mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 20:32:22 +00:00
dd43193976
pmbus_do_probe doesn't use the id information provided in its second
argument, so this can be removed, which then allows using the
single-parameter i2c probe function ("probe_new") for probes.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:
* if the information in i2c_client is sufficient, that's used instead
(client->name);
* configured v. probed comparisons are performed by comparing the
configured name to the detected name, instead of the ids; this
involves strcmp but is still cheaper than comparing all the device
names when scanning the tables;
* anything else is handled by calling i2c_match_id() with the same
level of error-handling (if any) as before.
Additionally, the mismatch message in the ltc2978 driver is adjusted
so that it no longer assumes that the driver_data is an index into
ltc2978_id.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
402 lines
8.9 KiB
C
402 lines
8.9 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2017 IBM Corp.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include "pmbus.h"
|
|
|
|
enum max31785_regs {
|
|
MFR_REVISION = 0x9b,
|
|
MFR_FAN_CONFIG = 0xf1,
|
|
};
|
|
|
|
#define MAX31785 0x3030
|
|
#define MAX31785A 0x3040
|
|
|
|
#define MFR_FAN_CONFIG_DUAL_TACH BIT(12)
|
|
|
|
#define MAX31785_NR_PAGES 23
|
|
#define MAX31785_NR_FAN_PAGES 6
|
|
|
|
static int max31785_read_byte_data(struct i2c_client *client, int page,
|
|
int reg)
|
|
{
|
|
if (page < MAX31785_NR_PAGES)
|
|
return -ENODATA;
|
|
|
|
switch (reg) {
|
|
case PMBUS_VOUT_MODE:
|
|
return -ENOTSUPP;
|
|
case PMBUS_FAN_CONFIG_12:
|
|
return pmbus_read_byte_data(client, page - MAX31785_NR_PAGES,
|
|
reg);
|
|
}
|
|
|
|
return -ENODATA;
|
|
}
|
|
|
|
static int max31785_write_byte(struct i2c_client *client, int page, u8 value)
|
|
{
|
|
if (page < MAX31785_NR_PAGES)
|
|
return -ENODATA;
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int max31785_read_long_data(struct i2c_client *client, int page,
|
|
int reg, u32 *data)
|
|
{
|
|
unsigned char cmdbuf[1];
|
|
unsigned char rspbuf[4];
|
|
int rc;
|
|
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = sizeof(cmdbuf),
|
|
.buf = cmdbuf,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = sizeof(rspbuf),
|
|
.buf = rspbuf,
|
|
},
|
|
};
|
|
|
|
cmdbuf[0] = reg;
|
|
|
|
rc = pmbus_set_page(client, page, 0xff);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
*data = (rspbuf[0] << (0 * 8)) | (rspbuf[1] << (1 * 8)) |
|
|
(rspbuf[2] << (2 * 8)) | (rspbuf[3] << (3 * 8));
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int max31785_get_pwm(struct i2c_client *client, int page)
|
|
{
|
|
int rv;
|
|
|
|
rv = pmbus_get_fan_rate_device(client, page, 0, percent);
|
|
if (rv < 0)
|
|
return rv;
|
|
else if (rv >= 0x8000)
|
|
return 0;
|
|
else if (rv >= 0x2711)
|
|
return 0x2710;
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int max31785_get_pwm_mode(struct i2c_client *client, int page)
|
|
{
|
|
int config;
|
|
int command;
|
|
|
|
config = pmbus_read_byte_data(client, page, PMBUS_FAN_CONFIG_12);
|
|
if (config < 0)
|
|
return config;
|
|
|
|
command = pmbus_read_word_data(client, page, 0xff, PMBUS_FAN_COMMAND_1);
|
|
if (command < 0)
|
|
return command;
|
|
|
|
if (config & PB_FAN_1_RPM)
|
|
return (command >= 0x8000) ? 3 : 2;
|
|
|
|
if (command >= 0x8000)
|
|
return 3;
|
|
else if (command >= 0x2711)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int max31785_read_word_data(struct i2c_client *client, int page,
|
|
int phase, int reg)
|
|
{
|
|
u32 val;
|
|
int rv;
|
|
|
|
switch (reg) {
|
|
case PMBUS_READ_FAN_SPEED_1:
|
|
if (page < MAX31785_NR_PAGES)
|
|
return -ENODATA;
|
|
|
|
rv = max31785_read_long_data(client, page - MAX31785_NR_PAGES,
|
|
reg, &val);
|
|
if (rv < 0)
|
|
return rv;
|
|
|
|
rv = (val >> 16) & 0xffff;
|
|
break;
|
|
case PMBUS_FAN_COMMAND_1:
|
|
/*
|
|
* PMBUS_FAN_COMMAND_x is probed to judge whether or not to
|
|
* expose fan control registers.
|
|
*
|
|
* Don't expose fan_target attribute for virtual pages.
|
|
*/
|
|
rv = (page >= MAX31785_NR_PAGES) ? -ENOTSUPP : -ENODATA;
|
|
break;
|
|
case PMBUS_VIRT_PWM_1:
|
|
rv = max31785_get_pwm(client, page);
|
|
break;
|
|
case PMBUS_VIRT_PWM_ENABLE_1:
|
|
rv = max31785_get_pwm_mode(client, page);
|
|
break;
|
|
default:
|
|
rv = -ENODATA;
|
|
break;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static inline u32 max31785_scale_pwm(u32 sensor_val)
|
|
{
|
|
/*
|
|
* The datasheet describes the accepted value range for manual PWM as
|
|
* [0, 0x2710], while the hwmon pwmX sysfs interface accepts values in
|
|
* [0, 255]. The MAX31785 uses DIRECT mode to scale the FAN_COMMAND
|
|
* registers and in PWM mode the coefficients are m=1, b=0, R=2. The
|
|
* important observation here is that 0x2710 == 10000 == 100 * 100.
|
|
*
|
|
* R=2 (== 10^2 == 100) accounts for scaling the value provided at the
|
|
* sysfs interface into the required hardware resolution, but it does
|
|
* not yet yield a value that we can write to the device (this initial
|
|
* scaling is handled by pmbus_data2reg()). Multiplying by 100 below
|
|
* translates the parameter value into the percentage units required by
|
|
* PMBus, and then we scale back by 255 as required by the hwmon pwmX
|
|
* interface to yield the percentage value at the appropriate
|
|
* resolution for hardware.
|
|
*/
|
|
return (sensor_val * 100) / 255;
|
|
}
|
|
|
|
static int max31785_pwm_enable(struct i2c_client *client, int page,
|
|
u16 word)
|
|
{
|
|
int config = 0;
|
|
int rate;
|
|
|
|
switch (word) {
|
|
case 0:
|
|
rate = 0x7fff;
|
|
break;
|
|
case 1:
|
|
rate = pmbus_get_fan_rate_cached(client, page, 0, percent);
|
|
if (rate < 0)
|
|
return rate;
|
|
rate = max31785_scale_pwm(rate);
|
|
break;
|
|
case 2:
|
|
config = PB_FAN_1_RPM;
|
|
rate = pmbus_get_fan_rate_cached(client, page, 0, rpm);
|
|
if (rate < 0)
|
|
return rate;
|
|
break;
|
|
case 3:
|
|
rate = 0xffff;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return pmbus_update_fan(client, page, 0, config, PB_FAN_1_RPM, rate);
|
|
}
|
|
|
|
static int max31785_write_word_data(struct i2c_client *client, int page,
|
|
int reg, u16 word)
|
|
{
|
|
switch (reg) {
|
|
case PMBUS_VIRT_PWM_1:
|
|
return pmbus_update_fan(client, page, 0, 0, PB_FAN_1_RPM,
|
|
max31785_scale_pwm(word));
|
|
case PMBUS_VIRT_PWM_ENABLE_1:
|
|
return max31785_pwm_enable(client, page, word);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -ENODATA;
|
|
}
|
|
|
|
#define MAX31785_FAN_FUNCS \
|
|
(PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_PWM12)
|
|
|
|
#define MAX31785_TEMP_FUNCS \
|
|
(PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
|
|
|
|
#define MAX31785_VOUT_FUNCS \
|
|
(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT)
|
|
|
|
static const struct pmbus_driver_info max31785_info = {
|
|
.pages = MAX31785_NR_PAGES,
|
|
|
|
.write_word_data = max31785_write_word_data,
|
|
.read_byte_data = max31785_read_byte_data,
|
|
.read_word_data = max31785_read_word_data,
|
|
.write_byte = max31785_write_byte,
|
|
|
|
/* RPM */
|
|
.format[PSC_FAN] = direct,
|
|
.m[PSC_FAN] = 1,
|
|
.b[PSC_FAN] = 0,
|
|
.R[PSC_FAN] = 0,
|
|
/* PWM */
|
|
.format[PSC_PWM] = direct,
|
|
.m[PSC_PWM] = 1,
|
|
.b[PSC_PWM] = 0,
|
|
.R[PSC_PWM] = 2,
|
|
.func[0] = MAX31785_FAN_FUNCS,
|
|
.func[1] = MAX31785_FAN_FUNCS,
|
|
.func[2] = MAX31785_FAN_FUNCS,
|
|
.func[3] = MAX31785_FAN_FUNCS,
|
|
.func[4] = MAX31785_FAN_FUNCS,
|
|
.func[5] = MAX31785_FAN_FUNCS,
|
|
|
|
.format[PSC_TEMPERATURE] = direct,
|
|
.m[PSC_TEMPERATURE] = 1,
|
|
.b[PSC_TEMPERATURE] = 0,
|
|
.R[PSC_TEMPERATURE] = 2,
|
|
.func[6] = MAX31785_TEMP_FUNCS,
|
|
.func[7] = MAX31785_TEMP_FUNCS,
|
|
.func[8] = MAX31785_TEMP_FUNCS,
|
|
.func[9] = MAX31785_TEMP_FUNCS,
|
|
.func[10] = MAX31785_TEMP_FUNCS,
|
|
.func[11] = MAX31785_TEMP_FUNCS,
|
|
.func[12] = MAX31785_TEMP_FUNCS,
|
|
.func[13] = MAX31785_TEMP_FUNCS,
|
|
.func[14] = MAX31785_TEMP_FUNCS,
|
|
.func[15] = MAX31785_TEMP_FUNCS,
|
|
.func[16] = MAX31785_TEMP_FUNCS,
|
|
|
|
.format[PSC_VOLTAGE_OUT] = direct,
|
|
.m[PSC_VOLTAGE_OUT] = 1,
|
|
.b[PSC_VOLTAGE_OUT] = 0,
|
|
.R[PSC_VOLTAGE_OUT] = 0,
|
|
.func[17] = MAX31785_VOUT_FUNCS,
|
|
.func[18] = MAX31785_VOUT_FUNCS,
|
|
.func[19] = MAX31785_VOUT_FUNCS,
|
|
.func[20] = MAX31785_VOUT_FUNCS,
|
|
.func[21] = MAX31785_VOUT_FUNCS,
|
|
.func[22] = MAX31785_VOUT_FUNCS,
|
|
};
|
|
|
|
static int max31785_configure_dual_tach(struct i2c_client *client,
|
|
struct pmbus_driver_info *info)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) {
|
|
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_word_data(client, MFR_FAN_CONFIG);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & MFR_FAN_CONFIG_DUAL_TACH) {
|
|
int virtual = MAX31785_NR_PAGES + i;
|
|
|
|
info->pages = virtual + 1;
|
|
info->func[virtual] |= PMBUS_HAVE_FAN12;
|
|
info->func[virtual] |= PMBUS_PAGE_VIRTUAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max31785_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct pmbus_driver_info *info;
|
|
bool dual_tach = false;
|
|
s64 ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
*info = max31785_info;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_word_data(client, MFR_REVISION);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret == MAX31785A) {
|
|
dual_tach = true;
|
|
} else if (ret == MAX31785) {
|
|
if (!strcmp("max31785a", client->name))
|
|
dev_warn(dev, "Expected max3175a, found max31785: cannot provide secondary tachometer readings\n");
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dual_tach) {
|
|
ret = max31785_configure_dual_tach(client, info);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return pmbus_do_probe(client, info);
|
|
}
|
|
|
|
static const struct i2c_device_id max31785_id[] = {
|
|
{ "max31785", 0 },
|
|
{ "max31785a", 0 },
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, max31785_id);
|
|
|
|
static const struct of_device_id max31785_of_match[] = {
|
|
{ .compatible = "maxim,max31785" },
|
|
{ .compatible = "maxim,max31785a" },
|
|
{ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, max31785_of_match);
|
|
|
|
static struct i2c_driver max31785_driver = {
|
|
.driver = {
|
|
.name = "max31785",
|
|
.of_match_table = max31785_of_match,
|
|
},
|
|
.probe_new = max31785_probe,
|
|
.remove = pmbus_do_remove,
|
|
.id_table = max31785_id,
|
|
};
|
|
|
|
module_i2c_driver(max31785_driver);
|
|
|
|
MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
|
|
MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785");
|
|
MODULE_LICENSE("GPL");
|