mirror of
https://github.com/torvalds/linux.git
synced 2024-12-21 18:42:44 +00:00
415060b21f
When the usb phy device mode is set to "drd", the USB port will switch between device and host modes depending on what's plugged into the port. Customers have asked for the ability to force host or device mode from software. This commit adds sysfs entries to the phy device that allow this. The sysfs for the phy device can be found at: /sys/bus/platform/drivers/brcmstb-usb-phy/*.usb-phy The following sysfs entries were added: - "dr_mode" (RO) - The current phy "dr_mode" setting. It will be set to one of the following values: - "host" - host mode - "peripheral " - device mode - "drd" - switch between device and host mode based on installed device - "typec-pd" - device/host mode is controller by the USB Type-C PD protocol. If "dr_mode" is "drd" - "drd_select" (RW) - It will be set to one of the following values: - "host" - force host mode - "device" - force device mode - "auto" - allow normal auto selection of host/device based on inserted USB device Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
460 lines
12 KiB
C
460 lines
12 KiB
C
/*
|
|
* phy-brcm-usb.c - Broadcom USB Phy Driver
|
|
*
|
|
* Copyright (C) 2015-2017 Broadcom
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/soc/brcmstb/brcmstb.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#include "phy-brcm-usb-init.h"
|
|
|
|
static DEFINE_MUTEX(sysfs_lock);
|
|
|
|
enum brcm_usb_phy_id {
|
|
BRCM_USB_PHY_2_0 = 0,
|
|
BRCM_USB_PHY_3_0,
|
|
BRCM_USB_PHY_ID_MAX
|
|
};
|
|
|
|
struct value_to_name_map {
|
|
int value;
|
|
const char *name;
|
|
};
|
|
|
|
static struct value_to_name_map brcm_dr_mode_to_name[] = {
|
|
{ USB_CTLR_MODE_HOST, "host" },
|
|
{ USB_CTLR_MODE_DEVICE, "peripheral" },
|
|
{ USB_CTLR_MODE_DRD, "drd" },
|
|
{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
|
|
};
|
|
|
|
static struct value_to_name_map brcm_dual_mode_to_name[] = {
|
|
{ 0, "host" },
|
|
{ 1, "device" },
|
|
{ 2, "auto" },
|
|
};
|
|
|
|
struct brcm_usb_phy {
|
|
struct phy *phy;
|
|
unsigned int id;
|
|
bool inited;
|
|
};
|
|
|
|
struct brcm_usb_phy_data {
|
|
struct brcm_usb_init_params ini;
|
|
bool has_eohci;
|
|
bool has_xhci;
|
|
struct clk *usb_20_clk;
|
|
struct clk *usb_30_clk;
|
|
struct mutex mutex; /* serialize phy init */
|
|
int init_count;
|
|
struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX];
|
|
};
|
|
|
|
static int brcm_usb_phy_init(struct phy *gphy)
|
|
{
|
|
struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
|
|
struct brcm_usb_phy_data *priv =
|
|
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
|
|
|
|
/*
|
|
* Use a lock to make sure a second caller waits until
|
|
* the base phy is inited before using it.
|
|
*/
|
|
mutex_lock(&priv->mutex);
|
|
if (priv->init_count++ == 0) {
|
|
clk_enable(priv->usb_20_clk);
|
|
clk_enable(priv->usb_30_clk);
|
|
brcm_usb_init_common(&priv->ini);
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
if (phy->id == BRCM_USB_PHY_2_0)
|
|
brcm_usb_init_eohci(&priv->ini);
|
|
else if (phy->id == BRCM_USB_PHY_3_0)
|
|
brcm_usb_init_xhci(&priv->ini);
|
|
phy->inited = true;
|
|
dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
|
|
priv->init_count);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_exit(struct phy *gphy)
|
|
{
|
|
struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
|
|
struct brcm_usb_phy_data *priv =
|
|
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
|
|
|
|
dev_dbg(&gphy->dev, "EXIT\n");
|
|
if (phy->id == BRCM_USB_PHY_2_0)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
if (phy->id == BRCM_USB_PHY_3_0)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
|
|
/* If both xhci and eohci are gone, reset everything else */
|
|
mutex_lock(&priv->mutex);
|
|
if (--priv->init_count == 0) {
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable(priv->usb_20_clk);
|
|
clk_disable(priv->usb_30_clk);
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
phy->inited = false;
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops brcm_usb_phy_ops = {
|
|
.init = brcm_usb_phy_init,
|
|
.exit = brcm_usb_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *brcm_usb_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* values 0 and 1 are for backward compatibility with
|
|
* device tree nodes from older bootloaders.
|
|
*/
|
|
switch (args->args[0]) {
|
|
case 0:
|
|
case PHY_TYPE_USB2:
|
|
if (data->phys[BRCM_USB_PHY_2_0].phy)
|
|
return data->phys[BRCM_USB_PHY_2_0].phy;
|
|
dev_warn(dev, "Error, 2.0 Phy not found\n");
|
|
break;
|
|
case 1:
|
|
case PHY_TYPE_USB3:
|
|
if (data->phys[BRCM_USB_PHY_3_0].phy)
|
|
return data->phys[BRCM_USB_PHY_3_0].phy;
|
|
dev_warn(dev, "Error, 3.0 Phy not found\n");
|
|
break;
|
|
}
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static int name_to_value(struct value_to_name_map *table, int count,
|
|
const char *name, int *value)
|
|
{
|
|
int x;
|
|
|
|
*value = 0;
|
|
for (x = 0; x < count; x++) {
|
|
if (sysfs_streq(name, table[x].name)) {
|
|
*value = x;
|
|
return 0;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *value_to_name(struct value_to_name_map *table, int count,
|
|
int value)
|
|
{
|
|
if (value >= count)
|
|
return "unknown";
|
|
return table[value].name;
|
|
}
|
|
|
|
static ssize_t dr_mode_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n",
|
|
value_to_name(&brcm_dr_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dr_mode_to_name),
|
|
priv->ini.mode));
|
|
}
|
|
static DEVICE_ATTR_RO(dr_mode);
|
|
|
|
static ssize_t dual_select_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
int value;
|
|
int res;
|
|
|
|
mutex_lock(&sysfs_lock);
|
|
res = name_to_value(&brcm_dual_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
|
|
if (!res) {
|
|
brcm_usb_init_set_dual_select(&priv->ini, value);
|
|
res = len;
|
|
}
|
|
mutex_unlock(&sysfs_lock);
|
|
return res;
|
|
}
|
|
|
|
static ssize_t dual_select_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
int value;
|
|
|
|
mutex_lock(&sysfs_lock);
|
|
value = brcm_usb_init_get_dual_select(&priv->ini);
|
|
mutex_unlock(&sysfs_lock);
|
|
return sprintf(buf, "%s\n",
|
|
value_to_name(&brcm_dual_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dual_mode_to_name),
|
|
value));
|
|
}
|
|
static DEVICE_ATTR_RW(dual_select);
|
|
|
|
static struct attribute *brcm_usb_phy_attrs[] = {
|
|
&dev_attr_dr_mode.attr,
|
|
&dev_attr_dual_select.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group brcm_usb_phy_group = {
|
|
.attrs = brcm_usb_phy_attrs,
|
|
};
|
|
|
|
static int brcm_usb_phy_dvr_init(struct device *dev,
|
|
struct brcm_usb_phy_data *priv,
|
|
struct device_node *dn)
|
|
{
|
|
struct phy *gphy;
|
|
int err;
|
|
|
|
priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
|
|
if (IS_ERR(priv->usb_20_clk)) {
|
|
dev_info(dev, "Clock not found in Device Tree\n");
|
|
priv->usb_20_clk = NULL;
|
|
}
|
|
err = clk_prepare_enable(priv->usb_20_clk);
|
|
if (err)
|
|
return err;
|
|
|
|
if (priv->has_eohci) {
|
|
gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
|
|
if (IS_ERR(gphy)) {
|
|
dev_err(dev, "failed to create EHCI/OHCI PHY\n");
|
|
return PTR_ERR(gphy);
|
|
}
|
|
priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
|
|
priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
|
|
phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
|
|
}
|
|
|
|
if (priv->has_xhci) {
|
|
gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
|
|
if (IS_ERR(gphy)) {
|
|
dev_err(dev, "failed to create XHCI PHY\n");
|
|
return PTR_ERR(gphy);
|
|
}
|
|
priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
|
|
priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
|
|
phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
|
|
|
|
priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
|
|
if (IS_ERR(priv->usb_30_clk)) {
|
|
dev_info(dev,
|
|
"USB3.0 clock not found in Device Tree\n");
|
|
priv->usb_30_clk = NULL;
|
|
}
|
|
err = clk_prepare_enable(priv->usb_30_clk);
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct device *dev = &pdev->dev;
|
|
struct brcm_usb_phy_data *priv;
|
|
struct phy_provider *phy_provider;
|
|
struct device_node *dn = pdev->dev.of_node;
|
|
int err;
|
|
const char *mode;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
priv->ini.family_id = brcmstb_get_family_id();
|
|
priv->ini.product_id = brcmstb_get_product_id();
|
|
brcm_usb_set_family_map(&priv->ini);
|
|
dev_dbg(dev, "Best mapping table is for %s\n",
|
|
priv->ini.family_name);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(dev, "can't get USB_CTRL base address\n");
|
|
return -EINVAL;
|
|
}
|
|
priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->ini.ctrl_regs)) {
|
|
dev_err(dev, "can't map CTRL register space\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The XHCI EC registers are optional */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (res) {
|
|
priv->ini.xhci_ec_regs =
|
|
devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->ini.xhci_ec_regs)) {
|
|
dev_err(dev, "can't map XHCI EC register space\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
|
|
of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
|
|
|
|
priv->ini.mode = USB_CTLR_MODE_HOST;
|
|
err = of_property_read_string(dn, "dr_mode", &mode);
|
|
if (err == 0) {
|
|
name_to_value(&brcm_dr_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dr_mode_to_name),
|
|
mode, &priv->ini.mode);
|
|
}
|
|
if (of_property_read_bool(dn, "brcm,has_xhci"))
|
|
priv->has_xhci = true;
|
|
if (of_property_read_bool(dn, "brcm,has_eohci"))
|
|
priv->has_eohci = true;
|
|
|
|
err = brcm_usb_phy_dvr_init(dev, priv, dn);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_init(&priv->mutex);
|
|
|
|
/* make sure invert settings are correct */
|
|
brcm_usb_init_ipp(&priv->ini);
|
|
|
|
/*
|
|
* Create sysfs entries for mode.
|
|
* Remove "dual_select" attribute if not in dual mode
|
|
*/
|
|
if (priv->ini.mode != USB_CTLR_MODE_DRD)
|
|
brcm_usb_phy_attrs[1] = NULL;
|
|
err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
|
|
if (err)
|
|
dev_warn(dev, "Error creating sysfs attributes\n");
|
|
|
|
/* start with everything off */
|
|
if (priv->has_xhci)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
if (priv->has_eohci)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable(priv->usb_20_clk);
|
|
clk_disable(priv->usb_30_clk);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
|
|
if (IS_ERR(phy_provider))
|
|
return PTR_ERR(phy_provider);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int brcm_usb_phy_suspend(struct device *dev)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
if (priv->init_count) {
|
|
clk_disable(priv->usb_20_clk);
|
|
clk_disable(priv->usb_30_clk);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_resume(struct device *dev)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
clk_enable(priv->usb_20_clk);
|
|
clk_enable(priv->usb_30_clk);
|
|
brcm_usb_init_ipp(&priv->ini);
|
|
|
|
/*
|
|
* Initialize anything that was previously initialized.
|
|
* Uninitialize anything that wasn't previously initialized.
|
|
*/
|
|
if (priv->init_count) {
|
|
brcm_usb_init_common(&priv->ini);
|
|
if (priv->phys[BRCM_USB_PHY_2_0].inited) {
|
|
brcm_usb_init_eohci(&priv->ini);
|
|
} else if (priv->has_eohci) {
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
clk_disable(priv->usb_20_clk);
|
|
}
|
|
if (priv->phys[BRCM_USB_PHY_3_0].inited) {
|
|
brcm_usb_init_xhci(&priv->ini);
|
|
} else if (priv->has_xhci) {
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
clk_disable(priv->usb_30_clk);
|
|
}
|
|
} else {
|
|
if (priv->has_xhci)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
if (priv->has_eohci)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable(priv->usb_20_clk);
|
|
clk_disable(priv->usb_30_clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
|
|
};
|
|
|
|
static const struct of_device_id brcm_usb_dt_ids[] = {
|
|
{ .compatible = "brcm,brcmstb-usb-phy" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
|
|
|
|
static struct platform_driver brcm_usb_driver = {
|
|
.probe = brcm_usb_phy_probe,
|
|
.driver = {
|
|
.name = "brcmstb-usb-phy",
|
|
.owner = THIS_MODULE,
|
|
.pm = &brcm_usb_phy_pm_ops,
|
|
.of_match_table = brcm_usb_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(brcm_usb_driver);
|
|
|
|
MODULE_ALIAS("platform:brcmstb-usb-phy");
|
|
MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
|
|
MODULE_DESCRIPTION("BRCM USB PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|