linux/drivers/pinctrl/pinctrl-rza1.c
Geert Uytterhoeven ea4083165f pinctrl: rza1: Remove unneeded wrong check for wrong variable
Depending on compiler version:

    drivers/pinctrl/pinctrl-rza1.c: In function ‘rza1_pinctrl_probe’:
    drivers/pinctrl/pinctrl-rza1.c:1260:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
      if (ret)
	 ^

Indeed, the result returned by platform_get_resource() was stored in
"res", not "ret".  In addition, the correct error check would be
"if (!res)", as platform_get_resource() does not return an error code,
but returns NULL on failure.

However, as devm_ioremap_resource() verifies the validity of the passed
resource pointer anyway, the check can just be removed.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5a49b644b3 ("pinctrl: Renesas RZ/A1 pin and gpio controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-30 15:46:38 +02:00

1309 lines
33 KiB
C

/*
* Combined GPIO and pin controller support for Renesas RZ/A1 (r7s72100) SoC
*
* Copyright (C) 2017 Jacopo Mondi
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* This pin controller/gpio combined driver supports Renesas devices of RZ/A1
* family.
* This includes SoCs which are sub- or super- sets of this particular line,
* as RZ/A1H (r7s721000), RZ/A1M (r7s721010) and RZ/A1L (r7s721020).
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/slab.h>
#include "core.h"
#include "devicetree.h"
#include "pinconf.h"
#include "pinmux.h"
#define DRIVER_NAME "pinctrl-rza1"
#define RZA1_P_REG 0x0000
#define RZA1_PPR_REG 0x0200
#define RZA1_PM_REG 0x0300
#define RZA1_PMC_REG 0x0400
#define RZA1_PFC_REG 0x0500
#define RZA1_PFCE_REG 0x0600
#define RZA1_PFCEA_REG 0x0a00
#define RZA1_PIBC_REG 0x4000
#define RZA1_PBDC_REG 0x4100
#define RZA1_PIPC_REG 0x4200
#define RZA1_ADDR(mem, reg, port) ((mem) + (reg) + ((port) * 4))
#define RZA1_NPORTS 12
#define RZA1_PINS_PER_PORT 16
#define RZA1_NPINS (RZA1_PINS_PER_PORT * RZA1_NPORTS)
#define RZA1_PIN_ID_TO_PORT(id) ((id) / RZA1_PINS_PER_PORT)
#define RZA1_PIN_ID_TO_PIN(id) ((id) % RZA1_PINS_PER_PORT)
/*
* Use 16 lower bits [15:0] for pin identifier
* Use 16 higher bits [31:16] for pin mux function
*/
#define MUX_PIN_ID_MASK GENMASK(15, 0)
#define MUX_FUNC_MASK GENMASK(31, 16)
#define MUX_FUNC_OFFS 16
#define MUX_FUNC(pinconf) \
((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
#define MUX_FUNC_PFC_MASK BIT(0)
#define MUX_FUNC_PFCE_MASK BIT(1)
#define MUX_FUNC_PFCEA_MASK BIT(2)
/* Pin mux flags */
#define MUX_FLAGS_BIDIR BIT(0)
#define MUX_FLAGS_SWIO_INPUT BIT(1)
#define MUX_FLAGS_SWIO_OUTPUT BIT(2)
/* ----------------------------------------------------------------------------
* RZ/A1 pinmux flags
*/
/**
* rza1_bidir_pin - describe a single pin that needs bidir flag applied.
*/
struct rza1_bidir_pin {
u8 pin: 4;
u8 func: 4;
};
/**
* rza1_bidir_entry - describe a list of pins that needs bidir flag applied.
* Each struct rza1_bidir_entry describes a port.
*/
struct rza1_bidir_entry {
const unsigned int npins;
const struct rza1_bidir_pin *pins;
};
/**
* rza1_swio_pin - describe a single pin that needs bidir flag applied.
*/
struct rza1_swio_pin {
u16 pin: 4;
u16 port: 4;
u16 func: 4;
u16 input: 1;
};
/**
* rza1_swio_entry - describe a list of pins that needs swio flag applied
*/
struct rza1_swio_entry {
const unsigned int npins;
const struct rza1_swio_pin *pins;
};
/**
* rza1_pinmux_conf - group together bidir and swio pinmux flag tables
*/
struct rza1_pinmux_conf {
const struct rza1_bidir_entry *bidir_entries;
const struct rza1_swio_entry *swio_entries;
};
/* ----------------------------------------------------------------------------
* RZ/A1H (r7s72100) pinmux flags
*/
static const struct rza1_bidir_pin rza1h_bidir_pins_p1[] = {
{ .pin = 0, .func = 1 },
{ .pin = 1, .func = 1 },
{ .pin = 2, .func = 1 },
{ .pin = 3, .func = 1 },
{ .pin = 4, .func = 1 },
{ .pin = 5, .func = 1 },
{ .pin = 6, .func = 1 },
{ .pin = 7, .func = 1 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p2[] = {
{ .pin = 0, .func = 1 },
{ .pin = 1, .func = 1 },
{ .pin = 2, .func = 1 },
{ .pin = 3, .func = 1 },
{ .pin = 4, .func = 1 },
{ .pin = 0, .func = 4 },
{ .pin = 1, .func = 4 },
{ .pin = 2, .func = 4 },
{ .pin = 3, .func = 4 },
{ .pin = 5, .func = 1 },
{ .pin = 6, .func = 1 },
{ .pin = 7, .func = 1 },
{ .pin = 8, .func = 1 },
{ .pin = 9, .func = 1 },
{ .pin = 10, .func = 1 },
{ .pin = 11, .func = 1 },
{ .pin = 12, .func = 1 },
{ .pin = 13, .func = 1 },
{ .pin = 14, .func = 1 },
{ .pin = 15, .func = 1 },
{ .pin = 12, .func = 4 },
{ .pin = 13, .func = 4 },
{ .pin = 14, .func = 4 },
{ .pin = 15, .func = 4 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p3[] = {
{ .pin = 3, .func = 2 },
{ .pin = 10, .func = 7 },
{ .pin = 11, .func = 7 },
{ .pin = 13, .func = 7 },
{ .pin = 14, .func = 7 },
{ .pin = 15, .func = 7 },
{ .pin = 10, .func = 8 },
{ .pin = 11, .func = 8 },
{ .pin = 13, .func = 8 },
{ .pin = 14, .func = 8 },
{ .pin = 15, .func = 8 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p4[] = {
{ .pin = 0, .func = 8 },
{ .pin = 1, .func = 8 },
{ .pin = 2, .func = 8 },
{ .pin = 3, .func = 8 },
{ .pin = 10, .func = 3 },
{ .pin = 11, .func = 3 },
{ .pin = 13, .func = 3 },
{ .pin = 14, .func = 3 },
{ .pin = 15, .func = 3 },
{ .pin = 10, .func = 4 },
{ .pin = 11, .func = 4 },
{ .pin = 13, .func = 4 },
{ .pin = 14, .func = 4 },
{ .pin = 15, .func = 4 },
{ .pin = 12, .func = 5 },
{ .pin = 13, .func = 5 },
{ .pin = 14, .func = 5 },
{ .pin = 15, .func = 5 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p6[] = {
{ .pin = 0, .func = 1 },
{ .pin = 1, .func = 1 },
{ .pin = 2, .func = 1 },
{ .pin = 3, .func = 1 },
{ .pin = 4, .func = 1 },
{ .pin = 5, .func = 1 },
{ .pin = 6, .func = 1 },
{ .pin = 7, .func = 1 },
{ .pin = 8, .func = 1 },
{ .pin = 9, .func = 1 },
{ .pin = 10, .func = 1 },
{ .pin = 11, .func = 1 },
{ .pin = 12, .func = 1 },
{ .pin = 13, .func = 1 },
{ .pin = 14, .func = 1 },
{ .pin = 15, .func = 1 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p7[] = {
{ .pin = 13, .func = 3 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p8[] = {
{ .pin = 8, .func = 3 },
{ .pin = 9, .func = 3 },
{ .pin = 10, .func = 3 },
{ .pin = 11, .func = 3 },
{ .pin = 14, .func = 2 },
{ .pin = 15, .func = 2 },
{ .pin = 14, .func = 3 },
{ .pin = 15, .func = 3 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p9[] = {
{ .pin = 0, .func = 2 },
{ .pin = 1, .func = 2 },
{ .pin = 4, .func = 2 },
{ .pin = 5, .func = 2 },
{ .pin = 6, .func = 2 },
{ .pin = 7, .func = 2 },
};
static const struct rza1_bidir_pin rza1h_bidir_pins_p11[] = {
{ .pin = 6, .func = 2 },
{ .pin = 7, .func = 2 },
{ .pin = 9, .func = 2 },
{ .pin = 6, .func = 4 },
{ .pin = 7, .func = 4 },
{ .pin = 9, .func = 4 },
{ .pin = 10, .func = 2 },
{ .pin = 11, .func = 2 },
{ .pin = 10, .func = 4 },
{ .pin = 11, .func = 4 },
{ .pin = 12, .func = 4 },
{ .pin = 13, .func = 4 },
{ .pin = 14, .func = 4 },
{ .pin = 15, .func = 4 },
};
static const struct rza1_swio_pin rza1h_swio_pins[] = {
{ .port = 2, .pin = 7, .func = 4, .input = 0 },
{ .port = 2, .pin = 11, .func = 4, .input = 0 },
{ .port = 3, .pin = 7, .func = 3, .input = 0 },
{ .port = 3, .pin = 7, .func = 8, .input = 0 },
{ .port = 4, .pin = 7, .func = 5, .input = 0 },
{ .port = 4, .pin = 7, .func = 11, .input = 0 },
{ .port = 4, .pin = 15, .func = 6, .input = 0 },
{ .port = 5, .pin = 0, .func = 1, .input = 1 },
{ .port = 5, .pin = 1, .func = 1, .input = 1 },
{ .port = 5, .pin = 2, .func = 1, .input = 1 },
{ .port = 5, .pin = 3, .func = 1, .input = 1 },
{ .port = 5, .pin = 4, .func = 1, .input = 1 },
{ .port = 5, .pin = 5, .func = 1, .input = 1 },
{ .port = 5, .pin = 6, .func = 1, .input = 1 },
{ .port = 5, .pin = 7, .func = 1, .input = 1 },
{ .port = 7, .pin = 4, .func = 6, .input = 0 },
{ .port = 7, .pin = 11, .func = 2, .input = 0 },
{ .port = 8, .pin = 10, .func = 8, .input = 0 },
{ .port = 10, .pin = 15, .func = 2, .input = 0 },
};
static const struct rza1_bidir_entry rza1h_bidir_entries[RZA1_NPORTS] = {
[1] = { ARRAY_SIZE(rza1h_bidir_pins_p1), rza1h_bidir_pins_p1 },
[2] = { ARRAY_SIZE(rza1h_bidir_pins_p2), rza1h_bidir_pins_p2 },
[3] = { ARRAY_SIZE(rza1h_bidir_pins_p3), rza1h_bidir_pins_p3 },
[4] = { ARRAY_SIZE(rza1h_bidir_pins_p4), rza1h_bidir_pins_p4 },
[6] = { ARRAY_SIZE(rza1h_bidir_pins_p6), rza1h_bidir_pins_p6 },
[7] = { ARRAY_SIZE(rza1h_bidir_pins_p7), rza1h_bidir_pins_p7 },
[8] = { ARRAY_SIZE(rza1h_bidir_pins_p8), rza1h_bidir_pins_p8 },
[9] = { ARRAY_SIZE(rza1h_bidir_pins_p9), rza1h_bidir_pins_p9 },
[11] = { ARRAY_SIZE(rza1h_bidir_pins_p11), rza1h_bidir_pins_p11 },
};
static const struct rza1_swio_entry rza1h_swio_entries[] = {
[0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins },
};
/* RZ/A1H (r7s72100x) pinmux flags table */
static const struct rza1_pinmux_conf rza1h_pmx_conf = {
.bidir_entries = rza1h_bidir_entries,
.swio_entries = rza1h_swio_entries,
};
/* ----------------------------------------------------------------------------
* RZ/A1 types
*/
/**
* rza1_mux_conf - describes a pin multiplexing operation
*
* @id: the pin identifier from 0 to RZA1_NPINS
* @port: the port where pin sits on
* @pin: pin id
* @mux_func: alternate function id number
* @mux_flags: alternate function flags
* @value: output value to set the pin to
*/
struct rza1_mux_conf {
u16 id;
u8 port;
u8 pin;
u8 mux_func;
u8 mux_flags;
u8 value;
};
/**
* rza1_port - describes a pin port
*
* This is mostly useful to lock register writes per-bank and not globally.
*
* @lock: protect access to HW registers
* @id: port number
* @base: logical address base
* @pins: pins sitting on this port
*/
struct rza1_port {
spinlock_t lock;
unsigned int id;
void __iomem *base;
struct pinctrl_pin_desc *pins;
};
/**
* rza1_pinctrl - RZ pincontroller device
*
* @dev: parent device structure
* @mutex: protect [pinctrl|pinmux]_generic functions
* @base: logical address base
* @nports: number of pin controller ports
* @ports: pin controller banks
* @pins: pin array for pinctrl core
* @desc: pincontroller desc for pinctrl core
* @pctl: pinctrl device
* @data: device specific data
*/
struct rza1_pinctrl {
struct device *dev;
struct mutex mutex;
void __iomem *base;
unsigned int nport;
struct rza1_port *ports;
struct pinctrl_pin_desc *pins;
struct pinctrl_desc desc;
struct pinctrl_dev *pctl;
const void *data;
};
/* ----------------------------------------------------------------------------
* RZ/A1 pinmux flags
*/
static inline bool rza1_pinmux_get_bidir(unsigned int port,
unsigned int pin,
unsigned int func,
const struct rza1_bidir_entry *table)
{
const struct rza1_bidir_entry *entry = &table[port];
const struct rza1_bidir_pin *bidir_pin;
unsigned int i;
for (i = 0; i < entry->npins; ++i) {
bidir_pin = &entry->pins[i];
if (bidir_pin->pin == pin && bidir_pin->func == func)
return true;
}
return false;
}
static inline int rza1_pinmux_get_swio(unsigned int port,
unsigned int pin,
unsigned int func,
const struct rza1_swio_entry *table)
{
const struct rza1_swio_pin *swio_pin;
unsigned int i;
for (i = 0; i < table->npins; ++i) {
swio_pin = &table->pins[i];
if (swio_pin->port == port && swio_pin->pin == pin &&
swio_pin->func == func)
return swio_pin->input;
}
return -ENOENT;
}
/**
* rza1_pinmux_get_flags() - return pinmux flags associated to a pin
*/
static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin,
unsigned int func,
struct rza1_pinctrl *rza1_pctl)
{
const struct rza1_pinmux_conf *pmx_conf = rza1_pctl->data;
const struct rza1_bidir_entry *bidir_entries = pmx_conf->bidir_entries;
const struct rza1_swio_entry *swio_entries = pmx_conf->swio_entries;
unsigned int pmx_flags = 0;
int ret;
if (rza1_pinmux_get_bidir(port, pin, func, bidir_entries))
pmx_flags |= MUX_FLAGS_BIDIR;
ret = rza1_pinmux_get_swio(port, pin, func, swio_entries);
if (ret == 0)
pmx_flags |= MUX_FLAGS_SWIO_OUTPUT;
else if (ret > 0)
pmx_flags |= MUX_FLAGS_SWIO_INPUT;
return pmx_flags;
}
/* ----------------------------------------------------------------------------
* RZ/A1 SoC operations
*/
/**
* rza1_set_bit() - un-locked set/clear a single bit in pin configuration
* registers
*/
static inline void rza1_set_bit(struct rza1_port *port, unsigned int reg,
unsigned int bit, bool set)
{
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
u16 val = ioread16(mem);
if (set)
val |= BIT(bit);
else
val &= ~BIT(bit);
iowrite16(val, mem);
}
static inline unsigned int rza1_get_bit(struct rza1_port *port,
unsigned int reg, unsigned int bit)
{
void __iomem *mem = RZA1_ADDR(port->base, reg, port->id);
return ioread16(mem) & BIT(bit);
}
/**
* rza1_pin_reset() - reset a pin to default initial state
*
* Reset pin state disabling input buffer and bi-directional control,
* and configure it as input port.
* Note that pin is now configured with direction as input but with input
* buffer disabled. This implies the pin value cannot be read in this state.
*
* @port: port where pin sits on
* @pin: pin offset
*/
static void rza1_pin_reset(struct rza1_port *port, unsigned int pin)
{
unsigned long irqflags;
spin_lock_irqsave(&port->lock, irqflags);
rza1_set_bit(port, RZA1_PIBC_REG, pin, 0);
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
rza1_set_bit(port, RZA1_PMC_REG, pin, 0);
rza1_set_bit(port, RZA1_PIPC_REG, pin, 0);
spin_unlock_irqrestore(&port->lock, irqflags);
}
static inline int rza1_pin_get_direction(struct rza1_port *port,
unsigned int pin)
{
unsigned long irqflags;
int input;
spin_lock_irqsave(&port->lock, irqflags);
input = rza1_get_bit(port, RZA1_PM_REG, pin);
spin_unlock_irqrestore(&port->lock, irqflags);
return !!input;
}
/**
* rza1_pin_set_direction() - set I/O direction on a pin in port mode
*
* When running in output port mode keep PBDC enabled to allow reading the
* pin value from PPR.
*
* @port: port where pin sits on
* @pin: pin offset
* @input: input enable/disable flag
*/
static inline void rza1_pin_set_direction(struct rza1_port *port,
unsigned int pin, bool input)
{
unsigned long irqflags;
spin_lock_irqsave(&port->lock, irqflags);
rza1_set_bit(port, RZA1_PIBC_REG, pin, 1);
if (input) {
rza1_set_bit(port, RZA1_PM_REG, pin, 1);
rza1_set_bit(port, RZA1_PBDC_REG, pin, 0);
} else {
rza1_set_bit(port, RZA1_PM_REG, pin, 0);
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
}
spin_unlock_irqrestore(&port->lock, irqflags);
}
static inline void rza1_pin_set(struct rza1_port *port, unsigned int pin,
unsigned int value)
{
unsigned long irqflags;
spin_lock_irqsave(&port->lock, irqflags);
rza1_set_bit(port, RZA1_P_REG, pin, !!value);
spin_unlock_irqrestore(&port->lock, irqflags);
}
static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin)
{
unsigned long irqflags;
int val;
spin_lock_irqsave(&port->lock, irqflags);
val = rza1_get_bit(port, RZA1_PPR_REG, pin);
spin_unlock_irqrestore(&port->lock, irqflags);
return val;
}
/**
* rza1_pin_mux_single() - configure pin multiplexing on a single pin
*
* @pinctrl: RZ/A1 pin controller device
* @mux_conf: pin multiplexing descriptor
*/
static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl,
struct rza1_mux_conf *mux_conf)
{
struct rza1_port *port = &rza1_pctl->ports[mux_conf->port];
unsigned int pin = mux_conf->pin;
u8 mux_func = mux_conf->mux_func;
u8 mux_flags = mux_conf->mux_flags;
u8 mux_flags_from_table;
rza1_pin_reset(port, pin);
/* SWIO pinmux flags coming from DT are high precedence */
mux_flags_from_table = rza1_pinmux_get_flags(port->id, pin, mux_func,
rza1_pctl);
if (mux_flags)
mux_flags |= (mux_flags_from_table & MUX_FLAGS_BIDIR);
else
mux_flags = mux_flags_from_table;
if (mux_flags & MUX_FLAGS_BIDIR)
rza1_set_bit(port, RZA1_PBDC_REG, pin, 1);
/*
* Enable alternate function mode and select it.
*
* Be careful here: the pin mux sub-nodes in device tree
* enumerate alternate functions from 1 to 8;
* subtract 1 before using macros to match registers configuration
* which expects numbers from 0 to 7 instead.
*
* ----------------------------------------------------
* Alternate mode selection table:
*
* PMC PFC PFCE PFCAE (mux_func - 1)
* 1 0 0 0 0
* 1 1 0 0 1
* 1 0 1 0 2
* 1 1 1 0 3
* 1 0 0 1 4
* 1 1 0 1 5
* 1 0 1 1 6
* 1 1 1 1 7
* ----------------------------------------------------
*/
mux_func -= 1;
rza1_set_bit(port, RZA1_PFC_REG, pin, mux_func & MUX_FUNC_PFC_MASK);
rza1_set_bit(port, RZA1_PFCE_REG, pin, mux_func & MUX_FUNC_PFCE_MASK);
rza1_set_bit(port, RZA1_PFCEA_REG, pin, mux_func & MUX_FUNC_PFCEA_MASK);
/*
* All alternate functions except a few need PIPCn = 1.
* If PIPCn has to stay disabled (SW IO mode), configure PMn according
* to I/O direction specified by pin configuration -after- PMC has been
* set to one.
*/
if (mux_flags & (MUX_FLAGS_SWIO_INPUT | MUX_FLAGS_SWIO_OUTPUT))
rza1_set_bit(port, RZA1_PM_REG, pin,
mux_flags & MUX_FLAGS_SWIO_INPUT);
else
rza1_set_bit(port, RZA1_PIPC_REG, pin, 1);
rza1_set_bit(port, RZA1_PMC_REG, pin, 1);
return 0;
}
/* ----------------------------------------------------------------------------
* gpio operations
*/
/**
* rza1_gpio_request() - configure pin in port mode
*
* Configure a pin as gpio (port mode).
* After reset, the pin is in input mode with input buffer disabled.
* To use the pin as input or output, set_direction shall be called first
*
* @chip: gpio chip where the gpio sits on
* @gpio: gpio offset
*/
static int rza1_gpio_request(struct gpio_chip *chip, unsigned int gpio)
{
struct rza1_port *port = gpiochip_get_data(chip);
rza1_pin_reset(port, gpio);
return 0;
}
/**
* rza1_gpio_disable_free() - reset a pin
*
* Surprisingly, disable_free a gpio, is equivalent to request it.
* Reset pin to port mode, with input buffer disabled. This overwrites all
* port direction settings applied with set_direction
*
* @chip: gpio chip where the gpio sits on
* @gpio: gpio offset
*/
static void rza1_gpio_free(struct gpio_chip *chip, unsigned int gpio)
{
struct rza1_port *port = gpiochip_get_data(chip);
rza1_pin_reset(port, gpio);
}
static int rza1_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
{
struct rza1_port *port = gpiochip_get_data(chip);
return rza1_pin_get_direction(port, gpio);
}
static int rza1_gpio_direction_input(struct gpio_chip *chip,
unsigned int gpio)
{
struct rza1_port *port = gpiochip_get_data(chip);
rza1_pin_set_direction(port, gpio, true);
return 0;
}
static int rza1_gpio_direction_output(struct gpio_chip *chip,
unsigned int gpio,
int value)
{
struct rza1_port *port = gpiochip_get_data(chip);
/* Set value before driving pin direction */
rza1_pin_set(port, gpio, value);
rza1_pin_set_direction(port, gpio, false);
return 0;
}
/**
* rza1_gpio_get() - read a gpio pin value
*
* Read gpio pin value through PPR register.
* Requires bi-directional mode to work when reading the value of a pin
* in output mode
*
* @chip: gpio chip where the gpio sits on
* @gpio: gpio offset
*/
static int rza1_gpio_get(struct gpio_chip *chip, unsigned int gpio)
{
struct rza1_port *port = gpiochip_get_data(chip);
return rza1_pin_get(port, gpio);
}
static void rza1_gpio_set(struct gpio_chip *chip, unsigned int gpio,
int value)
{
struct rza1_port *port = gpiochip_get_data(chip);
rza1_pin_set(port, gpio, value);
}
struct gpio_chip rza1_gpiochip_template = {
.request = rza1_gpio_request,
.free = rza1_gpio_free,
.get_direction = rza1_gpio_get_direction,
.direction_input = rza1_gpio_direction_input,
.direction_output = rza1_gpio_direction_output,
.get = rza1_gpio_get,
.set = rza1_gpio_set,
};
/* ----------------------------------------------------------------------------
* pinctrl operations
*/
/**
* rza1_dt_node_pin_count() - Count number of pins in a dt node or in all its
* children sub-nodes
*
* @np: device tree node to parse
*/
static int rza1_dt_node_pin_count(struct device_node *np)
{
struct device_node *child;
struct property *of_pins;
unsigned int npins;
of_pins = of_find_property(np, "pinmux", NULL);
if (of_pins)
return of_pins->length / sizeof(u32);
npins = 0;
for_each_child_of_node(np, child) {
of_pins = of_find_property(child, "pinmux", NULL);
if (!of_pins)
return -EINVAL;
npins += of_pins->length / sizeof(u32);
}
return npins;
}
/**
* rza1_parse_pmx_function() - parse a pin mux sub-node
*
* @rza1_pctl: RZ/A1 pin controller device
* @np: of pmx sub-node
* @mux_confs: array of pin mux configurations to fill with parsed info
* @grpins: array of pin ids to mux
*/
static int rza1_parse_pinmux_node(struct rza1_pinctrl *rza1_pctl,
struct device_node *np,
struct rza1_mux_conf *mux_confs,
unsigned int *grpins)
{
struct pinctrl_dev *pctldev = rza1_pctl->pctl;
char const *prop_name = "pinmux";
unsigned long *pin_configs;
unsigned int npin_configs;
struct property *of_pins;
unsigned int npins;
u8 pinmux_flags;
unsigned int i;
int ret;
of_pins = of_find_property(np, prop_name, NULL);
if (!of_pins) {
dev_dbg(rza1_pctl->dev, "Missing %s property\n", prop_name);
return -ENOENT;
}
npins = of_pins->length / sizeof(u32);
/*
* Collect pin configuration properties: they apply to all pins in
* this sub-node
*/
ret = pinconf_generic_parse_dt_config(np, pctldev, &pin_configs,
&npin_configs);
if (ret) {
dev_err(rza1_pctl->dev,
"Unable to parse pin configuration options for %s\n",
np->name);
return ret;
}
/*
* Create a mask with pinmux flags from pin configuration;
* very few pins (TIOC[0-4][A|B|C|D] require SWIO direction
* specified in device tree.
*/
pinmux_flags = 0;
for (i = 0; i < npin_configs && pinmux_flags == 0; i++)
switch (pinconf_to_config_param(pin_configs[i])) {
case PIN_CONFIG_INPUT_ENABLE:
pinmux_flags |= MUX_FLAGS_SWIO_INPUT;
break;
case PIN_CONFIG_OUTPUT:
pinmux_flags |= MUX_FLAGS_SWIO_OUTPUT;
default:
break;
}
kfree(pin_configs);
/* Collect pin positions and their mux settings. */
for (i = 0; i < npins; ++i) {
u32 of_pinconf;
struct rza1_mux_conf *mux_conf = &mux_confs[i];
ret = of_property_read_u32_index(np, prop_name, i, &of_pinconf);
if (ret)
return ret;
mux_conf->id = of_pinconf & MUX_PIN_ID_MASK;
mux_conf->port = RZA1_PIN_ID_TO_PORT(mux_conf->id);
mux_conf->pin = RZA1_PIN_ID_TO_PIN(mux_conf->id);
mux_conf->mux_func = MUX_FUNC(of_pinconf);
mux_conf->mux_flags = pinmux_flags;
if (mux_conf->port >= RZA1_NPORTS ||
mux_conf->pin >= RZA1_PINS_PER_PORT) {
dev_err(rza1_pctl->dev,
"Wrong port %u pin %u for %s property\n",
mux_conf->port, mux_conf->pin, prop_name);
return -EINVAL;
}
grpins[i] = mux_conf->id;
}
return npins;
}
/**
* rza1_dt_node_to_map() - map a pin mux node to a function/group
*
* Parse and register a pin mux function.
*
* @pctldev: pin controller device
* @np: device tree node to parse
* @map: pointer to pin map (output)
* @num_maps: number of collected maps (output)
*/
static int rza1_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map,
unsigned int *num_maps)
{
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
struct rza1_mux_conf *mux_confs, *mux_conf;
unsigned int *grpins, *grpin;
struct device_node *child;
const char *grpname;
const char **fngrps;
int ret, npins;
npins = rza1_dt_node_pin_count(np);
if (npins < 0) {
dev_err(rza1_pctl->dev, "invalid pinmux node structure\n");
return -EINVAL;
}
/*
* Functions are made of 1 group only;
* in fact, functions and groups are identical for this pin controller
* except that functions carry an array of per-pin mux configuration
* settings.
*/
mux_confs = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*mux_confs),
GFP_KERNEL);
grpins = devm_kcalloc(rza1_pctl->dev, npins, sizeof(*grpins),
GFP_KERNEL);
fngrps = devm_kzalloc(rza1_pctl->dev, sizeof(*fngrps), GFP_KERNEL);
if (!mux_confs || !grpins || !fngrps)
return -ENOMEM;
/*
* Parse the pinmux node.
* If the node does not contain "pinmux" property (-ENOENT)
* that property shall be specified in all its children sub-nodes.
*/
mux_conf = &mux_confs[0];
grpin = &grpins[0];
ret = rza1_parse_pinmux_node(rza1_pctl, np, mux_conf, grpin);
if (ret == -ENOENT)
for_each_child_of_node(np, child) {
ret = rza1_parse_pinmux_node(rza1_pctl, child, mux_conf,
grpin);
if (ret < 0)
return ret;
grpin += ret;
mux_conf += ret;
}
else if (ret < 0)
return ret;
/* Register pin group and function name to pinctrl_generic */
grpname = np->name;
fngrps[0] = grpname;
mutex_lock(&rza1_pctl->mutex);
ret = pinctrl_generic_add_group(pctldev, grpname, grpins, npins,
NULL);
if (ret) {
mutex_unlock(&rza1_pctl->mutex);
return ret;
}
ret = pinmux_generic_add_function(pctldev, grpname, fngrps, 1,
mux_confs);
if (ret)
goto remove_group;
mutex_unlock(&rza1_pctl->mutex);
dev_info(rza1_pctl->dev, "Parsed function and group %s with %d pins\n",
grpname, npins);
/* Create map where to retrieve function and mux settings from */
*num_maps = 0;
*map = kzalloc(sizeof(**map), GFP_KERNEL);
if (!*map) {
ret = -ENOMEM;
goto remove_function;
}
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->data.mux.group = np->name;
(*map)->data.mux.function = np->name;
*num_maps = 1;
return 0;
remove_function:
mutex_lock(&rza1_pctl->mutex);
pinmux_generic_remove_last_function(pctldev);
remove_group:
pinctrl_generic_remove_last_group(pctldev);
mutex_unlock(&rza1_pctl->mutex);
dev_info(rza1_pctl->dev, "Unable to parse function and group %s\n",
grpname);
return ret;
}
static void rza1_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned int num_maps)
{
kfree(map);
}
static const struct pinctrl_ops rza1_pinctrl_ops = {
.get_groups_count = pinctrl_generic_get_group_count,
.get_group_name = pinctrl_generic_get_group_name,
.get_group_pins = pinctrl_generic_get_group_pins,
.dt_node_to_map = rza1_dt_node_to_map,
.dt_free_map = rza1_dt_free_map,
};
/* ----------------------------------------------------------------------------
* pinmux operations
*/
/**
* rza1_set_mux() - retrieve pins from a group and apply their mux settings
*
* @pctldev: pin controller device
* @selector: function selector
* @group: group selector
*/
static int rza1_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
unsigned int group)
{
struct rza1_pinctrl *rza1_pctl = pinctrl_dev_get_drvdata(pctldev);
struct rza1_mux_conf *mux_confs;
struct function_desc *func;
struct group_desc *grp;
int i;
grp = pinctrl_generic_get_group(pctldev, group);
if (!grp)
return -EINVAL;
func = pinmux_generic_get_function(pctldev, selector);
if (!func)
return -EINVAL;
mux_confs = (struct rza1_mux_conf *)func->data;
for (i = 0; i < grp->num_pins; ++i) {
int ret;
ret = rza1_pin_mux_single(rza1_pctl, &mux_confs[i]);
if (ret)
return ret;
}
return 0;
}
struct pinmux_ops rza1_pinmux_ops = {
.get_functions_count = pinmux_generic_get_function_count,
.get_function_name = pinmux_generic_get_function_name,
.get_function_groups = pinmux_generic_get_function_groups,
.set_mux = rza1_set_mux,
.strict = true,
};
/* ----------------------------------------------------------------------------
* RZ/A1 pin controller driver operations
*/
static unsigned int rza1_count_gpio_chips(struct device_node *np)
{
struct device_node *child;
unsigned int count = 0;
for_each_child_of_node(np, child) {
if (!of_property_read_bool(child, "gpio-controller"))
continue;
count++;
}
return count;
}
/**
* rza1_parse_gpiochip() - parse and register a gpio chip and pin range
*
* The gpio controller subnode shall provide a "gpio-ranges" list property as
* defined by gpio device tree binding documentation.
*
* @rza1_pctl: RZ/A1 pin controller device
* @np: of gpio-controller node
* @chip: gpio chip to register to gpiolib
* @range: pin range to register to pinctrl core
*/
static int rza1_parse_gpiochip(struct rza1_pinctrl *rza1_pctl,
struct device_node *np,
struct gpio_chip *chip,
struct pinctrl_gpio_range *range)
{
const char *list_name = "gpio-ranges";
struct of_phandle_args of_args;
unsigned int gpioport;
u32 pinctrl_base;
int ret;
ret = of_parse_phandle_with_fixed_args(np, list_name, 3, 0, &of_args);
if (ret) {
dev_err(rza1_pctl->dev, "Unable to parse %s list property\n",
list_name);
return ret;
}
/*
* Find out on which port this gpio-chip maps to by inspecting the
* second argument of the "gpio-ranges" property.
*/
pinctrl_base = of_args.args[1];
gpioport = RZA1_PIN_ID_TO_PORT(pinctrl_base);
if (gpioport > RZA1_NPORTS) {
dev_err(rza1_pctl->dev,
"Invalid values in property %s\n", list_name);
return -EINVAL;
}
*chip = rza1_gpiochip_template;
chip->base = -1;
chip->label = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL, "%s-%u",
np->name, gpioport);
chip->ngpio = of_args.args[2];
chip->of_node = np;
chip->parent = rza1_pctl->dev;
range->id = gpioport;
range->name = chip->label;
range->pin_base = range->base = pinctrl_base;
range->npins = of_args.args[2];
range->gc = chip;
ret = devm_gpiochip_add_data(rza1_pctl->dev, chip,
&rza1_pctl->ports[gpioport]);
if (ret)
return ret;
pinctrl_add_gpio_range(rza1_pctl->pctl, range);
dev_info(rza1_pctl->dev, "Parsed gpiochip %s with %d pins\n",
chip->label, chip->ngpio);
return 0;
}
/**
* rza1_gpio_register() - parse DT to collect gpio-chips and gpio-ranges
*
* @rza1_pctl: RZ/A1 pin controller device
*/
static int rza1_gpio_register(struct rza1_pinctrl *rza1_pctl)
{
struct device_node *np = rza1_pctl->dev->of_node;
struct pinctrl_gpio_range *gpio_ranges;
struct gpio_chip *gpio_chips;
struct device_node *child;
unsigned int ngpiochips;
unsigned int i;
int ret;
ngpiochips = rza1_count_gpio_chips(np);
if (ngpiochips == 0) {
dev_dbg(rza1_pctl->dev, "No gpiochip registered\n");
return 0;
}
gpio_chips = devm_kcalloc(rza1_pctl->dev, ngpiochips,
sizeof(*gpio_chips), GFP_KERNEL);
gpio_ranges = devm_kcalloc(rza1_pctl->dev, ngpiochips,
sizeof(*gpio_ranges), GFP_KERNEL);
if (!gpio_chips || !gpio_ranges)
return -ENOMEM;
i = 0;
for_each_child_of_node(np, child) {
if (!of_property_read_bool(child, "gpio-controller"))
continue;
ret = rza1_parse_gpiochip(rza1_pctl, child, &gpio_chips[i],
&gpio_ranges[i]);
if (ret)
goto gpiochip_remove;
++i;
}
dev_info(rza1_pctl->dev, "Registered %u gpio controllers\n", i);
return 0;
gpiochip_remove:
for (; i > 0; i--)
devm_gpiochip_remove(rza1_pctl->dev, &gpio_chips[i - 1]);
return ret;
}
/**
* rza1_pinctrl_register() - Enumerate pins, ports and gpiochips; register
* them to pinctrl and gpio cores.
*
* @rza1_pctl: RZ/A1 pin controller device
*/
static int rza1_pinctrl_register(struct rza1_pinctrl *rza1_pctl)
{
struct pinctrl_pin_desc *pins;
struct rza1_port *ports;
unsigned int i;
int ret;
pins = devm_kcalloc(rza1_pctl->dev, RZA1_NPINS, sizeof(*pins),
GFP_KERNEL);
ports = devm_kcalloc(rza1_pctl->dev, RZA1_NPORTS, sizeof(*ports),
GFP_KERNEL);
if (!pins || !ports)
return -ENOMEM;
rza1_pctl->pins = pins;
rza1_pctl->desc.pins = pins;
rza1_pctl->desc.npins = RZA1_NPINS;
rza1_pctl->ports = ports;
for (i = 0; i < RZA1_NPINS; ++i) {
unsigned int pin = RZA1_PIN_ID_TO_PIN(i);
unsigned int port = RZA1_PIN_ID_TO_PORT(i);
pins[i].number = i;
pins[i].name = devm_kasprintf(rza1_pctl->dev, GFP_KERNEL,
"P%u-%u", port, pin);
if (i % RZA1_PINS_PER_PORT == 0) {
/*
* Setup ports;
* they provide per-port lock and logical base address.
*/
unsigned int port_id = RZA1_PIN_ID_TO_PORT(i);
ports[port_id].id = port_id;
ports[port_id].base = rza1_pctl->base;
ports[port_id].pins = &pins[i];
spin_lock_init(&ports[port_id].lock);
}
}
ret = devm_pinctrl_register_and_init(rza1_pctl->dev, &rza1_pctl->desc,
rza1_pctl, &rza1_pctl->pctl);
if (ret) {
dev_err(rza1_pctl->dev,
"RZ/A1 pin controller registration failed\n");
return ret;
}
ret = pinctrl_enable(rza1_pctl->pctl);
if (ret) {
dev_err(rza1_pctl->dev,
"RZ/A1 pin controller failed to start\n");
return ret;
}
ret = rza1_gpio_register(rza1_pctl);
if (ret) {
dev_err(rza1_pctl->dev, "RZ/A1 GPIO registration failed\n");
return ret;
}
return 0;
}
static int rza1_pinctrl_probe(struct platform_device *pdev)
{
struct rza1_pinctrl *rza1_pctl;
struct resource *res;
int ret;
rza1_pctl = devm_kzalloc(&pdev->dev, sizeof(*rza1_pctl), GFP_KERNEL);
if (!rza1_pctl)
return -ENOMEM;
rza1_pctl->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rza1_pctl->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rza1_pctl->base))
return PTR_ERR(rza1_pctl->base);
mutex_init(&rza1_pctl->mutex);
platform_set_drvdata(pdev, rza1_pctl);
rza1_pctl->desc.name = DRIVER_NAME;
rza1_pctl->desc.pctlops = &rza1_pinctrl_ops;
rza1_pctl->desc.pmxops = &rza1_pinmux_ops;
rza1_pctl->desc.owner = THIS_MODULE;
rza1_pctl->data = of_device_get_match_data(&pdev->dev);
ret = rza1_pinctrl_register(rza1_pctl);
if (ret)
return ret;
dev_info(&pdev->dev,
"RZ/A1 pin controller and gpio successfully registered\n");
return 0;
}
static const struct of_device_id rza1_pinctrl_of_match[] = {
{
.compatible = "renesas,r7s72100-ports",
.data = &rza1h_pmx_conf,
},
{ }
};
static struct platform_driver rza1_pinctrl_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = rza1_pinctrl_of_match,
},
.probe = rza1_pinctrl_probe,
};
static int __init rza1_pinctrl_init(void)
{
return platform_driver_register(&rza1_pinctrl_driver);
}
core_initcall(rza1_pinctrl_init);
MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org");
MODULE_DESCRIPTION("Pin and gpio controller driver for Reneas RZ/A1 SoC");
MODULE_LICENSE("GPL v2");