linux/drivers/gpu/drm/i915/intel_dsi_cmd.c
Gaurav K Singh 4510cd779e drm/i915: Dual link needs Shutdown and Turn on packet for both ports
For dual link MIPI panels, SHUTDOWN packet needs to send to both Ports
A & C during MIPI encoder disabling sequence. Similarly, TURN ON packet
to be sent to both Ports during MIPI encoder enabling sequence.

v2: Address review comments by Jani
    - Used a for loop instead of do-while loop.

v3: Used for_each_dsi_port macro instead of for loop

Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05 15:28:26 +01:00

433 lines
12 KiB
C

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Jani Nikula <jani.nikula@intel.com>
*/
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
/*
* XXX: MIPI_DATA_ADDRESS, MIPI_DATA_LENGTH, MIPI_COMMAND_LENGTH, and
* MIPI_COMMAND_ADDRESS registers.
*
* Apparently these registers provide a MIPI adapter level way to send (lots of)
* commands and data to the receiver, without having to write the commands and
* data to MIPI_{HS,LP}_GEN_{CTRL,DATA} registers word by word.
*
* Presumably for anything other than MIPI_DCS_WRITE_MEMORY_START and
* MIPI_DCS_WRITE_MEMORY_CONTINUE (which are used to update the external
* framebuffer in command mode displays) these are just an optimization that can
* come later.
*
* For memory writes, these should probably be used for performance.
*/
static void print_stat(struct intel_dsi *intel_dsi, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
val = I915_READ(MIPI_INTR_STAT(port));
#define STAT_BIT(val, bit) (val) & (bit) ? " " #bit : ""
DRM_DEBUG_KMS("MIPI_INTR_STAT(%c) = %08x"
"%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s"
"\n", port_name(port), val,
STAT_BIT(val, TEARING_EFFECT),
STAT_BIT(val, SPL_PKT_SENT_INTERRUPT),
STAT_BIT(val, GEN_READ_DATA_AVAIL),
STAT_BIT(val, LP_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, HS_GENERIC_WR_FIFO_FULL),
STAT_BIT(val, RX_PROT_VIOLATION),
STAT_BIT(val, RX_INVALID_TX_LENGTH),
STAT_BIT(val, ACK_WITH_NO_ERROR),
STAT_BIT(val, TURN_AROUND_ACK_TIMEOUT),
STAT_BIT(val, LP_RX_TIMEOUT),
STAT_BIT(val, HS_TX_TIMEOUT),
STAT_BIT(val, DPI_FIFO_UNDERRUN),
STAT_BIT(val, LOW_CONTENTION),
STAT_BIT(val, HIGH_CONTENTION),
STAT_BIT(val, TXDSI_VC_ID_INVALID),
STAT_BIT(val, TXDSI_DATA_TYPE_NOT_RECOGNISED),
STAT_BIT(val, TXCHECKSUM_ERROR),
STAT_BIT(val, TXECC_MULTIBIT_ERROR),
STAT_BIT(val, TXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, TXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXDSI_VC_ID_INVALID),
STAT_BIT(val, RXDSI_DATA_TYPE_NOT_REGOGNISED),
STAT_BIT(val, RXCHECKSUM_ERROR),
STAT_BIT(val, RXECC_MULTIBIT_ERROR),
STAT_BIT(val, RXECC_SINGLE_BIT_ERROR),
STAT_BIT(val, RXFALSE_CONTROL_ERROR),
STAT_BIT(val, RXHS_RECEIVE_TIMEOUT_ERROR),
STAT_BIT(val, RX_LP_TX_SYNC_ERROR),
STAT_BIT(val, RXEXCAPE_MODE_ENTRY_ERROR),
STAT_BIT(val, RXEOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_SYNC_ERROR),
STAT_BIT(val, RXSOT_ERROR));
#undef STAT_BIT
}
enum dsi_type {
DSI_DCS,
DSI_GENERIC,
};
/* enable or disable command mode hs transmissions */
void dsi_hs_mode_enable(struct intel_dsi *intel_dsi, bool enable,
enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 temp;
u32 mask = DBI_FIFO_EMPTY;
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(port)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for DBI FIFO empty\n");
temp = I915_READ(MIPI_HS_LP_DBI_ENABLE(port));
temp &= DBI_HS_LP_MODE_MASK;
I915_WRITE(MIPI_HS_LP_DBI_ENABLE(port), enable ? DBI_HS_MODE : DBI_LP_MODE);
intel_dsi->hs = enable;
}
static int dsi_vc_send_short(struct intel_dsi *intel_dsi, int channel,
u8 data_type, u16 data, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 ctrl_reg;
u32 ctrl;
u32 mask;
DRM_DEBUG_KMS("channel %d, data_type %d, data %04x\n",
channel, data_type, data);
if (intel_dsi->hs) {
ctrl_reg = MIPI_HS_GEN_CTRL(port);
mask = HS_CTRL_FIFO_FULL;
} else {
ctrl_reg = MIPI_LP_GEN_CTRL(port);
mask = LP_CTRL_FIFO_FULL;
}
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(port)) & mask) == 0, 50)) {
DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n");
print_stat(intel_dsi, port);
}
/*
* Note: This function is also used for long packets, with length passed
* as data, since SHORT_PACKET_PARAM_SHIFT ==
* LONG_PACKET_WORD_COUNT_SHIFT.
*/
ctrl = data << SHORT_PACKET_PARAM_SHIFT |
channel << VIRTUAL_CHANNEL_SHIFT |
data_type << DATA_TYPE_SHIFT;
I915_WRITE(ctrl_reg, ctrl);
return 0;
}
static int dsi_vc_send_long(struct intel_dsi *intel_dsi, int channel,
u8 data_type, const u8 *data, int len, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 data_reg;
int i, j, n;
u32 mask;
DRM_DEBUG_KMS("channel %d, data_type %d, len %04x\n",
channel, data_type, len);
if (intel_dsi->hs) {
data_reg = MIPI_HS_GEN_DATA(port);
mask = HS_DATA_FIFO_FULL;
} else {
data_reg = MIPI_LP_GEN_DATA(port);
mask = LP_DATA_FIFO_FULL;
}
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(port)) & mask) == 0, 50))
DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n");
for (i = 0; i < len; i += n) {
u32 val = 0;
n = min_t(int, len - i, 4);
for (j = 0; j < n; j++)
val |= *data++ << 8 * j;
I915_WRITE(data_reg, val);
/* XXX: check for data fifo full, once that is set, write 4
* dwords, then wait for not set, then continue. */
}
return dsi_vc_send_short(intel_dsi, channel, data_type, len, port);
}
static int dsi_vc_write_common(struct intel_dsi *intel_dsi,
int channel, const u8 *data, int len,
enum dsi_type type, enum port port)
{
int ret;
if (len == 0) {
BUG_ON(type == DSI_GENERIC);
ret = dsi_vc_send_short(intel_dsi, channel,
MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM,
0, port);
} else if (len == 1) {
ret = dsi_vc_send_short(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM :
MIPI_DSI_DCS_SHORT_WRITE, data[0],
port);
} else if (len == 2) {
ret = dsi_vc_send_short(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM :
MIPI_DSI_DCS_SHORT_WRITE_PARAM,
(data[1] << 8) | data[0], port);
} else {
ret = dsi_vc_send_long(intel_dsi, channel,
type == DSI_GENERIC ?
MIPI_DSI_GENERIC_LONG_WRITE :
MIPI_DSI_DCS_LONG_WRITE, data, len,
port);
}
return ret;
}
int dsi_vc_dcs_write(struct intel_dsi *intel_dsi, int channel,
const u8 *data, int len, enum port port)
{
return dsi_vc_write_common(intel_dsi, channel, data, len, DSI_DCS,
port);
}
int dsi_vc_generic_write(struct intel_dsi *intel_dsi, int channel,
const u8 *data, int len, enum port port)
{
return dsi_vc_write_common(intel_dsi, channel, data, len, DSI_GENERIC,
port);
}
static int dsi_vc_dcs_send_read_request(struct intel_dsi *intel_dsi,
int channel, u8 dcs_cmd, enum port port)
{
return dsi_vc_send_short(intel_dsi, channel, MIPI_DSI_DCS_READ,
dcs_cmd, port);
}
static int dsi_vc_generic_send_read_request(struct intel_dsi *intel_dsi,
int channel, u8 *reqdata,
int reqlen, enum port port)
{
u16 data;
u8 data_type;
switch (reqlen) {
case 0:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
data = 0;
break;
case 1:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
data = reqdata[0];
break;
case 2:
data_type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
data = (reqdata[1] << 8) | reqdata[0];
break;
default:
BUG();
}
return dsi_vc_send_short(intel_dsi, channel, data_type, data, port);
}
static int dsi_read_data_return(struct intel_dsi *intel_dsi,
u8 *buf, int buflen, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int i, len = 0;
u32 data_reg, val;
if (intel_dsi->hs) {
data_reg = MIPI_HS_GEN_DATA(port);
} else {
data_reg = MIPI_LP_GEN_DATA(port);
}
while (len < buflen) {
val = I915_READ(data_reg);
for (i = 0; i < 4 && len < buflen; i++, len++)
buf[len] = val >> 8 * i;
}
return len;
}
int dsi_vc_dcs_read(struct intel_dsi *intel_dsi, int channel, u8 dcs_cmd,
u8 *buf, int buflen, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 mask;
int ret;
/*
* XXX: should issue multiple read requests and reads if request is
* longer than MIPI_MAX_RETURN_PKT_SIZE
*/
I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL);
ret = dsi_vc_dcs_send_read_request(intel_dsi, channel, dcs_cmd, port);
if (ret)
return ret;
mask = GEN_READ_DATA_AVAIL;
if (wait_for((I915_READ(MIPI_INTR_STAT(port)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for read data.\n");
ret = dsi_read_data_return(intel_dsi, buf, buflen, port);
if (ret < 0)
return ret;
if (ret != buflen)
return -EIO;
return 0;
}
int dsi_vc_generic_read(struct intel_dsi *intel_dsi, int channel,
u8 *reqdata, int reqlen, u8 *buf, int buflen, enum port port)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 mask;
int ret;
/*
* XXX: should issue multiple read requests and reads if request is
* longer than MIPI_MAX_RETURN_PKT_SIZE
*/
I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL);
ret = dsi_vc_generic_send_read_request(intel_dsi, channel, reqdata,
reqlen, port);
if (ret)
return ret;
mask = GEN_READ_DATA_AVAIL;
if (wait_for((I915_READ(MIPI_INTR_STAT(port)) & mask) == mask, 50))
DRM_ERROR("Timeout waiting for read data.\n");
ret = dsi_read_data_return(intel_dsi, buf, buflen, port);
if (ret < 0)
return ret;
if (ret != buflen)
return -EIO;
return 0;
}
/*
* send a video mode command
*
* XXX: commands with data in MIPI_DPI_DATA?
*/
int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port;
u32 mask;
/* XXX: pipe, hs */
if (hs)
cmd &= ~DPI_LP_MODE;
else
cmd |= DPI_LP_MODE;
for_each_dsi_port(port, intel_dsi->ports) {
/* clear bit */
I915_WRITE(MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT);
/* XXX: old code skips write if control unchanged */
if (cmd == I915_READ(MIPI_DPI_CONTROL(port)))
DRM_ERROR("Same special packet %02x twice in a row.\n",
cmd);
I915_WRITE(MIPI_DPI_CONTROL(port), cmd);
mask = SPL_PKT_SENT_INTERRUPT;
if (wait_for((I915_READ(MIPI_INTR_STAT(port)) & mask) == mask,
100))
DRM_ERROR("Video mode command 0x%08x send failed.\n",
cmd);
}
return 0;
}
void wait_for_dsi_fifo_empty(struct intel_dsi *intel_dsi)
{
struct drm_encoder *encoder = &intel_dsi->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
enum port port = intel_dsi_pipe_to_port(intel_crtc->pipe);
u32 mask;
mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY |
LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY;
if (wait_for((I915_READ(MIPI_GEN_FIFO_STAT(port)) & mask) == mask, 100))
DRM_ERROR("DPI FIFOs are not empty\n");
}