mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 13:11:40 +00:00
10904df3f2
USB4 specification defines the metadata needed to perform software margining, as well as the necessary steps which include waiting for dwell time. - Add dwell_time attribute to set the wait time while performing margining and checking for link errors. - Add error_counter attribute to configure error counter prior to margining test. - Add voltage_time_offset attribute to set the voltage or time offset steps before performing the software margining test. - Perform software margining test for dwell duration, break if there are link errors, stop the clocks and provide results. Below is a minimalistic example how this can be used. Note these values are just examples. The exact values in practice depend on host specific capabilities and the type of measurement to be performed. # cd /sys/kernel/debug/thunderbolt/ROUTER/portX/margining/ # echo software > mode # echo 400 > dwell_time # echo 1 > run As usual the results attribute contains the results of a succesfull run. Signed-off-by: R Kannappan <r.kannappan@intel.com> Co-developed-by: Rene Sapiens <rene.sapiens@intel.com> Signed-off-by: Rene Sapiens <rene.sapiens@intel.com> Co-developed-by: Aapo Vienamo <aapo.vienamo@linux.intel.com> Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
103 lines
4.0 KiB
C
103 lines
4.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* USB4 port sideband registers found on routers and retimers
|
|
*
|
|
* Copyright (C) 2020, Intel Corporation
|
|
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
* Rajmohan Mani <rajmohan.mani@intel.com>
|
|
*/
|
|
|
|
#ifndef _SB_REGS
|
|
#define _SB_REGS
|
|
|
|
#define USB4_SB_VENDOR_ID 0x00
|
|
#define USB4_SB_PRODUCT_ID 0x01
|
|
#define USB4_SB_FW_VERSION 0x02
|
|
#define USB4_SB_DEBUG_CONF 0x05
|
|
#define USB4_SB_DEBUG 0x06
|
|
#define USB4_SB_LRD_TUNING 0x07
|
|
#define USB4_SB_OPCODE 0x08
|
|
|
|
enum usb4_sb_opcode {
|
|
USB4_SB_OPCODE_ERR = 0x20525245, /* "ERR " */
|
|
USB4_SB_OPCODE_ONS = 0x444d4321, /* "!CMD" */
|
|
USB4_SB_OPCODE_ROUTER_OFFLINE = 0x4e45534c, /* "LSEN" */
|
|
USB4_SB_OPCODE_ENUMERATE_RETIMERS = 0x4d554e45, /* "ENUM" */
|
|
USB4_SB_OPCODE_SET_INBOUND_SBTX = 0x5055534c, /* "LSUP" */
|
|
USB4_SB_OPCODE_UNSET_INBOUND_SBTX = 0x50555355, /* "USUP" */
|
|
USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c, /* "LAST" */
|
|
USB4_SB_OPCODE_QUERY_CABLE_RETIMER = 0x524c4243, /* "CBLR" */
|
|
USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47, /* "GNSS" */
|
|
USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42, /* "BOPS" */
|
|
USB4_SB_OPCODE_NVM_BLOCK_WRITE = 0x574b4c42, /* "BLKW" */
|
|
USB4_SB_OPCODE_NVM_AUTH_WRITE = 0x48545541, /* "AUTH" */
|
|
USB4_SB_OPCODE_NVM_READ = 0x52524641, /* "AFRR" */
|
|
USB4_SB_OPCODE_READ_LANE_MARGINING_CAP = 0x50434452, /* "RDCP" */
|
|
USB4_SB_OPCODE_RUN_HW_LANE_MARGINING = 0x474d4852, /* "RHMG" */
|
|
USB4_SB_OPCODE_RUN_SW_LANE_MARGINING = 0x474d5352, /* "RSMG" */
|
|
USB4_SB_OPCODE_READ_SW_MARGIN_ERR = 0x57534452, /* "RDSW" */
|
|
};
|
|
|
|
#define USB4_SB_METADATA 0x09
|
|
#define USB4_SB_METADATA_NVM_AUTH_WRITE_MASK GENMASK(5, 0)
|
|
#define USB4_SB_LINK_CONF 0x0c
|
|
#define USB4_SB_GEN23_TXFFE 0x0d
|
|
#define USB4_SB_GEN4_TXFFE 0x0e
|
|
#define USB4_SB_VERSION 0x0f
|
|
#define USB4_SB_DATA 0x12
|
|
|
|
/* USB4_SB_OPCODE_READ_LANE_MARGINING_CAP */
|
|
#define USB4_MARGIN_CAP_0_MODES_HW BIT(0)
|
|
#define USB4_MARGIN_CAP_0_MODES_SW BIT(1)
|
|
#define USB4_MARGIN_CAP_0_2_LANES BIT(2)
|
|
#define USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK GENMASK(4, 3)
|
|
#define USB4_MARGIN_CAP_0_VOLTAGE_MIN 0x0
|
|
#define USB4_MARGIN_CAP_0_VOLTAGE_HL 0x1
|
|
#define USB4_MARGIN_CAP_0_VOLTAGE_BOTH 0x2
|
|
#define USB4_MARGIN_CAP_0_TIME BIT(5)
|
|
#define USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK GENMASK(12, 6)
|
|
#define USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK GENMASK(18, 13)
|
|
#define USB4_MARGIN_CAP_0_OPT_VOLTAGE_SUPPORT BIT(19)
|
|
#define USB4_MARGIN_CAP_0_VOLT_STEPS_OPT_MASK GENMASK(26, 20)
|
|
#define USB4_MARGIN_CAP_1_MAX_VOLT_OFS_OPT_MASK GENMASK(7, 0)
|
|
#define USB4_MARGIN_CAP_1_TIME_DESTR BIT(8)
|
|
#define USB4_MARGIN_CAP_1_TIME_INDP_MASK GENMASK(10, 9)
|
|
#define USB4_MARGIN_CAP_1_TIME_MIN 0x0
|
|
#define USB4_MARGIN_CAP_1_TIME_LR 0x1
|
|
#define USB4_MARGIN_CAP_1_TIME_BOTH 0x2
|
|
#define USB4_MARGIN_CAP_1_TIME_STEPS_MASK GENMASK(15, 11)
|
|
#define USB4_MARGIN_CAP_1_TIME_OFFSET_MASK GENMASK(20, 16)
|
|
#define USB4_MARGIN_CAP_1_MIN_BER_MASK GENMASK(25, 21)
|
|
#define USB4_MARGIN_CAP_1_MAX_BER_MASK GENMASK(30, 26)
|
|
|
|
/* USB4_SB_OPCODE_RUN_HW_LANE_MARGINING */
|
|
#define USB4_MARGIN_HW_TIME BIT(3)
|
|
#define USB4_MARGIN_HW_RH BIT(4)
|
|
#define USB4_MARGIN_HW_BER_MASK GENMASK(9, 5)
|
|
#define USB4_MARGIN_HW_BER_SHIFT 5
|
|
#define USB4_MARGIN_HW_OPT_VOLTAGE BIT(10)
|
|
|
|
/* Applicable to all margin values */
|
|
#define USB4_MARGIN_HW_RES_1_MARGIN_MASK GENMASK(6, 0)
|
|
#define USB4_MARGIN_HW_RES_1_EXCEEDS BIT(7)
|
|
/* Different lane margin shifts */
|
|
#define USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT 8
|
|
#define USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT 16
|
|
#define USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT 24
|
|
|
|
/* USB4_SB_OPCODE_RUN_SW_LANE_MARGINING */
|
|
#define USB4_MARGIN_SW_LANES_MASK GENMASK(2, 0)
|
|
#define USB4_MARGIN_SW_LANE_0 0x0
|
|
#define USB4_MARGIN_SW_LANE_1 0x1
|
|
#define USB4_MARGIN_SW_ALL_LANES 0x7
|
|
#define USB4_MARGIN_SW_TIME BIT(3)
|
|
#define USB4_MARGIN_SW_RH BIT(4)
|
|
#define USB4_MARGIN_SW_OPT_VOLTAGE BIT(5)
|
|
#define USB4_MARGIN_SW_VT_MASK GENMASK(12, 6)
|
|
#define USB4_MARGIN_SW_COUNTER_MASK GENMASK(14, 13)
|
|
|
|
#define USB4_MARGIN_SW_ERR_COUNTER_LANE_0_MASK GENMASK(3, 0)
|
|
#define USB4_MARGIN_SW_ERR_COUNTER_LANE_1_MASK GENMASK(7, 4)
|
|
|
|
#endif
|