mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 21:21:47 +00:00
3b6bc354cb
We call snd_soc_register_dais() in sh4_soc_dai_probe(), thus we should call snd_soc_unregister_dais() in sh4_soc_dai_remove(). Otherwise, we got "too many arguments to function 'snd_soc_unregister_dai'" error message. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
419 lines
10 KiB
C
419 lines
10 KiB
C
/*
|
|
* Serial Sound Interface (I2S) support for SH7760/SH7780
|
|
*
|
|
* Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
|
|
*
|
|
* licensed under the terms outlined in the file COPYING at the root
|
|
* of the linux kernel sources.
|
|
*
|
|
* dont forget to set IPSEL/OMSEL register bits (in your board code) to
|
|
* enable SSI output pins!
|
|
*/
|
|
|
|
/*
|
|
* LIMITATIONS:
|
|
* The SSI unit has only one physical data line, so full duplex is
|
|
* impossible. This can be remedied on the SH7760 by using the
|
|
* other SSI unit for recording; however the SH7780 has only 1 SSI
|
|
* unit, and its pins are shared with the AC97 unit, among others.
|
|
*
|
|
* FEATURES:
|
|
* The SSI features "compressed mode": in this mode it continuously
|
|
* streams PCM data over the I2S lines and uses LRCK as a handshake
|
|
* signal. Can be used to send compressed data (AC3/DTS) to a DSP.
|
|
* The number of bits sent over the wire in a frame can be adjusted
|
|
* and can be independent from the actual sample bit depth. This is
|
|
* useful to support TDM mode codecs like the AD1939 which have a
|
|
* fixed TDM slot size, regardless of sample resolution.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
#include <asm/io.h>
|
|
|
|
#define SSICR 0x00
|
|
#define SSISR 0x04
|
|
|
|
#define CR_DMAEN (1 << 28)
|
|
#define CR_CHNL_SHIFT 22
|
|
#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
|
|
#define CR_DWL_SHIFT 19
|
|
#define CR_DWL_MASK (7 << CR_DWL_SHIFT)
|
|
#define CR_SWL_SHIFT 16
|
|
#define CR_SWL_MASK (7 << CR_SWL_SHIFT)
|
|
#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
|
|
#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
|
|
#define CR_SCKP (1 << 13) /* I2Sclock polarity */
|
|
#define CR_SWSP (1 << 12) /* LRCK polarity */
|
|
#define CR_SPDP (1 << 11)
|
|
#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
|
|
#define CR_PDTA (1 << 9) /* fifo data alignment */
|
|
#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
|
|
#define CR_BREN (1 << 7) /* clock gating in burst mode */
|
|
#define CR_CKDIV_SHIFT 4
|
|
#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
|
|
#define CR_MUTE (1 << 3) /* SSI mute */
|
|
#define CR_CPEN (1 << 2) /* compressed mode */
|
|
#define CR_TRMD (1 << 1) /* transmit/receive select */
|
|
#define CR_EN (1 << 0) /* enable SSI */
|
|
|
|
#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
|
|
|
|
struct ssi_priv {
|
|
unsigned long mmio;
|
|
unsigned long sysclk;
|
|
int inuse;
|
|
} ssi_cpu_data[] = {
|
|
#if defined(CONFIG_CPU_SUBTYPE_SH7760)
|
|
{
|
|
.mmio = 0xFE680000,
|
|
},
|
|
{
|
|
.mmio = 0xFE690000,
|
|
},
|
|
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
|
|
{
|
|
.mmio = 0xFFE70000,
|
|
},
|
|
#else
|
|
#error "Unsupported SuperH SoC"
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* track usage of the SSI; it is simplex-only so prevent attempts of
|
|
* concurrent playback + capture. FIXME: any locking required?
|
|
*/
|
|
static int ssi_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
if (ssi->inuse) {
|
|
pr_debug("ssi: already in use!\n");
|
|
return -EBUSY;
|
|
} else
|
|
ssi->inuse = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void ssi_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
|
|
ssi->inuse = 0;
|
|
}
|
|
|
|
static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
SSIREG(SSICR) |= CR_DMAEN | CR_EN;
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssi_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
unsigned long ssicr = SSIREG(SSICR);
|
|
unsigned int bits, channels, swl, recv, i;
|
|
|
|
channels = params_channels(params);
|
|
bits = params->msbits;
|
|
recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
|
|
|
|
pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
|
|
pr_debug("bits: %u channels: %u\n", bits, channels);
|
|
|
|
ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
|
|
CR_SWL_MASK);
|
|
|
|
/* direction (send/receive) */
|
|
if (!recv)
|
|
ssicr |= CR_TRMD; /* transmit */
|
|
|
|
/* channels */
|
|
if ((channels < 2) || (channels > 8) || (channels & 1)) {
|
|
pr_debug("ssi: invalid number of channels\n");
|
|
return -EINVAL;
|
|
}
|
|
ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
|
|
|
|
/* DATA WORD LENGTH (DWL): databits in audio sample */
|
|
i = 0;
|
|
switch (bits) {
|
|
case 32: ++i;
|
|
case 24: ++i;
|
|
case 22: ++i;
|
|
case 20: ++i;
|
|
case 18: ++i;
|
|
case 16: ++i;
|
|
ssicr |= i << CR_DWL_SHIFT;
|
|
case 8: break;
|
|
default:
|
|
pr_debug("ssi: invalid sample width\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
|
|
* wires. This is usually bits_per_sample x channels/2; i.e. in
|
|
* Stereo mode the SWL equals DWL. SWL can be bigger than the
|
|
* product of (channels_per_slot x samplebits), e.g. for codecs
|
|
* like the AD1939 which only accept 32bit wide TDM slots. For
|
|
* "standard" I2S operation we set SWL = chans / 2 * DWL here.
|
|
* Waiting for ASoC to get TDM support ;-)
|
|
*/
|
|
if ((bits > 16) && (bits <= 24)) {
|
|
bits = 24; /* these are padded by the SSI */
|
|
/*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
|
|
}
|
|
i = 0;
|
|
swl = (bits * channels) / 2;
|
|
switch (swl) {
|
|
case 256: ++i;
|
|
case 128: ++i;
|
|
case 64: ++i;
|
|
case 48: ++i;
|
|
case 32: ++i;
|
|
case 16: ++i;
|
|
ssicr |= i << CR_SWL_SHIFT;
|
|
case 8: break;
|
|
default:
|
|
pr_debug("ssi: invalid system word length computed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
SSIREG(SSICR) = ssicr;
|
|
|
|
pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
|
|
return 0;
|
|
}
|
|
|
|
static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
|
|
|
|
ssi->sysclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This divider is used to generate the SSI_SCK (I2S bitclock) from the
|
|
* clock at the HAC_BIT_CLK ("oversampling clock") pin.
|
|
*/
|
|
static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
unsigned long ssicr;
|
|
int i;
|
|
|
|
i = 0;
|
|
ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
|
|
switch (div) {
|
|
case 16: ++i;
|
|
case 8: ++i;
|
|
case 4: ++i;
|
|
case 2: ++i;
|
|
SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
|
|
case 1: break;
|
|
default:
|
|
pr_debug("ssi: invalid sck divider %d\n", div);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
|
|
unsigned long ssicr = SSIREG(SSICR);
|
|
|
|
pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
|
|
|
|
ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
|
|
CR_SWS_MASTER | CR_SCK_MASTER);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
ssicr |= CR_DEL | CR_PDTA;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
ssicr |= CR_DEL;
|
|
break;
|
|
default:
|
|
pr_debug("ssi: unsupported format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
|
|
case SND_SOC_DAIFMT_CONT:
|
|
break;
|
|
case SND_SOC_DAIFMT_GATED:
|
|
ssicr |= CR_BREN;
|
|
break;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
ssicr |= CR_SCKP; /* sample data at low clkedge */
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
ssicr |= CR_SCKP | CR_SWSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
ssicr |= CR_SWSP; /* word select starts low */
|
|
break;
|
|
default:
|
|
pr_debug("ssi: invalid inversion\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
ssicr |= CR_SCK_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
ssicr |= CR_SWS_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
|
|
break;
|
|
default:
|
|
pr_debug("ssi: invalid master/slave configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
SSIREG(SSICR) = ssicr;
|
|
pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
|
|
* Master mode, so really this is board specific; the SSI can do any
|
|
* rate with the right bitclk and divider settings.
|
|
*/
|
|
#define SSI_RATES \
|
|
SNDRV_PCM_RATE_8000_192000
|
|
|
|
/* the SSI can do 8-32 bit samples, with 8 possible channels */
|
|
#define SSI_FMTS \
|
|
(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
|
|
SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
|
|
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
|
|
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
|
|
|
|
static struct snd_soc_dai_ops ssi_dai_ops = {
|
|
.startup = ssi_startup,
|
|
.shutdown = ssi_shutdown,
|
|
.trigger = ssi_trigger,
|
|
.hw_params = ssi_hw_params,
|
|
.set_sysclk = ssi_set_sysclk,
|
|
.set_clkdiv = ssi_set_clkdiv,
|
|
.set_fmt = ssi_set_fmt,
|
|
};
|
|
|
|
struct snd_soc_dai_driver sh4_ssi_dai[] = {
|
|
{
|
|
.name = "ssi-dai.0",
|
|
.playback = {
|
|
.rates = SSI_RATES,
|
|
.formats = SSI_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
},
|
|
.capture = {
|
|
.rates = SSI_RATES,
|
|
.formats = SSI_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
},
|
|
.ops = &ssi_dai_ops,
|
|
},
|
|
#ifdef CONFIG_CPU_SUBTYPE_SH7760
|
|
{
|
|
.name = "ssi-dai.1",
|
|
.playback = {
|
|
.rates = SSI_RATES,
|
|
.formats = SSI_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
},
|
|
.capture = {
|
|
.rates = SSI_RATES,
|
|
.formats = SSI_FMTS,
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
},
|
|
.ops = &ssi_dai_ops,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static int __devinit sh4_soc_dai_probe(struct platform_device *pdev)
|
|
{
|
|
return snd_soc_register_dais(&pdev->dev, sh4_ssi_dai,
|
|
ARRAY_SIZE(sh4_ssi_dai));
|
|
}
|
|
|
|
static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sh4_ssi_driver = {
|
|
.driver = {
|
|
.name = "sh4-ssi-dai",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = sh4_soc_dai_probe,
|
|
.remove = __devexit_p(sh4_soc_dai_remove),
|
|
};
|
|
|
|
static int __init snd_sh4_ssi_init(void)
|
|
{
|
|
return platform_driver_register(&sh4_ssi_driver);
|
|
}
|
|
module_init(snd_sh4_ssi_init);
|
|
|
|
static void __exit snd_sh4_ssi_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh4_ssi_driver);
|
|
}
|
|
module_exit(snd_sh4_ssi_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
|
|
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
|