mirror of
https://github.com/torvalds/linux.git
synced 2024-12-07 03:21:32 +00:00
57c80e8e5d
The goodix touchscreen driver uses a "rotated_screen" flag for systems on which the touchscreen is mounted rotated by 180 degrees with respect to the display. With the addition of support for the dt properties "touchscreen-inverted-x" and "touchscreen-inverted-y", a separate "rotated_screen" flag is not necessary anymore. This patch replaces it by setting the inverted_x and inverted_y flags instead. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
893 lines
20 KiB
C
893 lines
20 KiB
C
/*
|
|
* Driver for Goodix Touchscreens
|
|
*
|
|
* Copyright (c) 2014 Red Hat Inc.
|
|
* Copyright (c) 2015 K. Merker <merker@debian.org>
|
|
*
|
|
* This code is based on gt9xx.c authored by andrew@goodix.com:
|
|
*
|
|
* 2010 - 2012 Goodix Technology.
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/of.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
struct goodix_ts_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
int abs_x_max;
|
|
int abs_y_max;
|
|
bool swapped_x_y;
|
|
bool inverted_x;
|
|
bool inverted_y;
|
|
unsigned int max_touch_num;
|
|
unsigned int int_trigger_type;
|
|
int cfg_len;
|
|
struct gpio_desc *gpiod_int;
|
|
struct gpio_desc *gpiod_rst;
|
|
u16 id;
|
|
u16 version;
|
|
const char *cfg_name;
|
|
struct completion firmware_loading_complete;
|
|
unsigned long irq_flags;
|
|
};
|
|
|
|
#define GOODIX_GPIO_INT_NAME "irq"
|
|
#define GOODIX_GPIO_RST_NAME "reset"
|
|
|
|
#define GOODIX_MAX_HEIGHT 4096
|
|
#define GOODIX_MAX_WIDTH 4096
|
|
#define GOODIX_INT_TRIGGER 1
|
|
#define GOODIX_CONTACT_SIZE 8
|
|
#define GOODIX_MAX_CONTACTS 10
|
|
|
|
#define GOODIX_CONFIG_MAX_LENGTH 240
|
|
#define GOODIX_CONFIG_911_LENGTH 186
|
|
#define GOODIX_CONFIG_967_LENGTH 228
|
|
|
|
/* Register defines */
|
|
#define GOODIX_REG_COMMAND 0x8040
|
|
#define GOODIX_CMD_SCREEN_OFF 0x05
|
|
|
|
#define GOODIX_READ_COOR_ADDR 0x814E
|
|
#define GOODIX_REG_CONFIG_DATA 0x8047
|
|
#define GOODIX_REG_ID 0x8140
|
|
|
|
#define RESOLUTION_LOC 1
|
|
#define MAX_CONTACTS_LOC 5
|
|
#define TRIGGER_LOC 6
|
|
|
|
static const unsigned long goodix_irq_flags[] = {
|
|
IRQ_TYPE_EDGE_RISING,
|
|
IRQ_TYPE_EDGE_FALLING,
|
|
IRQ_TYPE_LEVEL_LOW,
|
|
IRQ_TYPE_LEVEL_HIGH,
|
|
};
|
|
|
|
/*
|
|
* Those tablets have their coordinates origin at the bottom right
|
|
* of the tablet, as if rotated 180 degrees
|
|
*/
|
|
static const struct dmi_system_id rotated_screen[] = {
|
|
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
|
|
{
|
|
.ident = "WinBook TW100",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
|
|
}
|
|
},
|
|
{
|
|
.ident = "WinBook TW700",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
|
|
},
|
|
},
|
|
#endif
|
|
{}
|
|
};
|
|
|
|
/**
|
|
* goodix_i2c_read - read data from a register of the i2c slave device.
|
|
*
|
|
* @client: i2c device.
|
|
* @reg: the register to read from.
|
|
* @buf: raw write data buffer.
|
|
* @len: length of the buffer to write
|
|
*/
|
|
static int goodix_i2c_read(struct i2c_client *client,
|
|
u16 reg, u8 *buf, int len)
|
|
{
|
|
struct i2c_msg msgs[2];
|
|
u16 wbuf = cpu_to_be16(reg);
|
|
int ret;
|
|
|
|
msgs[0].flags = 0;
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].len = 2;
|
|
msgs[0].buf = (u8 *)&wbuf;
|
|
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = buf;
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, 2);
|
|
return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0);
|
|
}
|
|
|
|
/**
|
|
* goodix_i2c_write - write data to a register of the i2c slave device.
|
|
*
|
|
* @client: i2c device.
|
|
* @reg: the register to write to.
|
|
* @buf: raw data buffer to write.
|
|
* @len: length of the buffer to write
|
|
*/
|
|
static int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf,
|
|
unsigned len)
|
|
{
|
|
u8 *addr_buf;
|
|
struct i2c_msg msg;
|
|
int ret;
|
|
|
|
addr_buf = kmalloc(len + 2, GFP_KERNEL);
|
|
if (!addr_buf)
|
|
return -ENOMEM;
|
|
|
|
addr_buf[0] = reg >> 8;
|
|
addr_buf[1] = reg & 0xFF;
|
|
memcpy(&addr_buf[2], buf, len);
|
|
|
|
msg.flags = 0;
|
|
msg.addr = client->addr;
|
|
msg.buf = addr_buf;
|
|
msg.len = len + 2;
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
kfree(addr_buf);
|
|
return ret < 0 ? ret : (ret != 1 ? -EIO : 0);
|
|
}
|
|
|
|
static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value)
|
|
{
|
|
return goodix_i2c_write(client, reg, &value, sizeof(value));
|
|
}
|
|
|
|
static int goodix_get_cfg_len(u16 id)
|
|
{
|
|
switch (id) {
|
|
case 911:
|
|
case 9271:
|
|
case 9110:
|
|
case 927:
|
|
case 928:
|
|
return GOODIX_CONFIG_911_LENGTH;
|
|
|
|
case 912:
|
|
case 967:
|
|
return GOODIX_CONFIG_967_LENGTH;
|
|
|
|
default:
|
|
return GOODIX_CONFIG_MAX_LENGTH;
|
|
}
|
|
}
|
|
|
|
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
|
|
{
|
|
int touch_num;
|
|
int error;
|
|
|
|
error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
|
|
GOODIX_CONTACT_SIZE + 1);
|
|
if (error) {
|
|
dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
if (!(data[0] & 0x80))
|
|
return -EAGAIN;
|
|
|
|
touch_num = data[0] & 0x0f;
|
|
if (touch_num > ts->max_touch_num)
|
|
return -EPROTO;
|
|
|
|
if (touch_num > 1) {
|
|
data += 1 + GOODIX_CONTACT_SIZE;
|
|
error = goodix_i2c_read(ts->client,
|
|
GOODIX_READ_COOR_ADDR +
|
|
1 + GOODIX_CONTACT_SIZE,
|
|
data,
|
|
GOODIX_CONTACT_SIZE * (touch_num - 1));
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
return touch_num;
|
|
}
|
|
|
|
static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
|
|
{
|
|
int id = coor_data[0] & 0x0F;
|
|
int input_x = get_unaligned_le16(&coor_data[1]);
|
|
int input_y = get_unaligned_le16(&coor_data[3]);
|
|
int input_w = get_unaligned_le16(&coor_data[5]);
|
|
|
|
/* Inversions have to happen before axis swapping */
|
|
if (ts->inverted_x)
|
|
input_x = ts->abs_x_max - input_x;
|
|
if (ts->inverted_y)
|
|
input_y = ts->abs_y_max - input_y;
|
|
if (ts->swapped_x_y)
|
|
swap(input_x, input_y);
|
|
|
|
input_mt_slot(ts->input_dev, id);
|
|
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
|
|
input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
|
|
input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
|
|
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
|
|
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
|
|
}
|
|
|
|
/**
|
|
* goodix_process_events - Process incoming events
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*
|
|
* Called when the IRQ is triggered. Read the current device state, and push
|
|
* the input events to the user space.
|
|
*/
|
|
static void goodix_process_events(struct goodix_ts_data *ts)
|
|
{
|
|
u8 point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
|
|
int touch_num;
|
|
int i;
|
|
|
|
touch_num = goodix_ts_read_input_report(ts, point_data);
|
|
if (touch_num < 0)
|
|
return;
|
|
|
|
for (i = 0; i < touch_num; i++)
|
|
goodix_ts_report_touch(ts,
|
|
&point_data[1 + GOODIX_CONTACT_SIZE * i]);
|
|
|
|
input_mt_sync_frame(ts->input_dev);
|
|
input_sync(ts->input_dev);
|
|
}
|
|
|
|
/**
|
|
* goodix_ts_irq_handler - The IRQ handler
|
|
*
|
|
* @irq: interrupt number.
|
|
* @dev_id: private data pointer.
|
|
*/
|
|
static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct goodix_ts_data *ts = dev_id;
|
|
|
|
goodix_process_events(ts);
|
|
|
|
if (goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0) < 0)
|
|
dev_err(&ts->client->dev, "I2C write end_cmd error\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void goodix_free_irq(struct goodix_ts_data *ts)
|
|
{
|
|
devm_free_irq(&ts->client->dev, ts->client->irq, ts);
|
|
}
|
|
|
|
static int goodix_request_irq(struct goodix_ts_data *ts)
|
|
{
|
|
return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
|
|
NULL, goodix_ts_irq_handler,
|
|
ts->irq_flags, ts->client->name, ts);
|
|
}
|
|
|
|
/**
|
|
* goodix_check_cfg - Checks if config fw is valid
|
|
*
|
|
* @ts: goodix_ts_data pointer
|
|
* @cfg: firmware config data
|
|
*/
|
|
static int goodix_check_cfg(struct goodix_ts_data *ts,
|
|
const struct firmware *cfg)
|
|
{
|
|
int i, raw_cfg_len;
|
|
u8 check_sum = 0;
|
|
|
|
if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) {
|
|
dev_err(&ts->client->dev,
|
|
"The length of the config fw is not correct");
|
|
return -EINVAL;
|
|
}
|
|
|
|
raw_cfg_len = cfg->size - 2;
|
|
for (i = 0; i < raw_cfg_len; i++)
|
|
check_sum += cfg->data[i];
|
|
check_sum = (~check_sum) + 1;
|
|
if (check_sum != cfg->data[raw_cfg_len]) {
|
|
dev_err(&ts->client->dev,
|
|
"The checksum of the config fw is not correct");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (cfg->data[raw_cfg_len + 1] != 1) {
|
|
dev_err(&ts->client->dev,
|
|
"Config fw must have Config_Fresh register set");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_send_cfg - Write fw config to device
|
|
*
|
|
* @ts: goodix_ts_data pointer
|
|
* @cfg: config firmware to write to device
|
|
*/
|
|
static int goodix_send_cfg(struct goodix_ts_data *ts,
|
|
const struct firmware *cfg)
|
|
{
|
|
int error;
|
|
|
|
error = goodix_check_cfg(ts, cfg);
|
|
if (error)
|
|
return error;
|
|
|
|
error = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, cfg->data,
|
|
cfg->size);
|
|
if (error) {
|
|
dev_err(&ts->client->dev, "Failed to write config data: %d",
|
|
error);
|
|
return error;
|
|
}
|
|
dev_dbg(&ts->client->dev, "Config sent successfully.");
|
|
|
|
/* Let the firmware reconfigure itself, so sleep for 10ms */
|
|
usleep_range(10000, 11000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int goodix_int_sync(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
|
|
error = gpiod_direction_output(ts->gpiod_int, 0);
|
|
if (error)
|
|
return error;
|
|
|
|
msleep(50); /* T5: 50ms */
|
|
|
|
error = gpiod_direction_input(ts->gpiod_int);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_reset - Reset device during power on
|
|
*
|
|
* @ts: goodix_ts_data pointer
|
|
*/
|
|
static int goodix_reset(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
|
|
/* begin select I2C slave addr */
|
|
error = gpiod_direction_output(ts->gpiod_rst, 0);
|
|
if (error)
|
|
return error;
|
|
|
|
msleep(20); /* T2: > 10ms */
|
|
|
|
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
|
|
error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14);
|
|
if (error)
|
|
return error;
|
|
|
|
usleep_range(100, 2000); /* T3: > 100us */
|
|
|
|
error = gpiod_direction_output(ts->gpiod_rst, 1);
|
|
if (error)
|
|
return error;
|
|
|
|
usleep_range(6000, 10000); /* T4: > 5ms */
|
|
|
|
/* end select I2C slave addr */
|
|
error = gpiod_direction_input(ts->gpiod_rst);
|
|
if (error)
|
|
return error;
|
|
|
|
error = goodix_int_sync(ts);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_get_gpio_config - Get GPIO config from ACPI/DT
|
|
*
|
|
* @ts: goodix_ts_data pointer
|
|
*/
|
|
static int goodix_get_gpio_config(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
struct device *dev;
|
|
struct gpio_desc *gpiod;
|
|
|
|
if (!ts->client)
|
|
return -EINVAL;
|
|
dev = &ts->client->dev;
|
|
|
|
/* Get the interrupt GPIO pin number */
|
|
gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
|
|
if (IS_ERR(gpiod)) {
|
|
error = PTR_ERR(gpiod);
|
|
if (error != -EPROBE_DEFER)
|
|
dev_dbg(dev, "Failed to get %s GPIO: %d\n",
|
|
GOODIX_GPIO_INT_NAME, error);
|
|
return error;
|
|
}
|
|
|
|
ts->gpiod_int = gpiod;
|
|
|
|
/* Get the reset line GPIO pin number */
|
|
gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN);
|
|
if (IS_ERR(gpiod)) {
|
|
error = PTR_ERR(gpiod);
|
|
if (error != -EPROBE_DEFER)
|
|
dev_dbg(dev, "Failed to get %s GPIO: %d\n",
|
|
GOODIX_GPIO_RST_NAME, error);
|
|
return error;
|
|
}
|
|
|
|
ts->gpiod_rst = gpiod;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_read_config - Read the embedded configuration of the panel
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*
|
|
* Must be called during probe
|
|
*/
|
|
static void goodix_read_config(struct goodix_ts_data *ts)
|
|
{
|
|
u8 config[GOODIX_CONFIG_MAX_LENGTH];
|
|
int error;
|
|
|
|
error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
|
|
config, ts->cfg_len);
|
|
if (error) {
|
|
dev_warn(&ts->client->dev,
|
|
"Error reading config (%d), using defaults\n",
|
|
error);
|
|
ts->abs_x_max = GOODIX_MAX_WIDTH;
|
|
ts->abs_y_max = GOODIX_MAX_HEIGHT;
|
|
if (ts->swapped_x_y)
|
|
swap(ts->abs_x_max, ts->abs_y_max);
|
|
ts->int_trigger_type = GOODIX_INT_TRIGGER;
|
|
ts->max_touch_num = GOODIX_MAX_CONTACTS;
|
|
return;
|
|
}
|
|
|
|
ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
|
|
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
|
|
if (ts->swapped_x_y)
|
|
swap(ts->abs_x_max, ts->abs_y_max);
|
|
ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
|
|
ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
|
|
if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
|
|
dev_err(&ts->client->dev,
|
|
"Invalid config, using defaults\n");
|
|
ts->abs_x_max = GOODIX_MAX_WIDTH;
|
|
ts->abs_y_max = GOODIX_MAX_HEIGHT;
|
|
if (ts->swapped_x_y)
|
|
swap(ts->abs_x_max, ts->abs_y_max);
|
|
ts->max_touch_num = GOODIX_MAX_CONTACTS;
|
|
}
|
|
|
|
if (dmi_check_system(rotated_screen)) {
|
|
ts->inverted_x = true;
|
|
ts->inverted_y = true;
|
|
dev_dbg(&ts->client->dev,
|
|
"Applying '180 degrees rotated screen' quirk\n");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* goodix_read_version - Read goodix touchscreen version
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*/
|
|
static int goodix_read_version(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
u8 buf[6];
|
|
char id_str[5];
|
|
|
|
error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf));
|
|
if (error) {
|
|
dev_err(&ts->client->dev, "read version failed: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
memcpy(id_str, buf, 4);
|
|
id_str[4] = 0;
|
|
if (kstrtou16(id_str, 10, &ts->id))
|
|
ts->id = 0x1001;
|
|
|
|
ts->version = get_unaligned_le16(&buf[4]);
|
|
|
|
dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id,
|
|
ts->version);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_i2c_test - I2C test function to check if the device answers.
|
|
*
|
|
* @client: the i2c client
|
|
*/
|
|
static int goodix_i2c_test(struct i2c_client *client)
|
|
{
|
|
int retry = 0;
|
|
int error;
|
|
u8 test;
|
|
|
|
while (retry++ < 2) {
|
|
error = goodix_i2c_read(client, GOODIX_REG_CONFIG_DATA,
|
|
&test, 1);
|
|
if (!error)
|
|
return 0;
|
|
|
|
dev_err(&client->dev, "i2c test failed attempt %d: %d\n",
|
|
retry, error);
|
|
msleep(20);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* goodix_request_input_dev - Allocate, populate and register the input device
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*
|
|
* Must be called during probe
|
|
*/
|
|
static int goodix_request_input_dev(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
|
|
ts->input_dev = devm_input_allocate_device(&ts->client->dev);
|
|
if (!ts->input_dev) {
|
|
dev_err(&ts->client->dev, "Failed to allocate input device.");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
|
|
0, ts->abs_x_max, 0, 0);
|
|
input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
|
|
0, ts->abs_y_max, 0, 0);
|
|
input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
|
|
input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
|
|
|
|
input_mt_init_slots(ts->input_dev, ts->max_touch_num,
|
|
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
|
|
|
|
ts->input_dev->name = "Goodix Capacitive TouchScreen";
|
|
ts->input_dev->phys = "input/ts";
|
|
ts->input_dev->id.bustype = BUS_I2C;
|
|
ts->input_dev->id.vendor = 0x0416;
|
|
ts->input_dev->id.product = ts->id;
|
|
ts->input_dev->id.version = ts->version;
|
|
|
|
error = input_register_device(ts->input_dev);
|
|
if (error) {
|
|
dev_err(&ts->client->dev,
|
|
"Failed to register input device: %d", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_configure_dev - Finish device initialization
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*
|
|
* Must be called from probe to finish initialization of the device.
|
|
* Contains the common initialization code for both devices that
|
|
* declare gpio pins and devices that do not. It is either called
|
|
* directly from probe or from request_firmware_wait callback.
|
|
*/
|
|
static int goodix_configure_dev(struct goodix_ts_data *ts)
|
|
{
|
|
int error;
|
|
|
|
ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
|
|
"touchscreen-swapped-x-y");
|
|
ts->inverted_x = device_property_read_bool(&ts->client->dev,
|
|
"touchscreen-inverted-x");
|
|
ts->inverted_y = device_property_read_bool(&ts->client->dev,
|
|
"touchscreen-inverted-y");
|
|
|
|
goodix_read_config(ts);
|
|
|
|
error = goodix_request_input_dev(ts);
|
|
if (error)
|
|
return error;
|
|
|
|
ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
|
|
error = goodix_request_irq(ts);
|
|
if (error) {
|
|
dev_err(&ts->client->dev, "request IRQ failed: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* goodix_config_cb - Callback to finish device init
|
|
*
|
|
* @ts: our goodix_ts_data pointer
|
|
*
|
|
* request_firmware_wait callback that finishes
|
|
* initialization of the device.
|
|
*/
|
|
static void goodix_config_cb(const struct firmware *cfg, void *ctx)
|
|
{
|
|
struct goodix_ts_data *ts = ctx;
|
|
int error;
|
|
|
|
if (cfg) {
|
|
/* send device configuration to the firmware */
|
|
error = goodix_send_cfg(ts, cfg);
|
|
if (error)
|
|
goto err_release_cfg;
|
|
}
|
|
|
|
goodix_configure_dev(ts);
|
|
|
|
err_release_cfg:
|
|
release_firmware(cfg);
|
|
complete_all(&ts->firmware_loading_complete);
|
|
}
|
|
|
|
static int goodix_ts_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct goodix_ts_data *ts;
|
|
int error;
|
|
|
|
dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "I2C check functionality failed.\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
|
|
if (!ts)
|
|
return -ENOMEM;
|
|
|
|
ts->client = client;
|
|
i2c_set_clientdata(client, ts);
|
|
init_completion(&ts->firmware_loading_complete);
|
|
|
|
error = goodix_get_gpio_config(ts);
|
|
if (error)
|
|
return error;
|
|
|
|
if (ts->gpiod_int && ts->gpiod_rst) {
|
|
/* reset the controller */
|
|
error = goodix_reset(ts);
|
|
if (error) {
|
|
dev_err(&client->dev, "Controller reset failed.\n");
|
|
return error;
|
|
}
|
|
}
|
|
|
|
error = goodix_i2c_test(client);
|
|
if (error) {
|
|
dev_err(&client->dev, "I2C communication failure: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = goodix_read_version(ts);
|
|
if (error) {
|
|
dev_err(&client->dev, "Read version failed.\n");
|
|
return error;
|
|
}
|
|
|
|
ts->cfg_len = goodix_get_cfg_len(ts->id);
|
|
|
|
if (ts->gpiod_int && ts->gpiod_rst) {
|
|
/* update device config */
|
|
ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL,
|
|
"goodix_%d_cfg.bin", ts->id);
|
|
if (!ts->cfg_name)
|
|
return -ENOMEM;
|
|
|
|
error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name,
|
|
&client->dev, GFP_KERNEL, ts,
|
|
goodix_config_cb);
|
|
if (error) {
|
|
dev_err(&client->dev,
|
|
"Failed to invoke firmware loader: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
} else {
|
|
error = goodix_configure_dev(ts);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int goodix_ts_remove(struct i2c_client *client)
|
|
{
|
|
struct goodix_ts_data *ts = i2c_get_clientdata(client);
|
|
|
|
if (ts->gpiod_int && ts->gpiod_rst)
|
|
wait_for_completion(&ts->firmware_loading_complete);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused goodix_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct goodix_ts_data *ts = i2c_get_clientdata(client);
|
|
int error;
|
|
|
|
/* We need gpio pins to suspend/resume */
|
|
if (!ts->gpiod_int || !ts->gpiod_rst)
|
|
return 0;
|
|
|
|
wait_for_completion(&ts->firmware_loading_complete);
|
|
|
|
/* Free IRQ as IRQ pin is used as output in the suspend sequence */
|
|
goodix_free_irq(ts);
|
|
|
|
/* Output LOW on the INT pin for 5 ms */
|
|
error = gpiod_direction_output(ts->gpiod_int, 0);
|
|
if (error) {
|
|
goodix_request_irq(ts);
|
|
return error;
|
|
}
|
|
|
|
usleep_range(5000, 6000);
|
|
|
|
error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND,
|
|
GOODIX_CMD_SCREEN_OFF);
|
|
if (error) {
|
|
dev_err(&ts->client->dev, "Screen off command failed\n");
|
|
gpiod_direction_input(ts->gpiod_int);
|
|
goodix_request_irq(ts);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* The datasheet specifies that the interval between sending screen-off
|
|
* command and wake-up should be longer than 58 ms. To avoid waking up
|
|
* sooner, delay 58ms here.
|
|
*/
|
|
msleep(58);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused goodix_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct goodix_ts_data *ts = i2c_get_clientdata(client);
|
|
int error;
|
|
|
|
if (!ts->gpiod_int || !ts->gpiod_rst)
|
|
return 0;
|
|
|
|
/*
|
|
* Exit sleep mode by outputting HIGH level to INT pin
|
|
* for 2ms~5ms.
|
|
*/
|
|
error = gpiod_direction_output(ts->gpiod_int, 1);
|
|
if (error)
|
|
return error;
|
|
|
|
usleep_range(2000, 5000);
|
|
|
|
error = goodix_int_sync(ts);
|
|
if (error)
|
|
return error;
|
|
|
|
error = goodix_request_irq(ts);
|
|
if (error)
|
|
return error;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume);
|
|
|
|
static const struct i2c_device_id goodix_ts_id[] = {
|
|
{ "GDIX1001:00", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id goodix_acpi_match[] = {
|
|
{ "GDIX1001", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id goodix_of_match[] = {
|
|
{ .compatible = "goodix,gt911" },
|
|
{ .compatible = "goodix,gt9110" },
|
|
{ .compatible = "goodix,gt912" },
|
|
{ .compatible = "goodix,gt927" },
|
|
{ .compatible = "goodix,gt9271" },
|
|
{ .compatible = "goodix,gt928" },
|
|
{ .compatible = "goodix,gt967" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, goodix_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver goodix_ts_driver = {
|
|
.probe = goodix_ts_probe,
|
|
.remove = goodix_ts_remove,
|
|
.id_table = goodix_ts_id,
|
|
.driver = {
|
|
.name = "Goodix-TS",
|
|
.acpi_match_table = ACPI_PTR(goodix_acpi_match),
|
|
.of_match_table = of_match_ptr(goodix_of_match),
|
|
.pm = &goodix_pm_ops,
|
|
},
|
|
};
|
|
module_i2c_driver(goodix_ts_driver);
|
|
|
|
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
|
|
MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
|
|
MODULE_DESCRIPTION("Goodix touchscreen driver");
|
|
MODULE_LICENSE("GPL v2");
|