mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 07:33:56 +00:00
82ab1eeceb
also change __devinit tag for sgiioc4.c:ioc4_ide_init() to __init Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
315 lines
8.3 KiB
C
315 lines
8.3 KiB
C
/*
|
|
* linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
|
|
*
|
|
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
|
|
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
|
|
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
|
|
*
|
|
* Inspired by an earlier effort from David S. Miller <davem@redhat.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#ifdef CONFIG_SUPERIO
|
|
/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
|
|
* Unfortunately, it's built-in on all Astro-based PA-RISC workstations
|
|
* which use the integrated NS87514 cell for CD-ROM support.
|
|
* i.e we have to support for CD-ROM installs.
|
|
* See drivers/parisc/superio.c for more gory details.
|
|
*/
|
|
#include <asm/superio.h>
|
|
|
|
static unsigned long superio_ide_status[2];
|
|
static unsigned long superio_ide_select[2];
|
|
static unsigned long superio_ide_dma_status[2];
|
|
|
|
#define SUPERIO_IDE_MAX_RETRIES 25
|
|
|
|
/* Because of a defect in Super I/O, all reads of the PCI DMA status
|
|
* registers, IDE status register and the IDE select register need to be
|
|
* retried
|
|
*/
|
|
static u8 superio_ide_inb (unsigned long port)
|
|
{
|
|
if (port == superio_ide_status[0] ||
|
|
port == superio_ide_status[1] ||
|
|
port == superio_ide_select[0] ||
|
|
port == superio_ide_select[1] ||
|
|
port == superio_ide_dma_status[0] ||
|
|
port == superio_ide_dma_status[1]) {
|
|
u8 tmp;
|
|
int retries = SUPERIO_IDE_MAX_RETRIES;
|
|
|
|
/* printk(" [ reading port 0x%x with retry ] ", port); */
|
|
|
|
do {
|
|
tmp = inb(port);
|
|
if (tmp == 0)
|
|
udelay(50);
|
|
} while (tmp == 0 && retries-- > 0);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
return inb(port);
|
|
}
|
|
|
|
static void __devinit superio_ide_init_iops (struct hwif_s *hwif)
|
|
{
|
|
u32 base, dmabase;
|
|
u8 tmp;
|
|
struct pci_dev *pdev = hwif->pci_dev;
|
|
u8 port = hwif->channel;
|
|
|
|
base = pci_resource_start(pdev, port * 2) & ~3;
|
|
dmabase = pci_resource_start(pdev, 4) & ~3;
|
|
|
|
superio_ide_status[port] = base + IDE_STATUS_OFFSET;
|
|
superio_ide_select[port] = base + IDE_SELECT_OFFSET;
|
|
superio_ide_dma_status[port] = dmabase + (!port ? 2 : 0xa);
|
|
|
|
/* Clear error/interrupt, enable dma */
|
|
tmp = superio_ide_inb(superio_ide_dma_status[port]);
|
|
outb(tmp | 0x66, superio_ide_dma_status[port]);
|
|
|
|
/* We need to override inb to workaround a SuperIO errata */
|
|
hwif->INB = superio_ide_inb;
|
|
}
|
|
|
|
static void __devinit init_iops_ns87415(ide_hwif_t *hwif)
|
|
{
|
|
if (PCI_SLOT(hwif->pci_dev->devfn) == 0xE) {
|
|
/* Built-in - assume it's under superio. */
|
|
superio_ide_init_iops(hwif);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
|
|
|
|
/*
|
|
* This routine either enables/disables (according to drive->present)
|
|
* the IRQ associated with the port (HWIF(drive)),
|
|
* and selects either PIO or DMA handshaking for the next I/O operation.
|
|
*/
|
|
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
new = *old;
|
|
|
|
/* Adjust IRQ enable bit */
|
|
bit = 1 << (8 + hwif->channel);
|
|
new = drive->present ? (new & ~bit) : (new | bit);
|
|
|
|
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
|
|
bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1));
|
|
other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
|
|
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
|
|
|
|
if (new != *old) {
|
|
unsigned char stat;
|
|
|
|
/*
|
|
* Don't change DMA engine settings while Write Buffers
|
|
* are busy.
|
|
*/
|
|
(void) pci_read_config_byte(dev, 0x43, &stat);
|
|
while (stat & 0x03) {
|
|
udelay(1);
|
|
(void) pci_read_config_byte(dev, 0x43, &stat);
|
|
}
|
|
|
|
*old = new;
|
|
(void) pci_write_config_dword(dev, 0x40, new);
|
|
|
|
/*
|
|
* And let things settle...
|
|
*/
|
|
udelay(10);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void ns87415_selectproc (ide_drive_t *drive)
|
|
{
|
|
ns87415_prepare_drive (drive, drive->using_dma);
|
|
}
|
|
|
|
static int ns87415_ide_dma_end (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_stat = 0, dma_cmd = 0;
|
|
|
|
drive->waiting_for_dma = 0;
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
/* get dma command mode */
|
|
dma_cmd = hwif->INB(hwif->dma_command);
|
|
/* stop DMA */
|
|
hwif->OUTB(dma_cmd & ~1, hwif->dma_command);
|
|
/* from ERRATA: clear the INTR & ERROR bits */
|
|
dma_cmd = hwif->INB(hwif->dma_command);
|
|
hwif->OUTB(dma_cmd|6, hwif->dma_command);
|
|
/* and free any DMA resources */
|
|
ide_destroy_dmatable(drive);
|
|
/* verify good DMA status */
|
|
return (dma_stat & 7) != 4;
|
|
}
|
|
|
|
static int ns87415_ide_dma_setup(ide_drive_t *drive)
|
|
{
|
|
/* select DMA xfer */
|
|
ns87415_prepare_drive(drive, 1);
|
|
if (!ide_dma_setup(drive))
|
|
return 0;
|
|
/* DMA failed: select PIO xfer */
|
|
ns87415_prepare_drive(drive, 0);
|
|
return 1;
|
|
}
|
|
|
|
static int ns87415_ide_dma_check (ide_drive_t *drive)
|
|
{
|
|
if (drive->media != ide_disk)
|
|
return HWIF(drive)->ide_dma_off_quietly(drive);
|
|
return __ide_dma_check(drive);
|
|
}
|
|
|
|
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
unsigned int ctrl, using_inta;
|
|
u8 progif;
|
|
#ifdef __sparc_v9__
|
|
int timeout;
|
|
u8 stat;
|
|
#endif
|
|
|
|
hwif->autodma = 0;
|
|
hwif->selectproc = &ns87415_selectproc;
|
|
|
|
/*
|
|
* We cannot probe for IRQ: both ports share common IRQ on INTA.
|
|
* Also, leave IRQ masked during drive probing, to prevent infinite
|
|
* interrupts from a potentially floating INTA..
|
|
*
|
|
* IRQs get unmasked in selectproc when drive is first used.
|
|
*/
|
|
(void) pci_read_config_dword(dev, 0x40, &ctrl);
|
|
(void) pci_read_config_byte(dev, 0x09, &progif);
|
|
/* is irq in "native" mode? */
|
|
using_inta = progif & (1 << (hwif->channel << 1));
|
|
if (!using_inta)
|
|
using_inta = ctrl & (1 << (4 + hwif->channel));
|
|
if (hwif->mate) {
|
|
hwif->select_data = hwif->mate->select_data;
|
|
} else {
|
|
hwif->select_data = (unsigned long)
|
|
&ns87415_control[ns87415_count++];
|
|
ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
|
|
if (using_inta)
|
|
ctrl &= ~(1 << 6); /* unmask INTA */
|
|
*((unsigned int *)hwif->select_data) = ctrl;
|
|
(void) pci_write_config_dword(dev, 0x40, ctrl);
|
|
|
|
/*
|
|
* Set prefetch size to 512 bytes for both ports,
|
|
* but don't turn on/off prefetching here.
|
|
*/
|
|
pci_write_config_byte(dev, 0x55, 0xee);
|
|
|
|
#ifdef __sparc_v9__
|
|
/*
|
|
* XXX: Reset the device, if we don't it will not respond
|
|
* to SELECT_DRIVE() properly during first probe_hwif().
|
|
*/
|
|
timeout = 10000;
|
|
hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
|
|
udelay(10);
|
|
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
|
|
do {
|
|
udelay(50);
|
|
stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
|
|
if (stat == 0xff)
|
|
break;
|
|
} while ((stat & BUSY_STAT) && --timeout);
|
|
#endif
|
|
}
|
|
|
|
if (!using_inta)
|
|
hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
|
|
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
|
|
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
|
|
|
|
if (!hwif->dma_base)
|
|
return;
|
|
|
|
hwif->OUTB(0x60, hwif->dma_status);
|
|
hwif->dma_setup = &ns87415_ide_dma_setup;
|
|
hwif->ide_dma_check = &ns87415_ide_dma_check;
|
|
hwif->ide_dma_end = &ns87415_ide_dma_end;
|
|
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t ns87415_chipset __devinitdata = {
|
|
.name = "NS87415",
|
|
#ifdef CONFIG_SUPERIO
|
|
.init_iops = init_iops_ns87415,
|
|
#endif
|
|
.init_hwif = init_hwif_ns87415,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = ON_BOARD,
|
|
};
|
|
|
|
static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_setup_pci_device(dev, &ns87415_chipset);
|
|
}
|
|
|
|
static struct pci_device_id ns87415_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "NS87415_IDE",
|
|
.id_table = ns87415_pci_tbl,
|
|
.probe = ns87415_init_one,
|
|
};
|
|
|
|
static int __init ns87415_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(ns87415_ide_init);
|
|
|
|
MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
|
|
MODULE_LICENSE("GPL");
|