Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-14 23:25:54 +00:00
Code Issues Packages Projects Releases Wiki Activity
ebef8abc96
linux/drivers/mfd/atc260x-core.c
Cristian Ciocaltea f7cb7fe34d mfd: Add MFD driver for ATC260x PMICs 
Add initial support for the Actions Semi ATC260x PMICs which integrates
Audio Codec, Power management, Clock generation and GPIO controller
blocks.

For the moment this driver only supports Regulator, Poweroff and Onkey
functionalities for the ATC2603C and ATC2609A chip variants.

Since the PMICs can be accessed using both I2C and SPI buses, the
following driver structure has been adopted:

           -----> atc260x-core.c (Implements core functionalities)
          /
ATC260x --------> atc260x-i2c.c (Implements I2C interface)
          \
           -----> atc260x-spi.c (Implements SPI interface - TODO)

Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10 11:10:23 +00:00

311 lines
9.1 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Core support for ATC260x PMICs
*
* Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
*/
#include <linux/interrupt.h>
#include <linux/mfd/atc260x/core.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#define ATC260X_CHIP_REV_MAX 31
struct atc260x_init_regs {
unsigned int cmu_devrst;
unsigned int cmu_devrst_ints;
unsigned int ints_msk;
unsigned int pad_en;
unsigned int pad_en_extirq;
};
static void regmap_lock_mutex(void *__mutex)
{
struct mutex *mutex = __mutex;
/*
* Using regmap within an atomic context (e.g. accessing a PMIC when
* powering system down) is normally allowed only if the regmap type
* is MMIO and the regcache type is either REGCACHE_NONE or
* REGCACHE_FLAT. For slow buses like I2C and SPI, the regmap is
* internally protected by a mutex which is acquired non-atomically.
*
* Let's improve this by using a customized locking scheme inspired
* from I2C atomic transfer. See i2c_in_atomic_xfer_mode() for a
* starting point.
*/
if (system_state > SYSTEM_RUNNING && irqs_disabled())
mutex_trylock(mutex);
else
mutex_lock(mutex);
}
static void regmap_unlock_mutex(void *__mutex)
{
struct mutex *mutex = __mutex;
mutex_unlock(mutex);
}
static const struct regmap_config atc2603c_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
.max_register = ATC2603C_SADDR,
.cache_type = REGCACHE_NONE,
};
static const struct regmap_config atc2609a_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
.max_register = ATC2609A_SADDR,
.cache_type = REGCACHE_NONE,
};
static const struct regmap_irq atc2603c_regmap_irqs[] = {
REGMAP_IRQ_REG(ATC2603C_IRQ_AUDIO, 0, ATC2603C_INTS_MSK_AUDIO),
REGMAP_IRQ_REG(ATC2603C_IRQ_OV, 0, ATC2603C_INTS_MSK_OV),
REGMAP_IRQ_REG(ATC2603C_IRQ_OC, 0, ATC2603C_INTS_MSK_OC),
REGMAP_IRQ_REG(ATC2603C_IRQ_OT, 0, ATC2603C_INTS_MSK_OT),
REGMAP_IRQ_REG(ATC2603C_IRQ_UV, 0, ATC2603C_INTS_MSK_UV),
REGMAP_IRQ_REG(ATC2603C_IRQ_ALARM, 0, ATC2603C_INTS_MSK_ALARM),
REGMAP_IRQ_REG(ATC2603C_IRQ_ONOFF, 0, ATC2603C_INTS_MSK_ONOFF),
REGMAP_IRQ_REG(ATC2603C_IRQ_SGPIO, 0, ATC2603C_INTS_MSK_SGPIO),
REGMAP_IRQ_REG(ATC2603C_IRQ_IR, 0, ATC2603C_INTS_MSK_IR),
REGMAP_IRQ_REG(ATC2603C_IRQ_REMCON, 0, ATC2603C_INTS_MSK_REMCON),
REGMAP_IRQ_REG(ATC2603C_IRQ_POWER_IN, 0, ATC2603C_INTS_MSK_POWERIN),
};
static const struct regmap_irq atc2609a_regmap_irqs[] = {
REGMAP_IRQ_REG(ATC2609A_IRQ_AUDIO, 0, ATC2609A_INTS_MSK_AUDIO),
REGMAP_IRQ_REG(ATC2609A_IRQ_OV, 0, ATC2609A_INTS_MSK_OV),
REGMAP_IRQ_REG(ATC2609A_IRQ_OC, 0, ATC2609A_INTS_MSK_OC),
REGMAP_IRQ_REG(ATC2609A_IRQ_OT, 0, ATC2609A_INTS_MSK_OT),
REGMAP_IRQ_REG(ATC2609A_IRQ_UV, 0, ATC2609A_INTS_MSK_UV),
REGMAP_IRQ_REG(ATC2609A_IRQ_ALARM, 0, ATC2609A_INTS_MSK_ALARM),
REGMAP_IRQ_REG(ATC2609A_IRQ_ONOFF, 0, ATC2609A_INTS_MSK_ONOFF),
REGMAP_IRQ_REG(ATC2609A_IRQ_WKUP, 0, ATC2609A_INTS_MSK_WKUP),
REGMAP_IRQ_REG(ATC2609A_IRQ_IR, 0, ATC2609A_INTS_MSK_IR),
REGMAP_IRQ_REG(ATC2609A_IRQ_REMCON, 0, ATC2609A_INTS_MSK_REMCON),
REGMAP_IRQ_REG(ATC2609A_IRQ_POWER_IN, 0, ATC2609A_INTS_MSK_POWERIN),
};
static const struct regmap_irq_chip atc2603c_regmap_irq_chip = {
.name = "atc2603c",
.irqs = atc2603c_regmap_irqs,
.num_irqs = ARRAY_SIZE(atc2603c_regmap_irqs),
.num_regs = 1,
.status_base = ATC2603C_INTS_PD,
.mask_base = ATC2603C_INTS_MSK,
.mask_invert = true,
};
static const struct regmap_irq_chip atc2609a_regmap_irq_chip = {
.name = "atc2609a",
.irqs = atc2609a_regmap_irqs,
.num_irqs = ARRAY_SIZE(atc2609a_regmap_irqs),
.num_regs = 1,
.status_base = ATC2609A_INTS_PD,
.mask_base = ATC2609A_INTS_MSK,
.mask_invert = true,
};
static const struct resource atc2603c_onkey_resources[] = {
DEFINE_RES_IRQ(ATC2603C_IRQ_ONOFF),
};
static const struct resource atc2609a_onkey_resources[] = {
DEFINE_RES_IRQ(ATC2609A_IRQ_ONOFF),
};
static const struct mfd_cell atc2603c_mfd_cells[] = {
{ .name = "atc260x-regulator" },
{ .name = "atc260x-pwrc" },
{
.name = "atc260x-onkey",
.num_resources = ARRAY_SIZE(atc2603c_onkey_resources),
.resources = atc2603c_onkey_resources,
},
};
static const struct mfd_cell atc2609a_mfd_cells[] = {
{ .name = "atc260x-regulator" },
{ .name = "atc260x-pwrc" },
{
.name = "atc260x-onkey",
.num_resources = ARRAY_SIZE(atc2609a_onkey_resources),
.resources = atc2609a_onkey_resources,
},
};
static const struct atc260x_init_regs atc2603c_init_regs = {
.cmu_devrst = ATC2603C_CMU_DEVRST,
.cmu_devrst_ints = ATC2603C_CMU_DEVRST_INTS,
.ints_msk = ATC2603C_INTS_MSK,
.pad_en = ATC2603C_PAD_EN,
.pad_en_extirq = ATC2603C_PAD_EN_EXTIRQ,
};
static const struct atc260x_init_regs atc2609a_init_regs = {
.cmu_devrst = ATC2609A_CMU_DEVRST,
.cmu_devrst_ints = ATC2609A_CMU_DEVRST_INTS,
.ints_msk = ATC2609A_INTS_MSK,
.pad_en = ATC2609A_PAD_EN,
.pad_en_extirq = ATC2609A_PAD_EN_EXTIRQ,
};
static void atc260x_cmu_reset(struct atc260x *atc260x)
{
const struct atc260x_init_regs *regs = atc260x->init_regs;
/* Assert reset */
regmap_update_bits(atc260x->regmap, regs->cmu_devrst,
regs->cmu_devrst_ints, ~regs->cmu_devrst_ints);
/* De-assert reset */
regmap_update_bits(atc260x->regmap, regs->cmu_devrst,
regs->cmu_devrst_ints, regs->cmu_devrst_ints);
}
static void atc260x_dev_init(struct atc260x *atc260x)
{
const struct atc260x_init_regs *regs = atc260x->init_regs;
/* Initialize interrupt block */
atc260x_cmu_reset(atc260x);
/* Disable all interrupt sources */
regmap_write(atc260x->regmap, regs->ints_msk, 0);
/* Enable EXTIRQ pad */
regmap_update_bits(atc260x->regmap, regs->pad_en,
regs->pad_en_extirq, regs->pad_en_extirq);
}
/**
* atc260x_match_device(): Setup ATC260x variant related fields
*
* @atc260x: ATC260x device to setup (.dev field must be set)
* @regmap_cfg: regmap config associated with this ATC260x device
*
* This lets the ATC260x core configure the MFD cells and register maps
* for later use.
*/
int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg)
{
struct device *dev = atc260x->dev;
const void *of_data;
of_data = of_device_get_match_data(dev);
if (!of_data)
return -ENODEV;
atc260x->ic_type = (unsigned long)of_data;
switch (atc260x->ic_type) {
case ATC2603C:
*regmap_cfg = atc2603c_regmap_config;
atc260x->regmap_irq_chip = &atc2603c_regmap_irq_chip;
atc260x->cells = atc2603c_mfd_cells;
atc260x->nr_cells = ARRAY_SIZE(atc2603c_mfd_cells);
atc260x->type_name = "atc2603c";
atc260x->rev_reg = ATC2603C_CHIP_VER;
atc260x->init_regs = &atc2603c_init_regs;
break;
case ATC2609A:
*regmap_cfg = atc2609a_regmap_config;
atc260x->regmap_irq_chip = &atc2609a_regmap_irq_chip;
atc260x->cells = atc2609a_mfd_cells;
atc260x->nr_cells = ARRAY_SIZE(atc2609a_mfd_cells);
atc260x->type_name = "atc2609a";
atc260x->rev_reg = ATC2609A_CHIP_VER;
atc260x->init_regs = &atc2609a_init_regs;
break;
default:
dev_err(dev, "Unsupported ATC260x device type: %u\n",
atc260x->ic_type);
return -EINVAL;
}
atc260x->regmap_mutex = devm_kzalloc(dev, sizeof(*atc260x->regmap_mutex),
GFP_KERNEL);
if (!atc260x->regmap_mutex)
return -ENOMEM;
mutex_init(atc260x->regmap_mutex);
regmap_cfg->lock = regmap_lock_mutex,
regmap_cfg->unlock = regmap_unlock_mutex,
regmap_cfg->lock_arg = atc260x->regmap_mutex;
return 0;
}
EXPORT_SYMBOL_GPL(atc260x_match_device);
/**
* atc260x_device_probe(): Probe a configured ATC260x device
*
* @atc260x: ATC260x device to probe (must be configured)
*
* This function lets the ATC260x core register the ATC260x MFD devices
* and IRQCHIP. The ATC260x device passed in must be fully configured
* with atc260x_match_device, its IRQ set, and regmap created.
*/
int atc260x_device_probe(struct atc260x *atc260x)
{
struct device *dev = atc260x->dev;
unsigned int chip_rev;
int ret;
if (!atc260x->irq) {
dev_err(dev, "No interrupt support\n");
return -EINVAL;
}
/* Initialize the hardware */
atc260x_dev_init(atc260x);
ret = regmap_read(atc260x->regmap, atc260x->rev_reg, &chip_rev);
if (ret) {
dev_err(dev, "Failed to get chip revision\n");
return ret;
}
if (chip_rev > ATC260X_CHIP_REV_MAX) {
dev_err(dev, "Unknown chip revision: %u\n", chip_rev);
return -EINVAL;
}
atc260x->ic_ver = __ffs(chip_rev + 1U);
dev_info(dev, "Detected chip type %s rev.%c\n",
atc260x->type_name, 'A' + atc260x->ic_ver);
ret = devm_regmap_add_irq_chip(dev, atc260x->regmap, atc260x->irq, IRQF_ONESHOT,
-1, atc260x->regmap_irq_chip, &atc260x->irq_data);
if (ret) {
dev_err(dev, "Failed to add IRQ chip: %d\n", ret);
return ret;
}
ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
atc260x->cells, atc260x->nr_cells, NULL, 0,
regmap_irq_get_domain(atc260x->irq_data));
if (ret) {
dev_err(dev, "Failed to add child devices: %d\n", ret);
regmap_del_irq_chip(atc260x->irq, atc260x->irq_data);
}
return ret;
}
EXPORT_SYMBOL_GPL(atc260x_device_probe);
MODULE_DESCRIPTION("ATC260x PMICs Core support");
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink