Marco Felsch eb0bbba763 ARM: dts: imx6: phycore-som: fix emmc supply ... Currently the vmmc is supplied by the 1.8V pmic rail but this is wrong. The default module behaviour is to power VCCQ and VCC by the 3.3V power rail. Optional the user can connect the VCCQ to the pmic 1.8V emmc power rail using a solder jumper. Fixes: ddec5d1c00 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>		2020-02-13 20:57:11 +08:00
..
boot	ARM: dts: imx6: phycore-som: fix emmc supply	2020-02-13 20:57:11 +08:00
common	ARM: scoop: Use the right include	2019-09-03 22:09:46 +02:00
configs	ARM: SoC defconfig updates	2020-02-08 14:15:41 -08:00
crypto	crypto: arm/chacha - fix build failured when kernel mode NEON is disabled	2020-01-22 16:21:11 +08:00
include	A set of fixes for the interrupt subsystem:	2020-02-09 11:56:41 -08:00
kernel	ARM development updates for 5.6-rc1:	2020-02-04 13:12:19 +00:00
kvm	KVM: Drop kvm_arch_vcpu_setup()	2020-01-27 19:59:28 +01:00
lib	Merge branch 'misc' into fixes	2019-10-22 17:37:29 +01:00
mach-actions
mach-alpine
mach-artpec
mach-asm9260
mach-aspeed	ARM: SoC fixes	2019-09-30 10:04:28 -07:00
mach-at91	ARM: at91: pm: use of_device_id array to find the proper shdwc node	2020-01-10 23:40:31 +01:00
mach-axxia
mach-bcm	ARM: SoC platform updates	2020-02-08 13:55:25 -08:00
mach-berlin
mach-clps711x
mach-cns3xxx
mach-davinci	ARM: SoC: late updates	2020-02-08 14:17:27 -08:00
mach-digicolor
mach-dove	ARM: orion/mvebu: unify debug-ll virtual addresses	2019-08-14 19:24:58 +02:00
mach-ebsa110
mach-efm32
mach-ep93xx	Merge branch 'spi-5.4' into spi-next	2019-09-15 10:32:06 +01:00
mach-exynos	ARM: SoC platform updates	2020-02-08 13:55:25 -08:00
mach-footbridge	ARM: 8911/1: move pcibios_report_status to <asm/pci.h>	2019-10-27 21:14:40 +00:00
mach-gemini
mach-highbank
mach-hisi	ARM: hisi: drop useless depend on ARCH_MULTI_V7	2019-10-26 15:31:22 +08:00
mach-imx	ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A	2020-01-09 18:48:35 +08:00
mach-integrator
mach-iop32x	ARM: iop32x: merge everything into mach-iop32x/	2019-08-14 15:36:22 +02:00
mach-ixp4xx	ARM/net: ixp4xx: Pass ethernet physical base as resource	2020-01-12 12:59:53 -08:00
mach-keystone
mach-lpc18xx
mach-lpc32xx	ARM: lpc32xx: allow multiplatform build	2019-08-15 21:34:08 +02:00
mach-mediatek
mach-meson
mach-milbeaut
mach-mmp	ARM: mmp: do not divide the clock rate	2020-01-06 09:18:50 -08:00
mach-moxart
mach-mv78xx0	ARM: orion/mvebu: unify debug-ll virtual addresses	2019-08-14 19:24:58 +02:00
mach-mvebu
mach-mxs
mach-nomadik
mach-npcm
mach-nspire	ARM: mach-nspire: Kill off CLCD auxdata	2019-08-13 15:48:23 +02:00
mach-omap1	ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1	2019-11-11 12:30:39 -08:00
mach-omap2	ARM: SoC: late updates	2020-02-08 14:17:27 -08:00
mach-orion5x	ARM: orion/mvebu: unify debug-ll virtual addresses	2019-08-14 19:24:58 +02:00
mach-oxnas
mach-picoxcell
mach-prima2
mach-pxa	USB/Thunderbolt/PHY driver updates for 5.6-rc1	2020-01-29 10:09:44 -08:00
mach-qcom
mach-rda
mach-realview
mach-rockchip
mach-rpc	ARM: riscpc: Mark expected switch fall-through	2019-08-20 19:42:48 -05:00
mach-s3c24xx	ARM: s3c24xx: Switch to atomic pwm API in rx1950	2020-01-21 20:56:47 +01:00
mach-s3c64xx	ARM: SoC platform updates	2020-02-08 13:55:25 -08:00
mach-s5pv210
mach-sa1100
mach-shmobile	remove ioremap_nocache and devm_ioremap_nocache	2020-01-06 09:45:59 +01:00
mach-socfpga	arm: socfpga: execute cold reboot by default	2019-11-22 12:12:10 -06:00
mach-spear
mach-sti
mach-stm32
mach-sunxi	ARM: sunxi: Fix CPU powerdown on A83T	2019-10-29 09:09:56 +01:00
mach-tango
mach-tegra	ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume	2020-01-08 12:58:46 +01:00
mach-u300	pinctrl: Allow modules to use pinctrl_[un]register_mappings	2019-12-30 14:27:17 +01:00
mach-uniphier
mach-ux500	mfd: db8500-prcmu: Support U8420-sysclk firmware	2019-11-11 08:45:04 +00:00
mach-versatile
mach-vexpress	ARM: vexpress: Set-up shared OPP table instead of individual for each CPU	2019-12-09 11:52:50 +00:00
mach-vt8500
mach-zx
mach-zynq	ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start	2020-01-08 15:21:09 +01:00
mm	ARM development updates for 5.6-rc1:	2020-02-04 13:12:19 +00:00
net	ARM: net: bpf: Improve prologue code sequence	2019-12-11 14:34:26 +01:00
nwfpe
oprofile
plat-omap	dmaengine: ti: omap-dma: Configure global priority register directly	2019-12-30 09:45:25 -08:00
plat-orion
plat-pxa	spi: pxa2xx: No need to keep pointer to platform device	2019-10-18 18:24:50 +01:00
plat-samsung	ARM: samsung: Rename Samsung and Exynos to lowercase	2020-01-07 20:44:22 +01:00
plat-versatile
probes
tools	threads-v5.6	2020-01-29 19:38:34 -08:00
vdso	kbuild: rename hostprogs-y/always to hostprogs/always-y	2020-02-04 01:53:07 +09:00
vfp
xen	dma-mapping updates for 5.5-rc1	2019-11-28 11:16:43 -08:00
Kconfig	ARM development updates for 5.6-rc1:	2020-02-04 13:12:19 +00:00
Kconfig-nommu
Kconfig.debug	ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60	2019-12-10 00:45:30 +01:00
Makefile	ARM updates for 5.4-rc1:	2019-09-22 09:39:09 -07:00