mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
9fadbda6d1
The commit036d6a4e75("ABI: sysfs-class-hwmon: add ABI documentation for it") moved all ABI attributes to the usual ABI documentation. But this change left a stray colon for the fan speed control method. Fix this to avoid a confusion of readers. Fixes:036d6a4e75("ABI: sysfs-class-hwmon: add ABI documentation for it") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20230312155714.17290-1-stefan.wahren@i2se.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
657 lines
18 KiB
ReStructuredText
657 lines
18 KiB
ReStructuredText
Naming and data format standards for sysfs files
|
|
================================================
|
|
|
|
The libsensors library offers an interface to the raw sensors data
|
|
through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
|
|
completely chip-independent. It assumes that all the kernel drivers
|
|
implement the standard sysfs interface described in this document.
|
|
This makes adding or updating support for any given chip very easy, as
|
|
libsensors, and applications using it, do not need to be modified.
|
|
This is a major improvement compared to lm-sensors 2.
|
|
|
|
Note that motherboards vary widely in the connections to sensor chips.
|
|
There is no standard that ensures, for example, that the second
|
|
temperature sensor is connected to the CPU, or that the second fan is on
|
|
the CPU. Also, some values reported by the chips need some computation
|
|
before they make full sense. For example, most chips can only measure
|
|
voltages between 0 and +4V. Other voltages are scaled back into that
|
|
range using external resistors. Since the values of these resistors
|
|
can change from motherboard to motherboard, the conversions cannot be
|
|
hard coded into the driver and have to be done in user space.
|
|
|
|
For this reason, even if we aim at a chip-independent libsensors, it will
|
|
still require a configuration file (e.g. /etc/sensors.conf) for proper
|
|
values conversion, labeling of inputs and hiding of unused inputs.
|
|
|
|
An alternative method that some programs use is to access the sysfs
|
|
files directly. This document briefly describes the standards that the
|
|
drivers follow, so that an application program can scan for entries and
|
|
access this data in a simple and consistent way. That said, such programs
|
|
will have to implement conversion, labeling and hiding of inputs. For
|
|
this reason, it is still not recommended to bypass the library.
|
|
|
|
Each chip gets its own directory in the sysfs /sys/devices tree. To
|
|
find all sensor chips, it is easier to follow the device symlinks from
|
|
`/sys/class/hwmon/hwmon*`.
|
|
|
|
Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
|
|
in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
|
|
in the hwmon "class" device directory are also supported. Complex drivers
|
|
(e.g. drivers for multifunction chips) may want to use this possibility to
|
|
avoid namespace pollution. The only drawback will be that older versions of
|
|
libsensors won't support the driver in question.
|
|
|
|
All sysfs values are fixed point numbers.
|
|
|
|
There is only one value per file, unlike the older /proc specification.
|
|
The common scheme for files naming is: <type><number>_<item>. Usual
|
|
types for sensor chips are "in" (voltage), "temp" (temperature) and
|
|
"fan" (fan). Usual items are "input" (measured value), "max" (high
|
|
threshold, "min" (low threshold). Numbering usually starts from 1,
|
|
except for voltages which start from 0 (because most data sheets use
|
|
this). A number is always used for elements that can be present more
|
|
than once, even if there is a single element of the given type on the
|
|
specific chip. Other files do not refer to a specific element, so
|
|
they have a simple name, and no number.
|
|
|
|
Alarms are direct indications read from the chips. The drivers do NOT
|
|
make comparisons of readings to thresholds. This allows violations
|
|
between readings to be caught and alarmed. The exact definition of an
|
|
alarm (for example, whether a threshold must be met or must be exceeded
|
|
to cause an alarm) is chip-dependent.
|
|
|
|
When setting values of hwmon sysfs attributes, the string representation of
|
|
the desired value must be written, note that strings which are not a number
|
|
are interpreted as 0! For more on how written strings are interpreted see the
|
|
"sysfs attribute writes interpretation" section at the end of this file.
|
|
|
|
Attribute access
|
|
----------------
|
|
|
|
Hardware monitoring sysfs attributes are displayed by unrestricted userspace
|
|
applications. For this reason, all standard ABI attributes shall be world
|
|
readable. Writeable standard ABI attributes shall be writeable only for
|
|
privileged users.
|
|
|
|
-------------------------------------------------------------------------
|
|
|
|
======= ===========================================
|
|
`[0-*]` denotes any positive number starting from 0
|
|
`[1-*]` denotes any positive number starting from 1
|
|
RO read only value
|
|
WO write only value
|
|
RW read/write value
|
|
======= ===========================================
|
|
|
|
Read/write values may be read-only for some chips, depending on the
|
|
hardware implementation.
|
|
|
|
All entries (except name) are optional, and should only be created in a
|
|
given driver if the chip has the feature.
|
|
|
|
See Documentation/ABI/testing/sysfs-class-hwmon for a complete description
|
|
of the attributes.
|
|
|
|
*****************
|
|
Global attributes
|
|
*****************
|
|
|
|
`name`
|
|
The chip name.
|
|
|
|
`label`
|
|
A descriptive label that allows to uniquely identify a device
|
|
within the system.
|
|
|
|
`update_interval`
|
|
The interval at which the chip will update readings.
|
|
|
|
|
|
********
|
|
Voltages
|
|
********
|
|
|
|
`in[0-*]_min`
|
|
Voltage min value.
|
|
|
|
`in[0-*]_lcrit`
|
|
Voltage critical min value.
|
|
|
|
`in[0-*]_max`
|
|
Voltage max value.
|
|
|
|
`in[0-*]_crit`
|
|
Voltage critical max value.
|
|
|
|
`in[0-*]_input`
|
|
Voltage input value.
|
|
|
|
`in[0-*]_average`
|
|
Average voltage
|
|
|
|
`in[0-*]_lowest`
|
|
Historical minimum voltage
|
|
|
|
`in[0-*]_highest`
|
|
Historical maximum voltage
|
|
|
|
`in[0-*]_reset_history`
|
|
Reset inX_lowest and inX_highest
|
|
|
|
`in_reset_history`
|
|
Reset inX_lowest and inX_highest for all sensors
|
|
|
|
`in[0-*]_label`
|
|
Suggested voltage channel label.
|
|
|
|
`in[0-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
`cpu[0-*]_vid`
|
|
CPU core reference voltage.
|
|
|
|
`vrm`
|
|
Voltage Regulator Module version number.
|
|
|
|
`in[0-*]_rated_min`
|
|
Minimum rated voltage.
|
|
|
|
`in[0-*]_rated_max`
|
|
Maximum rated voltage.
|
|
|
|
Also see the Alarms section for status flags associated with voltages.
|
|
|
|
|
|
****
|
|
Fans
|
|
****
|
|
|
|
`fan[1-*]_min`
|
|
Fan minimum value
|
|
|
|
`fan[1-*]_max`
|
|
Fan maximum value
|
|
|
|
`fan[1-*]_input`
|
|
Fan input value.
|
|
|
|
`fan[1-*]_div`
|
|
Fan divisor.
|
|
|
|
`fan[1-*]_pulses`
|
|
Number of tachometer pulses per fan revolution.
|
|
|
|
`fan[1-*]_target`
|
|
Desired fan speed
|
|
|
|
`fan[1-*]_label`
|
|
Suggested fan channel label.
|
|
|
|
`fan[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
Also see the Alarms section for status flags associated with fans.
|
|
|
|
|
|
***
|
|
PWM
|
|
***
|
|
|
|
`pwm[1-*]`
|
|
Pulse width modulation fan control.
|
|
|
|
`pwm[1-*]_enable`
|
|
Fan speed control method.
|
|
|
|
`pwm[1-*]_mode`
|
|
direct current or pulse-width modulation.
|
|
|
|
`pwm[1-*]_freq`
|
|
Base PWM frequency in Hz.
|
|
|
|
`pwm[1-*]_auto_channels_temp`
|
|
Select which temperature channels affect this PWM output in
|
|
auto mode.
|
|
|
|
`pwm[1-*]_auto_point[1-*]_pwm` / `pwm[1-*]_auto_point[1-*]_temp` / `pwm[1-*]_auto_point[1-*]_temp_hyst`
|
|
Define the PWM vs temperature curve.
|
|
|
|
`temp[1-*]_auto_point[1-*]_pwm` / `temp[1-*]_auto_point[1-*]_temp` / `temp[1-*]_auto_point[1-*]_temp_hyst`
|
|
Define the PWM vs temperature curve.
|
|
|
|
There is a third case where trip points are associated to both PWM output
|
|
channels and temperature channels: the PWM values are associated to PWM
|
|
output channels while the temperature values are associated to temperature
|
|
channels. In that case, the result is determined by the mapping between
|
|
temperature inputs and PWM outputs. When several temperature inputs are
|
|
mapped to a given PWM output, this leads to several candidate PWM values.
|
|
The actual result is up to the chip, but in general the highest candidate
|
|
value (fastest fan speed) wins.
|
|
|
|
|
|
************
|
|
Temperatures
|
|
************
|
|
|
|
`temp[1-*]_type`
|
|
Sensor type selection.
|
|
|
|
`temp[1-*]_max`
|
|
Temperature max value.
|
|
|
|
`temp[1-*]_min`
|
|
Temperature min value.
|
|
|
|
`temp[1-*]_max_hyst`
|
|
Temperature hysteresis value for max limit.
|
|
|
|
`temp[1-*]_min_hyst`
|
|
Temperature hysteresis value for min limit.
|
|
|
|
`temp[1-*]_input`
|
|
Temperature input value.
|
|
|
|
`temp[1-*]_crit`
|
|
Temperature critical max value, typically greater than
|
|
corresponding temp_max values.
|
|
|
|
`temp[1-*]_crit_hyst`
|
|
Temperature hysteresis value for critical limit.
|
|
|
|
`temp[1-*]_emergency`
|
|
Temperature emergency max value, for chips supporting more than
|
|
two upper temperature limits.
|
|
|
|
`temp[1-*]_emergency_hyst`
|
|
Temperature hysteresis value for emergency limit.
|
|
|
|
`temp[1-*]_lcrit`
|
|
Temperature critical min value, typically lower than
|
|
corresponding temp_min values.
|
|
|
|
`temp[1-*]_lcrit_hyst`
|
|
Temperature hysteresis value for critical min limit.
|
|
|
|
`temp[1-*]_offset`
|
|
Temperature offset which is added to the temperature reading
|
|
by the chip.
|
|
|
|
`temp[1-*]_label`
|
|
Suggested temperature channel label.
|
|
|
|
`temp[1-*]_lowest`
|
|
Historical minimum temperature
|
|
|
|
`temp[1-*]_highest`
|
|
Historical maximum temperature
|
|
|
|
`temp[1-*]_reset_history`
|
|
Reset temp_lowest and temp_highest
|
|
|
|
`temp_reset_history`
|
|
Reset temp_lowest and temp_highest for all sensors
|
|
|
|
`temp[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
`temp[1-*]_rated_min`
|
|
Minimum rated temperature.
|
|
|
|
`temp[1-*]_rated_max`
|
|
Maximum rated temperature.
|
|
|
|
Some chips measure temperature using external thermistors and an ADC, and
|
|
report the temperature measurement as a voltage. Converting this voltage
|
|
back to a temperature (or the other way around for limits) requires
|
|
mathematical functions not available in the kernel, so the conversion
|
|
must occur in user space. For these chips, all temp* files described
|
|
above should contain values expressed in millivolt instead of millidegree
|
|
Celsius. In other words, such temperature channels are handled as voltage
|
|
channels by the driver.
|
|
|
|
Also see the Alarms section for status flags associated with temperatures.
|
|
|
|
|
|
********
|
|
Currents
|
|
********
|
|
|
|
`curr[1-*]_max`
|
|
Current max value.
|
|
|
|
`curr[1-*]_min`
|
|
Current min value.
|
|
|
|
`curr[1-*]_lcrit`
|
|
Current critical low value
|
|
|
|
`curr[1-*]_crit`
|
|
Current critical high value.
|
|
|
|
`curr[1-*]_input`
|
|
Current input value.
|
|
|
|
`curr[1-*]_average`
|
|
Average current use.
|
|
|
|
`curr[1-*]_lowest`
|
|
Historical minimum current.
|
|
|
|
`curr[1-*]_highest`
|
|
Historical maximum current.
|
|
|
|
`curr[1-*]_reset_history`
|
|
Reset currX_lowest and currX_highest
|
|
|
|
WO
|
|
|
|
`curr_reset_history`
|
|
Reset currX_lowest and currX_highest for all sensors.
|
|
|
|
`curr[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
`curr[1-*]_rated_min`
|
|
Minimum rated current.
|
|
|
|
`curr[1-*]_rated_max`
|
|
Maximum rated current.
|
|
|
|
Also see the Alarms section for status flags associated with currents.
|
|
|
|
*****
|
|
Power
|
|
*****
|
|
|
|
`power[1-*]_average`
|
|
Average power use.
|
|
|
|
`power[1-*]_average_interval`
|
|
Power use averaging interval.
|
|
|
|
`power[1-*]_average_interval_max`
|
|
Maximum power use averaging interval.
|
|
|
|
`power[1-*]_average_interval_min`
|
|
Minimum power use averaging interval.
|
|
|
|
`power[1-*]_average_highest`
|
|
Historical average maximum power use
|
|
|
|
`power[1-*]_average_lowest`
|
|
Historical average minimum power use
|
|
|
|
`power[1-*]_average_max`
|
|
A poll notification is sent to `power[1-*]_average` when
|
|
power use rises above this value.
|
|
|
|
`power[1-*]_average_min`
|
|
A poll notification is sent to `power[1-*]_average` when
|
|
power use sinks below this value.
|
|
|
|
`power[1-*]_input`
|
|
Instantaneous power use.
|
|
|
|
`power[1-*]_input_highest`
|
|
Historical maximum power use
|
|
|
|
`power[1-*]_input_lowest`
|
|
Historical minimum power use.
|
|
|
|
`power[1-*]_reset_history`
|
|
Reset input_highest, input_lowest, average_highest and
|
|
average_lowest.
|
|
|
|
`power[1-*]_accuracy`
|
|
Accuracy of the power meter.
|
|
|
|
`power[1-*]_cap`
|
|
If power use rises above this limit, the
|
|
system should take action to reduce power use.
|
|
|
|
`power[1-*]_cap_hyst`
|
|
Margin of hysteresis built around capping and notification.
|
|
|
|
`power[1-*]_cap_max`
|
|
Maximum cap that can be set.
|
|
|
|
`power[1-*]_cap_min`
|
|
Minimum cap that can be set.
|
|
|
|
`power[1-*]_max`
|
|
Maximum power.
|
|
|
|
`power[1-*]_crit`
|
|
Critical maximum power.
|
|
|
|
If power rises to or above this limit, the
|
|
system is expected take drastic action to reduce
|
|
power consumption, such as a system shutdown or
|
|
a forced powerdown of some devices.
|
|
|
|
Unit: microWatt
|
|
|
|
RW
|
|
|
|
`power[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return
|
|
-ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
`power[1-*]_rated_min`
|
|
Minimum rated power.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
`power[1-*]_rated_max`
|
|
Maximum rated power.
|
|
|
|
Unit: microWatt
|
|
|
|
RO
|
|
|
|
Also see the Alarms section for status flags associated with power readings.
|
|
|
|
******
|
|
Energy
|
|
******
|
|
|
|
`energy[1-*]_input`
|
|
Cumulative energy use
|
|
|
|
Unit: microJoule
|
|
|
|
RO
|
|
|
|
`energy[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
When disabled the sensor read will return
|
|
-ENODATA.
|
|
|
|
- 1: Enable
|
|
- 0: Disable
|
|
|
|
RW
|
|
|
|
********
|
|
Humidity
|
|
********
|
|
|
|
`humidity[1-*]_input`
|
|
Humidity.
|
|
|
|
`humidity[1-*]_enable`
|
|
Enable or disable the sensors.
|
|
|
|
`humidity[1-*]_rated_min`
|
|
Minimum rated humidity.
|
|
|
|
`humidity[1-*]_rated_max`
|
|
Maximum rated humidity.
|
|
|
|
******
|
|
Alarms
|
|
******
|
|
|
|
Each channel or limit may have an associated alarm file, containing a
|
|
boolean value. 1 means than an alarm condition exists, 0 means no alarm.
|
|
|
|
Usually a given chip will either use channel-related alarms, or
|
|
limit-related alarms, not both. The driver should just reflect the hardware
|
|
implementation.
|
|
|
|
+-------------------------------+-----------------------+
|
|
| **`in[0-*]_alarm`, | Channel alarm |
|
|
| `curr[1-*]_alarm`, | |
|
|
| `power[1-*]_alarm`, | - 0: no alarm |
|
|
| `fan[1-*]_alarm`, | - 1: alarm |
|
|
| `temp[1-*]_alarm`** | |
|
|
| | RO |
|
|
+-------------------------------+-----------------------+
|
|
|
|
**OR**
|
|
|
|
+-------------------------------+-----------------------+
|
|
| **`in[0-*]_min_alarm`, | Limit alarm |
|
|
| `in[0-*]_max_alarm`, | |
|
|
| `in[0-*]_lcrit_alarm`, | - 0: no alarm |
|
|
| `in[0-*]_crit_alarm`, | - 1: alarm |
|
|
| `curr[1-*]_min_alarm`, | |
|
|
| `curr[1-*]_max_alarm`, | RO |
|
|
| `curr[1-*]_lcrit_alarm`, | |
|
|
| `curr[1-*]_crit_alarm`, | |
|
|
| `power[1-*]_cap_alarm`, | |
|
|
| `power[1-*]_max_alarm`, | |
|
|
| `power[1-*]_crit_alarm`, | |
|
|
| `fan[1-*]_min_alarm`, | |
|
|
| `fan[1-*]_max_alarm`, | |
|
|
| `temp[1-*]_min_alarm`, | |
|
|
| `temp[1-*]_max_alarm`, | |
|
|
| `temp[1-*]_lcrit_alarm`, | |
|
|
| `temp[1-*]_crit_alarm`, | |
|
|
| `temp[1-*]_emergency_alarm`** | |
|
|
+-------------------------------+-----------------------+
|
|
|
|
Each input channel may have an associated fault file. This can be used
|
|
to notify open diodes, unconnected fans etc. where the hardware
|
|
supports it. When this boolean has value 1, the measurement for that
|
|
channel should not be trusted.
|
|
|
|
`fan[1-*]_fault` / `temp[1-*]_fault`
|
|
Input fault condition.
|
|
|
|
Some chips also offer the possibility to get beeped when an alarm occurs:
|
|
|
|
`beep_enable`
|
|
Master beep enable.
|
|
|
|
`in[0-*]_beep`, `curr[1-*]_beep`, `fan[1-*]_beep`, `temp[1-*]_beep`,
|
|
Channel beep.
|
|
|
|
In theory, a chip could provide per-limit beep masking, but no such chip
|
|
was seen so far.
|
|
|
|
Old drivers provided a different, non-standard interface to alarms and
|
|
beeps. These interface files are deprecated, but will be kept around
|
|
for compatibility reasons:
|
|
|
|
`alarms`
|
|
Alarm bitmask.
|
|
|
|
`beep_mask`
|
|
Bitmask for beep.
|
|
|
|
|
|
*******************
|
|
Intrusion detection
|
|
*******************
|
|
|
|
`intrusion[0-*]_alarm`
|
|
Chassis intrusion detection.
|
|
|
|
`intrusion[0-*]_beep`
|
|
Chassis intrusion beep.
|
|
|
|
****************************
|
|
Average sample configuration
|
|
****************************
|
|
|
|
Devices allowing for reading {in,power,curr,temp}_average values may export
|
|
attributes for controlling number of samples used to compute average.
|
|
|
|
+--------------+---------------------------------------------------------------+
|
|
| samples | Sets number of average samples for all types of measurements. |
|
|
| | |
|
|
| | RW |
|
|
+--------------+---------------------------------------------------------------+
|
|
| in_samples | Sets number of average samples for specific type of |
|
|
| power_samples| measurements. |
|
|
| curr_samples | |
|
|
| temp_samples | Note that on some devices it won't be possible to set all of |
|
|
| | them to different values so changing one might also change |
|
|
| | some others. |
|
|
| | |
|
|
| | RW |
|
|
+--------------+---------------------------------------------------------------+
|
|
|
|
sysfs attribute writes interpretation
|
|
-------------------------------------
|
|
|
|
hwmon sysfs attributes always contain numbers, so the first thing to do is to
|
|
convert the input to a number, there are 2 ways todo this depending whether
|
|
the number can be negative or not::
|
|
|
|
unsigned long u = simple_strtoul(buf, NULL, 10);
|
|
long s = simple_strtol(buf, NULL, 10);
|
|
|
|
With buf being the buffer with the user input being passed by the kernel.
|
|
Notice that we do not use the second argument of strto[u]l, and thus cannot
|
|
tell when 0 is returned, if this was really 0 or is caused by invalid input.
|
|
This is done deliberately as checking this everywhere would add a lot of
|
|
code to the kernel.
|
|
|
|
Notice that it is important to always store the converted value in an
|
|
unsigned long or long, so that no wrap around can happen before any further
|
|
checking.
|
|
|
|
After the input string is converted to an (unsigned) long, the value should be
|
|
checked if its acceptable. Be careful with further conversions on the value
|
|
before checking it for validity, as these conversions could still cause a wrap
|
|
around before the check. For example do not multiply the result, and only
|
|
add/subtract if it has been divided before the add/subtract.
|
|
|
|
What to do if a value is found to be invalid, depends on the type of the
|
|
sysfs attribute that is being set. If it is a continuous setting like a
|
|
tempX_max or inX_max attribute, then the value should be clamped to its
|
|
limits using clamp_val(value, min_limit, max_limit). If it is not continuous
|
|
like for example a tempX_type, then when an invalid value is written,
|
|
-EINVAL should be returned.
|
|
|
|
Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees)::
|
|
|
|
long v = simple_strtol(buf, NULL, 10) / 1000;
|
|
v = clamp_val(v, -128, 127);
|
|
/* write v to register */
|
|
|
|
Example2, fan divider setting, valid values 2, 4 and 8::
|
|
|
|
unsigned long v = simple_strtoul(buf, NULL, 10);
|
|
|
|
switch (v) {
|
|
case 2: v = 1; break;
|
|
case 4: v = 2; break;
|
|
case 8: v = 3; break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* write v to register */
|