
|
SCSI_SENSE_BUFFERSIZE));
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int query_disk(struct aac_dev *dev, void __user *arg)
|
|
{
|
|
struct aac_query_disk qd;
|
|
struct fsa_dev_info *fsa_dev_ptr;
|
|
|
|
fsa_dev_ptr = dev->fsa_dev;
|
|
if (!fsa_dev_ptr)
|
|
return -EBUSY;
|
|
if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
|
|
return -EFAULT;
|
|
if (qd.cnum == -1)
|
|
qd.cnum = qd.id;
|
|
else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1))
|
|
{
|
|
if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
|
|
return -EINVAL;
|
|
qd.instance = dev->scsi_host_ptr->host_no;
|
|
qd.bus = 0;
|
|
qd.id = CONTAINER_TO_ID(qd.cnum);
|
|
qd.lun = CONTAINER_TO_LUN(qd.cnum);
|
|
}
|
|
else return -EINVAL;
|
|
|
|
qd.valid = fsa_dev_ptr[qd.cnum].valid != 0;
|
|
qd.locked = fsa_dev_ptr[qd.cnum].locked;
|
|
qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
|
|
|
|
if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
|
|
qd.unmapped = 1;
|
|
else
|
|
qd.unmapped = 0;
|
|
|
|
strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
|
|
min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
|
|
|
|
if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int force_delete_disk(struct aac_dev *dev, void __user *arg)
|
|
{
|
|
struct aac_delete_disk dd;
|
|
struct fsa_dev_info *fsa_dev_ptr;
|
|
|
|
fsa_dev_ptr = dev->fsa_dev;
|
|
if (!fsa_dev_ptr)
|
|
return -EBUSY;
|
|
|
|
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
|
|
return -EFAULT;
|
|
|
|
if (dd.cnum >= dev->maximum_num_containers)
|
|
return -EINVAL;
|
|
/*
|
|
* Mark this container as being deleted.
|
|
*/
|
|
fsa_dev_ptr[dd.cnum].deleted = 1;
|
|
/*
|
|
* Mark the container as no longer valid
|
|
*/
|
|
fsa_dev_ptr[dd.cnum].valid = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int delete_disk(struct aac_dev *dev, void __user *arg)
|
|
{
|
|
struct aac_delete_disk dd;
|
|
struct fsa_dev_info *fsa_dev_ptr;
|
|
|
|
fsa_dev_ptr = dev->fsa_dev;
|
|
if (!fsa_dev_ptr)
|
|
return -EBUSY;
|
|
|
|
if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
|
|
return -EFAULT;
|
|
|
|
if (dd.cnum >= dev->maximum_num_containers)
|
|
return -EINVAL;
|
|
/*
|
|
* If the container is locked, it can not be deleted by the API.
|
|
*/
|
|
if (fsa_dev_ptr[dd.cnum].locked)
|
|
return -EBUSY;
|
|
else {
|
|
/*
|
|
* Mark the container as no longer being valid.
|
|
*/
|
|
fsa_dev_ptr[dd.cnum].valid = 0;
|
|
fsa_dev_ptr[dd.cnum].devname[0] = '\0';
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
|
|
{
|
|
switch (cmd) {
|
|
case FSACTL_QUERY_DISK:
|
|
return query_disk(dev, arg);
|
|
case FSACTL_DELETE_DISK:
|
|
return delete_disk(dev, arg);
|
|
case FSACTL_FORCE_DELETE_DISK:
|
|
return force_delete_disk(dev, arg);
|
|
case FSACTL_GET_CONTAINERS:
|
|
return aac_get_containers(dev);
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
*
|
|
* aac_srb_callback
|
|
* @context: the context set in the fib - here it is scsi cmd
|
|
* @fibptr: pointer to the fib
|
|
*
|
|
* Handles the completion of a scsi command to a non dasd device
|
|
*
|
|
*/
|
|
|
|
static void aac_srb_callback(void *context, struct fib * fibptr)
|
|
{
|
|
struct aac_dev *dev;
|
|
struct aac_srb_reply *srbreply;
|
|
struct scsi_cmnd *scsicmd;
|
|
|
|
scsicmd = (struct scsi_cmnd *) context;
|
|
|
|
if (!aac_valid_context(scsicmd, fibptr))
|
|
return;
|
|
|
|
BUG_ON(fibptr == NULL);
|
|
|
|
dev = fibptr->dev;
|
|
|
|
srbreply = (struct aac_srb_reply *) fib_data(fibptr);
|
|
|
|
scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
|
|
/*
|
|
* Calculate resid for sg
|
|
*/
|
|
|
|
scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
|
|
- le32_to_cpu(srbreply->data_xfer_length));
|
|
|
|
scsi_dma_unmap(scsicmd);
|
|
|
|
/* expose physical device if expose_physicald flag is on */
|
|
if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
|
|
&& expose_physicals > 0)
|
|
aac_expose_phy_device(scsicmd);
|
|
|
|
/*
|
|
* First check the fib status
|
|
*/
|
|
|
|
if (le32_to_cpu(srbreply->status) != ST_OK){
|
|
int len;
|
|
printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
|
|
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
|
|
SCSI_SENSE_BUFFERSIZE);
|
|
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
|
|
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
|
|
}
|
|
|
|
/*
|
|
* Next check the srb status
|
|
*/
|
|
switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
|
|
case SRB_STATUS_ERROR_RECOVERY:
|
|
case SRB_STATUS_PENDING:
|
|
case SRB_STATUS_SUCCESS:
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
case SRB_STATUS_DATA_OVERRUN:
|
|
switch(scsicmd->cmnd[0]){
|
|
case READ_6:
|
|
case WRITE_6:
|
|
case READ_10:
|
|
case WRITE_10:
|
|
case READ_12:
|
|
case WRITE_12:
|
|
case READ_16:
|
|
case WRITE_16:
|
|
if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
|
|
printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
|
|
} else {
|
|
printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
|
|
}
|
|
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
case INQUIRY: {
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
}
|
|
default:
|
|
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
}
|
|
break;
|
|
case SRB_STATUS_ABORTED:
|
|
scsicmd->result = DID_ABORT << 16 | ABORT << 8;
|
|
break;
|
|
case SRB_STATUS_ABORT_FAILED:
|
|
// Not sure about this one - but assuming the hba was trying to abort for some reason
|
|
scsicmd->result = DID_ERROR << 16 | ABORT << 8;
|
|
break;
|
|
case SRB_STATUS_PARITY_ERROR:
|
|
scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
|
|
break;
|
|
case SRB_STATUS_NO_DEVICE:
|
|
case SRB_STATUS_INVALID_PATH_ID:
|
|
case SRB_STATUS_INVALID_TARGET_ID:
|
|
case SRB_STATUS_INVALID_LUN:
|
|
case SRB_STATUS_SELECTION_TIMEOUT:
|
|
scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
|
|
case SRB_STATUS_COMMAND_TIMEOUT:
|
|
case SRB_STATUS_TIMEOUT:
|
|
scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
|
|
case SRB_STATUS_BUSY:
|
|
scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
|
|
case SRB_STATUS_BUS_RESET:
|
|
scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
|
|
break;
|
|
|
|
case SRB_STATUS_MESSAGE_REJECTED:
|
|
scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
|
|
break;
|
|
case SRB_STATUS_REQUEST_FLUSHED:
|
|
case SRB_STATUS_ERROR:
|
|
case SRB_STATUS_INVALID_REQUEST:
|
|
case SRB_STATUS_REQUEST_SENSE_FAILED:
|
|
case SRB_STATUS_NO_HBA:
|
|
case SRB_STATUS_UNEXPECTED_BUS_FREE:
|
|
case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
|
|
case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
|
|
case SRB_STATUS_DELAYED_RETRY:
|
|
case SRB_STATUS_BAD_FUNCTION:
|
|
case SRB_STATUS_NOT_STARTED:
|
|
case SRB_STATUS_NOT_IN_USE:
|
|
case SRB_STATUS_FORCE_ABORT:
|
|
case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
|
|
default:
|
|
#ifdef AAC_DETAILED_STATUS_INFO
|
|
printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
|
|
le32_to_cpu(srbreply->srb_status) & 0x3F,
|
|
aac_get_status_string(
|
|
le32_to_cpu(srbreply->srb_status) & 0x3F),
|
|
scsicmd->cmnd[0],
|
|
le32_to_cpu(srbreply->scsi_status));
|
|
#endif
|
|
if ((scsicmd->cmnd[0] == ATA_12)
|
|
|| (scsicmd->cmnd[0] == ATA_16)) {
|
|
if (scsicmd->cmnd[2] & (0x01 << 5)) {
|
|
scsicmd->result = DID_OK << 16
|
|
| COMMAND_COMPLETE << 8;
|
|
break;
|
|
} else {
|
|
scsicmd->result = DID_ERROR << 16
|
|
| COMMAND_COMPLETE << 8;
|
|
break;
|
|
}
|
|
} else {
|
|
scsicmd->result = DID_ERROR << 16
|
|
| COMMAND_COMPLETE << 8;
|
|
break;
|
|
}
|
|
}
|
|
if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
|
|
int len;
|
|
scsicmd->result |= SAM_STAT_CHECK_CONDITION;
|
|
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
|
|
SCSI_SENSE_BUFFERSIZE);
|
|
#ifdef AAC_DETAILED_STATUS_INFO
|
|
printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
|
|
le32_to_cpu(srbreply->status), len);
|
|
#endif
|
|
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
|
|
}
|
|
/*
|
|
* OR in the scsi status (already shifted up a bit)
|
|
*/
|
|
scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
|
|
|
|
aac_fib_complete(fibptr);
|
|
aac_fib_free(fibptr);
|
|
scsicmd->scsi_done(scsicmd);
|
|
}
|
|
|
|
/**
|
|
*
|
|
* aac_send_scb_fib
|
|
* @scsicmd: the scsi command block
|
|
*
|
|
* This routine will form a FIB and fill in the aac_srb from the
|
|
* scsicmd passed in.
|
|
*/
|
|
|
|
static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
|
|
{
|
|
struct fib* cmd_fibcontext;
|
|
struct aac_dev* dev;
|
|
int status;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
|
|
scsicmd->device->lun > 7) {
|
|
scsicmd->result = DID_NO_CONNECT << 16;
|
|
scsicmd->scsi_done(scsicmd);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Allocate and initialize a Fib then setup a BlockWrite command
|
|
*/
|
|
if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
|
|
return -1;
|
|
}
|
|
status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
|
|
|
|
/*
|
|
* Check that the command queued to the controller
|
|
*/
|
|
if (status == -EINPROGRESS) {
|
|
scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
|
|
aac_fib_complete(cmd_fibcontext);
|
|
aac_fib_free(cmd_fibcontext);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* psg)
|
|
{
|
|
struct aac_dev *dev;
|
|
unsigned long byte_count = 0;
|
|
int nseg;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
// Get rid of old data
|
|
psg->count = 0;
|
|
psg->sg[0].addr = 0;
|
|
psg->sg[0].count = 0;
|
|
|
|
nseg = scsi_dma_map(scsicmd);
|
|
BUG_ON(nseg < 0);
|
|
if (nseg) {
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
psg->count = cpu_to_le32(nseg);
|
|
|
|
scsi_for_each_sg(scsicmd, sg, nseg, i) {
|
|
psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
|
|
psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
|
|
byte_count += sg_dma_len(sg);
|
|
}
|
|
/* hba wants the size to be exact */
|
|
if (byte_count > scsi_bufflen(scsicmd)) {
|
|
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
|
|
(byte_count - scsi_bufflen(scsicmd));
|
|
psg->sg[i-1].count = cpu_to_le32(temp);
|
|
byte_count = scsi_bufflen(scsicmd);
|
|
}
|
|
/* Check for command underflow */
|
|
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
|
|
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
|
|
byte_count, scsicmd->underflow);
|
|
}
|
|
}
|
|
return byte_count;
|
|
}
|
|
|
|
|
|
static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg)
|
|
{
|
|
struct aac_dev *dev;
|
|
unsigned long byte_count = 0;
|
|
u64 addr;
|
|
int nseg;
|
|
|
|
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
|
|
// Get rid of old data
|
|
psg->count = 0;
|
|
psg->sg[0].addr[0] = 0;
|
|
psg->sg[0].addr[1] = 0;
|
|
psg->sg[0].count = 0;
|
|
|
|
nseg = scsi_dma_map(scsicmd);
|
|
BUG_ON(nseg < 0);
|
|
if (nseg) {
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
scsi_for_each_sg(scsicmd, sg, nseg, i) {
|
|
int count = sg_dma_len(sg);
|
|
addr = sg_dma_address(sg);
|
|
psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
|
|
psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
|
|
psg->sg[i].count = cpu_to_le32(count);
|
|
byte_count += count;
|
|
}
|
|
psg->count = cpu_to_le32(nseg);
|
|
/* hba wants the size to be exact */
|
|
if (byte_count > scsi_bufflen(scsicmd)) {
|
|
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
|
|
(byte_count - scsi_bufflen(scsicmd));
|
|
psg->sg[i-1].count = cpu_to_le32(temp);
|
|
byte_count = scsi_bufflen(scsicmd);
|
|
}
|
|
/* Check for command underflow */
|
|
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
|
|
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
|
|
byte_count, scsicmd->underflow);
|
|
}
|
|
}
|
|
return byte_count;
|
|
}
|
|
|
|
static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg)
|
|
{
|
|
unsigned long byte_count = 0;
|
|
int nseg;
|
|
|
|
// Get rid of old data
|
|
psg->count = 0;
|
|
psg->sg[0].next = 0;
|
|
psg->sg[0].prev = 0;
|
|
psg->sg[0].addr[0] = 0;
|
|
psg->sg[0].addr[1] = 0;
|
|
psg->sg[0].count = 0;
|
|
psg->sg[0].flags = 0;
|
|
|
|
nseg = scsi_dma_map(scsicmd);
|
|
BUG_ON(nseg < 0);
|
|
if (nseg) {
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
scsi_for_each_sg(scsicmd, sg, nseg, i) {
|
|
int count = sg_dma_len(sg);
|
|
u64 addr = sg_dma_address(sg);
|
|
psg->sg[i].next = 0;
|
|
psg->sg[i].prev = 0;
|
|
psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
|
|
psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
|
|
psg->sg[i].count = cpu_to_le32(count);
|
|
psg->sg[i].flags = 0;
|
|
byte_count += count;
|
|
}
|
|
psg->count = cpu_to_le32(nseg);
|
|
/* hba wants the size to be exact */
|
|
if (byte_count > scsi_bufflen(scsicmd)) {
|
|
u32 temp = le32_to_cpu(psg->sg[i-1].count) -
|
|
(byte_count - scsi_bufflen(scsicmd));
|
|
psg->sg[i-1].count = cpu_to_le32(temp);
|
|
byte_count = scsi_bufflen(scsicmd);
|
|
}
|
|
/* Check for command underflow */
|
|
if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
|
|
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
|
|
byte_count, scsicmd->underflow);
|
|
}
|
|
}
|
|
return byte_count;
|
|
}
|
|
|
|
#ifdef AAC_DETAILED_STATUS_INFO
|
|
|
|
struct aac_srb_status_info {
|
|
u32 status;
|
|
char *str;
|
|
};
|
|
|
|
|
|
static struct aac_srb_status_info srb_status_info[] = {
|
|
{ SRB_STATUS_PENDING, "Pending Status"},
|
|
{ SRB_STATUS_SUCCESS, "Success"},
|
|
{ SRB_STATUS_ABORTED, "Aborted Command"},
|
|
{ SRB_STATUS_ABORT_FAILED, "Abort Failed"},
|
|
{ SRB_STATUS_ERROR, "Error Event"},
|
|
{ SRB_STATUS_BUSY, "Device Busy"},
|
|
{ SRB_STATUS_INVALID_REQUEST, "Invalid Request"},
|
|
{ SRB_STATUS_INVALID_PATH_ID, "Invalid Path ID"},
|
|
{ SRB_STATUS_NO_DEVICE, "No Device"},
|
|
{ SRB_STATUS_TIMEOUT, "Timeout"},
|
|
{ SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
|
|
{ SRB_STATUS_COMMAND_TIMEOUT, "Command Timeout"},
|
|
{ SRB_STATUS_MESSAGE_REJECTED, "Message Rejected"},
|
|
{ SRB_STATUS_BUS_RESET, "Bus Reset"},
|
|
{ SRB_STATUS_PARITY_ERROR, "Parity Error"},
|
|
{ SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
|
|
{ SRB_STATUS_NO_HBA, "No HBA"},
|
|
{ SRB_STATUS_DATA_OVERRUN, "Data Overrun/Data Underrun"},
|
|
{ SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
|
|
{ SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
|
|
{ SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
|
|
{ SRB_STATUS_REQUEST_FLUSHED, "Request Flushed"},
|
|
{ SRB_STATUS_DELAYED_RETRY, "Delayed Retry"},
|
|
{ SRB_STATUS_INVALID_LUN, "Invalid LUN"},
|
|
{ SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
|
|
{ SRB_STATUS_BAD_FUNCTION, "Bad Function"},
|
|
{ SRB_STATUS_ERROR_RECOVERY, "Error Recovery"},
|
|
{ SRB_STATUS_NOT_STARTED, "Not Started"},
|
|
{ SRB_STATUS_NOT_IN_USE, "Not In Use"},
|
|
{ SRB_STATUS_FORCE_ABORT, "Force Abort"},
|
|
{ SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
|
|
{ 0xff, "Unknown Error"}
|
|
};
|
|
|
|
char *aac_get_status_string(u32 status)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(srb_status_info); i++)
|
|
if (srb_status_info[i].status == status)
|
|
return srb_status_info[i].str;
|
|
|
|
return "Bad Status Code";
|
|
}
|
|
|
|
#endif
|