linux/drivers/hwmon/pmbus/max16064.c
Stephen Kitt dd43193976 hwmon (pmbus) use simple i2c probe function
pmbus_do_probe doesn't use the id information provided in its second
argument, so this can be removed, which then allows using the
single-parameter i2c probe function ("probe_new") for probes.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* configured v. probed comparisons are performed by comparing the
  configured name to the detected name, instead of the ids; this
  involves strcmp but is still cheaper than comparing all the device
  names when scanning the tables;
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

Additionally, the mismatch message in the ltc2978 driver is adjusted
so that it no longer assumes that the driver_data is an index into
ltc2978_id.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:39 -07:00

115 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for Maxim MAX16064
*
* Copyright (c) 2011 Ericsson AB.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include "pmbus.h"
#define MAX16064_MFR_VOUT_PEAK 0xd4
#define MAX16064_MFR_TEMPERATURE_PEAK 0xd6
static int max16064_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
int ret;
switch (reg) {
case PMBUS_VIRT_READ_VOUT_MAX:
ret = pmbus_read_word_data(client, page, phase,
MAX16064_MFR_VOUT_PEAK);
break;
case PMBUS_VIRT_READ_TEMP_MAX:
ret = pmbus_read_word_data(client, page, phase,
MAX16064_MFR_TEMPERATURE_PEAK);
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = 0;
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static int max16064_write_word_data(struct i2c_client *client, int page,
int reg, u16 word)
{
int ret;
switch (reg) {
case PMBUS_VIRT_RESET_VOUT_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX16064_MFR_VOUT_PEAK, 0);
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX16064_MFR_TEMPERATURE_PEAK,
0xffff);
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static struct pmbus_driver_info max16064_info = {
.pages = 4,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_TEMPERATURE] = direct,
.m[PSC_VOLTAGE_IN] = 19995,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = -1,
.m[PSC_VOLTAGE_OUT] = 19995,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = -1,
.m[PSC_TEMPERATURE] = -7612,
.b[PSC_TEMPERATURE] = 335,
.R[PSC_TEMPERATURE] = -3,
.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP,
.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
.read_word_data = max16064_read_word_data,
.write_word_data = max16064_write_word_data,
};
static int max16064_probe(struct i2c_client *client)
{
return pmbus_do_probe(client, &max16064_info);
}
static const struct i2c_device_id max16064_id[] = {
{"max16064", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, max16064_id);
/* This is the driver that will be inserted */
static struct i2c_driver max16064_driver = {
.driver = {
.name = "max16064",
},
.probe_new = max16064_probe,
.remove = pmbus_do_remove,
.id_table = max16064_id,
};
module_i2c_driver(max16064_driver);
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064");
MODULE_LICENSE("GPL");