mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 06:12:08 +00:00
84a867c078
Document ROHM BD71828 PMIC regulator device tree bindings. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/0985fec1cce98b1db66e5df2d9bcf2dfd9c224a7.1576054779.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
108 lines
3.5 KiB
YAML
108 lines
3.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ROHM BD71828 Power Management Integrated Circuit regulators
|
|
|
|
maintainers:
|
|
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
|
|
|
|
description: |
|
|
This module is part of the ROHM BD71828 MFD device. For more details
|
|
see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
|
|
|
|
The regulator controller is represented as a sub-node of the PMIC node
|
|
on the device tree.
|
|
|
|
Regulator nodes should be named to BUCK_<number> and LDO_<number>.
|
|
The valid names for BD71828 regulator nodes are
|
|
BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
|
|
LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
|
|
|
|
patternProperties:
|
|
"^LDO[1-7]$":
|
|
type: object
|
|
allOf:
|
|
- $ref: regulator.yaml#
|
|
description:
|
|
Properties for single LDO regulator.
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^ldo[1-7]$"
|
|
description:
|
|
should be "ldo1", ..., "ldo7"
|
|
|
|
"^BUCK[1-7]$":
|
|
type: object
|
|
allOf:
|
|
- $ref: regulator.yaml#
|
|
description:
|
|
Properties for single BUCK regulator.
|
|
|
|
properties:
|
|
regulator-name:
|
|
pattern: "^buck[1-7]$"
|
|
description:
|
|
should be "buck1", ..., "buck7"
|
|
|
|
rohm,dvs-run-voltage:
|
|
allOf:
|
|
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
|
- minimum: 0
|
|
maximum: 3300000
|
|
description:
|
|
PMIC default "RUN" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
|
|
rohm,dvs-idle-voltage:
|
|
allOf:
|
|
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
|
- minimum: 0
|
|
maximum: 3300000
|
|
description:
|
|
PMIC default "IDLE" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
|
|
rohm,dvs-suspend-voltage:
|
|
allOf:
|
|
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
|
- minimum: 0
|
|
maximum: 3300000
|
|
description:
|
|
PMIC default "SUSPEND" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
|
|
rohm,dvs-lpsr-voltage:
|
|
allOf:
|
|
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
|
- minimum: 0
|
|
maximum: 3300000
|
|
description:
|
|
PMIC default "LPSR" state voltage in uV. See below table for
|
|
bucks which support this. 0 means disabled.
|
|
|
|
# Supported default DVS states:
|
|
# buck | run | idle | suspend | lpsr
|
|
#--------------------------------------------------------------
|
|
# 1, 2, 6, and 7 | supported | supported | supported (*)
|
|
#--------------------------------------------------------------
|
|
# 3, 4, and 5 | supported (**)
|
|
#--------------------------------------------------------------
|
|
#
|
|
#(*) LPSR and SUSPEND states use same voltage but both states have own
|
|
# enable /
|
|
# disable settings. Voltage 0 can be specified for a state to make
|
|
# regulator disabled on that state.
|
|
#
|
|
#(**) All states use same voltage but have own enable / disable
|
|
# settings. Voltage 0 can be specified for a state to make
|
|
# regulator disabled on that state.
|
|
|
|
required:
|
|
- regulator-name
|
|
additionalProperties: false
|
|
additionalProperties: false
|